I got myself a shiny M305 Logitech mouse for my laptop. It comes with a littlee USB wireless dongle. When I plug in the dongle, DMESG shows me that the system notices the dongle:
usb 5-1: USB disconnect, address 6
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 5-1: new low speed USB device using uhci_hcd and address 7
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input15
I just installed Ubuntu 10.10 I love it. The only problem is my built-in mouse doesn't work. My usb mouse works fine but not the built-in one. When i was installing Ubuntu i used the USB mouse, The only problem is my mum needs it for her computer.
Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.
Last night I installed Ubuntu 10.10. Everything is going on very well. But after installation when I reboot the system my A4 TECH WIRELESS MOUSE (MODEL-G3-230)does not work. Its pointer is moving freely but no left or right click is working.My Keyboard is working fine without problem. Is there any solution to this problem?
About 5 years ago I bought a Logitech wireless keyboard. I want to add a wireless mouse now. Logitech has no docs on its website for the keyboard or receiver. Does anyone know how to figure out whether any mouse I buy now will be compatible with my old receiver? I know that all wireless mice come with receivers, but I have limited USB ports.
I use a set of keyboard + mouse Logitech MK330. So, they are wireless in five minutes of inactivity have to sleep. But sleep only the keyboard. The mouse does not fall asleep. On distro Ubuntu and Windows goes into standby mode, both devices. How can I fix it to Debian?
During installation Debian distro, mouse goes to sleep, but on the installed system will not go into standby mode.
I just purchased this mouse today. The box brags that one can insert the include AA battery, put the little remote in a USB port, turn the mouse, on, and away you go.
However, it doesn't work. I've gone through the whole troubleshooting guide, which generally consists of silly questions such as "Is the mouse on?"
My previous mouse was a logitech, but it was not wireless. It worked fine. Are there any restricted extras in order to get this beauty up and running? Or should I return it and invest in a more Linux-friendly mouse?
I need to get the comparative info off the new desktop, but I am currently hampered by the old mouse and the bug, whereby when I asked for the LXDE desktop I also got Gnome installed, and Lightdm ignores my request to start LXDE and dumps me in Gnome!!
The main differences that I have found was in the modules where the 32 bit one uses uhci_hcd, while the 64 bit one uses xhci_hcd. The dmesg section is like the above, finding the Unifying device, but is missing the last line where djdevice finds the mouse..
I have a Logitech VX Revolution, and I would like to change the "search/find" button to be used to middle click as opposed what it currently does, opening a new google tab in firefox. The mouse settings in System Settings does not have a tab for editing what the buttons do. (I thought there should be a Logitech tab, but I guess that is for USB only)
my Logitech webcam C 200 under openSuse 11.2-126.96.36.199 appears as046d:0802, but in Skype I cannot see any image when testing the webcam. The correct audio input cannot be chosen either, it does not even appear in the drop-down box.I've installed the same webcam on a different machine with openSuse 11.2 and it worked out of the box, so I don't think there should be any additional driver required.
I am running Xubuntu Lucid 10.04 on a Sony Vaio. I recently dropped $100 on a Logitech QuickCam Vision Pro for Mac, on the recommendation on the ubuntu wiki [URL].. that it would "work perfectly" in Skype. In Skype, it did nothing. No Audio, no video, light wouldn't even come on. Essentially a $100 dollar paperweight. I really think someone should correct this misleading information on the wiki.
I followed the kludge listed here [URL].. to get the video to work. By executing Skype with the shell script listed in the first post, I could get the video test to work, but no audio, and when I tried to call someone, when I turned on video, Skype quit suddenly. For the record, yes, I unmuted the device in the Sound Mixer in the top right corner.
Later on, I tested it with guvcview, and the cam worked perfectly in that program. It's only Skype that doesn't know what to do with it. When I execute Skype in Terminal I get the following output repeating over and over again:
Code: X Error, request 20, minor 0, error code 3 BadWindow (invalid Window parameter) X Error, request 15, minor 0, error code 3 BadWindow (invalid Window parameter) libv4l2: error setting pixformat: Input/output error libv4l2: error setting pixformat: Input/output error
I'm using a basically vanilla Lubuntu 11.04 My Logitech E 3500 webcam works fine with Cheese. I have just installed Skype, but my voice isn't picked up on the test call, and no video either (the webcam light remains off). I've tried logging off and into Skype.
I have a 5 button mouse and the 4th and 5th buttons are useful for skipping back or forwards while surfing with Firefox. It would be nice if I could skip back in Nautilus too, but it doesn't work. (Alt+LeftArrow & Alt+RightArrow as keybord equivalent) Is there a possibility to use this buttons in Nautilus too?
i have a regular ole USB mouse and got a USB hub to expand the number of ports i have. I connected my USB mouse to the hub which worked in Windows but when i booted up linux the mouse did not work. If i plug the mouse in directly then it works again but i would like to figure out how to make the mouse work using a hub but am not quite sure where to start,
I have installed fedora ver 10 on my PC. The issue is that my mouse does not work once i login, it hardly works for 5-10 mins and then does not respond, however system does not get hung. I am using USB optical mouse. Please help me in fixing the issue.
I was in 2.6.38.-2-amd64 and it was upgraded to 2.6.39-2-amd64. After the upgrade, every reboot disables the bluetooth mouse. There is a message from the panel with a bluetooth icon Bluetooth Device Authorization request from Logitec mouse... check authorization
I push the buttons on my mouse and the button on the dongle to try and get them to pair, but, the dongle does not work. It is not scanning when I push the connect button.I unplug the usb dongle, and plug it in again, and this time I am able to pair them, and the mouse works. But, I have to do this every time I reboot which is a pain. I found that in the previous kernel, The Bloothtooh package is 4.91-1, but it has been upgrade to 4.91-2. So, this is creating the problem.
When I'm using Nautilus, I've found (for years) that I've had to hit Ctrl+C, Ctrl+V or Del multiple times until the commands would register. I noticed this occurs when the mouse is moving. I've looked under System > Preferences but can't find anything. Is there a key in gconf or something that I can disable?
When I start firefox the mouse seems captured by it.I can use the mouse inside the firefox screen (change tabs, use menu, select/paste) but not anywhere else. Even if a popup appears (site wants to register a cookie) then I can only use the keyboard to "ok" it. alt-tab to another window is not possible.Using the mouse in the gome-panel won't work.I can get the mouse pointer anywhere on the screen but mouse clicks don't seem to register. I've had this problem before on 10.04 and the only thing that worked then was to create a new useraccount (a lot of hassle).
edit: The window manager also won't react to the mouse so closing the firefox window is not possible using the windowmanager buttons(X - 0)It's also not limited to Firefox,after I closed firefox via it's menu and then started a gnome-terminal the mouse was caught in that. After closing the gnome-terminal and restarting firefox it degraded even further in that the mouse would'nt even work in the window itself anymore.Only a reboor would reset the problem.
I installed a fresh copy of 11.04 which worked fine until you first login and then the left mouse button fails to work so I can't left click anything. The right ones is fine? this worked fine on 10 and for the 11.04 installer.
Im running debian lenny amd_64, but I have another machine here that also runs the 32 bit os, also have a friend who is trying to get this to work to o on ubuntu amd_64. Long story short wed like to play some quake 2, I tried to run it under wine with no success, and why run it with emulation(or the likes) when it was ported to linux. Anyway with some painstaking effort I have got it to run if I run it with the software X11 rendering it runs but the graphics are squished, and only take up the left half of the screen but the MOUSE DOES WORK just fine.
I am able to run it now in the other rendering glx, soft, but when I run it everything works graphics look great, but the MOUSE DOES NOT WORK at all. Ive seen some things saying that gpm maybe locking it and I need to shut it down, that being said I cant find out how to shut it down for debian or ubuntu or evidence that its even running in the processes of my system, I've tried killing the gnome manager but I still have the same problem.
I've also tried the icculus port, and the installers, but both seem to FUBAR quake 2, and were a pain in the ass to even compile. I've been able to get the id version running just fine with other than this hiccup.
Ive also heard I may need to chmod the mouse device file if so where is it?
How do I stop GPM on a debian/ubuntu system? If you know this is not the problem, what do I need to do to get the mouse to work? Wheres the mouse device file so I can Chmod it? If all else fails how do I get the gfx to not screw up when using softx?
I have a small issue I couldn't find a solution for. I'm running Centos 5.5 on a Fujitsu-Siemens S6120 laptop. When I boot my system and use the touchpad for the first couple of seconds my mouse cursor jumps around the screen sporadically and also mouse buttons "gets pressed" by themselves (without me actually touching them). After 1-2 seconds the situation becomes absolutely normal - mouse moves good and buttons work only when I press them. Everything repeats after the reboot.
I see the following error in the system log: psmouse.c: Mouse at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away
It appears right when I try to use the touchpad for the first time, I guess.
The situation isn't critical, but is quite annoying. Is there a way to get it fixed? I searched the Net, but found mostly issues with mouse loosing sync during operation - such thing never happened to me, as my issue appears only once per boot.
Got myself in a bit of a squeeze here. I was messing around with the Xorg install on my Fedora 12 system. I ended up reinstalling it. Now my mouse and keyboard work fine in single user mode / terminal. But if I try and boot to X they dont work at the login screen. HAL and udev are booting. Ive done a udevadm monitor test in single user mode and its seeing the devices connect and disconnect. Ive also tried both USB and PS2 devices. Same issue. Ive tried playing with xorg.conf and generating it with Xorg -configure :1 I dont know to use to fix it. After banging my head against the wall for 20+ hours I decided it was time to ask for help. m just Lynxing around the web at the moment =X
I have been trying to install Xubuntu 9.10 in an old desktop computer (Mobile AMD Duron, 213 Mb RAM) but the mouse doesn't work! Neither the Network connexion... When I boot with an USB (same OS) everything works fine... I can also boot with Puppy Linux (working in other partition) without any problem.
After booting up my pc, sometimes it loads, and then my mouse freezes and i am unable to do anything at all. keyboard doesnt work either. Causing me to do a restart. when starting my pc, i get the ubuntu splash screen and then it jumps to a black screen with: "desktop login" after i out in my log in it asks for the password, i put that in and get "Weclome to Ubuntu etc" (forgot all the words, but its some statement welcoming me to ubuntu. The i get "tim@tim-desktop: $" but this is all on a black screen. Only way to get past this is to reboot my pc. and then it loads properly.