Debian :: Can't Remove / Purge / Install Package Flashplugin-nonfree
May 10, 2010
I faced on these days a very nasty problem, during the upgrading of my system... something bad happened and I can not remove, purge, install, reinstall the package flashplugin-nonfree no matter what tries I did till now. To see my tries please read bellow.Do any of you have any advanced advice how can solve this BIG problem that occurs to me?
View 10 Replies
ADVERTISEMENT
May 10, 2010
I faced on these days a very nasty problem, during the upgrading of my system... something bad happened and I can not remove, purge, install, reinstall the package flashplugin-nonfree no matter what tries I did till now.
root@intra-micro:/home/mikek# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
View 3 Replies
View Related
Sep 4, 2011
I had used "sudo apt-get install flashplugin-nonfree-extrasound" but it report Package flashplugin-nonfree-extrasound is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source
View 5 Replies
View Related
May 26, 2010
I read on a forum post that the problem with clicking certain types of flash content was resolved by downloading and install the latest package of flash from adobe's site.
I removed the flash install from the .deb package I downloaded from Adobe and wanted to start over. I am having problems installing flashplugin-nonfree and flashplugin-installer due to conflicting packages. How can I start over fresh as if flash was never installed and THEN install flashplugin-nonfree + it's dependencies without any problems?
Here's what happens when I try to remove and reinstall, among other things:
Code:
View 9 Replies
View Related
Jan 23, 2010
Yesterday, I was seeking for some Flash Player tweaks for Jaunty. In Adobe's web site I found and installed "APT for Ubuntu 9.04+." That move installed adobe-flashplugin to the system. After I removed flashplugin-nonfree and flashplugin-installer, Interestingly flash videos begin to player smoother; especially in http://www.animefreak.tv/ . Is it just a coincidence or an advantage of "APT for Ubuntu 9.04+"; because it did not exist in Adobe's website one month ago, just ".deb for Ubuntu 8.04+" was available for download.
View 4 Replies
View Related
May 3, 2010
This is the error I get when using apt-get upgrade or package manager dpkg: error processing flashplugin-nonfree (--remove): reinstall it before attempting a removal.
View 1 Replies
View Related
Jun 3, 2011
II installed flashplayer by every different method I can so far, and all of them have the same problem. This problem presents itself, for example, while playing a video on ...... As the video loads, flashplayer is fine, but as soon as it starts playing, the browser tab begins to run at roughly 1 frame per 10 seconds. When I turn the browser priority to maximum in System Monitor, it improves slightly, going to about 1 frame per second. The strange part is, my CPU and memory usage barely spike at all, to less than 30%. This happens regardless of browser (have tried iceweisel and chrome). It happens with hardware acceleration on, and off. I have tried installing flashplayer from the tar.gz on the adobe website, from the repository (all three packages), and manually placing the plugin in the browser myself. The issue presents itself the same every time.
My system specs are: 1.83GHz duel core intel centrino processor, 3GB RAM, ATI Mobility Radeon HD 2600. Nothing fancy, but flash player performs as flawlessly as flashplayer can under windows (and also performed well in my previous Ubuntu 10.04LL install).
View 4 Replies
View Related
Jun 5, 2010
Does the $ sudo apt-get install flashplugin-nonfree command always downloads the latest flash player plugin?Does it install for all currently installed browsers? Because it seems like it does.
View 4 Replies
View Related
Feb 18, 2010
I can't get flashplugin-nonfree to work; sudo apt-get install flashplugin-nonfree outputs the following:
2010-02-17 21:57:46 (527 KB/s) - `./adobe-flashplugin_10.0.45.2.orig.tar.gz' saved [4028753/4028753]
Download done.
cp: cannot stat `WeiDU': No such file or directory
cp: cannot stat `WeiGUI': No such file or directory
cp: cannot stat `WeInstall': No such file or directory
cp: cannot stat `tisunpack': No such file or directory
cp: cannot stat `tolower': No such file or directory
[Code]...
the cp's and ln's are from an install.sh from weidu-linux. apparently, i have compiled things in a terrible way. (i'm pretty sure i tried "make install.sh" and then "sudo checkinstall" and the package never went through, but now. now, i'm not so worried about the flash because any time i use apt-get this script of cp's and ln's runs (on the other hand, flash is the only package not working, so maybe this is just a cosmetic issue...). for example, ace of penguins outputs the same stuff (but at least it runs).
I don't want help with the flash issue--i just want my apt-get / dpkg to be clean again! i'll never try to run baldur's gate with weidu mod's again,
View 8 Replies
View Related
May 2, 2010
Did a fresh install of 10.04 Desktop 86_64 this weekend. One of the first issues I noticed right away was that apt was not function properly. Say for example you install the packages tor and vidalia (assume I'm running everything from root). #apt-get install tor vidalia This command will check and install necessary dependencies, for example 'privoxy'. Now if you decide that you don't want to use privoxy and instead use polipo, you would probably feel inclined to remove privoxy. Well I found that apt-get autoremove, apt-get remove, apt-get purge WILL NOT remove all the files/directories associated with the package. You'll find that after running each of these commands, there will still be directories, scripts, etc. in /etc/init, /etc, and /etc/rc*.d. The only solution I've found to completely removing a package is aptitude purge [package].
View 1 Replies
View Related
Jun 27, 2010
how does one have to build a deb-package in order to detect and react to the --purge switch?
View 1 Replies
View Related
Mar 5, 2010
I installed flashplugin-installer in my ubuntu netbook remix, i found out that it couldnt play net videos. I have tried to purge it inorder to install adobe flash player but it is not going away. this is the message i get:-
koyigo@ubuntu:~$ sudo apt-get -f purge flashplugin-installer
[sudo] password for koyigo:
Reading package lists... Done
[code].....
View 2 Replies
View Related
Jan 31, 2010
I am running Ubuntu 9.1 and am trying to download the apt file from the adobe web site and use apturl to open it. I enable the partner channel packages finish downloading and an error pops up. Could not find package 'adobe-flashplugin'.
View 4 Replies
View Related
Apr 27, 2011
I'm going by this:And the fact that I couldn't find in in my repository.It's a base install on a very minimal system with openbox. How do I get this repository and the repository that has dillo in it? I want to get flash, and will also need steps for that one I get the repositories. I realize flash is going to crawl but that's ok. I need flash to go slow for something.
View 14 Replies
View Related
Mar 5, 2011
I have logitech mx518 (mouse).Additional buttons did not work, so I googled a bit and tried different stuff. One of these is the package lomoco.I installed it via aptitude install and did not noticed any differences. So I tried to remove it with aptitude remove, but this seems not to have worked.The problem is, I get several warnings or error messages (or what ever) on startup about lomoco. So I would like to remove it completely.
View 2 Replies
View Related
Oct 17, 2010
I have tried install libsub-install-perl and libparams-util-perl but get Error. Now I want remove it from the list when I tried apt-get upgrade. Where I can remove from this entries?
View 2 Replies
View Related
Mar 19, 2011
ex: package A depends on package B, C and D I want to remove only C and D and leave A in a broken state. how?
View 4 Replies
View Related
Feb 2, 2010
Hi,
I'm using my own Debian .deb-packages for managing software updates on a small numbers of computers. So this question is about creating my own .deb Packages.
I got the Package A with the version 1.0 and 2.0. From version 2.0 on it's not necessary to keep track of the file fileB.txt. But I want to keep fileB.txt on the target system anyway.
Code:
Package A Ver. 1.0:
- fileA.txt
- fileB.txt
Package A Ver. 2.0:
- fileA.txt
If I install the new .deb package A. DPKG will remove fileB.txt.
How can I prevent dpkg to remove fileB.txt? In fact, dpkg should simply forget that fileB.txt was ever part of Package A!
Of course I could manipulate the dpkg file list, somewhere in the dpkg cache (file system). But how can I achieve the same effect within a package -> without manual manipulation on the target system?
Is there any key word in the control file? Or is there a special file, which lists "dependencies to delete"?
View 1 Replies
View Related
Oct 19, 2010
I tried to install RealPlayer using a package from the RealPlayer website but I cannot remove in now. I got the following eeror message:
Loading repository data...
Reading installed packages...
Resolving package dependencies..
View 3 Replies
View Related
Dec 1, 2010
I am using ubuntu 10.10. Recently I install a package named astah-community_6.3_all.deb. But It took very long time to complete installation. No error message display.So I canceled it. After that,I cann't install or remove any software.I show the following error.
Code:
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. So I try command 'dpkg --configure -a'. After doing so, when I install or remove any package it show the following error.
Code:
E: The package astah-community needs to be reinstalled, but I can't find an archive for it. If I tried to remove it, it show the following error
Code:
installArchives() failed: dpkg: error processing astah-community (--remove):
Package is in a very bad inconsistent state - you should
reinstall it before attempting a removal.
[code]....
View 11 Replies
View Related
Mar 4, 2011
I've been using Iceweasel for 4-5 months now, since I installed Debian 6.0 testing.It worked fine and I had to use flashplugin-nonfree from the repositories in order to get flash working, nothing new here.In my last apt-get upgrade, something broke. Not sure if it is the flashplugin or Iceweasel.I tried changing flashplugins (trying the 32bit one, trying the new 64bit, trying another package I found) but every time I go on ..... and click on a video, Iceweasel crashes.The only output I got was "sesmentation fault".So I tried with firefox and Iceape and they worked fine.However the firefox downloaded was 32bit, so I downloaded the 3.6.12 source and compiled it (Forgot to mention i'm on amd64, but who isn't nowadays?).Flashplugin works fine with firefox 64bit, browser doesn't crash, but I keep getting:
(firefox-bin:25463): Gdk-WARNING **: XID collision, trouble ahead
View 14 Replies
View Related
Sep 29, 2010
So I've installed using the minimal installation cd, and I can't get the flashplugin or java to work. When using apt-get install flashplugin-nonfree/jre.I get the error message of: no installation candidate, or it's obsolete/only available from another source.So far I have searched google and forum search, and found nothing, might be I'm just not searching to well. I've tried installing from the backports by the instructions of this link: URL...
View 11 Replies
View Related
Jun 30, 2010
Recently tried to install a new Wine package, but the install failed, so I removed it and reinstalled the old one. That installation also failed, and now the package is in a half-installed state and can neither be installed nor removed. I'd be most grateful for some help - I miss my Wine!
# apt-get install 0.9.47~winehq0~debian~4.0-1
Reading package lists... Done
Building dependency tree... Done
E: The package wine needs to be reinstalled, but I can't find an archive for it.
# apt-get remove 0.9.47~winehq0~debian~4.0-1
Reading package lists... Done
Building dependency tree... Done
E: The package wine needs to be reinstalled, but I can't find an archive for it.
What does it mean by "an archive", and where can I find one?
View 3 Replies
View Related
Aug 7, 2011
I have this package dependency question for a while. I have brand new Squeeze system. I selected desktop during installation. Gnome is default system but I turned off gdm3 and uses fluxbox as window manager. I understand if two packages are tied together funtionally so that removal of either package terminates one feature. Above cases, many small packages only depends on the core packages. The core packages work fine without games, other programs.
There are so many programs that I want to remove in the system. For examples, ekiga is a VoIP program that I never use it. When I tried to remove it using apt-get or aptitude, it suggests entire gnome packages will be removed also, which is illogical. The only solution I found is I need to manually remove the package files. I haven't tried it yet.
View 3 Replies
View Related
Jun 7, 2015
I'm having trouble with mongodb on debian. I'll start from the scratch: removing it.
Code: Select allapt-get autoremove --purge mongodb
Or:
Code: Select allapt-get purge mongodb
Or:
Code: Select allapt-get remove --purge mongodb
All end in the same way:
Code: Select all dpkg: error processing package mongodb-org-server (--configure):
subprocess installed post-installation script returned error exit status 102
Errors were encountered while processing:
mongodb-org-server
E: Sub-process /usr/bin/dpkg returned an error code (1)
[Code] ....
View 1 Replies
View Related
Jul 15, 2011
The screen goes black while "waiting to populate /dev/"and only by adding acpi=off can I boot into my system, and then I see that I get an error message during boot when "populating /dev/ " that says"fatal error during GPU init", even after I've installed the firmware-linux-nonfree.deb, which is the one for the R300 family, which I'm guessing is the right one, since lspci tells me I have:Radeon IGP 330M/340M/350MI've read the wiki[URL]
View 5 Replies
View Related
Jun 17, 2011
I want to remove a keyring package I installed from a repository that I no longer want to use. However, I cannot remove it:
# apt-get remove -y --force-yes debian-xray-keyring
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be removed:
debian-xray-keyring
0 upgraded, 0 newly installed, 1 to remove and 130 not upgraded.
After this operation, 49.2 kB disk space will be freed.
(Reading database ... 181076 files and directories currently installed.)
Removing debian-xray-keyring ...
gpg: key "AB8F901D" not found: eof
gpg: AB8F901D: delete key failed: eof
dpkg: error processing debian-xray-keyring (--remove):
subprocess installed pre-removal script returned error exit status 2
configured to not write apport reports
Errors were encountered while processing:
debian-xray-keyring
E: Sub-process /usr/bin/dpkg returned an error code (1)
View 4 Replies
View Related
Aug 13, 2011
VirtualBox is awesome tool for experiment and learning Linux.On the Linux guest OS, I installed standard system without Xorg.i expected it remove all the packages that come along with gnome-terminal previously.Only gnome-terminal was removed, 750kB free space. Now the system have 149MB packages as waste data IMHO.It doesn't look right to me.
View 4 Replies
View Related
Feb 21, 2011
So, there are these source packages i downloaded, which i want to build with slightly different configure options due to a bug in debian: hfd5-serial and hdf5-openmpi cannot coexist, yet some packages require the serial version of the lib , others require the openmpi.
I downloaded the sources, in order to build them, without the hdf5 thing...
I have already built this from source in Scientific Linux, and i know this can be done without hdf5.
Where do i hack into the debian source tree of a package to remove a configure option...?
./configure ... ... --without-hdf5 ...
View 9 Replies
View Related
Jun 2, 2011
Since the Fedoraplus site is down, I alternatively downloaded the FC14 version in hopes that it would work. Instead, I now receive the following error any time I try to remove or install a package via yum:
Code:
[Errno 22] invalid mode ('w') or filename: '//var/lib/yum/rpmdb-indexes/conflicts.tmp'
I'm pretty sure the issue here is a typo in a file (the extra "/" in the path to "conflicts.tmp").
View 4 Replies
View Related