CentOS 5 :: Added Gnome And X To Command Line Only Install - How To Make X Start At Boot

Nov 5, 2009

I've got an install of CentOS 5.3 in a VM which was installed without X or Gnome.I've added X (yum groupinstall 'X Window System') and Gnome (yum groupinstall 'GNOME Desktop Environment) and can now run startx no problem.However on boot I get a command line login rather than the graphical login screen one normally gets if Gnome is included at install time.What do I need to do to get the graphical login after boot?

View 3 Replies


ADVERTISEMENT

CentOS 5 :: Get Command Line But No GNOME On 5.6 New Install?

May 3, 2011

It's a new install on a laptop, it looks like it installs fine, however after a boot I get login & password prompt and command line. I did choose GNOME desktop during the install.I know I will have problems to get 1080p resolution with my Intel integrated card Ironlake but at least I expect to have GNOME with min resolution 800x600.

View 5 Replies View Related

OpenSUSE :: Invoking The Gnome Start Menu From The Command Line?

Jun 28, 2010

I'm wanting to be able to run the Open Suse start menu from the command line.king remotely, I have found that I have faster response time by only running specific X components instead of an entire desktop (particularly useful under Windows 7 Cygwin). Specifically, I'd like to invoke the start menu from a ssh command line.On Linux Mint,line command is:mintmenuWhat is the equivalent command to bring up the Slab Start Menu on Open Suse?

View 8 Replies View Related

CentOS 5 Networking :: Unable To Start Eth1 From The Command Line?

May 28, 2009

I am trying to attach my server to 2 diferent networks, with fixed ip addresses,
eth0 = 192.168.0.2 255.255.255.0 with gateway 192.168.0.1. This is currently working, and I can ssh o the machine on this address

eth1 = 192.168.150.5 255.255.255.0 with gateway 192.168.150.1

When I try and start eth1 with ifconfig eth1 up, I get the error message "eth1: unknown interface: no such device"

I have configured eth1 using system-config-network-tui and /etc/sysconfig/networking/devices/ifcfg-eth1 looks correct

GATEWAY=192.168.150.1
TYPE=Ethernet
DEVICE=eth1
BOOTPROTO=none

[Code].....

View 2 Replies View Related

Ubuntu :: How To Make Command Line Auto Run On Boot Up

Dec 20, 2010

In dealing with the Nvidia Powermizer, I have to set it to "Prefer Maximum Power" mode from adaptive mode in order that I can avoid laggy in using my GUI. However, it doesn't save this setting so I have to manually tweak it everytime........

Someone on the web taught me to use the following command line:
nvidia-settings -a [gpu:0]/GPUPowerMizerMode=1
running it in the terminal it will set to the mode I want.

Would I be able to make my computer run the above command in terminal everytime it starts? I tried to put the command in the start up applications and it seems not working.

View 5 Replies View Related

CentOS 5 :: Can't Find The Start Command For Gnome From Terminal

Jan 11, 2010

I can't find the start command for Gnome from Terminal.

I tried:

start gnome
startx
start gne

Nothin is matching. In the Documenation is no help from console.

View 7 Replies View Related

Ubuntu :: Unable To Find Any List Of Arguments That Can Be Added In The Command Line

Aug 23, 2010

I am able to start up firefox just fine out of my terminal, but i have not been able to find any list of arguments that can be added in the command line. what i'm looking for is that it starts up in Full Screen mode right off. is there an argument that can be added to ti to do that?

View 2 Replies View Related

General :: Install Gnome From Command Line On Red Hat?

May 12, 2010

I am trying to install gnome from command line on red hat

View 2 Replies View Related

OpenSUSE Install :: Start / Stop KDE From Command Line (Terminal)?

Jul 10, 2011

How to stop/start KDE from the command line (Terminal) on opensuse 11.4?

View 9 Replies View Related

OpenSUSE Install :: LVM - Can't Boot Into X Window - Only GRUB Command Line During Boot

Nov 4, 2010

Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.

View 5 Replies View Related

Software :: Install On Centos From Command Line?

Mar 26, 2010

How to install software on centos from command line?

View 8 Replies View Related

CentOS 5 :: How To Install Command Line Instead Of Desktop

Jul 27, 2010

Just got the new Dual Quad Server and after the installation was completed, It was the destkop edition... Can I get a reference on how to install the "Command Line Only" version of CentOS, OR Can I run the desktop edition and still be able to host VPS's and Web Servers, etc...

View 3 Replies View Related

OpenSUSE Install :: Any Substancial Difference Between Gnome Terminal Or Hitting 'c' To Bring Up Command Line

Feb 25, 2010

so the safest way to go about this is to assume I know nothing. I mean, I have a rough Idea of what a kernel is, no idea what a shell is, etc. I do consider myself computer savvy, but know NOTHING about linux and thats why I'm Diving in, hopefully not too much, this is just to give you an idea of what we're working with here.

After several install attempts I kept getting a blank screen. Whether it be black,white, or the default gnome desktop (without any icons, and simple things like ctrl+alt+backspace just doesn't work, or anything else for that matter) I was ending up with a blank screen. Driver for moniter....maybe....but I did succesfully install it once, and it worked like a charm...shutdown properly, and the next day after work...Boom, same thing after startup.today I started from scratch and re-installed....samething, until I hit the power button, went from the dvd(iso) and did a fail safe, now my resolution is much better than it was the first time..Actual questions.....what did I do to fix it when failsafe never worked before?

Is there a way to save these settings, so I don't run into the problem again, because I don't even want to turn of my computer at this point?If i'm trying to dive in and learn the command line actions, is there any substancial difference between gnome terminal or hitting "c" to bring up the command line?

View 9 Replies View Related

CentOS 5 :: How To Install GNOME By Command

Nov 19, 2010

i have CentOS 5.5 instaled in VmWare 7.1.but do not install GNOME, how I can do to install?

View 4 Replies View Related

Ubuntu :: Lucid Command Line Ver Won't Boot After Install?

Sep 1, 2010

I did a clean install of Lucid from the alternate installer, onto a generic Intel/Celeron PC box. I used a command line only install, and used the entire hard disk; there's no other OS and no other partitions on the disk. Install goes along and finishes fine, reboots, and I can log in. But if I call sudo reboot, or shut down the machine then restart it, the boot process hangs. I see the POST screen, then a flashing cursor on a black screen for a few seconds, then the monitor goes into standby. I see no messages or any kind of output to the screen. I get the same problem using the Lucid Server installer and also when installing on a different box (Dell Intel/Celeron). I also tried running all the updates after install but before any kind of reboot...same thing.

This only seems to be happening using a command line only version of Lucid. Lucid GNOME/XUBUNTU install and work OK on both boxes. I can boot from a CD or USB key, but not sure where to look or what to check.

View 1 Replies View Related

OpenSUSE Install :: Make Dansguardian Start Automatically Upon Boot?

Nov 29, 2009

I installed dansguardian & squid on 11.2 and things seem to run fine. Squid auto starts but dansguardian does not. I have checked Yast2's runlevel services option and dansguardian is enabled to 'Yes'. But when i check with 'service dansguardian status' it reports 'unused'.If i start dansguardian by hand, things work perfectly fine.I am in a desperate situation since there are 4 other computers which are dependent on this setup to work correctly

View 2 Replies View Related

Ubuntu :: Is Command Line Invocation Of Gnome-terminal To Run More Than One Command

Feb 17, 2010

how to pass something more than a one-command startup for gnome-terminal. I will give an example of what I'm trying to do here:

Code:

#! /bin/bash
#
#TODO write this for gnome and xterm

[code]....

This same error occurs if the gnome-terminal line is changed to

Code:

gnome-terminal -e mcTerm

Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.

View 1 Replies View Related

Programming :: Command Line Invocation Of Gnome-terminal To Run More Than One Command?

Feb 16, 2010

I am trying to learn how to pass more than a one-command startup for gnome-terminal.

I will give an example of what I'm trying to do here:

Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
USAGE="
${0##*/} [-x] [-g]
code....

However, running with the -g option to invoke gnome-terminal, I get a "There was an error creating the child process for this terminal" error.

This same error occurs if the gnome-terminal line is changed to

Code:
gnome-terminal -e mcTerm

Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.

View 4 Replies View Related

Programming :: BASH: Each Line Of Multiple Text Files Gets Added To One Line?

Sep 12, 2010

I currently have 3 files with floating point data that I wish to have in a single file with the format:

Code:

F1 F1 F3 Output
a1 b1 c1 a1 b1 c1
a2 b2 c2 a2 b2 c2
a3 b3 c3 a3 b3 c3
a4 b4 c4 a4 b4 c4

View 3 Replies View Related

CentOS 5 Hardware :: 5.3 - 4Gb RAM Added - Boot Fails - Can't See Login Screen

Jul 9, 2009

I have a Dell precision 380 (system specs can be found here: [URL]. My system is set-up in dual boot configuration with Windows Xp x64 on one side of my HD and CentOS 5.3 (64bit) on the other. My system came with 2Gb (2 x 1Gb) of RAM and I recently wanted to upgrade. I bought 2 x 2Gb ELIXER DDR2 667Mhz RAM. I carefully added the new sticks to my motherboard, booted up windows via bios which noticed the new RAM was present. All seemed well.

However, on rebooting the system and entering the CentOS boot phase, after the boot phase (eg starting program... [ok] etc) but before the login screen my screen goes black / blank. My system has an ATI FireGL v3100 graphics card, I checked out the technical info on this and it should be ok on 64 bit linux. (See: [URL])

[Code]....

View 8 Replies View Related

Slackware :: New 13.1 Install The System Boot To A Command Prompt And Then Run /etc/rc.d/rc.4 To Start X?

Jul 9, 2010

2nd and 3rd might be linux kernel problems but may help someone else so I included here.1st -- run level 4, /etc/rc.d/rc.4 and xdm -nodaemonJust installed 13.1 on an odd system, including building a new kernel.One thing I do is have the system boot to a command prompt and then run /etc/rc.d/rc.4 to start XBut I found that the rc.4 uses xdm -nodaemon flag and it was causing problems so I removed and all is pretty good. I still see some odd behavior with the virtual ttys sometimes.2nd -- when building a new kernel, I found I need the device-mapper butcouldn't tell if that was a linux kernel issue or something to do with lilo, I didn't want and don't need multiple disk devices like for LVM or MD so I didn't plan to have this enabled.3rd -- CONFIG_EXT4_USE_FOR_EXT23 When that kernel config option was selected and I have only an EXT4 filesystem, the filesystem was mounted as an EXT2, even though the kernel had no EXT2 feature. /etc/fstab specified EXT4 but the mount command showed EXT2. A silent problem that could leave an unpleasant surprise since EXT2 hos no journaling.4th -- I had to run lilo -C by hand in a virtual tty before finishing the install. This was what I had to do when installing 13.0 on different hardware. It seems that the lilo part of the install needs some sorting out.

View 9 Replies View Related

CentOS 5 Server :: DHCPD Doesn't Start - How To Make It Start

Sep 2, 2010

I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !

DHCPD.CONF
ddns-update-style interim;
ignore client-updates;

[code].....

View 3 Replies View Related

Fedora :: Where To Start Command Line

May 4, 2011

I may need to handle a Red Hat server soon and thought that has the same command line.Where do I start if I wanted to learn the command line? Especially, how do you connect to a Redhat / Fedora Server using console on windows and do C programming

View 6 Replies View Related

General :: Start .pps In Command Line?

Jun 16, 2010

i'm using ubuntu with the GUIi have a .pps (power point presentation) on the desktop. I installed the powerpoint viewer and made it the default program for opening the file.when i double click on the file everything works.my problem is i need this on a schedule so i downloaded scheduled task.in scheduled task they ask me the command line i want to execute and that's where it doesn't work. I checked the "allow executing file as program" box on the file but i get the error cannot execute binary file.

View 1 Replies View Related

OpenSUSE :: Start VirtualBox From Command Line?

Feb 5, 2010

if is posible to start a VM from the command line?

[code]...

View 3 Replies View Related

General :: Start GUI Programs From The Command Line?

Aug 18, 2010

In Windows, if I have a console window open, type winmine, and press enter, Minesweeper will appear, completely separate from the cmd program. The Minesweeper instance is not tied to the command prompt in any way that I know of, with the exception of Minesweeper's parent being set to that instance of the command prompt. It's different in Linux, however.

In Linux, if I have a console window open, type emacs and press enter, Emacs will open, but it seems tied to the command line. Specifically, it appears that I can't use the command line anymore until that instance of Emacs is closed. Is there a way to replicate the Windows behavior in Linux?

View 11 Replies View Related

Ubuntu Multimedia :: Start Only In Command Line?

Apr 23, 2010

Ubuntu 9.10 (Karmic Koala) 64 bitlaptop Asus f5n vidio: GeForce 7000MI try to remove piton2.6, but system freeze, after these ubuntu show massage (after reboot)"Ubuntu is running in low-grahics mode our screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself"I press "ok"and give me next list of options"run ubuntu in low-graphics mode for just one session" -- system freeze "regonfigure graphics" -- no resultI try to reinstall graphic driver "nvidia-glx-185" -- no result

View 3 Replies View Related

Ubuntu :: Changing Gnome From Command Line?

Aug 18, 2010

I would like to make all of the computers in our lab look/behave the same. I have messed around with some of gconftool-2 to change the desktop backgrounds, but I can't figure out the following:deleting the bottom paneladding the window list to the top paneladding the force-quite applet to the top panelremoving all menu items from the system/preferences menu but soundremoving all menu items from the system/administration menu but printing and system monitor

View 1 Replies View Related

General :: Customising GNOME From The Command Line?

Aug 27, 2010

I have a number of computers which I do some distro hopping with now and again. Each time I manually configure GNOME to my liking.Ideally I want to create a script to do this (to stop me having to manually click around each time) but I can't find any information on this. I'm happy using sed to add/replace text in files if I could just find whichfiles need editing.o get me started, what file is edited when I add/remove a panel (or item in the panel) in GNOME

View 3 Replies View Related

General :: Booting To Command Line Instead Of GNOME?

May 24, 2010

I need to be able to boot into the command line, instead of booting automatically into the GUI. I have Red Hat 5, Fedora 12, and also a Suse 11 box that I would like to do this in.

In addition, once at the command line, is there any way to change the command line resolution and refresh rate. I know how to do this in the GUI, but would like to view different resolutions/refresh rates at the command line screen as well.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved