Applications :: "Unable To Create Context Rendering" Error When Run OpenGL App / Solve It?
Apr 4, 2010
I try to run Mesa gears example and I get following error: Code: freeglut (./gears): Unable to create direct context rendering for window 'Gears'
This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity.
I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5
Relevant output of lspci -v gives: Code...
I try to run Mesa gears example and I get following error:
Code:
freeglut (./gears): Unable to create direct context rendering for window 'Gears' This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity. I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5 Relevant output of lspci -v gives:
Code:
00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter Flags: bus master, medium devsel, latency 64, IRQ 9 I/O ports at 10d0 [size=16]
I installed XMBC and i keep getting this message "Error XBMC needs hardware accelerated OpenGL rendering. Install an appropirate graphic driver" i have a radeon 5750 hd graphics card. i updated the drive thru the website. but i keep getting this message.
I have openGL working fine on my system.The only problem is that when I try to run the executable file, nothing appears unless the full scene has been rendered.In fact, it appears in parts, i.e. updates after a second, then after another second etc...However, earlier, the rendering used to be continuous and I could see each pixel getting rendered in a continuous fashion.
I am running Fedora 13 with the nvidia blob for OpenGL hw acceleration, everything x86_64. I have spent a couple of days trying to get either Morrowing (TES3) or Oblivion (TES4) working under wine, unfortunately without success.
I have tried several flavors of wine: 64-bit wine from the fedora 13 repo, 32-bit wine from the fedora 13 repos, 32-bit wine 1.3.2 built from source. In all cases, running either of the games I get the same error (using WINEDEBUG=+d3d): "Direct3D requires OpenGL support." Appareantly wine d3d layer can't access to the nvidia OpenGL driver, and therefore d3d is disabled within wine -- making the two games not to start up.
I have tried looking around for a solution, but in all cases I found the root of the problem was missing OpenGL support / missing drivers. This is not my case; I use OpenGL everyday, and hardware acceleration is clearly supported in my configuration (confirmed with `glxinfo | grep direct`).
I think that wine might have problems accessing the 64-bit ogl drivers, but I don't know how to confirm it, and even less how to solve it. Clearly, installing Windows is not an option
I've seen a few people are having this issue, so i wanted to start a main thread. My problem started... After installing qt4-designer onto my Ubuntu 9.10 Gnome OS, the fonts in certain applications looked distorted like enlarged bitmaps. I tried uninstalling designer, reinstalling components, using qt4-config to restore fonts, but nothing has fixed this issue.
The issue seems to be specific to KDE applications such as: qt4-config, Amarok v2.2.0, skype, akonaditray, ktorrent, etc. Also, in qt4-config it seems to be specific to fonts between the sizes 9 to 12 inclusive for all font faces. All other font sizes seem to be okay. I've attached some examples.
When i first tried to install qt4-designer, it indicated the following dependancies: fontconfig-config libfontconfig1 libfontconfig1-dev When i try to remove fontconfig-config, it indicates that it is dependent on nearly every application in my system (including drivers and xscreen). Hence, I would need to uninstall everything and reinstall everything!?
I just preupgraded from Fedora 14 to 15 on my Toshiba NB205 netbook (the preupgrade went smoothly by the way).
Immediately upon logging in, I discovered catastrophically poor quality of font rendering in every terminal window program I tried, (and I checked plenty like LilyTerm, Sakura, gnome-terminal, etc) and in web-browsers.
The symptoms are the same for all applications: the glyphs are very thin, anorectic, and very ugly.
The described behavior is desktop independent: same in Gnome (3 and the fallback mode), fluxbox, Openbox.
The machine boots, graphics come up, login window shows up, but after login there is only the background window (and mouse). My .xsession looks like this:
I ran "yum update" and updated my new installation. Afterwards: my main application stopped running. It iis an xwindow app. I am trying to run it from a terminal on the gnome desktop. How can I back out my updates and which packages should I try to remove?
I have been working with ssh for a long time without problems but suddenly, without any changes to the configuration, I am facing problems. When I try to login I get the following message and the connection is closed:
Code: Unable to get valid context for tanwald I ran SELinux in permissive mode and found the following logs:
I downloaded an FLV video and placed an extra MP3 file over it. Two files. Total: 30 MBI experimented with about seven rendering containers, and QuickTime renderer was the only rendering container that didn't result in sped-up/compressed video or correct rendering for just fifteen seconds.How in the name of all that is holy did this rendering end up with 570 extra MB?
I looked for a little and everyone's problem similar to this it seems they are tunnelling for a vnc server of some sort. I am just running ssh and it fails not only from the machine, but also remotely. The username "lee" is in group "sshusers"I have two machines setup the same, as to my knowledge. In one server I can access ssh and everything works well but when I try to ssh into the other one it gives me this
I'm trying to run a program called Alice 3.0. When I load the program, it crashes at the splash screen. I ran it in terminal, and this is the error message I received:
UNABLE TO LOAD OPENGL The most common reason for this is an incorrectly set Java library path. Please update your VM arguments. The text below has been copied to the clipboard for your convenience. Linux-i386
all properties --- ---------- <?xml version="1.0" encoding="UTF-8" standalone="no"?> <!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd"> <properties>
I just updated my system, not sure which package may have caused this, here are the outputs:
Mutter: Code: (mutter:4637): Clutter-CRITICAL **: Unable to initialize Clutter: Unable to select the newly created GLX context Window manager error: Unable to initialize Clutter. Compiz:
I just upgraded from FC8 (32-bit) to FC11 (64-bit). In doing so, I backed up my entire World of Warcraft folder so I could try to avoid having to download and install it all over again. However, I've now reinstalled wine (64-bit now), and the nvidia drivers from the rpmfusion repos (also 64-bit), and when I try to start WoW, it says it cannot load OpenGL. I'm wondering if anyone knows what's up, and if there's a solution that doesn't involve reinstalling WoW.
It is saying to make sure there is enough room in the tmp folder, so I cleaned out the entire tmp folder but the same error is still happening. Is there a way to make the tmp folder bigger? Or perhaps extract the temporary files to a different folder? Or maybe the size if the tmp folder is not even the problem?
I have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
I was trying to get a game to work (scorched 3d) but I kept getting a resolution error. So I did some looking around and found that I had to do something with xorg.conf in /usr/bin/x11 (if I remember). Well I didn't have that file, so I installed a program that had it (and for the life of me, I don't remember what it was). Long story short, I tried to run a different game (foobillard) and it wouldnt run. So I ran from terminal and got an error saying that x11 is not configured with opengl. Now I am mad cuz that was my favorite game. Is there a way to reset x11 and opengl without losing everything?
I've after an agonizing process of editing I finally finished my video that I was working on. Now it's time to render it, I want to render it to quicktime for linux so that I can encode to mpeg using mencoder as described in the cinelerra docs. Problem is , the movie won't render, it shuts down the process saying render error and that's it.
The docs say that quicktime requires these properties: Audio option Two Complements 16bits (PCM) Video option DV but can't find any place that asks for anything like that setting.
I recently downloaded Frets On Fire and the HRP Polymer pack for Duke3D...Duke3D runs fine with just EDuke32 and no mods, just Duke3D and EDuke32. But when I try the HRP Polymer pack, it says in Terminal "NVIDIA: Direct Rendering failed, attempting indirect rendering." This is fine...if I want the game to lag like hell, I'm sure my video card and the driver for it support DR, the video card is a NVIDIA Geforce FX 5200, the same message appears in terminal when I run Frets On Fire, I think it does with other games too, if someone could explain how to enable Direct Rendering.
I try to install IPsec-Tools on Slackware 13, but I get an configure error: configure: error: Security Context requested, bu no selinux support! Aborting. I'm linux newbie and I'm following a slackware-basics tutorial, I did as in the tutorial, but the configure stops and aborts:
[Code]... What can I do? How can I enable/install selinux support? I guess it's related with AH and ESP protocols, which in my kernel are defined as modules (m). If so, how can I enable them?
I have moved from MS directX to OpenGL on Linux Debian. My computer is running Jessie version with Gimp. I am trying to use several of the gl 4.0 functions but getting compiler error. I check for OpenGL version and appears to be version 1.5 .... How can I verify the correct openGL version and how can I upgrade to a moder version of at least 4.0?
I installed Matlab in Ubuntu 10.10. I was able to get it running and I saw the initializing screen. However it showed me an error with OpenGL "warning : could not query OpenGL" and it freezes there. I tried many things to get over with it and it didn't work.
Just reinstalled kde 11.3 on second hd. Everything seems to be okay except for getting additional repositories. Under yast I get the message unable to download list of repositories or no repositories defined. Any ideas on what I can check?
I've downloaded some torrents, and someone CONVENIENTLY made them a multiple file archive instead of a single file.
I've tried unrar -x <filename>-part1.rar, which it says it completes, then I don't see the file. What do I need to do? WinRAR usually decompresses them just fine, but on Linux is where I have the problem.
More importantly, why on Earth would anybody do this?
I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
I'm having some problems compiling mednafen on Suse 11.4. When I run configure, things work fine until I get the following series of errors:
[Code]...
configure: error: *** OpenGL header file not found! I've seen references in a few places that these type ("Present But Cannot Be Compiled") can usually be ignored, but in this case ./configure fails and I can't make. I am unsure why this is, as I've installed mednafen on Suse 11.4 before and it runs fine. I've tried installing various OpenGL-related packages that I can find (Mesa, freeglut, glib, etc) but nothing seems to solve the problem
I installed the Kde desktop and i'm unable to setup a broadband dsl connection i have done the settngs in network manager gave password username service name etc. but the option for connection doesnt appear the connection works properly in windows as well as gnome 3 desktop but not in kde