CentOS 5 :: Managed To Get A Later Version Of PEAR Running On Centos?

Jul 6, 2010

I managed to install xdebug from pecl, using the php-pear package from Centos base.

However, when trying to install PHPUnit i get an error saying I need at least PEAR >= 1.8.x

Has anyone managed to get a later version of PEAR running on Centos please?

View 1 Replies


CentOS 5 Server :: Update 5.3 - "Warning - Your System Is Actually Running CentOS Linux Version 5.3."

Jul 31, 2009

I have Centos 5.3 on our server When I log-in in webmin I have a message "Warning - Your system is actually running CentOS Linux version 5.3." In the next line I have a button "Update Detected Operating System" My question is Do I need to click the link and update Detected operating system? If I do, is it going to change any configuration on our server?

View 2 Replies View Related

CentOS 5 :: How To Install Pear

Jan 30, 2011

I need to install pear. my php version is 5.2. i read the pear manual and it says that the pear installation should have been there unless it has been compile with ./configure without pear. i went to phpinfo and realise that i have '--without-pear' in Configure Command.

View 2 Replies View Related

CentOS 5 :: Unable To Find Php-pear-Date-Holidays For Horde Web

Nov 18, 2009

I was following these instructions[url] and it asks to have this installed yet I am unable to find the file/package.

yum install -y php-pear-Date-Holidays <-- (for now, this package is available in the EPEL repo)

I have followed the instructions on this link [url]

To install ELRepo for RHEL5, CentOS-5 or SL5:


How to get the package iinstall and/or recommended steps for horde

View 1 Replies View Related

CentOS 5 Server :: FTP PROXY Cache - Never Managed To Run

Apr 9, 2011

My past few weeks trying to cache the use frox, but never managed to run frox correctly. I need a guide for installation frox (ftp proxy or otherwise) that I can understand, because I'm still just learning. I use a superbly managed using squid for web proxy using port 3128

View 1 Replies View Related

CentOS 5 Server :: Installed CentOS 5.3 On A Machine, And Need A Samba Version 3.2 Or Higher?

Jul 8, 2009

I've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world

View 1 Replies View Related

CentOS 5 Server :: LAMP Version Available In The Official CentOS 5.5 Repositories?

Oct 29, 2010

I'm quite new to Linux/CentOS. I installed LAMP from official CentOS repositories and I'm wondering why the PHP (5.1.6) or MySQL (5.0.77) versions are so old. Why there is now the latest versions available.

Is it recommended to use these versions or should I update to the newest one - if so could you plesae provide me some links to official repositories&tutorials.

View 2 Replies View Related

CentOS 5 :: CentOS Installs A Buggy Version Of Synergy

Mar 10, 2010

As I use a (CentOS) Linux computer and a Windows XP PC side by side, I decided to install Synergy, a software to use one computer's mouse and keyboard on neighboring computers too.However, Add/Remove Software installed Synergy Plus 1.3.4-1 instead. That mostly works... Except there's a known bug on Synergy, see bug 2955158: if you use Synergy Server on CentOS to control the Windows computer, as soon as you touch the keyboard when focus is in Windows, it freezes. (I can still ssh into CentOS, but its GUI is unusable.)

Well, Synergy-Plus 1.3.4 inherited that bug. That makes it, for that purpose, useless.So I uninstalled Synergy-Plus and tried to install the lower version, Synergy 1.3.1-7, as per the recommendation in the comment on that bug report, except: I ended up with Synergy-Plus 1.3.4 again.I tried again from the command line, using yum, to no avail: yum told me Synergy 1.3.1-7 was obsolete and replaced by Synergy-Plus.I had to exclude Synergy-Plus from installation with yum, with "-x 'synergy-plus-*'", to finally get Synergy 1.3.1-7.

There, I don't have this problem. I do think that making people upgrade to Synergy-Plus 1.3.4 is a mistake.It's still not perfect. With Windows as the Synergy server (and using the Windows keyboard), if I try to type a ">" (on an AZERTY keyboard), it types "�" instead); and I seem to have an issue to copy text from Windows into CentOS.With the roles swapped, using CentOS as the Synergy server and with the CentOS keyboard, I can copy from Windows. I'm still not sure what is the cause of this.

View 2 Replies View Related

CentOS 5 :: Way To 'lock' To Minor Release Version Of Centos?

Aug 18, 2010

I've had two centos smtp relays setup since 5.1, and it seems every day there are updates, and about every 3 months new minor releases.Is there a way to "lock" to a minor release version of centos? I use yum update to run updates, is that the correct process?

View 2 Replies View Related

CentOS 5 Hardware :: Z-Star Microelectronics Corp. USB 1.1 Webcam - Get Running With CentOS 5.4 X86_64?

Oct 30, 2009

I've got two USB webcams I'm trying to get running with CentOS 5.4 x86_64. I've downloaded and installed the gspca driver from http://mxhaard.free.fr/spca5xx.html. Running lsusb yields:

Bus 002 Device 003: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
Bus 002 Device 002: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam

View 9 Replies View Related

CentOS 5 :: Best Suitable Version Of XFS To Work With CENTOS 5.3?

Nov 29, 2009

By the way, is there a step by step guide to install XFS file system and other related components on CENTOS 5.3,

View 2 Replies View Related

CentOS 5 :: Install CentOS 5.2, And The Installation Ran Out Of Disk Space After Running For About 2 Hours?

Feb 18, 2010

I am trying to install CentOS 5.2, and the installation ran out of disk space after running for about 2 hours.I checked the FAQ, and it said 1.2 GB. The disk is 3 GB. The default install was selected, and I think that it checks for sufficient available disk space before installing. Still, it ran for quite a while before announcing that it was out of disk space.The Installation Guide is not very helpful, since there is a blank page where the disk space requirement is supposed to be. I just picked the default installation. A search of the forums on "not enough disk space" did not return much.

View 13 Replies View Related

CentOS 5 :: Install Centos On Hard2 While Running It On Hard1 From CLI?

Feb 28, 2010

i wanna ask if it's possible to install centos on hard2 while am running centos on hard1 then after installation is complete boot from the second hard drive. i dont have physical access to the server, all i can is connect to it through SSH. so is it possible to install centos on the second hard drive from CLI! then boot from it?

View 1 Replies View Related

CentOS 5 Networking :: Latitude E5400 Running VM Centos OS?

May 18, 2010

I have a Dell E5400 laptop running parallels with guest OS of CentOS 5.4. My problem is when I'm connected via Ethernet all connections are good. When I go wireless, CentOS is dead via network connections. Now according to Dell, I have a DELL 1397 mini card as my wireless card. Searches on the web state that the dell 1397 is another name for Broadcom 43xx wireless card. So after following any information I retrieved from the forum on trying to get the wireless connection up, I'm still having problems. Here is the latest error trying to build a driver using the hybrid_wl software from broadcom:

make -C /lib/modules/`uname -r`/build M=`pwd`
make: Entering directory `/usr/src/kernels/2.6.18-164.15.1.el5-i686'
CC [M] /usr/local/src/hybrid_wl/src/shared/linux_osl.o
CC [M] /usr/local/src/hybrid_wl/src/wl/sys/wl_linux.o
CC [M] /usr/local/src/hybrid_wl/src/wl/sys/wl_iw.o


View 7 Replies View Related

CentOS 5 :: Running A CentOS 5.5 System Which Does NOT Support VT Technology

Jun 3, 2010

I am running a CentOS 5.5 system which does NOT support VT Technology, so I am unable to use Xen HV. I am very happy with OpenVZ other than the fact that it doesn't support Windows, only Linux.I'd like to have VMWare Server 2.x installed, but it appears that OpenVZ changes the Kernel to, in my case, 2.6.18-194.3.1.el5.028stab069.6. The default kernel on my system is 2.6.18-194.3.1.el5.i386.If I change grub to load 2.6.18-194.3.1.el5.i386, VMWare will work but OpenVZ will not. If I change grub to load 2.6.18-194.3.1.el5.028stab069.6, OpenVZ will work, but VMWare will not.If I try to run /usr/bin/vmware-config.pl while in the 2.6.18-194.3.1.el5.028stab069.6 kernel, I get an error of:

None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)?Using compiler "/usr/bin/gcc". Use environment variable CC to override.

What is the location of the directory of C header files that match your running kernel?[/usr/ src/ linux/ include]I'm so lost as what to do now..is there anyway I can compile both of the kernels together somehow?

View 2 Replies View Related

CentOS 5 :: Running Centos From USB As Hard Disk?

Sep 1, 2010

I have seen that is possible to boot from a USB stick and use a USB memory as hard drive.I have a server enable to hold 6 sata drives 3.5", But I want to use the 6 drives and make a Raid-5 setup for backups 5 -1 spare. /boot cannot be on a raid-5 level 0 or 1. But I want to have redundancy for my OS, them I can install Centos on a Raid-1 using 2 disk, which let me only 4 for the raid 5. I will run a backup I want to have a lot of space.

Using 4 disk for raid-5 2 TB I will have 6TB no spare, no spare is not a good option at least I will prefer 1 spare.Well, I was thinking, the server MoBo have USB support, if I open the box I can see the small entrances, If Centos let me installed on a USB memory drive, can I trust a USB memory stick?t night with bacula.

View 2 Replies View Related

Ubuntu :: Php Pear Seems Broken / Fatal Error: Call To Undefined Method Pear?

May 2, 2011

I'm trying to install a package (validate) from pear.

but the command sudo pear install validate fails with error:

PHP Fatal error:Call to undefined method PEAR::raiseErro() in /usr/share/php/PEAR/REST.php on line 165

Looking around on the internet I found a bug report on debian:url

The fix is to update php5.

So now the question:

How do I update php5 or apply the patch mentioned in this bug report?

View 4 Replies View Related

Fedora Servers :: Pear Installation/configuration / Setting Displayed There For Pear?

Sep 29, 2009

I have pear installed, but I'n not sure I have it configured properly.

When I do a phpinfo(), no where are the settings for pear (meaning where it's located). If I recalled there is supposed to be a setting displayed there for PEAR.

View 4 Replies View Related

General :: PHP Fatal Error - Call To Undefined Method PEAR - RaiseErro() In /usr/share/php/PEAR/REST.php On Line 165

Apr 30, 2011

When running

Pear upgrade

The following error is raised:

View 1 Replies View Related

Fedora Installation :: Yum Install Php-pear - No Package Php-pear Available?

Nov 30, 2009

I am trying to setup APC on my Fedora 7 server but cant install php-pear. There are loads of sites explaining how to do this but they all use "yum install php-pear" which yum cant seem to find??

root@fedora7 [/etc/apt]# yum install php-pear
Loading "fastestmirror" plugin
Repository base is listed more than once in the configuration
Loading mirror speeds from cached hostfile
* base: p3mirror01.prod.phx3.secureserver.net

View 3 Replies View Related

CentOS 5 :: Postfix Version Comes With CentOSPlus Repository (Version 5.4)?

Jul 4, 2010

what is the postfix version comes with CentOSPlus repository for centos 5.4

View 2 Replies View Related

Ubuntu :: 10.04 - Could Not Managed To Install 64bit Version?

May 15, 2010

Anyone managed to install Ubuntu 10.04 on a box with Intel Core i7 920@2.67Ghz processor. I downloaded ubuntu-10.04-desktop-amd64.iso & ubuntu-10.04-alternate-amd64.iso ran md5sum's, burnt them to DVDs & CDs but couldn't manage to install the 64-bit version. For some reason the installations abort. I've got Ubuntu 9.10 32-bit version running on the box right now.

View 3 Replies View Related

Red Hat :: Running Centos But Don't See A Centos Forum?

Jan 1, 2011

I'm actually running Centos but I don't see a Centos forum yum stanza/url for the source repository please?

View 3 Replies View Related

CentOS 5 :: GUI Interface On A VM Running CentOS 5.4?

Nov 16, 2009

root@vz03i106 [~]# yum groupinstall "X Window System" "GNOME Desktop Environment"

Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: centosk2.centos.org


View 3 Replies View Related

CentOS 5 :: Upgrade Existing MySQL 5.0.77 Version On CentOS 5 Red Hat To MySQL 5.1.x

Aug 31, 2010

I want to upgrade existing MySQL 5.0.77 version on CentOS 5 Red Hat Linux to MySQL 5.1.x. Is anybody have list of patches or upgrades to upgrade to MySQL 5.1.x?

View 6 Replies View Related

Fedora Networking :: Eth0 No Longer Managed In NM - Device Not Managed ?

Nov 3, 2010

I use my T61 both wireless and in the dock, where I switch to the wired connection. After the latest round of updates, I seem to have lost the ability to switch to the wired network. When I turn the laptop on, I see it connect to the wireless network, but when I left click on the tray icon under Wired Network is says Device not managed. I have not made any changes to anything in the last couple weeks, besides some updates. How do I go about getting the wired network back in there?I tried to add eth0 back into System - Preferences - Network Connections, but whenever I try and add eth0, but it still says Device not managed.

View 2 Replies View Related

General :: What Version Of CentOS Is In Use

Jul 22, 2010

I am new to being a sys-admin and Linux and UNIX. And I was wondering how can I tell what version of centos I have?

View 4 Replies View Related

CentOS 5 :: Any Way To Get PDF Printer For 5.2 Version

Mar 7, 2009

I'm looking for a PDF Printer for centos 5.2. I found something on a way to use CUPS for a PDF Printer for linux, but so far only ones I see out there are the (my version centos 5.2, i386) 4.3 i386. Dose any one know a different way to get a PDF Printer for centos. My uses for it is just to turn a website page into a PDF format for offline viewing.

View 7 Replies View Related

CentOS 5 :: Get A Rpm For A X86_64 Box With A Xen Version >= 3.2?

Mar 13, 2009

I need to upgrade from xen-3.0.3-64.el5_2.9 which includes xen 3.1 to something that includes >= xen 3.2

1. what happened to xen-3.0.3-64.el5_2.9 and

2. where I can get an rpm for a x86_64 box with a xen version >= 3.2?

View 1 Replies View Related

CentOS 5 :: How To Keep Yum From Updating OS Version

Aug 3, 2009

My server's manufaturer (supermicro) only provides RAID drivers for certain RHEL (CentOS) releases, 4.4, 5.2 and 5.9 are presently available. An accidental yum update recently took the server from CentOS 4.4 to 4.7, and abandoned the RAID driver. My choces are to reload 4.4 or go to 5.2. Since I will probably do the latter, is there a way to have yum just update within the distro, and not the distro version? Can someone ID the rpms I could exclude to be sure that the OS version remains static?

View 3 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved