Debian Configuration :: 8.0 With GNOME 32bit - WiFi Connection With WPA2

Apr 12, 2016

I'm using Debian 8 with GNOME 32bit. I installed a driver with ndiswrapper for my old D-Link DWL-G650M.

If i using the default network manager to connect with a Free wifi the connection works fine. But if the wifi have the password the connection doesn't work.

I. using my phone Android to create the Router-Wifi like this:

SSID: AndroidAP5
Password: BillyBob
Encryption(the one allowed): WPA2 PSK

With network manager gnome is impossible to connect. I changed in setting the password type with WPA2 but the system doesn't connect.

I tried to connect manually and i updated the file /etc/network/interfaces as the follow:

Code: Select allauto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid AndroidAP5
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk 18[...]

After this I tried to execute the follow command :

Code: Select all/etc/init.d/networking restart

And the system returns:

Code: Select all[  ok  ] Restarting networking (via systemctl): networking.service

but nothing else happens. The internet connection doesn't work. The Android phone not detect PC connection IN.

View 3 Replies


ADVERTISEMENT

Software :: Wicd WiFi Connection Fails - Bad Password -wpa2

Nov 27, 2010

I am running Ubuntu 10.04 on a PackardBell notebook and have just got an Orange Livebox 2 for broadband connection(after years of dial-up as no adsl in my area).

I am trying to connect via WiFi to the Livebox to configure, but neither NetworkManager nor Wicd will connect. NM sees the Livebox but simply fails to connect after trying; Wicd says "Bad password". The WPA2 password I have entered is definitely correct, and I have connected without any problem from an AcerOne under Linpus.

I have also tried to connect using Wicd and an ethernet cable, and this doesn't connect either, returning "Connection Failed: Unable to Get IP Address"

View 9 Replies View Related

Debian Configuration :: WiFi Connection Which Then Is Sent To A Wired Connection

Sep 22, 2015

The situation: The office has a WiFi network on one DSL line, which is used for our VoIP call center, and a wired network for our internal network and the majority of web surfing/traffic . Part of the office must be temperature controlled/monitored - we have a rather nice digital thermometer which is WiFi enabled.I have a Debian Wheezy box with a WiFi card and ethernet connection

What I'm trying to accomplish:Connect wifi enabled thermometer to WiFi network so it can automatically send temp updates (currently I have to do it manually via USB)Have the Wheezy box accept the downloaded file then send it to a back up server in the wired network

Side things that may be useful : Prefer to use wired connection for internet and apt and suchWiFi connection will really just be used for connecting to the thermometer

This [URL] .... topic got me thinking that there might be a way to bring the two networks together, but I don't know if that will wreak havoc on things. I know, the Windows and Mac OS don't like having ethernet and wifi at the same time, might Linux be better for this?

v&n had this to offer in the prior thread [URL] .... which I'll be doing more research on.

View 2 Replies View Related

Ubuntu Networking :: Wicd WiFi Connection Fails / Bad Password Wpa2

Nov 27, 2010

I am running Ubuntu 10.04 on a PackardBell notebook and have just got an Orange Livebox 2 for broadband connection(after years of dial-up as no adsl in my area).I am trying to connect via WiFi to the Livebox to configure, but neither NetworkManager nor Wicd will connect. NM sees the Livebox but simply fails to connect after trying; Wicd says "Bad password".The WPA2 password I have entered is definitely correct, and I have connected without any problem from an AcerOne under Linpus.I have also tried to connect using Wicd and an ethernet cable, and this doesn't connect either, returning "Connection Failed: Unable to Get IP Address"

View 1 Replies View Related

Debian Configuration :: WiFi Connection Isn't Working After Install?

Mar 27, 2016

I just installed the lastest stable Debian (gnome) today and what I was most afraid just happened: my laptop's wifi isn't working properly, it isn't turning on. This had already hapened on livecd.

In the laptop's chassis leds, the wifi led apears as green. When I click to turn on the wifi, as shown on the picture the button, quickly disappears and appears again not seeming to have any effect at all at turning on the wifi but not showing any error either!

Picture :

What's interesting about the wifi not working is that in the installation process I was able to connect to a wifi hotspot and it connected to the internet fine!

Now after installation was complete and my system did the reboot, I was no longer able to connect to the internet using wifi.

My wireless card is Atheros AR9565 and my LAN card is also Atheros.

Here is an output of lspci and lsmod which may have some leads about the problem.

lspci

Code: Select allquant@debian:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)

[Code] ....

Noticed:

1. I installed WiFi radar and I ran this on the terminal:

# sudo ifconfig wlan0 up

View 10 Replies View Related

Debian Configuration :: WiFi Connection Stuck At (Setting Network Address)

Oct 9, 2015

I have Debian 8.2 with KDE 4.14 and everything runs perfect, except for the internet connection. This problem happens randomly when I turn on my machine. Sometimes when the desktop loads, the connection is already settled.

But sometimes when the desktop loads, the wifi icon is still loading and keeps stuck at "setting network address". Since this problem happens randomly I really don't know what is happening here. My wifi chip is this:

Code: Select all01:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34)

This is the problem:

I installed Debian with non-free firmware because of this chip.

View 6 Replies View Related

Debian Configuration :: IPTables Logging Rules Dropping WiFi Connection

Dec 1, 2015

I'm trying to use these cookie cutter rules that I found. But every time I use them, after a few seconds my wifi connection goes dead. The exception was the first time I used then. Which lasted me a couple of minutes.

By dead I mean I can no longer open a webpage or ping google.

iptables -N LOGGING
iptables -A INPUT -j LOGGING
iptables -A OUTPUT -j LOGGING
iptables -A LOGGING -m limit --limit 2/min -j LOG --log-prefix "IPTables-Dropped: " --log-level 4
iptables -A LOGGING -j DROP

View 9 Replies View Related

OpenSUSE :: Migrate The Gnome Configuration From 32bit To 64bit SUSE?

Apr 27, 2011

My new HP625 Laptop came with SLED11 preconfigured - including such special keys as the wireless/bluetooth key etc under gnome. I need a 64bit OS and 8Gb for my applications and the HP site does not offer any explicit support for 64bit Linux. So I installed SLED64bit on separate system partition and can select now 32 or 64 bit from GRUB. There remains the problem of configuring gnome (or KDE) on the 64bit system to take advantage of the keyboard, sound, cam etc. I did find a 64bit wireless driver in the i586-Repo on the HP-site that requires the kernel from opensuse 11.3 and I got bluetooth working with gnome but just for the keyboard alone, I am stuck with finding a decent configuration under 64bit. Is it possible to migrate the system wide gnome configuration from the SLED32 bit installation (as configured by HP) to any SuSEx86_64 system?

View 9 Replies View Related

Debian Configuration :: Can't Connect To WPA2 Network

Aug 31, 2011

I have a laptop (running Arch Linux) and a desktop. Until recently my desktop computer ran Arch but I'm taking Debian for a spin now. At my home there is a wireless network with WPA2 encoding. I use the wicd gui to connect to this. I assume, that since I can see the SSID in the wicd window, all drivers are correctly installed and functioning. On my Arch computer, wicd reports this SSID as having WPA2 encoding, but on the Debian computer, it shows up as WEP. Even when I choose the correct encryption thing, WPA2 (preshared key), and put the correct password in, I can't get a connection up.

View 6 Replies View Related

Debian Configuration :: Connecting To Hidden SSID Over WPA2

Jan 24, 2016

I've been searching and trying to correct this problem for nigh on 12 hours. I would like to note that I know that hidden SSID are not necessarily much more secure. I have no permission to change the settings where I am. I'm running Debian Jessie. I have no way to get the server a connection other than the WiFi dongle I'm using. I have installed the correct WPA_Supplicant and Wireless Tools for my architecture/distro/version. I also have solved a sub-problem I had earlier; that the drivers for my WiFi dongle come with the kernel, but the firmware does not. That was remedied.

I can see my SSID in my iwlist scan. (iwlist scan | grep ESSID). My current /etc/network/interfaces looks like this:

Code: Select allauto wlan0
     iface wlan0 inet dhcp
     wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
My current /etc/wpa_supplicant/wpa_supplicant.conf looks like this:
Code: Select allnetwork={
     ssid="hundley_1"
     psk=HashedPSK
     scan_ssid=1
}

The original .conf was created by using wpa_passphrase "hundley_1" PASSWORD >

/etc/wpa_supplicant/wpa_supplicant.conf I know for a fact that the security key is correct. I edited the .conf produced to what it is now.

Usign ifup wlan0 and ifdown wlan0 to start and restart the connection yields an error. The gist of the error is:

NO DHCPOFFERS recieved

View 2 Replies View Related

Debian :: Running Squeeze 32bit With Gnome-core Installed?

Jul 10, 2010

I am running Debian Squeeze 32bit with gnome-core installed. When I alter the acceleration or sensitivity within the pointer speed section of gnome-mouse-properties, my mouse does not act differently. Has anyone else encountered this problem? How can I change my mouse sensitivity? I have installed Debian Lenny previously and I recall that I was capable of changing the sensitivity.

View 1 Replies View Related

Debian Configuration :: Compiling Bitlbee And Libpurple In Lenny 32bit?

Mar 15, 2011

I am using bitlbee 1.0.3 with ircII for a long time since etch is released. Mainly for MSN, Jabber, Yahoo, Sametime communications. But the old version lacks MSN offline message and sametime protocol support and the yahoo protocol doesn't work at all. Does anyone successful in compiling bitlbee and libpurple in lenny 32bit?

View 3 Replies View Related

Debian Configuration :: Disable Framebuffer After Squeeze 32bit Installation?

Apr 5, 2011

I'm installing a non-X server using squeeze 32bit netinst iso, expert installation. I don't know that I can specify "debian-installer/framebuffer=false" during the installation, after reboot I got a framebuffer display with console fonts smaller and fonts look like ubuntu. I search around I can edit GRUB config for the resolution items or disable framebuffer. How can I disable the framebuffer (use normal text system fonts) when booting in LILO?

I got everything installed and setuped, I don't want to re-install the OS again.

View 8 Replies View Related

Debian Configuration :: NVIDIA Driver 32bit Chroot On 64bit Host?

Mar 23, 2011

I have 64bit debian 6 squeeze installed on my 64bit pc. I have an NVIDIA gpu which I have installed the drivers for and they work just fine. I also have a 32 bit chroot located at /32 which was created using debootstrap. The NVIDIA 64bit driver gives the option to install compatability driver libraries into the 32bit chroot. Whenever I run any application that uses opengl rendering within the chroot, they segfault. When I uninstalled and reinstalled the NVIDIA driver without installing the libraries to the chroot, and instead replaced them with mesa gl libraries, the programs complain about framebuffer missing. They do not segfault, and some programs that can use sdl instead will work fine. I have xhost + set to allow any programs in the chroot to use the host's xorg. I have the host's proc mounted to the chroot proc directory, and i also have dev mount --bind 'ed to the chroot.

View 11 Replies View Related

Ubuntu Networking :: Authentication Error If WiFi Is Configured For WPA & WPA2

Jun 9, 2010

I am using an eeePC with Xubuntu Lucid and I just configured a wireless network to run with WPA & WPA2 (wireless access point NetGear WG103). It tries to connect and then comes back with a request for reentering the passphrase. I have had this once before in a pub. The way I read this the driver is getting confused how to authenticate.

View 1 Replies View Related

Ubuntu Networking :: Connect Via Terminal To A Wifi Network WPA2 - 10.04

Nov 16, 2010

Im trying to connect to my wireless network via terminal. My wifi network has a WPA2 encription. Im running ubuntu server 10.04. wifi interfaces are active, i can "see" my network with airodump. The only thing is i dont really know how to configure my iwconfig to connect to it.

View 2 Replies View Related

Debian Configuration :: Xfinity WiFi Configuration

Feb 22, 2016

I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan

BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm

[code]...

View 0 Replies View Related

Ubuntu Networking :: WiFi With Wpa2 Encryption Doesn't Connect On Startup

Dec 27, 2010

I have xbmc, a media center shell that runs on ubuntu. I am trying to set up a laptop to run it and be a full time media center. so far it works great, I installed xbmc live, but the only issue is I have a wep2 protected wireless router and the wifi does not connect automatically.

I have it set up and am using wpa_supplicant once those commands are run the wifi works great.I am a novice in linux in general, and can not seem to get this to work on startup, can anyone point me in the right direction on this? I haven't been able to find the xbmc start up script if one exists, I figured adding those lines to it might work,does this sound like a reasonable approach? if anyone knows where that is and how it is defined to be launched on start-up i would appreciate it(I guess this is getting into the general Linux knowledge but still good info)

View 2 Replies View Related

General :: Debian - Gnome: Wireless Connection List Missing Connection?

Nov 12, 2009

Each time I start up debian -lenny, the network-manager does not automatically connect me to my wireless network. The connection list shows a lot of networks available, but mine is always absent from the list. This means I each time have to go to "Connect to other Wireless Network" in and write in my network name (SSID) and password (PWA2 Personal). Then is connects nicely and everything works fine until next time I boot

View 5 Replies View Related

Debian Configuration :: Connection WPA Personal Says Connected To Wl Network But No Internet Connection

Apr 15, 2011

1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:

[code]....

I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.

View 4 Replies View Related

Debian Configuration :: Is It 64bit Kernel Or 32bit Kernel Optimized For Amd64 Architecture?

Jan 24, 2010

I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?

View 12 Replies View Related

Ubuntu Networking :: Wpa2-aes - Can't Get A Stable Connection

May 16, 2010

Does anyone have a way to use this type of encryption? I have read many posts but have not gotten a solution yet. I am trying to get this to work at a friend's house. I know the SSID and the super-long ascii code (with symbols?). gnome nm and wicd have been useless. I have been connecting to my school's wpa2 using wpa_supplicant + dhclient directly, so I tried adding it in there:

network={
ssid="name"
scan_ssid=0
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
psk="horribly long thing"
}

What happens is a string of connects and then immediate disconnects when runnign wpa_supplicant. It says "CTRL-EVENT-DISCONNECTED - disconnect event - remove keys" then starts all over. Can't get a stable connection but I must be close?

View 1 Replies View Related

Configuration :: How To Use Wifi On Debian

Jul 18, 2010

My pc is aser aspire 5735z. I have acer nplify 802.11b/g draft-n wlan
but i can use wifi on debian
what i have to do ?
Do i need driver or firmware?
how can i solve this problem ?

View 5 Replies View Related

Fedora :: Set Up A WPA2 Wireless Connection Using The Ifcfg Method?

Dec 8, 2009

NetworkManager is a powerful tool for setting up a wlan connection, especially if you connect the laptop to multiple access points. One drawback is that the user accounts must be given access to the pass
phrase. Another is that there is no wlan connection in run level 3, because nm-applet is an X application.If you connect to the same access point all the time, e.g., your own wireless router, a permanent connection via ifcfg might be more convenient. It is controlled by root. All user accounts have wireless access without knowing the underlying details. Further, there is a wireless connection in run level 3. After a lot of trial and error and Google searches, I was able to put together this guide by splicing together one step used in Slackware (from Alienbob's web page) with other steps outlined in this online article http://home.roadrunner.com/~computer...hwireless.html.

It is assumed that the appropriate kernel module for the wlan card is installed and that
$ iwconfigshows a viable wlan0 interface. We are using DHCP. (If using static IP, edit ifcfg-wlan0.)The following steps work on a Compaq Presario F756NR notebook with a Atheros AR242x 802.11abg WLAN card using the ath5k kernel module (without madwifi). I am using 64-bit F12. All commands are executed as root.1. $ yum install wpa_supplicant dhclientProbably already installed, especially dhclient. If so, skip.2. $ cd /etc/sysconfig && vi wpa_supplicantInsert the following lines:

INTERFACES="-iwlan0"
DRIVERS="-Dwext"
OTHER_ARGS="-f /var/log/wpa_supplicant.log"

[code]....

View 1 Replies View Related

Ubuntu Networking :: WPA2 Static IP Gives The Right IP But NO Internet Connection

Oct 16, 2010

I don't know where to put this, or even what I'm looking for.

I've tried for 6 hours today to get my WPA2 wireless to work as a static IP on my laptop to no avail.

Basically I put things in correctly (at least according to that thread) but I get no interent. When I restart I get the correct IP address but no internet pages will load.

The network monitor I have on my panel shows that it is trying to send and receive information, but I can not get my pages to load.

I'm desperately in need of help, but I really don't know how to even ask for it correctly.

But to start here is my interfaces file (one config of about 15 I've tried).

Code:
auto wlan0
iface wlan0 inet static
address 10.42.32.113
netmask 255.255.255.0

[Code].....

My router is a linksys WRT54GS. My wireless is set up as WPA2-Personal with the "algorithm" as TKIP+AES.

Its like it wants to connect and gives me an IP. But I just don't get any real web data.

I've restarted and tried restarting just the network.

View 5 Replies View Related

Debian Configuration :: How To Connect Wifi From CLI

Jan 7, 2014

I did a netinstall earlier today (latest version, amd64) on my Dell XPS laptop and ended up with a minimal installation because I couldn't connect to the internet. Now I'm trying to get online without a desktop environment.

I have an Intel Centrino 1030, so I downloaded and installed the firmware [URL].... with a usb, then rebooted. My searches have turned up a lot of instructions involving a utility called iwconfig and wpasuppliant, but these are apparently not installed. I don't really know much about it, but my /etc/network/interfaces file looks rather empty:

Code: Select all# The loopback interface
 auto lo
 iface lo inet loopback

Shouldn't there be something like wlan0 there? The network card does show up with lspci

View 14 Replies View Related

Ubuntu :: Lost Wireless WPA2 Connection And Ability To See USB After Update

Jan 3, 2010

I'm relatively new to Linux. My netbook ran updates yesterday for Ubuntu and now I am unable to reconnect to wireless network connection. I am using WPA2 encrypted security. I am able to connect via wired LAN. Also, when I went to connect using USB mobile connection, I get an error "unable to mount location". I get the same error if I try to connect my external CD drive. I am using Ubuntu 8.04 with Gnome desktop (2.22.3) on a Dell Mini 9.My wireless device is using Broadcom STA Wireless driver for an 802.11 wireless card.

View 1 Replies View Related

General :: Lost Wireless WPA2 Connection / Ability To See USB After Update

Jan 1, 2010

I'm relatively new to Linux.My netbook ran updates yesterday for Ubuntu and now I am unable to reconnect to wireless network connection.I am using WPA2 encrypted security.I am able to connect via wired LAN. Also, when I went to connect using USB mobile connection, I get an error "unable to mount location". I get the same error if I try to connect my external CD drive. I have tried to force mount but no luck.

View 17 Replies View Related

Ubuntu Networking :: No Wifi After Update 8/01/2010 9.10 32bit?

Jan 8, 2010

after the automatic update this morning and restart I could no longer connect to wifi. The router is visible, along with all the others, but when it tries to connect to it, it doesn't succeed.

This is what have been instaled: Commit Log for Fri Jan 8 10:58:42 2010

[Code]...

View 9 Replies View Related

Ubuntu :: WiFi Not Working On Fresh Install Of 11.04 (32bit)

Sep 1, 2011

I just got done with a fresh install of 11.04. So far I like the new update and face lift. The only thing I do not like is that I can not use my laptops WiFi I have a Compaq Presario V5101US. Below info is from doing lspci command in the terminal...

Code:
Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved