CentOS 5 Server :: Cannot Join Windows 7 To Samba PDC

Sep 2, 2010

Good evening, I get the following error when prompted for my user name and password credentials that have access to the domain rights on the server. After typing in root and the password I get the following.

"The specified computer account could not be found. Contact an administrator to verify the account is in the domain. If the account has been deleted, unjoin, reboot and rejoin the domain."

Posted below is my smb.conf file, however I feel like I am screwing up the last steps with group-mapping, net commands, and creating accounts.

[global]
workgroup = SCRUGGSHOME
passdb backend = tdbsam
printcap name = cups
add user script = /usr/sbin/useradd -m %u

[Code].....

View 15 Replies


ADVERTISEMENT

CentOS 5 Server :: Samba PDC+LDAP, Failed To Join Domain For Win2k8?

Dec 8, 2009

I've setup my samba pdc with ldap, and I can see my shared files (public), which i think is an indication that my samba is working. But I can't seems to get my win2k8 machine to join my domain.

My domain admin is : root system admin: root password for both domain admin and system admin are the same The message that I get from Win2k8 when I try to join a domain is "The specified computer account could not be found. Contact an administrator to verify the account is in the domain. If the account has been deleted unjoin, reboot, and rejoin the domain"

[Code]...

View 2 Replies View Related

CentOS 5 Server :: Join Windows Server 2003 To CentOS 5 Cluster?

Jul 26, 2010

is it possible to join Windows Server 2003 to CentOS 5 Cluster?

View 1 Replies View Related

Networking :: Join Ad With Samba, Preperation On The Windows Machine?

Jul 6, 2011

but is there any thing i need to make sure on the domain controller for me to be able to join the domain with a linux machine alright?

View 2 Replies View Related

General :: New Windows Xp Clients Can't Join Samba Domain / Fix It?

Aug 18, 2010

We've been running samba on linux for a while and everything was fine. All of a sudden when you add new clients to the domain you get the error message :Logon Failure:unknown user name or bad password. This to me seems like a windows error message and not a samba error. When you remove an existing machine (ie on domain) and then try to rejoin it to the domain you fail.

View 4 Replies View Related

Ubuntu Servers :: Samba, PDC: Windows Xp Unable To Join The Domain?

Dec 18, 2010

I've been configuring a PDC using samba I used this tutorial url as reference. It seems all went well during the installation and configuration not until when I try to join a windows machine to the domain.

Scenario: When the authentication dialog box prompts the username and password of the domain administrator. I supply root as username and its corresponding password. Then I will prompt an error "The user name could not be found. But, I have noticed that when I supply a wrong password of root the it will prompt "Login failure: unknown user name or bad password. It seems that the windows machine was able to recognize the account somehow.

View 8 Replies View Related

Server :: Samba: Simple Error With NET RPC JOIN

Jan 29, 2010

I try to setup a client (for password /etc/passwd) to my samba server, without using the kerberos. let's make it simple: just samba. here are the errors: I have installed winbind, portmap, and samba/smbclient packages on the workstation linux ubuntu , which is intended to be client to samba for /etc/password attached to the server. At boot nothing changed, and the /etc/password is not attached to samba. So my passwords are stil the local of hte client, and not the server. This is my config of the client workstation:

[code]...

View 2 Replies View Related

Server :: Unable To Join Machine To Samba PDC

Jan 4, 2011

I am facing a problem which joining my linux machine to SAMBA Primary Domain Controller (Running on Centos 5). I am able to join Windows XP machine to the domain, but i have no idea how to do it on Linux Client.

View 1 Replies View Related

Debian :: Cannot Join Server To AD With Samba After Upgrade To Squeeze

Sep 15, 2010

A very strange thing happened to me today after upgrading a Lenny server to Squeeze. All seems to be working great except for the fact that I cannot join the server to our domain (made a work copy of the virtual machine holding Debian, upgraded that, renamed and changed IP).

The problem I'm having is related to Samba as far as I can tell. On the Lenny server(s) I have the 'net' command to join a server to a domain but not on the upgraded version (Squeeze). It just says command not found and there's indeed no 'net' in /usr/bin where it's supposed to be.

I imagine that something went wrong upgrading Samba although the rest works, the daemons are running, kerberos works (kinit, klist), and so on, I only miss the net command.

Is there a way to install that separately or which package do I have to reinstall (samba-common, sambafs, ...)?

I have other servers (clean install and upgrade from Lenny to Squeeze) that do have the command in /usr/bin. Can I just copy it over from one to another or do I have to remove and reinstall Samba all together?

View 1 Replies View Related

Server :: CentOS /Samba Server- XP Windows Client File Sharing?

Nov 3, 2009

I have a CentOS + Samba server and Windows XP client machines. Users, passwords and permissions are entered on the server machine.users and passwords ( same as on the server ) are entered in the XP client machine.When attempting to access a public file on the server using a XP client machine and the IP address of my server, I am asked a user name and password and none of the already entered seem to work. I cannot access the server file (prompted again and again to enter user name and password). What did i miss

View 7 Replies View Related

CentOS 5 Server :: Windows 2008 AD And Samba - Repositories

Apr 13, 2009

if there are any repositories with the newest samba version? I'm having a hard time installing it with my W2k8 Server.

View 1 Replies View Related

Server :: Samba - Setting Up Shares For Windows Machine On CentOS?

May 10, 2010

Can anyone point me in the direction of setting up shares for windows machines on centos. I have found a few document but never managed to get it up and running correctly. I need to be able to get access to subfolder etc for different users. Is there any way of doing it with some sort of gui?

View 2 Replies View Related

CentOS 5 :: Windows Users Cannot Change Password On PDC Samba Server?

Sep 3, 2009

I'm using on my smb.conf

# Sincronizacion de cuentas LDAP, NT y LM
# unix password sync = Yes
ldap passwd sync = Yes

[code]....

View 2 Replies View Related

CentOS 5 Server :: SSO Authentication Windows 2008 + Samba 3.0 As Member

Oct 21, 2010

I have Windows 2008R2 Server acting as Domain Controller for Windows7/XP clients. and CentOS 5.3 Installed configured as Samba Server, I want to make it as ADS member server so any user to login to any machine, and be able to access their Samba share.

View 3 Replies View Related

Server :: Samba Setup - Windows 7 Host, CentOS Machine Using VirtualBox

Jun 23, 2010

I am trying to set up samba in my CentOS virtual machine that is running on a Windows 7 host. I have found a tutorial in the How-Tos on this site but I'm not sure if they are exact and I'm paranoid about messing something up. The link to the tutorial is below. Is there anything that I should do different or anything that I should be aware of? Also, once this is set up, how do I transfer files between the two machines?

[URL]

View 1 Replies View Related

Server :: Unable To Access Samba Share On CentOS 5.4 From Windows XP Or Vista

Jan 23, 2010

I can't be the first one with this problem. What am I missing?

I have setup Samba servers in the past, just none under SELinux. The last one I configured was a couple years ago, so I wouldn't doubt I'm a bit rusty.


---- Environment summary:
Clean server install of CentOS 5.4 includes SELinux
- lets call this 'server'
- updated samba to 3.0.33-3.15.el5_4.1

Client1 - Windows XP sp4 - WINS configuration uses 'server' noted above
Client2 - Windows Vista - WINS configuration uses 'server' noted above

---- What works / what doesn't ------
Clients can see the server (XP and vista) in network neighborhood.
The following does not work from windows (xp or vista)
net view
net view \server
net view \server-ip
net view \servershare

This does work on the server
smbclient -L \server
smbclient -L \server --user validuser
smbclient -L \client1 --user validuser


---- What I have configured and tried (config/output below) --------
firewall ports for samba are open
SELinux enforcing or permissive
file context is set on share
samba booleans are set

***firewall
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p tcp --dport 445 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 137 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 138 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p udp --dport 139 -j ACCEPT

***SELinux mode/booleans
# sestatus
SELinux status: enabled
SELinuxfs mount: /selinux
Current mode: permissive
Mode from config file: enforcing
Policy version: 21
Policy from config file: targeted

# getsebool -a | grep smb
allow_smbd_anon_write --> off
smbd_disable_trans --> on

# getsebool -a | grep samba
samba_domain_controller --> on
samba_enable_home_dirs --> on
samba_export_all_ro --> off
samba_export_all_rw --> off
samba_share_fusefs --> off
samba_share_nfs --> off
use_samba_home_dirs --> on
virt_use_samba --> off

***filesystem
# semanage fcontext -a -t samba_share_t �/share/photos(/.*)?�
# restorecon -R -v /share/photos

***Disks
]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 9920624 2070872 7337684 23% /
/dev/sda1 101086 19146 76721 20% /boot
tmpfs 1846656 0 1846656 0% /dev/shm
/dev/mapper/VolGroup00-xen
100791728 202540 95469188 1% /xen
/dev/mapper/VolGroup00-photo00
251981556 191716 238989840 1% /share/photos
/dev/mapper/VolGroup00-dmsdoc00
100791728 192256 95479472 1% /share/alfresco
none 1846656 104 1846552 1% /var/lib/xenstored



***smb.conf
[global]
workgroup = workgroup
netbios name = server
security = user
name resolve order = wins hosts lmhosts bcast
encrypt passwords = yes
hosts allow = 192.168.0.
hosts deny = 192.168.122.
interfaces = eth0
passdb backend = tdbsam
oslevel = 222
local master = yes
domain master = yes
preferred master = yes
cups options = raw
username map = /etc/samba/smbusers
wins support = yes
log level = 4
guest ok = yes

[photo]
comment = Photos
path = /share/photos
read only = yes
guest ok = yes

View 5 Replies View Related

CentOS 5 Server :: Openvpn Connect To Samba Share From Windows XP Client?

Sep 15, 2009

I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!

I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?

View 1 Replies View Related

CentOS 5 Server :: Cannot Join More The Win AD Domain?

Sep 28, 2009

I have a centos 5 server joined to a win2003 active directory domain. It's a virtual machine, so i had to sync the date (ntpdate) because it was 12 minutes different. It worked, but not ntlm authentication is not working anymore. If i rejoin the domain i get:

net ads join -U administrator@MYDOMAIN.COM
administrator@MYDOMAIN.COM's password:
Failed to set password for machine account (NT_STATUS_DISK_FULL)
Failed to join domain: NT_STATUS_DISK_FULL

View 5 Replies View Related

OpenSUSE Network :: Can't Join Windows Server 2008 Domain?

Jul 5, 2010

I have too many problems to join my OpenSuSE 11.2 with Samba 3.5.4 in a Windows 2008 Active directory Forest (MYDOMAIN.LOCAL). I have updated Samba to 3.5.4 after read that default 11.2 version have too many bugs. Now, when I try to join the Domain MYDOMAIN.LOCAL via yast i have only an undebuggable error "unknown error". For yast, my Suse is joined but i'm unable to authenticate, i can't see "MYDOMAIN.LOCAL" at KDM login and if i try to lookup forest i have this error:

Code:
wbinfo -u
Error looking up domain users
but i'm able to retrive ticket via kinit
Code:
# kinit Administrator
Password for Administrator@MYDOMAIN.LOCAL:

[Code]...

have you a samba version tested against Active Directory 2008? can you link me the repository or help me to solve this?

View 2 Replies View Related

Ubuntu :: Networking / Setup A Domain And Directory Server Similar In Function To Windows Server W/ AD And Join Other Machines To The Domain

Aug 21, 2009

I've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.

View 3 Replies View Related

CentOS 5 Server :: Super Slow Windows Printer Properties Dialogue With Samba Printer

Sep 18, 2009

I have a Centos 5.3 server with Samba file shares and a shared Samba printer. I am not running a domain.

I recently changed my windows desktop pc from an XP machine to a vista 64 machine... It has a different user name. Everything went pretty smoothly - and the and the vista machine found the smba printer - and even downloaded the driver from the samba server. he printer works OK - and the file shares are fine.

The only thing which is quite odd - is that the Printer Properties dialogue takes more than 30 seconds to come up - and every action you attempt with the dialogue takes a similar amount of time.

I will include below the essence of my smb.conf:

View 3 Replies View Related

CentOS 5 Server :: Samba-3.0.33 - Cannot Change Computer Names In A Samba Domain?

Oct 8, 2009

I have to rename a group of machines in my little samba domain (tbd backend) but there is an ugly bug that makes this impossible. have set 'rename user script' variable corectly, also checked all configurations.When i change computer name in my windows box, it shows an error saying something like "Error calling remote procedure"Looking on server side, username for the machine gets correctly changed in /usr/passwd, and also in samba database.But samba log says:

===============================================================
[2009/10/08 11:10:32, 0] lib/fault.c:fault_report(42)
INTERNAL ERROR: Signal 11 in pid 11052 (3.0.33-3.7.el5_3.1)

[code]....

View 3 Replies View Related

Fedora :: Samba As BDC On F11 And WinXP SP3 Not Join In Domain

Sep 28, 2009

I have installed Fedora 11 and all updates. Samba 3.4.1. When join to domain from WinXP box with sp3 show error. The specified network password is not correct.

View 9 Replies View Related

Ubuntu Servers :: Samba PDC - XP Client Can't Join Domain?

Mar 31, 2011

I am practising setting up a small network using UBUNTU as a PDC through SAMBA to service xp clients.

I have sucessfully setup DNS on the Ubuntu server using Bind9 and can nslookup from both the client and the server by FQDN and can also ping ipaddress.

I have setup a basic smb.conf file however when I try to add the xp client to the domain I get an error message saying a domain controller for the domain could not be contacted.

I have disabled the firewalls on both the server and the xp client and still get the same error message when trying to join the domain. I've checked my network settings on the client, its set to use a static IP address and the DNS server and WINS server are set as my Ubuntu Samba PDC address.

I haven't been able to see anything odd in the smb.conf file that might cause this issue. I can connect directly to the shares using the samba network account that I created by going to start run and typing in the unc path.

Not sure what the cause of this issue is, I thought it might be a DNS issue on the client. One odd thing I noticed is that when I do nslookup using just the server name and not the FQDN i get a message in dos saying that the default server cannot be found but says that the server name for the [ipadress] cannot be found. It does list the correct ip.

I'm not sure what is causing the problem of stopping my xp client from joining the Ubuntu Samba PDC. I'm using UBUNTU server 10.04.

View 1 Replies View Related

CentOS 5 :: Windows XP And Windows 7 Cannot Access SAMBA Shares?

Jan 27, 2011

I have setup CentOS 5.5 with SAMBA 3, configured all my Unix users, Samba users and shares. My server hostname is REL3

[root@REL3 ~]# smbclient -L REL3
Password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1]

[code]....

View 16 Replies View Related

Software :: Configuring Samba Users To Join Clients To The Domain?

Feb 3, 2011

Im currently using an english book to setup my samba server, and im having problems understanding it.

I dont want to use root to join clients to the domain; i prefer creating a plain user.

Ok, so, the steps i follow are:

net groupmap add unixgroup=srvadmins ntgroup="Server Admins"
net groupmap add ntgroup="Domain Admins" unixgroup=dmnadmins rid=512 type=d
net rpc rights grant 'ORAServer Admins' seMachineAccountPrivilege

This way, i have a group called srvadmins with permissions to join clients, a group called dmnadmins with permissions to manage users and other permissions, and root.

Now, users: "root", "dmnadmin"(from dmnadmins group) and "srvadmin" (from srvadmins group) can add machines to domain. Root because is root, srvadmin because i granted permissions, and dmnadmin because is admin

So i wonder, why srvadmins group is needed to be granted privileges?

I tryed to lower dmnadmins privileges by revoking semachineaccountprivilege privilege, but didnt worked

net rpc rights revoke 'ORADomain Admins' seMachineAccountPrivilege

looks like its privileges comes from another group and it user managed to add a machine to the domain correctly.

Ok, so, is this really usefull? why do i need 3 kind of users to be able to join to the domain?

View 3 Replies View Related

CentOS 5 Server :: Installed CentOS 5.3 On A Machine, And Need A Samba Version 3.2 Or Higher?

Jul 8, 2009

I've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world

View 1 Replies View Related

CentOS 5 :: Get Windows 7 Joined To A Samba Domain?

Oct 17, 2009

For who ever tries to get Windows 7 joined to a Samba domain, here's a small howto i wrote:[URL]...

View 3 Replies View Related

CentOS 5 :: Map Drive To Samba Share From Windows?

Apr 18, 2011

Below is my samba config. Is there anything that appears obviously wrong?

Why can't I map a drive?

from a windows 7 x64 workstation:

The network path was not found.

View 9 Replies View Related

CentOS 5 Networking :: Windows Permissions On Samba Share?

Apr 30, 2009

I have set up a Samba share via my CentOS 5 server (the samba share is actually a mounted filesystem, not local machine space). I have been successful in adding permissions for my windows users within the smb.conf, but have an additional need that I cannot figure out. I would like for my Windows administrators to be able to create folders and assign permissions from their machines (and their Windows GUI). Ultimately I need the folders on the Samba share to behave correctly when Windows group permissions are applied by these administrators.

When the folders are created, the "Everyone" identity cannot be deleted and sometimes "Creator Owner" or "Creater Group" show up. I have seen several threads start down this path, but haven't seen a definite answer (I may have just missed it!).

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved