CentOS 5 :: Installed 5.3 On An External USB Drive But Can't Boot From It

Oct 5, 2009

I recently installed CentOS 5.3 (from DVD media) on a Seagate 320GB external USB drive; this drive is connected to an Intel-based desktop computer (Intel D945GNT motherboard) with two internal SATA drives (both NTFS, as I'm running Windows XP SP3 as my primary OS). The install found the USB drive fine, and I manually configured my partitions; I had the install place the boot loader in the first sector of the boot partition of the external USB drive. I had set my BIOS to boot from the USB drive first; after a reboot, nothing happened...no GRUB menu, nada.

After some research, I had found an article discussing the need to rebuild the initrd for USB drive support. So, I booted the computer from the CentOS DVD, then went into 'linux rescue' mode; once I was at a command prompt, I navigated to the /boot directory and executed the following command:

mkinitrd --with-usb --preload=ehci-hcd --preload=usb-storage --preload=scsi_mod --preload=sd_mod ./usbinitrd-2.6.18-128.el5 2.6.18-128.el5

After the new "usbinitrd" was created, I edited grub.conf to reflect the new image, then attempted the reboot again from the USB drive. Still no GRUB menu.

View 2 Replies


ADVERTISEMENT

CentOS 5 Hardware :: Can't Boot With External USB Drive Installed?

Sep 30, 2009

I installed the latest download of centos 5 on to a older dell optiplex gx260. install went fine. I then hooked up an external 1tb USB drive, formatted it ext3 from inside the LVM, and mounted it to /usb-mnt. the mount command is in /etc/fstab like normal: /dev/1tb-usb/1tb-usb /usb-mnt ext3 defaults 1 2

all of the steps taken were straight out of the gui now on boot up I get: checking filesystems fsck.ext3" No such file or directory while trying to open /dev/1tb-usb/1tb-usb [FAILED]

*** an error occurred during the file system check
*** Droping you to a shell; the system will reboot
*** when you leave the shell.
give root password for maintenance
(or type control-D to continue):

and yeah all the /dev entries are gone. I have rebooted in linux rescue mode from the install cd, commented out fstab and been able to boot. but that doesn't actually get me to having this disk available. how to I get the system to see the drive again? if I add it back to fstab is just goes into the above. I don't seem to be able to get LVM to see the disk anymore to reformat it, I can't get the system to allow me to access it so I seem stuck.

so how do you get the system to reprobe and add a drive that once existed? uname -a output: Linux guff.domain.edu 2.6.18-128.el5 #1 SMP Wed Jan 21 10:44:23 EST 2009 i686 i686 i386 GNU/Linux

View 6 Replies View Related

Software :: Ubuntu Installed On External Hard Drive, Can't Startup Without External Hard Drive?

Jan 14, 2009

I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external

When I startup without my ext drive =>GRUB error 21.

And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...

I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.

View 14 Replies View Related

Ubuntu :: Have Installed On The External Hard Drive?

Mar 29, 2010

I have another question. When again restart the computer, I lost everything I had installed before. I am sure there is option somewhere to be turned on. I do not know where it is? Is there anybody can tell me where it is? I have installed UBUNTU on the external hard drive.

View 9 Replies View Related

Ubuntu Installation :: Booting An Already Installed From Usb External Drive?

Apr 5, 2010

installed Ubuntu 9.10 in an internal SATA drive and used it for quite a while, but yesterday my laptop's graphics card decided to die, and it looks like it will be a full month until I get replacement m/b. Therefore, I bought an external USB SATA Hub for my laptop's drive, but I can't seem to be able to boot ubuntu from this drive. I'm trying to boot with this external usb hub attached to an old P4 machine with USB booting enabled.I get till the grub screen, but as soon as the message "Grub loading" appears, I get a message saying:error: no such partitionand I get a prompt as follows:grub-rescue>I guess grub is trying to boot to a different device name... It's weird, I thought Ubuntu should boot irregardless of which interface I use, be it SATA or USB.

View 2 Replies View Related

Ubuntu Installation :: Installed To External Hard Drive / Whole System Is Very Slow

Aug 3, 2011

My father installed Kubuntu to his external hard drive to try it out, however, it is running extremely slowly. It takes a good minute and a half to boot to the Plasma desktop and it even seems to run faster off of the LiveCD.His system easily meets the specifications to run Kubuntu (4 gigs of RAM, decent NVIDIA graphics card) yet it slows to a crawl immediately upon booting. Does anyone know how to fix this? The hard drive is a Western Digital MyBook, 475GB model.

View 4 Replies View Related

Ubuntu :: System Installed On A External Hard Drive, Themes Aren't Loading?

May 17, 2011

I've installed Ubuntu 11.04 Natty Narwhal on a External HDD (320GB Samsung S2). Worked like a charm. Bit slow to boot up and load programs, but after a while, works great. I installed it on the external HDD for one purpose: Work anywhere with Ubuntu, no matter which computer I use. I was thinking that was impossible, but I've tested thru several platforms (3 Notebooks, 2 netbooks, all Intel and one AMD Desktop). All worked flawlessly (32 Bits PAE activated and no matter how many cores are active, just works), BUT the themes.For no apparent reason, themes works on the computer I've installed Ubuntu on the HDD. It has his own Internal HDD with Windows 7 and two NTFS partitions.

Themes are stuck to the default boring-white from Gnome. I can only change the window controls. Compiz works, Wireless works, video works, sound works, filesystem works, system works - themes fail. Feels like I've hit my feet's little finger on a chair. P.S.: Ext. HDD is partitioned like this: 300GB FAT32 (it's my pop's HDD, he wants it this way), 18GB EXT4, 2GB Swap.

[Code]...

View 1 Replies View Related

OpenSUSE Install :: Boot From An External Drive / Set Up A Triple Boot?

Jan 4, 2010

does anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?

how about FireWire, will it work?

i'm trying to set up a triple boot for me newly bought iMac.

View 4 Replies View Related

General :: CentOS 5.5 - External DVD Drive Does Not Show Up

Dec 5, 2010

Installed CentOS 5.5 some time ago and I can proudly say I am more than satisfied with it. Managed to install codecs, flash player, media players, chrome and opera browsers and all other things I need. My only problem is that as of about a week ago my external DVD player is not recognized any more by CentOS so I am unable to watch movies. My external DVD player is Magnavox and it works great but CentOS does not recognize it any more. I used to watch movies in CentOS in SMPlayer all the time. What to do to get it back?

View 1 Replies View Related

CentOS 5 :: Executing Bash On External Drive

Jun 7, 2010

I have a CentOS system totally devoted to a 500GB disk. I have an additional disk mounted via an external device that will not execute scripts that are located on that device.

Current hardware configuration:
Quote:
t [root@localhost ~]# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 60801 488279610 8e Linux LVM

Disk /dev/sdd: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdd1 * 1 42261 339457466+ 83 Linux
/dev/sdd2 42261 60801 148925985+ 5 Extended
/dev/sdd5 59372 60801 11486443+ 82 Linux swap / Solaris
/dev/sdd6 42261 58671 131814400 83 Linux
/dev/sdd7 58671 59371 5623808 82 Linux swap / Solaris

Partition table entries are not in disk order
[root@localhost ~]# uname -a
Linux localhost 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:08:30 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
[root@localhost ~]#

View 17 Replies View Related

CentOS 5 :: Anaconda Unmounting DVD From External Drive

Oct 25, 2010

I have an external DVD burner hooked up to an EEE PC 701SD. The disk has worked on a dell desktop computer, and a 701 (the first eee pc which I built the install on) without a problem, however when I boot up the install disk on the 701SD, I get a message telling me it's unable to download the kickstart file. It's being set to cdrom:/ks.cfg, which should work, but it isn't.... This exact same disk just did a full install on the 701 15 minutes before I ran it on this computer.

View 8 Replies View Related

CentOS 5 Hardware :: Connect IOSafe Solo External Usb Drive?

Oct 22, 2009

I am trying to connect IOSafe Solo external usb drive. The systems sees it then disconnects it.

View 1 Replies View Related

CentOS 5 Hardware :: External Hard Drive Stopped Working?

Aug 26, 2011

I have a 2TB hard-drive connecting via a usb port on my server for automatic backups. I noticed the backups had stopped working and then I realize I had lost the ability to communicate with the drive.

/sbin/lsusb gives:
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 003: ID 046b:ff10 American Megatrends, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046b:ff01 American Megatrends, Inc.
Bus 001 Device 005: ID 059f:1018 LaCie, Ltd

[Code]...

View 1 Replies View Related

CentOS 5 :: Centos 5.2 Installed On /dev/hda3, Won't Boot, Cant Find Grub Stage 2?

Nov 10, 2009

I just upgraded by box from Fedora Core 9 to Centos 5.2. Finally!I have a 500GB SATA drive, it's partitioned into three equal size slices, hda1 through 3. The old Fedora was on hda1, I installed the new Centos on hda3. I instructed the installer to write the MBR to /dev/hda, not /dev/hda3. Fdisk says I have sector 0 unused.First, the system wouldn't boot - it just looped through the BIOS, rebooting over and over again. The BIOS sees the disk, but it never loaded Grub. I tried re-running grub-install /dev/hda, and not I get a Grub Error 17 after stage 1.5 loads.

I can boot from rescue OK, the grub.conf man menu.lst look fine, it's pointing to "root (hd0,2)". It's either the BIOS that can't find the MBR, or the MBR can't find Grub.When I looked at the disk with fdisk after the install, hda1 was still marked bootable, hda3 was not, so I swapped bootable flags but that has not made a difference. I also appended the new grub to the old grub thinking I could get the MBR (if it is there) to load the old grub and thence find the new Centos, but that didn't work either.Mobo is an old Shuttle AK35.Any ideas? Did I mess up by not telling the system to put the MBR on /dev/hda3? Is there a way to fix this without reinstalling?

View 2 Replies View Related

Ubuntu Installation :: Boot Eee From External Cd Drive?

Mar 13, 2010

I was wondering wether it is possible to boot an eee 901 from an external usb cd drive? (for those who are unfamiliar with the eee, it has no internal cd drive) The cd drive is not listed in the bios boot menu.

View 2 Replies View Related

Ubuntu :: External Hard Drive - Able To Boot ?

Apr 25, 2011

Approximately 2 and a half years ago, I got a netbook from my Grandfather loaded with Windows XP Home Edition. For some reason it crashed on my and when I booted up my netbook again, it didn't show my anything but black screen.

From that time I wasn't able to use my computer until I discovered ubuntu and used it on my netbook. I, then, downloaded Windows 7 (lite) and got it on my netbook. The only problem that bugs me is that I want ubuntu and windows 7 and I cant because there is less disk space.

I have an 500 GB external HARD DRIVE. I want to be able to boot into UBUNTU using that. Is there a possible way to do it?

View 1 Replies View Related

Ubuntu :: External Hard Drive Boot?

Feb 25, 2011

i have created a live ubunto live cd from an iso file...this cd boots just fine. however, after a successfull installation onto my usb e -hdd, and a restart that spits out the live cd from the rom, my pc absolutely will not boot from the "installed version".i did the install with the internal hard drive dis connectedthe live cd will run just fineubuntu is installed correctly on the external and restartsat this point (no live cd in the dvd drive) the ehd will not boot..pc just sits therei choose booer options and choose the ehd.....this cycles through a few dos commands looking for internet and what not but will never boot

View 9 Replies View Related

CentOS 5 :: Install The Reiserfs Drivers To Read / Write To External Drive?

Jul 20, 2009

I am trying to install the reiserfs drivers to read/write to my external drive. But keep getting command not found. Although the system can get man pages for modprobe.

modprobe reiserfs
bash: modprobe: command not found

I also need to know how to add myself to the sudoers file. I have already tried visudo but this has not worked.

View 1 Replies View Related

CentOS 5 Hardware :: USB External Hard Drive - Entry In Fstab File

Nov 13, 2009

I have centos 5.3 installed. I plugged in a WD usb external HD, Icon is showing up on desktop everything is working formatted with ext3. I would like to have an entry for this in my /etc/fstab file, and I need to know how to enable Quotas on some files on it.

View 3 Replies View Related

Debian Installation :: Won't Boot From External Hard Drive

Sep 18, 2015

I have got a 1TB USB hard drive, which I partitioned to be 500GB NTFS and on the other half I installed Debian 8.1.0. During graphical install I selected to install the bootloader not to the MBR but also to the external drive. After completing the installation I wanted to boot into Debian, but it just started Windows, which is installed on my internal. Even after choosing the USB drive in the boot menu, Windows booted. I later installed the bootloader to my internal, then I could boot into both Debian and Windows, but only if my hard drive was plugged in.

View 14 Replies View Related

Debian Installation :: Cannot Boot From External Hard Drive

Feb 20, 2016

I have a 2TB external Hard drive that nonetheless is being used for booting Debian off of. I have downloaded the "debian-8.3.0-amd64-netinst.iso" and have extracted it to my external hard drive. The letter assigned to this drive is "I". When I shut it down and enter the boot settings, it asks me for a name and a path for a new boot option. I have tried many different paths including:

Code: Select allI:setup.exe
I:autorun.inf
I:debian.iso
setup.exe
debian.iso

I renamed the original Debian download (debian-8.3.0-amd64-netinst.iso) to "debian" so I didn't have to type the long file name into the path. When I type in "I:debian.iso" as the path and restart it pops up with a grub prompt, in my mind that tells me that some part of the debian.iso file is corrupted.

Specs:
Dual Core i5-3317U, 1.7 GHz, Turbo boosted
8GB RAM
1TB Internal Memory
64-bit OS and processor
Windows 8.1 Default OS

View 5 Replies View Related

General :: IMac Boot From Partition On External Drive?

Apr 3, 2011

I have the following "setup:"

iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]]
|
|
|[code]...

I routinely use the firewire drive to boot MAC OS X.However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd).My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)...Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.

View 1 Replies View Related

Ubuntu Installation :: Dual Boot Xp With An External Drive?

Jun 30, 2010

The thing is i want to have windows xp on my internal drive and ubuntu on the external. Not very hard but i want it so that i can choose what to boot when i start my computer and i also want to store other things then ubuntu on my external drive so i can use it in xp also

The reason i want ubuntu for is to use it while watching movies or chatting osv and use xp for games and my animation programs since they tend to be quite hard to get to work on ubuntu.

View 2 Replies View Related

Ubuntu Installation :: Cannot Boot Without External Drive Plugged In

Jan 16, 2011

I have installed ubuntu 10.10 on and external usb drive and now my computer which runs XP will not boot unless the external drive is connected and on. Can I by pass this situation or do I have to uninstall ubuntu altogether and start over?

View 3 Replies View Related

Ubuntu Installation :: Can't Boot 11.04 From External Hard Drive

May 10, 2011

I am having trouble booting ubuntu 11.04 from my external hard drive, i did a custom instal using the 11.04 CD.

i made 4 partitions
/dev/sda1 ext2 /boot 1024mb (1gb)
/dev/sda5 swap 4096mb (4gb)
/dev/sda6 ext4 / 10240mb (10gb)
/dev/sda7 ext4 /home 204800mb (200gb)

and i put grub on the one what was mounted to /boot.

but my problem is when i restart my computer it just starts up windows.

my external hard drive is on, i have it set to boot from removable storage or something like ehtat first. i forget what i just know that booting from my internal hard drive is set to last so it should boot from the external.

View 3 Replies View Related

CentOS 5 Hardware :: Support HP EH854A LTO4 External SCSI Tape Drive?

Mar 24, 2010

Does CentOS 5 support HP EH854A LTO4 External SCSI tape drive?

View 3 Replies View Related

General :: CentOS 5 Installation - GRUB Installed On USB Drive

May 23, 2010

I installed CentOS via unetbootin and USB stick. Unfortunately, I can not now start my system w/o my USB usb drive.

View 1 Replies View Related

Ubuntu Installation :: External Hard Drive - No Boot Manager

Apr 15, 2010

I originally had windows vista on my pc and then I installed ubuntu on a partition, then I decided that I wanted ubuntu to be installed on my external hard drive so that it can be run on any computer, so I installed linux on my external hard drive then I deleted the linux partitions on my internal hard drive, then to further complicate thing I decided that I wanted grub un-installed because it ran slow when reading off of a external hard drive and just use dell's normal boot selector so I inserted my vista cd and ran /fixmbr and /fixboot which deleted GRUB and returned the default booting into vista, now my problem is that when I try to run linux by using dell's boot devices options It won't run and says that 'there is no boot manager installed'. Is it possible to have ubuntu on a external hard drive so that it can be booted from any computer? if so, how can I do it?

View 4 Replies View Related

Ubuntu :: Boot From An External Hard Drive - Make An Iso Bootable?

Apr 5, 2011

I am trying to boot from an external hard drive, and have tried to use unetbootin like I used when crating a bootable usb drive but it does not see my external and will not create bootbale iso for me to run from my external hard drive.

View 2 Replies View Related

Ubuntu :: Won't Boot To The Internal Drive (with Vista) Unless The External Is Connected

Apr 27, 2011

I have an HP Pavilion that was/still is running Vista. I recently decided to dual-boot to Ubuntu from an external hard drive. Both systems will boot up fine its just that for some reason it won't boot to the internal drive (with vista) unless the external is connected. I just put the HD in another laptop only to have the same problem.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved