CentOS 5 :: Any Known Errors On Allocating Disk Space Using Rsync?

Mar 13, 2009

Need to know if there are any known errors allocating disk space using rsync. I have recently setup a small file backup server (2 500GB drives) running Centos 5.2, with a rsync daemon (via xinetd). However I have noticed that after about a week of usage, if I reboot, then the disk that rsync uses, has a lot of multiply claimed blocks and inode errors, such that I have to run fsck multiple times to fix. This has happened a couple of times now so I don't think that its random.

View 11 Replies


ADVERTISEMENT

Ubuntu :: 10.10 - Disk Errors (Insufficient Space)

Jun 21, 2011

I'm currently running ubuntu 10.10 64bit. My problem started occurring a couple days ago. When I check my disk space using either disk usage analyzer or Gparted it says I have about 69 gigs left. But say I am in a folder on the bottom of the window it will tell me I only have 48 gigs. And just to test I tried going over the amount specified in the folder window and it tells me I have insufficient space.

View 6 Replies View Related

Ubuntu :: Allocating Free Space To Existing Harddrive Went Wrong?

May 28, 2011

I tried using livecd 104 to allocate some free space to the harddrive that contains the files and the os 104

here is the gparted output:
http://pastebin.com/aZnH1m21

what should I do now? reboot? Is the data lost?

View 1 Replies View Related

Red Hat / Fedora :: Extending Primary Partition - Allocating Space To SDA1

Jun 27, 2010

I have installed oracle enterprise linux on VM ware with 20 gb allocated to guest OS. Now I want to install oracle apps in the guest Os, so I need to extend the volume. I have extended in Vm , but I have to partition in the guest OS, for that purpose I am using Gparted. But I am unable to extend to sda1. I need to have all the unallocation space allocated to sda1. Here is the screen shot, how can I do that. Right now when in press the command df -h in terminal I am gettig 18 gb as space available for sda1, I want to make it 200 gb, in which I would like to install oracle apps. Check out my screen shot.

View 5 Replies View Related

CentOS 5 :: Install CentOS 5.2, And The Installation Ran Out Of Disk Space After Running For About 2 Hours?

Feb 18, 2010

I am trying to install CentOS 5.2, and the installation ran out of disk space after running for about 2 hours.I checked the FAQ, and it said 1.2 GB. The disk is 3 GB. The default install was selected, and I think that it checks for sufficient available disk space before installing. Still, it ran for quite a while before announcing that it was out of disk space.The Installation Guide is not very helpful, since there is a blank page where the disk space requirement is supposed to be. I just picked the default installation. A search of the forums on "not enough disk space" did not return much.

View 13 Replies View Related

General :: CentOS 5 - Available Disk Space Always 0 Percent

Jun 16, 2011

I am running centos 5. So far, it gives no problem but just yesterday, when it reported "no free space" for file writing, I try to remove some file as usual. Unfortunately this time no matter how much files I had deleted, it just keep showing no available space for doing so.

Result from df:
[root@LSMSVR ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
1.2G 269M 879M 24% /
/dev/hda6 4.8G 138M 4.4G 4% /tmp
/dev/hda5 19G 2.4G 16G 14% /usr
/dev/hda3 48G 12G 34G 25% /var
/dev/hda2 379G 365G 0 100% /home
/dev/hda1 99M 15M 80M 16% /boot
tmpfs 180M 0 180M 0% /dev/shm
ow to recover the lost space in /home?

View 2 Replies View Related

CentOS 5 :: How Many Space Does A Plan C5.4 Take On Hard Disk

Dec 29, 2009

Can some one tell me how many space does a plan CentOS 5.4 take and the minium size of the memory.
Also, what is the minium size I have to partition on /boot

View 1 Replies View Related

CentOS 5 :: Increased Disk Space Not Reflected

May 11, 2011

I am running Centos 5.5 in vmware and recently had to increase my disk space from 20GB to 40GB. I understand that in linux, the increased disk space is not automatically reflected but as I am new to this topic, I am not sure how I can go about doing this. how to see what's the available space and how I can partition(?) this.

For your reference:

[root@localhost ~]# fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[Code].....

View 2 Replies View Related

CentOS 5 :: Resizing Software-RAID Disk Space On 5.5?

Mar 13, 2011

I have a dedicated server that has CentOS 5.5 installed.. I can access that server via SSH as root. Now the issue is.. httpdocs folder is situated in /var where all website data is stored. I have more than 50GB of website that needs to be transfered to this partition but this partition is of 4.0GB..

# cat /etc/fstab
/dev/md1 / ext3 defaults 1 1
/dev/sda2 none swap sw
/dev/sdb2 none swap sw

[code]...

View 2 Replies View Related

CentOS 5 :: Df Not Showing Disk Space After Logical Volume Expansion / Fix It?

Jun 5, 2009

I've added a new LUN to my Centos 5.2 server using Powerpath and have added it to an ext3 logical volume. I extended the logical volume using lvextend and the new space shows up correctly in lvdisplay. What I'm having problems with is getting Centos to see the new disk space (df -h shows 500GB, not 600GB as expected). I've tried running a resize2fs on the new volume but it tells me that "the filesystem is already n blocks long. Nothing to do". Does any one know where I'm going wrong? If possible I'd like to sort this without a reboot.

View 3 Replies View Related

CentOS 5 :: Part Of The Disk Space Is Unavailable: Only 37 GB Out Of 80GB Is Accessible?

Dec 26, 2009

A part of the disk space is unavailable: Only 37 GB out of 80GB is accessible A part of the disk space is unavailable: Only 37 GB out of 80GB is accessible. I have a vmware instance of CentOS setup with 80GB of Hard Disk space ( Preallocated). When I login to the system I only see 35 GB.

[Code]...

View 1 Replies View Related

CentOS 5 :: Adding Disk Space On System Based On VM Ware?

Sep 30, 2010

I have install Cent OS 5.5 on VM Ware ESXi 4. I have added new hard disk of 100 GB Disk space to same VM Ware instance.

How do I initialize that volume so I can see it on Linux server and use it.

View 3 Replies View Related

CentOS 5 :: Nagios - Checking Remote Host For Disk Space?

Nov 22, 2010

I'm trying to setup my test nagios to check the disk space of another linux box. I've got it setup and checking. But to my surprise, it was checking the nagios server's local disk space instead of the remote linux.

Here is my services.cfg.

define service{
use basic-service
name disk-space
check_command check_local_disk!20%!10%! /

[Code].....

View 10 Replies View Related

CentOS 5 Server :: How To Enlarge Space Of Disk Without Re-install Operative System

Dec 5, 2009

I have a server with centos 5, with two hd, i did a fresh installation with cenTOS using the 2 hard disk, now we need enlarge with other hard disk more, can some one explain how to enlarge the space of disk without re-install the operative system?.

View 1 Replies View Related

General :: Why Is Used + Available Disk Space Always Less Than Total Disk Space

Feb 24, 2011

root@localhost:~ $ df /dev/sdb1
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sdb1 1922858352 23247088 1801935664 2% /mnt/external/sdb1

[code]....

View 1 Replies View Related

Slackware :: Disk Space Lost- Root Partition Has Very Little Space Left

Jan 31, 2010

Today I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.

Here is the output of df -h:


Code:

As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?

If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(

In case you're curious, here's my /etc/fstab:

Code:

View 14 Replies View Related

Ubuntu :: Rsync Errors From Nonexistent Drive?

Feb 3, 2011

I am trying to backup my ~ directory to a portable drive. In the meantime rsync is giving me all kinds of messages like this:

[Code]...

This drive is neither plugged into my computer nor is it involved with my backup script:rsync $base_options -narv /home/noleks /media/Personal1/Linux_bak. I think the question is, does rsync have a queue somewhere of operations it did not complete? If so is there a way to rest this? It is possible something went awry with a previous sync on this drive but I cannot remember right now. Either way why is it trying to complete that sync when I'm asking it to do something else?

View 2 Replies View Related

General :: Still Having Rsync Errors To External Drive?

Jan 18, 2010

anyone shed some light into these errors I keep getting for multiple files when I run rsync in verbose mode to a FAT32 external hard drive?

rsync: stat "/mnt/usbdrive/Batch 2/od venezuelan" failed: No such file or directory (2)
rsync: recv_generator: mkdir "/mnt/usbdrive/Batch 2/joseph gangster" failed: No space left on device (28)

I have 588GB available on my external hard drive, and i'm only trying to rsync 200GB to it, so its not out of space or anything like that. I've tried rsync with -r -t --size-only --delete and -r -t --modify-window=1 --delete and both ways seem to give me the message. or should i just reformat as NFTS and start over? i already had another 200GB data set copied on here, was trying to add a second. its all JPG pictures.

View 14 Replies View Related

General :: Rsync Showing Unocode Errors?

Apr 29, 2010

I am getting this error while using rsync

Quote:

Could not convert filename to Unicode: 'H20 dinkus_.pdf': Invalid or incomplete multibyte or wide character
Could not convert filename to Unicode: 'ANT0012 H20 Brochure_OFFSET_paths_.pdf': Invalid or incomplete multibyte or wide character ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument

Quote:
file has vanished: "/media/sputold_server/2007 Archive/Icon?" file has vanished: "/media/sputold_server/2007 Archive/Resources/stage 1/images/resources/5yr stamp?1.tif"

WHat should i do. How can i delete the files which are on receiver but not on main server

View 3 Replies View Related

Hardware :: Reduced Disk Space / Use The Total Amount Of Space?

Aug 25, 2009

OS: RHEL AS 5 64-bit

HDD:300 GB Hardware mirror (HP blade bl460c)

While installing OS, in partition window after OS file system structure I've left 277 GB. But after installation it shows Size - 255GB and available disk space is 242 GB.

Isn't it weired? How can I use the total amount of space in Linux? I need the whole 277GB exactly. What should be my workaround?

View 6 Replies View Related

Ubuntu :: 5,149,552 Files In 30.2 GB And RSYNC Out Of Space?

Jun 9, 2011

I am running Ubuntu 10.04. I am transferring roughly 62 GB of data libraries to my 84 GB /home partition. I'm using rsync because scp kept stalling, and I had to restart it over and over. Things were going great until recently when it began to show an error: "failed: No space left on device (28)" These are the things I've done so far: Used the GUI to find out how much I have copied so far: 5,149,552 which take up 30.2 GB. df -h, it tells me that my /home partition is 56% used, and that I have 33 GB available. (42 GB used out of 78 GB with 33 GB available) Also, none of my other partitions are anywhere near 100%. the /home partition is the most-used and it's only a little over half-full. du -s in the directory where I'm copying all of this: it also returned 42206500. Additionally, when I try to save screen captures, it sometimes fails with a "device full" error. What's going on? Am I really out of space? Why doesn't it show me that I'm out of space?

Is there a hidden temp file that rsync uses that just got too full? I did a little research on wikipedia and it said that ext4 has a 64,000 directory limit. Could it be that I somehow broke that limit with all of these files? Solution: not enough inodes for the vast amount of subdirectories on hard drive. This wasn't an RSYNC problem, rather, a partition configuration issue. To check inode usage: df -i If you want to add any inodes, you will need to backup your partition and format it using mke2fs (man mke2fs). Be sure to change the respective inode setting.

View 9 Replies View Related

Ubuntu :: Disk Errors: SMART Status: Disk Is Being Used Outside Design Parameters?

May 19, 2010

Just did a fresh install of Lucid on my new SSD and got this:

View 9 Replies View Related

Ubuntu :: "No Space Left On HD" Errors Despite 2.2G Free Space?

Jul 2, 2010

I just tried to download a torrent and got an error message indicating there was no space left in the download location I'd specified.

This happened earlier when df -h showed ~900M of free space. Just now, I'm showing ~2.2G of free space. Anyone have ideas what could be causing this?

View 9 Replies View Related

Debian :: Rsync Errors W/ Grsync -- Input/output Error (5)?

May 26, 2011

I've been using grsync to backup my home directory to an external drive (connected via USB), but lately I've been getting errors very early in the process and I was hoping someone might be able to help me fix them (or at least understand what I'm doing wrong).

Here's the output of a window titled "rsync: stopped" and in red "completed with errors!"
rsync: write failed on "/media/LaCie/myhomefolder/.cache/champlain/osm-mapnik/6/12/23.png": Input/output error (5)
kyconway/.cache/champlain/osm-mapnik/6/12/26.png
rsync error: error in file IO (code 11) at receiver.c(322) [receiver=3.0.8]
rsync: connection unexpectedly closed (486 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.8]
Rsync process exit status: 12

View 4 Replies View Related

General :: Files Seem To Take Up More Space In Destination After Rsync Copy?

Feb 9, 2010

I have recently purchased an external hard drive in order to backup my home partition. In my PC I have a "1.5T" drive with several partitions on it, containing OSes and the home partition. The home partition is 1.3T according to df, the external drive contains one partition that spans the entire disk,df reports it as 1.4T in size. Both partitions are ext3. When I use rsync to copy files from the home partition to the external partition, the external disk becomes full, despite the destination - supposedly - being larger than the source. I don't understand why copying files from one partition to a slightly bigger partition should need more space than on the source partition. Does anyone know what is happening ?

Details : I created the partition on the external drive with gparted; gparted reported it the already have several gigabytes in used space immediately after the partitions creation - I thought at the time that this must be normal. The home partition contains many files of all sorts, including lots of big audio and video files. If you are wondering, for all my important files this external disk is only secondary backup, as they are also backed up to the "internet".

These are the mount points :

/mnt/tmp/ : home partition, /dev/sdb6
/mnt/external/ : external partition, /dev/sdc1

I used rsync to copy the files, I know there are more efficient ways to do this, but I wanted to use the same command that I will subsequently run to sync the backup.

rsync -av --progress --stats --recursive --perms --links --delete /mnt/tmp/ /mnt/external/

Next I tried adding the --sparse switch, as I was wondering if the problem may come form sparse files. I don't know however if rsync would go back and shrink the sparse file by just adding the switch and executing the command. I also added --one-file-system, for good measure. Here is what I ran next :

rsync -av --progress --stats --sparse --one-file-system --recursive --perms --links --delete /mnt/tmp/ /mnt/external/

I tried an fsck on the home partition :

fsck -f /dev/sdb6

This is the output from the last rsync :

rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32)
rsync: write failed on "abcd.avi": No space left on device (28)
rsync error: error in file IO (code 11) at receiver.c(302) [receiver=3.0.6]

[code]....

Looking at the destination after a partial copy seems to indicate that the problem is not symbolic links being "expanded". I have not checked the source filesystem for sparse files, nor the destination to see if these files could be larger there, as this does not seem trivial.

Here is some additional info :

$ df /mnt/tmp/
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sdb6 1415342836 1414173740 369096 100% /mnt/tmp

[code]....

View 2 Replies View Related

Ubuntu :: Disk Space Used Doesn't Match What Is Shown In Disk Usage Analyzer?

Feb 26, 2011

Some thing is using up a huge amount of my disk space about 10G and I can not determine what it is. When I look at my disk usage in system monitor it say I have used about 25G and when I scan the directory in disk usage analyzer the entire file system used is 15G.

View 1 Replies View Related

Ubuntu :: Add Hard Disk Expand Disk Space For /home

May 23, 2010

ran out of space in my /home dir. Have a second hard drive to install and would like to designate it as additional space for /home. I do not want to mount it as a dir inside my home I would like it to simply work as though my /home simply has more space available to it.

View 1 Replies View Related

Ubuntu :: Disk Full - Can't Free Any Disk Space

Jan 2, 2010

I'm running mythbuntu 9.04 and am having an issue with disk space.

I try 'rm' various log files but the space I free up lasts less than a minute before the disk reports as being full once more.

df -Th | sort gives:

Quote:

/dev/sda1 ext3 8.3G 7.9G 0 100% /
/dev/sda6 ext3 138G 125G 6.3G 96% /music
/dev/sda7 xfs 783G 617G 167G 79% /videos
/dev/sdb2 xfs 344G 242G 103G 71% /recordings

[Code]....

There's nothing enormous in /var/log and my trash and the root trash are empty.

why size and used fields are not the same despite 100% usage being reported on sda1..

View 7 Replies View Related

General :: Disk Utility And Df Show Different Disk Space ?

Nov 18, 2010

I don't understand disk sizes in Linux. I have a 500GB drive. It's ext4. I have run "tune2fs -m 0" on it to reserve the amount of space reserved for root to 0.

I'm using Ubuntu 10.04 that comes with a Disk Utility. When I run "System->Administration->Disk Utility (palimpsest)" the disk shows up as 500GB (see picture). But when I run df -h it shows up as 459GB. So, I don't understand the discrepancy.

When I run df I get the following:

Question: Why is Disk Utility showing me something different than "df"?

View 6 Replies View Related

Ubuntu :: No Space Left On Device Errors

Mar 16, 2010

I recently upgraded from Lucid to Maverick, which went fairly smooth. Then I upped my RAM with some new memory sticks (4Gb to 8Gb). Since about then, I'm seeing these errors in syslog:

Code:
Jun 6 22:23:52 howler console-kit-daemon[1224]: WARNING: Failed to add monitor on '/dev/tty2': No space left on device
Jun 6 22:23:59 howler console-kit-daemon[1224]: WARNING: Failed to add monitor on '/dev/pts/0': No space left on device
I also get errors when running "tail -f" as root:

Code:
tail: cannot watch `/var/log/syslog': No space left on device

I searched around and I found some other reports of the tail -f error, with the suggestion of increasing fs.inotify.max_user_watches. I set it to 16384, and that at first resolved the tail -f problem, but now I'm getting that error again even after upping max_user_watches.

I know swap is suggested to be approx. the same size as RAM, but with this upgrade RAM is now bigger than the 5.7G of swap.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved