CentOS 5 Hardware :: Installation CentOS 5.2 On Intel DG41TY?
Mar 18, 2009
I installed centos 5.1 in my system, it installed perfectly, but when I am trying to install centos 5.2 then it is not let me install.
My system has 220 SATA HardDisk Intel Core 2 Duo 4 GB RAM Intel Desktop Board DG41TY when I try to install centos 5.2, it show me menu bar After hit enter key to install centos 5.2, it show me loading usb drive and then showing some strange font. System is hang after this Can you please tell how I install centos 5.2
I have been able to load CentOS on my computer. I have the motherboard DG41TY from Intel. It seems that the only problem I have is my network card does not work. On the Intel site there is a link to download the network driver for Linux. I did that. It's an rpm file. realtek-r8169-kmp-default-8.004.00_184.108.40.206_0.21-0.i586.rpm is the name. When i right click and say install it tried to connect to the internet for some thing and fails. of coarse it does there not loaded yet. I added a second nic that cent did recognize and got me online. I want to load the on board driver and remove the add on card. When I try to load now I get missing dependencys.
I have a DG41TY which has a "Intel Graphics Media Accelerator X4500 integrated graphics subsystem" graphics onboard card connected to a Benq Fp731 (old LCD flat screen).
While installing Fedora 10, screen hung at the first welcome page, only mouse movement, no Ctrl F2-6 terminal access. I then tried vga=vesa (and other 791 787 options), lowres on the grub options. Did not help. Same results. Then I tried text install, installed system-config-display and tried all the steps (inittab to 5) on [URL]. No help, it hangs on the login screen. On system-config-display I tried using Intel Integrated Graphics, did not work. Same results.
I need to try to install using text, then install the [URL] mentioned on [URL]
I've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
I have an intel DP35DP motherboard - ICH9 southbridge - set to AHCI mode. Working fine under 5.2. Yesterday I updated to centos 5.3, and got kernel 2.6.18-128.1.16 and now it can't boot. It hangs trying to read sata1 with DRDY errors and exceptions.So then I installed 5.3 from a DVD onto a new drive, and got kernel 2.6.18-128. This worked, most of the time, but occasionally gave me this error. I then updated my BIOS, and the error went away.Then I updated this new working drive to the latest kernel (yum update again) and got kernel 2.6.18-128.1.16, and now it wont boot again, with the same message.
I've a Centos 5.1 server on S5000vsa Intel board with 6 bay HD in raid 1 mode (2 HD), and working fine until I've decide to make a yum update. Today the Centos is 5.4 but seems necesssary to upgrade the megasr driver for the raid function (i.e. , is not possible to contact the raid firmware trought Web Console 2). I've download the last megasr driver from Intel and I follow the instruction to upgrade the driver with s.o. installed, but when I start the server and choose via grub the new img boot file, the display show :
megasr.ko invalid module format -1 and stop. The linux version is the same in the machine (uname -a) and from the driver (2.6.18-164.9.1.el5). Another question : in Intel instruction spoken about megasr.o , but on img file I found a megasr.ko . I think instructions referre to old linux 2.4
i want to change my server to a intel d510mo withoutchanging the installation.The old nstallation runs on a centos 5.4 asus amd board witha sata raid, sata-sil adapter in no raid modus.and that is the problem.i boot the centos on the intel board, and only the sata-sil module is loaded, so noata drive is found.How can i change this? udev? i disabled the scsi-hostadapter in modprobe.conf, but no
i try to install centos on server with MB SuperMicro(X7DCL-i) [URL] But centos don't see my hard drives. In any mode(raid intel, raid adaptec, without raid), it's always tell me No driver found. Unable to find any devices of the type needed fot this instalation type....
This Motherboard have 2 type of raid. Intel ICH9R raid or Adaptec embedded raid
I download driver ICH9 RAID/AHCI driver (Provided by Adaptec) for Redhat Enterprise Linux 5 (32 Bit) from [URL], but after loading driver, it's do not see drives too.
Problems with xen 3.1.2 creating and installing domU CentOS 5.5 I am trying to do a virt-install --prompt --paravirt, and the install error out while trying to download install RPMs. I have googled for xen centos virt-install and various permutations. I have found similar howtos for 5.4 and 5.3, but they resulted in the same outcome. I did find several posts with similar issues, but no solution was posted.[URL]..
I am having a hardware problem with my samba server. It is on an Tyan AMD motherboard, (Tyan S2469), and it appears the board has gone bad. Is it possible to transfer the drives onto my Tyan S2735 mother board without a complete reinstall? I really need to save the data on the system.
Quote:toracat wrote:Quote:Reason for custom build is the need to disable ieee80211 and ipw2200 pre-built module in kernel. Trying to get wireless working, and I want to use the later versions of these modules in the hope to get wireless working.
inter x5405 cpu , centos5.4 x64 , qemu kvm ,kvm setup win2003x64 os, kvm show a qemu virtual cpu,but i will install some software need intel cpu ,it is show need amd/other file support. can i config it as a inter cpu?
in order to using the SR-IOV, according the guide HOW_SRIOV [Moderator edit: fixed link.]but i can't got the VFs.so i try to compile the driver :igb-2.4.13 and igbvf1.0.7.but i failed to install them.when i make install the igb-2.4.13 i got the errormsg:root@localhost src]# make installakefile:106: *** Linux kernel source not configured - missing version header file‚[root@localhost src]# i alreadly installed the kernel-headers-2.6.18-194.32.1.el5.x86_64.rpm .some system info maybe needed:Information for general problems.
== BEGIN uname -rmi == 2.6.18-164.el5 x86_64 x86_64 == END uname -rmi ==
I am trying to install CentOS 5.2, and the installation ran out of disk space after running for about 2 hours.I checked the FAQ, and it said 1.2 GB. The disk is 3 GB. The default install was selected, and I think that it checks for sufficient available disk space before installing. Still, it ran for quite a while before announcing that it was out of disk space.The Installation Guide is not very helpful, since there is a blank page where the disk space requirement is supposed to be. I just picked the default installation. A search of the forums on "not enough disk space" did not return much.
i am trying to install centos 5.5 x86_64 as a guest OS in vmware server 2.0.2 using netinstall iso. Installation runs fine until the point, when it tries to install selinux-policy-targeted-2.4.6-279.el5.noarch, the whole virtual pc hangs at this.any ideas? i tried to google few things about this, but i have found nothing. this has happened 3 times in row, whole virtual pc always hangs at the same package. i dont have any other problems with vmware, gentoo runs and installs fine in it.i would prefer to do installation using netinstall.iso, it would take a lot of time to download all cds or whole dvd and all i require is a very basic set of packages.
I am trying to install Centos 5.6 on a motherboard with a built in Marvel 88SE61xx drive controller.NO drive arrays are configured using the Marvel BIOS configuration utility.During the install CENTOS displays loading MARVEL_PATA driver and it waits and waits and waits.Looking on one of the system message screens I get the following types of messages:qc timeoutfailed to identifyI/O errorLink is slow to respondSRST failed errno=16ata4: reset failed - giving upAny ideas as to how to get CENTOS to recognize the drives connected to the motherboard Marvell controller on a NON-RAID configuration?
3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
I am trying to clone the hard drive to a slightly smaller hard drive in the same computer, same setup.What software or commands do you use to clone the entire system and resize the partition automatically?The original HD is a little larger than the destination HD. The source partition only has about 20 GB in use and the rest is blank.
I have 2 partition, a small 100MB boot partition and another 500GB LVM partition.I can't just clone from the original disk to the new disk. (for another long reason) I need to make an image of the original disk on an external USB drive first, then move that image onto a new disk.I have tried creating an image of the whole disk with Clonezilla, but then the restoration didn't work because the target drive is smaller than the original.
I just came to know that we can also use HP MC Servicegaurd for clustering in Linux environment too. I did some google but could not found much info about the packages and all. Can I use HP MC Servicegaurd with RHEL/CentOS on 32 Bit Linux on Intel Machines? Is the rpm (or tar ball) of HP MC Servicegaurd freely available? I just wanted to use it for learning purpose.
is it possible to run xen on intel atom or celeron for learning purposes, as when i start the virt-manager it doesn't give me the new option the file menu and when i try to do xm create domain1 it gives error like try running it with config file
if atom/celeorn can't run xen why does it gets installed on the system.
I'm trying to setup CentOS 5.4 x86_64 on a new machine but am running into problems. The machine is: CPU: Intel Core i7-860 RAM: 4GiB DDR3 Motherboard: Intel DQ57TM When booting from the disc, I get to the initial splash screen but almost immediately after that, I get a kernel panic.
None of the lines leading up to it mean much to me so I'm not sure what to copy here but the last line says: <0>Kernel panic - not syncing: Fatal exception