After installing the "fuse" and "fuse-ntfs-3g" packages, my ntfs formatted thumb drive mounts read only, as follows:# mount.../dev/sdb1 on /media/disk type fuseblk (rw,noexec,nosuid,nodev,allow_other,default_permissions,blksize=4096)
I installed CentOS 5.5 32-bit with Gnome and want to use it as a file server. The volume I wish to share is a 1.5TB NTFS partition stored on a USB drive. I installed "ntfsprogs" and "fuse-ntfs-3g" to get NTFS support. However, I only have read access to the volume.
How can I fix this and get Read+Write to the NTFS drive?
I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection.I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives.I have created the directory /archive/ where I would like the drive(s) to mount.The drives are all formatted Fat 32 - but in the future I may use HFS for formatting.When I used the command (as root):mount /dev/sdc1 /archivethe drive was mounted (but read only)What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing)Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives?
I have installed Ubuntu 11.04 64 bit desktop version on ext4 partition without swap. I have maximus iv extreme motherboard with 8 Gbytes RAM. Using 3 internal ntfs formatted hard drives and 3 external ntfs usb 2.0 hard drives.When I am trying to copy or move files FROM or TO any ntfs partiton it is 90 percent chance it is going to freeze.For copy/moving files I am using krusader run as ROOT or as user without root privilege or Nautilus as user without root privilege. It wasn't possible to switch to another terminal - it simply does not react on keyboard or mouse input and only hard reset is possible (scares me because of ntfs disks)From this point of view I have suspicious on ntfs driver but:I am completely beginner in linux and I am looking for help to navigate me how to investigate to find what is causing the problem eventually to solve it?
According to my experience it seems to does not matter if hard disk is internal or external connected through SATA II or SATA III or USB 2.0. I have tried to manipulate with ntfspartitions through the vmware or virualbox or truecrypt software or just do a simplecopy/move files - it have has always the same results - freeze. There is not possible to say how long it is going to work properly and when it is going to freeze - sometimes it's working hour, sometimes it's working couple of seconds - no matter if it is read or write operation/s within ntfs partition.
I have 64GB USB stick NTFS formated. I'd like to exchange files much bigger than 4GB between windows and linux. FAT32 doesn't support files bigger than 4GB. Is it possible to mount NTFS RW under Debian Lenny?
I followed the steps in the wiki shown here: [URL] But when I try to mount an ntfs drive I get an error insisting the fuse module isn't installed. I try to modprobe fuse and it says there is no fuse module.
Yum confirms that : Package fuse-2.7.4-1.el5.rf.i386 already installed and latest version Package fuse-ntfs-3g-2009.4.4-2.el5.rf.i386 already installed and latest version Package dkms-126.96.36.199-1.el5.rf.noarch already installed and latest version Package dkms-fuse-2.7.4-1.nodist.rf.noarch already installed and latest version Package kernel-xen-devel-2.6.18-128.1.10.el5.i686 already installed and latest version
sudden of all all USB drives and sticks I put into a PC will not mount with read/write permissions (they did before). I can still copy to them, but only when I am root. I am on Maverick I've noticed though that if I run disk utility, then UNMOUNT the partition, Check File System, Mount the partition back, I get read/write access..
I am having a problem writing to an NTFS pendrive. I have created the NTFS pen drive in the following way:
Code: fdisk /dev/sda created the label with 'o', then written the table with 'w'
I've then gone into fdisk again : Code: fdisk /dev/sda started the partition creation with 'n', and chosen 1 partition '1', then written that with 'w'
I then used mkntfs to format: Code: mkntfs /dev/sda1 The blkid command gives me this output: /dev/sda1: UUID="58CEA9511D6BCEFA" TYPE="ntfs"
I can mount the pendrive (as root) with: Code: mount -t ntfs /dev/sda1 /mnt/pendrive and the mount command output: /dev/sda1 on /mnt/pendrive type ntfs (rw)
I have changed the permissions on /mnt/pendrive (while mounted) to 777, owner/group=root. However, when I try to copy something to the drive I get this error: cp: cannot create regular file `/mnt/pendrive/file.txt': Permission denied
I installed AlienBob's KDE 4.6.2 a few days ago to give it a shot.
I'm really satisfied with it and wish to keep it, but there's one thing bugging me : I can't write to my NTFS USB drives.
To be precise, I can write as much as I want to existing files, but I can't add nor delete files nor directories.
Worse, root isn't allowed either, even in runlevel 1 when mounted by hand (mount -t ntfs /dev/sde1 /mnt/foo).
Did I miss something to configure among the dependencies of KDE 4.6 ?
Output of /var/log/messages
Code: May 11 08:37:52 rafale kernel: [46953.570204] usb 1-6: new high speed USB device using ehci_hcd and address 6 May 11 08:37:53 rafale kernel: [46954.274818] usb 1-6: New USB device found, idVendor=1058, idProduct=0730 May 11 08:37:53 rafale kernel: [46954.274821] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
I am running Karmic x64 on a HP laptop that has a cd/dvd burner. I have a r/w cd with files on it and I wish to add/remove files to it. After it mounts automatically on insertion, I unmount it and remount with: sudo mount /dev/sr0 -t iso9660 -w /media/cdrom (I tried assorted other hare-brained things also) but it always says that the filesystem is read only. Do I need to use a different device than sr0? Is it even possible under Ubuntu?
We have a network with several computer. We have two file servers (don't ask why) an Ubuntu and an XP as well as many clients. Setting shares on Ubuntu was easy and all clients can see them read and write. but I can't get the Ubuntu clients to see the SMB shares on the XP properly. This is my fstab:
I don't want to have to download the kernel source and uncomment out CONFIG_UFS_FS_WRITE=yes and build a custom kernel ever time I update the kernel. Is there a better way? Like when Ubuntu.deb repositories claim a stable kernel is there an auto config script when installing from synaptic -or- aptitude? Like any way to add this one config opt to .deb kernel W/O building custom one from source?
So I currently have OSX and Windows 7 install on my hardrive - I would like to add 10.04 in the mix, however it will not let me resize my Windows partition because it does not recognize it as ntfs. It will not let me mount it via cli or gui and gparted will only offer to remove the partition - not resize.
I need some assistance mount a UFS2 partition as read and write. if its not possible, then I may have to copy a few hundred GBs of data. Currently using the command: Code: mount -r -t ufs -o ufstype=UFS2 /dev/sdb /Data Thats just read only.
I used dual booting with Windows Xp and Ubuntu 10.04. Because errors, I reinstall Windows and then I could not enter GRUB, and Ubuntu partition disappear. I tried to reinstall ubuntu using live CD but I could not detect last ubuntu partitions. After I installed fresh Ubuntu on new partition, I got error message like this:
Unable to mount floppy0 Mount: block device /dev/fd0 is write protected, mounting read-only Mount: could not determine the file system type, and none was specified
I'm trying to configure a per user samba login for full access to the user's home directory.Mounting the shared directory works flawless when mounting from Windows. I can read, write, create without problems. However, when mounting from Linux the shared space is readonly.
I have a videos server here at work running Mandriva 2009 Spring and I need to copy a 10 gig file from it to a USB drive. The drive needs to be readable and writable from Windows. The file size rules out FAT, and when I try to write to it when formatted as NTFS I get an error about it being a read-only file system. How can I get NTFS support up and running?
I'm new to debian ,I was trying to mount my NTFS partition but I did that only with read permissions I couldn't install ntfs-config(allthough I have ntfs-3g installed).So I want to figure out how to mount my partitions with read/write permissions automatically as the systeme starts ?