CentOS 5 Hardware :: Installing 5.4 X86_64 On Intel Core I7?

Apr 28, 2010

I'm trying to setup CentOS 5.4 x86_64 on a new machine but am running into problems. The machine is: CPU: Intel Core i7-860 RAM: 4GiB DDR3 Motherboard: Intel DQ57TM When booting from the disc, I get to the initial splash screen but almost immediately after that, I get a kernel panic.

None of the lines leading up to it mean much to me so I'm not sure what to copy here but the last line says: <0>Kernel panic - not syncing: Fatal exception

View 14 Replies


ADVERTISEMENT

OpenSUSE Install :: Blank Screen After Installing On Core I3 (VGA Intel HD 4500)

May 8, 2010

I installed 11.2 on a Lenovo G460

CPU: Core i3
Graphic: Intel HD 4500

And I got a black screen. Installation media (DVD) is healthy.

View 1 Replies View Related

CentOS 5 Hardware :: Installing CentOS 5.4 X86_64 On Adaptec RAID 3405

Jan 13, 2010

My problem is that I'm trying to install CentOS 5.4 x86_64 DVD ISO on Supermicro X7SBI server with installed Adaptec RAID 3405 controller.

I created RAID 5 array and is working fine (adaptec status says Optimal) but I can't install CentOS to that array (1.5TB size).

Whenever I try to install with: linux dd

I'm asked for a driver, which I have downloaded from Adaptec site and extracted contents to USB drive (in installation found as /sba1) which has now a lot of IMG and some ISO files on it.

I try to load (I simplified names) RHEL5.img, CENTOS.img... with x64 names (one exact name: aacraid driverdisk-CentOS-x86_64.img) and I always get the error message: "No devices of the appropriate type were found on this driver disk"

This is going on for a week now and I can't find the right driver or something I'm doing wrong to get install done.

View 16 Replies View Related

OpenSUSE Hardware :: 11.3 On Intel Core I5 With Integrated Graphics + Intel H55 Express Chipset

Aug 18, 2010

! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...

I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...

View 8 Replies View Related

OpenSUSE Hardware :: Intel HD Graphics (Intel Core I3) With Suse 11.3 - Poor Resolution

Jan 2, 2011

I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :

Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....

View 9 Replies View Related

General :: Installing CentOS X86_64 On VMware Server Console

Feb 23, 2011

I am very new to this site. Is there a good tutorial on installing CentOS X86_64 on VMware Server Console?

View 2 Replies View Related

CentOS 5 :: Installing CentOS 5.3- X86_64 From DVD?

Aug 31, 2009

I have downloaded all files from [URL]... and burnt a DVD. How can I now install centOS 5.3 on my server/computer ?

View 4 Replies View Related

CentOS 5 :: Uninstalling / Installing With Rpm - Complains Package VMware-server-2.0.2-203138.x86_64 Is Already Installed

Feb 11, 2010

I installed VMware server on my CentOS 5 machine. I had problems getting that working. Then I installed VMware Workstation. That worked fine. Then I tried using VMware server, but apparently VMware Workstation deleted some of VMware Servers files. So, I uninstalled VMware Workstation. Then I tried to reinstall VMware Server, but rpm complains package VMware-server-2.0.2-203138.x86_64 is already installed

View 3 Replies View Related

Slackware :: Intel Wifi 4965 On 13.1 X86_64

Mar 18, 2011

I have just started with Slackware and I have a problem with my wifi. I don't know if I should make more changes to any archive but when I try to start my wifi it doesn't work at all. What I should do? take into consideration that I come from Ubunut, where everything is done beforehand.

View 6 Replies View Related

Ubuntu :: Which Kernel To Use W/ Intel Core 2 Duo

Aug 20, 2010

I've read that you can use specialized kernels for your hardware, and I was wondering if there's a kernel I can use for my Intel Core 2 duo. I read in a previous post about using a "smp" variant, but kinda wanted some confirmation. Here's CPU info:

Code:
processor : 0
vendor_id : GenuineIntel

[code]....

View 1 Replies View Related

Debian :: Starter Image For Intel Core 2 Duo?

Dec 14, 2010

Can someone tell me what the architecture of iMac Intel Core 2 Duo is? I am trying to figure out which of the following images given on the webpage below to download:[URL]..This is the list:

[alpha][amd64][arm][armel][hppa][i386][ia64][mips][mipsel][powerpc][sparc][s390][source][multi-arch]

I think there are two different images (namely i386 and ia64) for intel-based systems, right? Which one should I download for my Intel Core 2 Duo? Is this a 64-bit architecture? Should I use amd64?

View 10 Replies View Related

Debian :: ISO Selection For Intel Core I7 Processor

Aug 24, 2011

What is the best debian iso that I should choose to install in a machine with intel core i7 second gen processor? amd64,ia64 or i386 ?

View 4 Replies View Related

Fedora :: Does SMP Perform At Its Optimum In Intel Core I7?

Sep 19, 2009

This is a general technical question about Symmetric Multiprocessing in relation to the Intel Core i7. (Actually, it's more about Hyperthreading than i7.) My understanding is that Symmetric Multiprocessing means that the operating system treats all processors as identical, and therefore it can assign a new thread to any free processor.

And that i7 appears to the OS as 8 processors, 0 thru 7. But from a performance perspective, the 8 processors are not identical, because each core has 1 execution engine plus the ability to store the state of 2 threads. This is, as far as I understand it, the essence of Intel's Hyperthreading. So each execution engine can quickly switch between 2 threads without bothering the OS, but only one thread at a time actually executes.

Suppose, for example, all processors are idle and the OS assigns one thread to processor 0, then has a second thread to assign. Since all free processors are considered identical, the OS could assign the second thread to any free processor, say 1. The result would be that both threads are competing for the same execution engine, while the other 3 cores remain idle. Is my understanding of SMP correct?

If so, does linux SMP take full advantage of Intel Hyperthreading (which existed also in earlier Intel processors)? That is, does linux SMP assign threads in such a way that it attempts to choose an idle execution engine? I don't know what algorithm SMP actually uses to choose the processor. For example, it could be the first free processor, or any free processor chosen at random.How about Windows? How does it handle the situation?

Edit: I have also posted this question in linuxforums and phoronix forums. I hope this doesn't count as cross-posting, since those forums are not on this site and they have different readership. If it is indeed cross-posting, please let me know and I will avoid doing it in future.

View 2 Replies View Related

Hardware :: 32 Or 64 Bit - Which Architecture To Use With An Intel Core 2 Duo Processor

Mar 28, 2010

Which architecture to use with an Intel Core 2 Duo processor?

View 3 Replies View Related

General :: Which GNU Distro Is Best For The Hp G62 64bit I5 Intel Core CPU?

Dec 28, 2010

I have a new hp g62 notebook pc with intel core i5 m469 @ 2.53 GHz, 64 bit operating system. I wish to use GCC to develop for msp430's, arm7/9. Which distro would work best for this hardware?

View 2 Replies View Related

Debian Installation :: Designation For Intel Core I5 430M?

Aug 22, 2011

the appropriate debian designation that will work on an Intel Core i5 430 M processor.

View 2 Replies View Related

Debian :: Architecture For Intel Pentium D Dual Core?

Mar 8, 2010

I'm a Linux Mint user, but I'd like to cross over to Debian. I used the x86 architecture for the Mint install, but I couldn't find that anywhere on the Debian site. what the architecture for the Intel Pentium D dual core is?

View 2 Replies View Related

CentOS 5 Hardware :: Infiniband (mlx4) Works On 16-core System But (now) Fails On 32-core System

Jan 27, 2010

We have a small cluster of 20 HP systems, all running CentOS 5.3 in an NFS-root environment. Half are quad-socket, quad-core Xeon E7340 @ 2.40GHz (total 16 cores), the other half are 8-socket, quad-core Opteron 8354 (total 32 cores). All systems have a Mellanox Infiniband adapter ("Mellanox Technologies MT25418 [ConnectX VPI PCIe 2.0 2.5GT/s - IB DDR / 10GigE] (rev a0)")

With kernel 2.6.18-128.1.6.el5, infiniband works fine on all systems.

With the update to kernel 2.6.18-164.11.1.el5 (and both types of node running the same NFS-root image), the 16-core Xeons still work fine. Infiniband no longer works on the 32-core Opterons. Specifically, either the ib0 interface fails to appear, or it does appear but when configured with an IP address, doesn't actually work. In either case, loading the IB kernel modules takes a long time, but I haven't instrumented the load script yet to see which module, if any, is at fault. More errors listed below.

However, if I tweak the BIOS of the 32-core systems to reduce the per-socket core count to 2 (so effectively 8-socket, dual-core, down to a total of 16 available cores), Infiniband starts working again. Putting it back to 32-cores makes it fail. Booting the older kernel makes it work again. In summary: old kernel, IB works on all systems. Newer kernel, IB only works on 16-core systems.

Updating the IB firmware from 2.5.0 to 2.7.0 (latest available) doesn't help. I also did a full 'yum update' to make sure that libmlx4, openibd all other associated packages were up-to-date. Doesn't help either.

Some errors that appear on 32-core nodes:

ib_query_port failed (-16) for mlx4_0
ib_query_port failed (-16) for mlx4_0
mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16)
mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16)

[Code]....

View 5 Replies View Related

Debian Hardware :: CPU Frequency Scaling - On Dual Core Intel ?

Nov 3, 2010

I'm having a weird problem (2.6.32-2-686-bigmem , sid):

Frequency scaling works on CPU 1 but not on CPU 0.

This is regardless of application, the Gnome applet and cpufreq-selector both fail

View 4 Replies View Related

Debian Hardware :: Intel Core I3-330m High Temperature?

Jun 10, 2011

On my lenovo g560 i have Intel core i3-330m, i have both debian squeeze and windows 7 installed on my laptop.Today i noticed that while playing music (amarok) and playing a flash game (google chrome, game - tetris, lol (: ) the processor core temperature was around 70-71deg celsius.I restarted and booted windows 7, doing the same thing (music and tetris) the processor temperature is aournd 54-55deg celsius.Can anyone explain why the high temperature when running debian?

View 6 Replies View Related

Fedora Installation :: CD/DVD Boot On Intel Core 2 Duo VPro Stalls?

Jun 13, 2009

I've been using Linux (Fedora) since 2005 (when I happily abandoned Windows) and loved every minute of it. No installation or other unresolvable problems. But now, I am totally stuck. A month ago, they just gave me a new desktop in the office: Dell Optiplex 960 with the Intel Core 2 Duo vPro chip. So I waited for Fedora 11 to come out, burned the x86-64 Install Media on a DVD, repartitioned the hard drive like I always do on new Windoze machines, and began installing. The install process gets to this announcement and stops:

mounting /tmp as tmpfs... done Then, after a 5-minute wait, if I push the power button on the computer for a hard reboot, then it says:

running install running /sbin/loader and then stalls for good. Then all I can do is hard-reboot again.

So, out of curiosity (and for other reasons), I tried booting the machine from other linux disks: Knoppix, and SystemRescue (www.sysresccd.org). They all stall at different points. The funny thing is that both Fedora 11 x86-64 and SystemRescue happily boot on my personal one-year-old Lenovo T61 Intel Centrino Duo VPro laptop.

I get a feeling that somehow the Intel Core 2 Duo vPro is causing the problem. I also think that there is got to be someone else out there who either had this problem, or was able to install F11 on similar Dell box. Google search did not produce actionalbe answers for me.

View 3 Replies View Related

Fedora Hardware :: Athlon X2 Vs Intel Core 2 Duo - How's The X2 In Terms Of Compatibility With F12

Mar 8, 2010

How's the X2 in terms of compatibility with F12. I see some deals that tempt me to pick up a cheap small desktop and those desktops use that AMD chip (along side an ATI Radeon) I prefer sticking with intel and maybe build my own, but I am curious about how AMD holds up in performance and/or compatibility with Fedora

View 3 Replies View Related

OpenSUSE Hardware :: Driver For Intel Core I3 Integrated Graphics?

Nov 25, 2010

As this seems not yet to be covered in openSUSE Graphic Card Practical Theory Guide for Users I am asking here.

The Motherboard is an Asus P7H55-M Pro with Intel Core i3 530@2.93GHz. openSUSE 11.3 assigns the i915 driver by default:

Code:
# lspci -vk
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 8383
Flags: bus master, fast devsel, latency 0, IRQ 30
code....

View 9 Replies View Related

General :: Ubuntu - Overclocking Tools For Intel Core Duo 6600e

Sep 16, 2010

Do you know something to overclock my procesor with temperature sensor on linux?

View 1 Replies View Related

Ubuntu Installation :: Will 64-bits Work With An Intel Core 2 Quad

Mar 16, 2011

I'm going to do a fresh instalation, I have an Intel Core 2 Quad, so I'm tring to get the 64-version from [url]but the file says "amd64", will this work for me?

View 2 Replies View Related

Fedora Hardware :: Support For Intel Arrandale/Calpella (Core I3/i5) Laptops?

Jan 17, 2010

I was using Fedora 11 on my previous laptop, a Toshiba Centrino 2-powered model, and I was having issues with the CPU fan not starting up unless I put it to sleep and woke it up again. I no longer have it due to circumstances beyond my control (aka getting mugged), and I'm looking into getting one of Dell's Core i5-powered Inspiron laptops.

On the odd chance that some people here have gotten their hands on one, I was wondering if there's any support for Core i3/i5-powered laptops in Fedora 11, or should I wait for Fedora 12 before I get one? I almost burnt up the Centrino 2 one before I remembered about the fan problem, and I want to avoid that if possible.

View 7 Replies View Related

OpenSUSE Hardware :: Gigabyte GA-P55-UD3L Motherboard And An Intel Core I5 750 Processor

Dec 26, 2009

I'm about to upgrade a server for a local non-profit, and am looking at a Gigabyte GA-P55-UD3L motherboard and an Intel Core i5 750 processor. Does anyone have any observations or experiences with SUSE on this platform?

View 7 Replies View Related

OpenSUSE Install :: Unable To Use Core I3 Intel Clarkdale Graphic Controller

May 22, 2010

I own a MB with H55 Chipset and a Core i3 540 with openSuse 11.2.I tried kernel 2.6.32 and 2.6.34 and the newest Xorg delete the xorg.conf and got a fine picture on the screen (same with xorg.conf and device "intel") Even HD MKV is possible. But in KDE I can only open one programm. If I try to open a second programm the desktop disappear and I get the KDM screen and have to login again and the former started programm is gone. Only if I start the programms via an open Terminal window the programms will run. I tried to delete all .kde(x) directories, but it�s the same after restart.Only if I use driver "fbdev" in the xorg.conf I get no problem. But then the screen is very slow.

Code:

hwinfo --gfx
09: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_42

[code].....

View 7 Replies View Related

Ubuntu Multimedia :: Upgrade To An Acer Revo R3610 Dual Core Intel Atom 1?

Dec 14, 2010

I have a question that has been partially answered in other posts and forums but I am still unclear. Please can someone help me out? I was previously using an Intel Atom 1.6GHz, 1GB RAM and the onboard Intel graphics adaptor for use as a media center PC. This was running Lubuntu and I could use Flash at full screen without any issues.

I have since decided to upgrade to an Acer Revo R3610 (Dual core Intel Atom 1.6GHz, 4GB RAM, Corsair SSD and Nvidia ION grpahics). I thought that as this machine was more powerful than my previous one, I could get away with ditching Lununtu and go for Ubuntu 10.10 (x86).

I have updated the machine and installed the latest Nvidia drivers. When I browse to a Flash based site all runs fine until I go to full screen then I get about 10FPS (sound remains fine). The video is unwatchable. I rebuilt the machine using Windows 7 Ultimate (x86) and tested again. Under Windows the video plays perfectly.

I have also tried using the 10.2 beta version of Flash under Ubuntu and this gives the same terrible results. I am at a loss as to where the issue lies. Is it with Nvidia's driver, Adobe's Flash under Linux or is it my Ubuntu build?

View 9 Replies View Related

CentOS 5 :: Centos 5.5 X86_64 Or Centos 5.5 I386 - Difference Between The Two Versions?

Feb 9, 2011

I am in the process of building a new server on an Asus P5QPL-AM motherboard and an Intel E8600 processor.explain to me the difference between the two versions and what would you recommend.Also, is there any advantage of SATA over IDE hard drives?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved