I have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
On an Ubuntu 9.10 (Karmic Koala) machine, I burned a CD from the command prompt using: cdrecord -v speed=16 dev=0,1,0 /FPS.iso.The CD now contains an executable and some files. I tested the CD by loading it onto another machine (Red Hat 5.3) and when I try to run the program I get the following message:bash: ./FPS1_1: Permission denied.I can open other files like text documents (the executable also comes with shared libraries).I realized I had burned the CD as root so I burned another one as another user but I still have the same problem.
I have 3rd party software that I need to install. It is called VNMRJ. It is packed as one .tar. I extracted the .tar to the desktop (under root) and want to start the installation. However, during the installation process, all .tar files included the the package (sub directories) can't be extracted by the installation routine. For every .tar I get the error
tar: /root/Desktop/vnmrj21b_inova_01106/code/common/com.tar: Cannot open: Permission denied Installation of VNMR failed tar: Error is not recoverable: exiting now DONE: 112 KB
I'm trying to install Ubuntu 9.10 on my Windows Vista Home Premium machine. My specs far exceed the requirements to install, so I know there's no problem there.On installation I receive an error somewhat through that says something like:Quote:An error occured:Permission deniedFor more information, please see the log file:C:UsersUsernameAppDataLocalTempwubi-9.10ubuntu1-rev160.logSo.... I go to that file, and the last line in it is:Quote:OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-9.10-desktop-amd64.iso'I did run Wubi Installer as an Administrator, and unblocked it giving it full privileges.It's really annoying because my download speed is 80kb/s so it takes about 3 hours to download. During that 3 hours I can't use my internet so I have to wait, and wait, and wait, and then boom.error. And wubi can't pick up where it left off, you have to uninstall to reinstall, which sucks tremendously.
I installed MATLAB R2009a in my laptop (Fedora 14 x86-64), the installation was succesful but when I run MATLAB (in a console), appears a message: error while loading shared libraries: libut.so: cannot enable executable stack as shared object requires: Permission denied
I find a "solution", execute in a terminal: execstack -c libut.so
I used several times with differents libraries that I needed, but I run MATLAB in a terminal, MATLAB starts in a terminal, only a prompt ">>" and nothing.
I'm trying to install Ubuntu on Windows XP as a dual boot using Wubi, but whenever I try to install it I get an error message that says: An error occurred: Permission denied For more information, please see the log file: c:docume-1lanzarolocals-1 empwubi-10.04.1-rev190.log Does anyone know what this means and if I can fix it?
I just downloaded OpenOffice 3.2.1 from the openoffice.org weebsite. I followed the instructions precisely and everytime ended up in the same error message - 'error: can't create transaction lock on /var/lib/rpm/.rpm.lock (Permission denied)'. I am using Fedora 13.
I am running Ubuntu 10.04 as a dual boot on my laptop next to Win 7. I installed using all defaults, as I am pretty much a novice user. I also put 10.04 on my desktop at home, but did not install. I am running that machine ON the Win 7 partition. My problem is that on my desktop, I get a boot option of Windows or Ubuntu from the MBR, and Windows is the default. If I choose Ubuntu, I then get the Grub menu which defaults to Ubuntu (fine, I already chose that).
On my laptop (where I did the full install on its own partition) Grub takes over, which would be fine but for Ubuntu being the default. I really want the default to be Win 7. I have read several posts, and a tutorial on changing the boot order in Grub, but when I try to access the file mentioned (etc/default/grub) I get an error "Permission Denied". I have made myself Administrator, so I should have access to everything. I know I need to change the line GRUB_DEFAULT=0 to GRUB_DEFAULT=6 to make this work, but I cannot open the file. Is there an easier way of doing this? Honestly, if you want novice users to try out Ubuntu, sending them to command line is NOT the way. The great majority of people that might be willing to try Ubuntu will run for the hills at the simple suggestion of command line. Most everything else you do is handled by an app, why not this?
I'm trying to run a backup using CPIO to an LTO2 tape in an HP Ultrium 460 drive using the following:find / -path /proc -prune -o -print | cpio -o -H crc --block-size=128 > /dev/st0Each time I get the error:-bash: /dev/st0: Permission deniedThis is regardless of whether I sudo the two sides of the command or not. I have used dd if=/dev/st0 of=/tmp/test.file ibs=128k count=1 to verify the blocksize (and since I was a little confused about block-size in cpio I also tried --block-size=256)
I have a shared directory on another machine but I can't get it to mount. The permission denied doesn't say where/which permission is denied. Is it on the remote on on the local machine? The remote has sharing enabled for the shareddocs directory and after I have mkdir'ed the local mount point I open it's permissions too.
The verbose response from mount.cfis looks like this:
mount.cifs kernel mount options: unc=//192.168.1.102shareddocs,domain=WORKGROUP,ver=1,rw ,username=clive,,,,,,,,,,,ip=192.168.1.102,pass=** ****** mount error(13): Permission denied Refer to the mount.cifs( manual page (e.g. man mount.cifs) The man page does not have a list of error codes.
I'm trying to setup a network boot server and I'm having an issue with tftp. In the /etc/xinetd.d/tftp file, I added the "-v" (verbose) option to the server arg line so that i could figure out what was happening. When i looked at the /var/log/messages log file, it let me know that permission was denied to /tftpboot/nbi_img.
So, in short, my problem is that tftp isn't working because it doesn't have permission to /tftpboot/nbi_img. I can't figure out why. I stumbled upon a site where the user figured out a temporary fix to this issue and what he did was disabled the xinetd service and typed the following command:/usr/sbin/in.tftpd -l -v -v -s /tftpboot/nbi_imgWhen I do this as well, it works! but only until I restart and then I have to do that again. Is there a way to be able to fix that for good?
i have a big question about nfsv4, 2 mahine , 1 client 1 serverclient mount -t nfs4 nfs:/ /mnt/nfscd /mnt/nfs/1touch: cannot touch `123': Permission deniedmount -lnfs:/ on /mnt/nfs type nfs4rw,addr=192.168.1.5)this is my configclient & servervi /etc/hosts192.168.1.5 nfs nfs.test.com192.168.1.6 node1 node1.test.com
When trying to mount samba share off of domain member server sysimage in Windows receive error "There are currently no logon servers available to service this logon request". When trying to mount.cifs from PDC to samba share on sysimage receive error "mount error(13): Permission denied".
PDC is ClearOS 5.2 named "dc0" Samba file server is CentOS 5.5 x86_64 named "sysimage" dc0 Samba version is samba - 3.5.5-1.1.v5.i386 sysimage Samba version is samba-3.0.33-3.29.el5_5.1.x86_64
dc0 is configured correctly to my knowledge, windows machines can join domain, domain users can log into windows machines, user directories are mapped properly, logon scripts run properly. sysimage ldap authentication is set up as shown in "Procedure 7.1.
I have my DNS configure in 2 zones. 1 internal, and the other external. DNS is chrooted under /var/named/chroot amd has been operating without any problems for well over 2 years now. I have recently run cross the problem shown in the subject line. When I try to freeze the internal dehnert.com zone with the following command...rndc freeze dehnert.com IN internal
I get the error...
I have been running the command as root, and with iptables turned off, so there is no firewall to restricting access. (the system sits behind a firewall) I have been searching the forums all over, but I havent run across what might be causing me to have root denied access. If anyone has seen any problem like this, please point me in the right direction so I can iron this out.
I had Fedora 8 installed in few clients and a server (same server for NFS and NIS), and NIS and NFS configured, and was working fine. Yesterday, I upgraded few client computers to Fedora 15 (server is still same), and configured NFS and NIS client. NFS is working fine, I can see home directories.
For NIS: ypwhich, ypcat passwd gives me correct uutput, ypbind is running. The problem is, I can't login to NIS client. The error is: Permission denied, please try again. My nssswitch.conf is
I'm having a permissions problem with Ubuntu and apache. There are two users, I'll just call them A and B. All of the files belong to A and group root. I'm logged in as B and I have admin privileges. My website is working just fine but when I create a directory in the web root, change the owner to A on the directory and all files I still get a Permission Denied error when I try to access it from the web. I've also set permissions to rxwr-xr-x on the directory and all the files. So I don't understand what's going on. Why am I still getting a permission denied error?
I want to use SSH to connect to my desktop. I have used Ubuntu 10.10's encryption to encrypt my home folder (thus encrypting my .ssh folder). This means that the OpenSSH doesn't have access to my .ssh folder. When I try to log into SSH before logging in on the local machine I get the following error:
If I log onto the machine, then use SSH it works fine. I want to use key based login, One way to get around this error would be use a different authorized_keys file, but I don't know of a way to do this. This is the contents of my sshd_config file:
# Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for
I am using Ubuntu server edition 10.04.1 running in Vmware server 2.02.I am connect via Putty so I can use copy and paste.My first goal is configuring a ftp server using PureFtpd using this guide.In section 10 I need to write this command
I'm trying to create a folder using the archive manager to install Resin (web server) in the usr/local folder but I get the error message 'error creating directory: Permission denied.' Is this the easiest way to install an app--by using the Archive Manager--and if so how do I establish the correct permissions.