CentOS 5 Networking :: Daemons Is Not Responding

Jun 4, 2009

The server is a Dell 1650 1U server, which a fresh install of CentOS 5.3, formatting the drive in the process. It has two e1000 NIC's and based on the wiring eth0 is the public segment and eth1 is the private segment.Both nic's make a solid 100mb connection to the cisco switch, and I can ping both interfaces "just fine".

If I run nmap on a remote PC that is also dual-homed in this fashion, I get the same response as to which ports are open (essentially everything since I disabled iptables temporarily to troubleshoot this issue) on both interfaces, which would be the expected result.But... and here is the source of my confusion... I can see the server by pinging it, I can use SSH to make such a connection and log in, but I cannot get apache to "answer the phone" so to speak.Runing "tcpdump -i eth0" shows me that my browser on a remote PC is attempting to connect, but without reply.If I send my browser to the ip address of eth1, I get the default CentOS new web server page as is the norm.Nothing shows in my /var/log/httpd/access_log or error_log at all... apache simply isn't answering.The httpd.conf is the original, and the one line I attempted to 'adjust' was the "listen 80" line, which I added the ip addresses specifically, but that didn't change anything.I am unsure how nmap can indicate the port is open and there is a service behind it, when on the same PC that ran nmap, I cannot connect at all.Might anyone have a clue to toss me so I can work to figure this out?

View 1 Replies


ADVERTISEMENT

CentOS 5 Networking :: Bind Server Not Responding To Client Queries

Mar 4, 2011

I am bit new to Linux and have setup caching-only name server with Centos 5.5. when i do dig server, it provide resolutions. but when i use the server IP as DNS on my windows client, it says, "connection refused" on the NSlookup output. (IP table didn't enable) My server Ip is 192.168.1.253 and bellow is the configuration of "/var/named/chroot/etc/named.conf"

options {
listen-on port 53 { 127.0.0.1; 192.168.1.253; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt"; .....

View 9 Replies View Related

CentOS 5 :: Make Daemons Dump Core?

Oct 22, 2010

I modified the following files according to all I found after googling the net:

/etc/security/limits.conf
* soft core unlimited
/etc/profile
ulimit -c unlimited[code]....

I don't get a core file when I kill -11 <pid_of_sleep>

System is centos 5.3

View 3 Replies View Related

Networking :: Connect To A Vpn Server - The Required Daemons - Pppd And Pptpd - Aren't Availabale

Apr 12, 2010

I want to connect to a vpn server and I'm using debian 5.

I installed Kvpnc package but when I try to make a new profile I choose "Microsoft pptp" as vpn type and I receive the following message: the required daemons (pppd and pptpd) aren't availabale

Is there anyway to download required daemons in another computer and use them in my computer (I'm worried about dependencies)?

View 3 Replies View Related

CentOS 5 :: Yum And Rpm Are Not Responding?

Jan 12, 2011

For some reason yum and rpm dont do anything when i run yum or rpm commands I cannot reboot at this point.

[Code]...

View 12 Replies View Related

CentOS 5 :: Few Commands Not Responding After Upgrade To 5.3 From 5.2?

May 15, 2009

I just updated my CentOS machine from 5.2 to 5.3. After rebooting, I found a few commands are not responding after the update.

The non-responding commands are:finger, groups,chown I did nothing after the update.

View 2 Replies View Related

CentOS 5 Server :: 5.3 Network Stops Responding?

Apr 24, 2009

after a update to 5.3 from 5.2 via the built in updater the system stops responding to visitors from the outside, http that is, but heres the odd part, if i say run firefox on the server the connection works also for some reason if i'm on the network with my own computer the connection seems to stay open but as soon as i stop using these the server seems to drop the conenctions, but as i said as soon as i go via my comp to the server via say ie it works right away.

this i tried yesterday:did a cold boot to see if some update had problems and actually needed a reboot even if the updater didn't say, after it started the connection seemed to be open for a good while, and not untill this morning from a outside source the connection is droped again, not been on my comp nor logged on on the server today yet.the install only has on it what i got from the dvd, and as far as i know it has all the updates on it since 5.3 came out.my network is built up like this:

modem
|
firewall-switch-computers

[code]....

View 19 Replies View Related

CentOS 5 :: Nautilus Stops Responding With 100% CPU Use In Some Directories?

Jan 9, 2010

I was wondering if anyone else has noticed the following behavior lately. Sometimes, when I enter a directory, during the generation of thumbnails nautilus freezes up with 100% cpu use. It has to be killed. It will then happen whenever I try to enter that specific directory with nautilus (although access with Konqueror or command-line is fine). Turning off the previews allows nautilus to enter that directory (usually... once even that didn't work). If I create a new directory and move all the files from the troublesome directory into the new directory, I can enter the new directory with nautilus and it works fine, even with thumbnails turned on. I can even rename that directory to the same name as the problematic one had and it will work. Long ago this behavior used to happen very rarely, then it seemed to be fixed, and now it is happening again but fairly frequently.

I was just wondering if anyone else has experienced this and, if so, do they know what is causing it? A simple solution is to turn off thumbnails but I'd prefer another solution.

View 2 Replies View Related

CentOS 5 :: Opening PHPMyAdmin - Server Not Responding

Sep 16, 2010

I got this error when opening phpmyadmin, I check that my mysql is keep automatic closed.
#2002 - The server is not responding (or the local MySQL server's socket is not correctly config).

View 5 Replies View Related

CentOS 5 Server :: Dovecot Postfix POP Not Responding?

Jan 2, 2011

I am running CentOS 5.2 on a server here in my home. It runs Dovecot and Postfix and also serves as a website host for a small website of mine. Everything works fine. POP, SMTP, Webmail, WWW, all works great and has for ages.Here's the issue. I recently reinstalled a clean copy of Windows 7 on a workstation in my home onto a new harddrive(I still have the old drive int he machine so I can boot to it as well). I setup the Windows Live Mail client to send/receive mail with my mail/web server. However, it won't connect to the POP server on my server machine.Here's the kicker. If I boot to the old harddrive that is running Windows 7, it connects fine to my mailserver and can send/receive just fine. I've checked, rechecked and rechecked and all mail settings on the mail clients on both drives are identical.

Note: The installations of Windows 7 on both drives is identical. Same computer name/ same credentials, same IP, etc. However, as I stated, I can send/receive email with my server if I boot to my old drive, but if I boot to my new drive, I cannot send/receive.

View 2 Replies View Related

CentOS 5 :: Error - "ESC Is Already Running, But Is Not Responding. To Open A New Windows

Jun 20, 2009

After I login to KDE I see an error dialog saying,"ESC is already running, but is not responding. To open a new windows, you must first close the existing ESC process, or restart your system."

What is ESC and what can I do to stop this error dialog from popping up right after I login?

View 2 Replies View Related

Networking :: SNMP Not Responding?

Aug 29, 2010

I have installed Net-SNMP.It is binded to port udp 161I start it with the command: snmpd -Lo
when I do snmpget -v 1 -c public localhost system.sysObjectID.0on the same machine the snmpd is running on- I get a respond SNMPv2-MIB::sysObjectID.0 = OID: ccitt.1when I send same request from another machine (using SNMPc program) - I see no reaction.I used "wireshark" to monitor packets, and I see the requests sent from the other machine. I also see them get to the first machine.

View 1 Replies View Related

Ubuntu Networking :: Nfs Lockd Not Responding

Sep 29, 2010

I have been using 10.4 as a Linux NFS server to share it's storage with a number of Mac computers we use in the office. All the Macs are configured to connect to the Linux server using the mount_nfs command in terminal.I have been using this method to transfer files to and from the Linux server for a while. Today, I installed a number of standard Ubuntu updates / security patches per the standard GUI update tool.

Now, I'm getting "nfs server 192.x.x.x:/media/video: lockd not responding" error messages. I have not seen this error before, and I haven't changed anything else about the configuration of the Linux server or the Macs with the exception of the installation of the security patches.

View 1 Replies View Related

Ubuntu Networking :: Internet Not Responding At All

Feb 12, 2011

i can only browse some websites with my lucid(10.04), others not responding at all. ping working well but telnet (website) 80 returns nothing for some and works for others!!! i have no problem with my win7. any idea? a virus in my ubuntu? i just used ubuntu software center and sourceforge.jp for my sources and softwares. i checked for iptables rules but there is no block.

View 1 Replies View Related

Networking :: Kernel:Nfs Server 10.xx.xx.xx Not Responding

Dec 14, 2009

I am getting an var log error while mounting remote file system to the client side as:- Kernel:NFS: Server 10.47.152.70 is not responding, still trying.

The issue is client side machine is getting hang, after i mount the file system.

I have exported the file system as ext3 at the server side using Veritas Cluster. And importing it on the client side by including the shared directory in fstab.

View 2 Replies View Related

Networking :: Qmail Not Responding On Public Ip?

Mar 11, 2011

I have problem with qmail. From today I can't connect to my server, when I login via ssh on serwe and check

Code:
telnet localhost 110
I can connect but when I try

[code]....

View 3 Replies View Related

Fedora Networking :: LTSP - NFS Server Not Responding?

Feb 12, 2009

Currently have a problem with my LTSP server when using a gigabit switch with a megabit thin client.I am using K12LTSP with Fedora 9.The thin clients get most of the way through booting up then I get error messages saying:nfs: server 172.31.6.1 not responding, still trying.I don't get this problem if I use a 100 meg switch though.I have found several forum posts on the internet which all seem to point to the following webpage with a solution:However, when I make the recommended changes It doesnt make a difference.Below is an example of the default file located at /var/lib/tftpboot/ltsp/i386/pxelinux.cfg with its default settings:

Code:
prompt 0
label linux

[code]....

View 5 Replies View Related

Ubuntu Networking :: Machine Not Responding To Ping?

Jun 3, 2010

I am running ubuntu 10.04 on a VMWare Server virtual machine. I have assigned the ubuntu machine an ip address of 192.168.17.101. The ip address of my Windows machine hosting the Ubuntu VM is 192.168.17.100.

From the Ubuntu machine, I can ping all other machines on the local subnet. But when I try to ping the ubuntu machine, it does not get a reply.

I have a clean, plain install and the only software I have installed is Nagios.

View 1 Replies View Related

Networking :: Host Not Responding To DHCP Request?

May 18, 2009

I am running a 2 NIC system with the routing table for eth0 allows user access to the internet,etc. and eth1 routes to another private network (192.168.x.x). eth1 is configured to handle DHCP requests.When a device connected via eth1 boots, it requests an IP from the DHCP server. Using tcpdump, eth1 is receiving the request but is not offering a lease.dhcp.conf seems to be configuring the DHCP service correctly. and dhcpd is running.The host is running Red Hat Enterprise Linux (Server Edition) 5.1. Perhaps I need to modify fire-wall rules (or disable them on eth1 altogether)?

View 2 Replies View Related

Fedora Networking :: Server Is Not Responding To The Traceroute Command

Aug 10, 2011

As i've installed the new fedora update packets ,i've seemed to develope a strange networking problem .. Network description Fedora 15 with 3 LAN adaptors eth0 > LAN (IP address 192.168.0.254)eth1 > network connected to a pppoe conection eth2 > WAN to another provider. Ok so let's ignore eth2 because i've disable mangle(i was using trafic shifting on some ports). So now i'm using it as a simple NAT server .. so the problem is : >>my server is not responding to the traceroute command is it should .. the network works thou but this is what i get. C:UsersDUAL>tracert google.ro

[Code]...

View 3 Replies View Related

Ubuntu Networking :: Sudo Modprobe NDISwrapper Not Responding

Apr 4, 2010

My current situation is that the command "sudo modprobe ndiswrapper" is not responding, nothing happens. I am using [URL] as my guide and the "sudo modprobe ndiswrapper" is my next step. Here is some general information that you might ask for:
I received ndiswrapper utilities from "Synaptic Package Manager"
I was using jaunty jackelop before hand and the instructions worked perfectly but I decided to update to Karmic Koala 9.10 (I first installed the cloud enterprise version and realized that was way over my head).

View 9 Replies View Related

Networking :: DHCP For Diskless (PXE) Boot - Server Not Responding

Jan 7, 2009

I'm attempting to set up a server for performing diskless boots here. I'm using Gentoo 2008, and have followed the instructions here:

[URL]

I've gotten to the end of the basic DHCP setup, and I can not get the server to issue addresses. I've confirmed dhcpd loads up OK, and is running in top.

Here's the contents of /etc/dhcp/dhcpd:

Code:
# Disable dynamic DNS
ddns-update-style none;
# Assume one default gateway for IP traffic will do

[Code]....

View 6 Replies View Related

Networking :: Iptables - Site Stops Responding After An Hour?

May 11, 2011

My config works fine when enabled but after an hour the site stops responding at all. When I restart, flush or disable iptables it works fine again. Wondered if anyone could see any glaring errors I've made

# Generated by iptables-save v1.3.5 on Tue May 10 17:06:48 2011
*mangle
:PREROUTING ACCEPT [6034:13920296]

[code]...

View 3 Replies View Related

Ubuntu Networking :: Network Manager Stopped Working - Not Responding

Jul 26, 2011

My network manager application went missing a few days ago. I enabled it by right clicking on the taskbar above and opting for "show". It reappeared and worked fine. After I rebooted, however, it was there ok, but it doesn't respond to clicking at all. It has stopped working.

View 1 Replies View Related

Networking :: Invalid Query Packet - Destination Host Not Responding?

Jan 13, 2010

I am an 'experienced perpetual newbie' using Ubuntu 9.04. I know a little about quite a few things but nothing past intermediate knowledge so:I am trying to set up a simple LAN between 'rhino' (192.168.1.102) and 'polly-laptop' (192.168.1.101). My router address is 192.168.1.1

From polly-laptop:
sudo mount rhino:/home /media/rhinohome
polly-laptop can access rhino:/home fine.

[code]....

View 8 Replies View Related

Ubuntu :: Where To Control (REAL) Daemons KDE?

Jan 30, 2010

Anyone knows where I can control daemons startup on KDE? On systemsetting there is only KDE daemons, I want to control startup of crond/mysqld/apache2d and son on.

I want something like this from Gnome

View 3 Replies View Related

Ubuntu :: Daemons Being Killed On Logout?

Jan 20, 2011

How do I prevent ubuntu from killing my server daemons on user logout. I have the user irc which I run Unrealircd on but unfortunately I have to be logged into that user in terminal to keep it running, the moment i exit it loses connection in xchat.

View 9 Replies View Related

General :: Filtering Daemons List?

Feb 10, 2011

How do i filter the daemoms list for just 1 letter and then turn off certain run levels for that daemon?

View 2 Replies View Related

Ubuntu Networking :: Wireless Not Responding After Dead Battery Shut Off / Get It To Work?

Oct 19, 2010

System: hp pavilion dv7 running ubuntu 10.04

Today my laptop battery died and after i plugged it in and restarted it said that networking was not enabled. hitting the networking key didn't re-enable it. i right clicked the wireless icon in the tray and clicked "enable networking" and it enabled it but no networks showed up as available and the networking status light on my keyboard stayed red. I've restarted the computer several times to no avail. anyone know what i need to do?

View 2 Replies View Related

Fedora :: 10 Show Daemons Loading At Boot?

Feb 2, 2009

Just installed FC10. I edited the /etc/inittab to start FC at the command prompt. However, how can I change the boot so that I can see the daemons loading not just that graphical bar at the bottom of the screen.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved