Whenever i updates ubuntu through update manager at the next boot i found two more entries (one of which is for recovery mode) added in my boot menu. So can anyone tell why it is so? And how to get rid of it
View 5 RepliesMy laptop is set to dual boot, either Ubuntu 9.10 or Windows Vista. The GRUB loader has multiple entries, starting with Ubuntu, then several instances of Ubuntu recovery mode, before memory test and two entries for Vista, the first of which does not work. How do I delete the unwanted entries? I can press "e" to edit them, but if I do so how do I actually delete them, assuming it is safe to do so.
View 7 Replies View RelatedI have PC with following specs:
Intel E7500 CPU / Intel G31 Motherboard
Kingston 800MHz 2GB RAM
Hitachi 500 GB SATA HDD + Seagate 160 GB SATA HDD
I initially had only 500 GB HDD. I installed two installations of Windows 7 Ultimate - one 32-bit and one 64-bit installations. Both working fine.
Later on I installed the 160 GB HDD and installed Fedora 13 in it in a partition. The rest space of the 160GB I am using with Windows for storing data.
Now, the boot entries of both Windows installations are in the Grub Loader of F13. Means, if I remove the 160GB HDD, I cannot boot into my Windows installations.
Now I want to remove the 160 GB HDD and install a new 2TB hard-drive. That way, I cannot log into my Windows. And I do not want to lose the Linux installation also.
How can I remove the 160 GB HDD and install a new one without sacrificing my Windows installations?
OR...Is it possible that I can copy complete image of F13 on to the new HDD, so that things are same for the Windows installations?
I have an existing WinXP install on the main drive (/dev/sda) of a Dell laptop. I installed OpenSUSE 11.3 on the second (caddy tray) drive and didn't touch the existing windows partition during install.After install completed, I found there was no boot loader entry for WinXP during startup. Only SUSE-related stuff. I opened YaST boot loader and tried creating an entry of type "other" and device of "/dev/sda1" and set this as the default entry.The /boot/grub/menu.lst file now has an entry:Quote:
title Windows XP-32
rootnoverify(hd0,0)
chainloader (hd0,0)+1
[code]....
I am working on Red Hat Linux since last six months and learning it steps by steps. like configurating ftp server,NSF ,DNS and then email server. I want to learn squid server but technically before going into it what you suggest me that may I first learn to configure Linux as a router,Firewall machine or do IP masquerading on a server. Because all these things are directly or indirectly involve in squid.So guide me because going to start squid i may understand Linux IP table ,how to add entries in it,how to delete entries ,I think you understand my point which i want to ask for guidence.
View 4 Replies View RelatedI installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies View RelatedI have a laptop with windows vista installed on the internal hardrive.Last March I installed wanted to start to use linux so I brought a separate external hardrive partitioned it to enable media storage on one section and installed ubuntu on the other half. It works fine and so does the windows vista on my internal hardrive, however I have to have the hardrive plugged in to boot.Until now this hasnt bothered me, however I've recently started to take my laptop into university and cannot switch it off unless I have the external hardrive with me as I cannot switch it on without it.With it plugged in it loads up GRUB and then gives me the option to load either Ubuntu or windows vista, however if it is not plugged in when I power up it says GRUB loader failed.It also occured to me that if for some reason my external hardrive fails in the future I wont be able to use my laptop anymore.Has the installation of ubuntu (and GRUB) altered the MBR?
Is there some way I can edit the settings so that I can load windows vista without the hardrive plugged in, and then if it is plugged in I get the choice which one to load?
Intalled GRUB using Live CD. My problem is very similar to these..
Code:
1. sudo grub-install --root-directory=/mnt /dev/sda
2. sudo mount -o bind /dev /mnt/dev
3. sudo mount -t proc none /mnt/proc
[Code]....
There are 2 osx entries in the grub menu one is 32-bit and the other is 64-bit, how i can get rid of the 32-bit one? i am using ubuntu 10.4 and snow leopard 10.6.3
View 9 Replies View RelatedI have Googled this one and I have tried several fixes so far nothing has worked. All I want to keep is these entries in my grub menu:
"Ubuntu, Linux 2.6.31-19-generic-pae"
"Ubuntu, Linux 2.6.31-17-generic-pae"
"Microsoft Windows XP Professional"
1st - Through Synaptic I removed:
linux-headers-2.6.31-14
linux-headers-2.6.31-14-generic-pae
linux-headers-2.6.31-15
linux-headers-2.6.31-15-generic-pae
[Code]...
i'm using ubuntu 9.10... i'm working on some projects on L4 microkernel... i want to add it to the grub...i was familiar with the earlier grub, i.e editing the menu.lst...
title = L4Ka:istachio/i586 pingpong
kernel=/boot/kickstart
module=/boot/i586-kernel
module=/boot/sigma0
module=/boot/pingpong
how can i do this in new grub version...? i tried adding the following to /etc/grub.d/40_custom but failed...
menuentry "L4Ka:istachio" {
set root=(hd0,9)
kernel=/boot/kickstart[code ]..........
I got some entries in my auth log that I am puzzled by. What could be the cause? I was not using my machine at the time of the logging.
Code:
In ubuntu 10.04 how to protect Grub Entries...?
View 3 Replies View Relatedgrub is giving me six (6!) repetitions of my Ubuntu Lucid install on sda5, five repetitions of my old karmic install on sda1, and I think four of the recovery option.Where have I told it to do that? How do I fix it??The grub choices look like this:
Code:
most recent lucid kernel on sda5
most recent lucid kernel recovery option
[code]....
I followed the following instructions [URL] to get my custom text to appear. The result was many GLTexts in my screensaver properties.
Does anyone know what I need to edit to get rid of all the extra entries?
I used Ubuntu a few years back. I simply was not able to make it my main OS since I couldn't get video calling to work reliably enough. Anyways I just installed and noticed my grub menu had many more entries then I have operating systems on my computer. Some reason they came up as duplicates. I have so far gathered they took away my menu.lst, they replaced it with something like etc/general/grub. It appears editing this file doesn't give me the ability to change entries. There are a few I would like to rename, and a few I want to get rid of. There is also some other file that is not supposed to be edited, will I need to edit this or is there another way around it? I found info like this, but it is only adding not removing.
Assuming that you already looked at the grub2 documentation and had trouble figuring out what to do, try this. Use sudo to edit /etc/grub.d/40_custom. It will look like this:
Code:
#!/bin/sh
exec tail -n +3 $0 .....
After making the change, run 'sudo update-grub' to apply the change to your grub config.
TLDR: Grub 2 added extra entries, how do I remove and rename some?
I have a dual-boot grub2. On the list, there are Ubuntu 10.04, Memtest x86, and Windows7. I was wondering if it is possible to make Windows 7 first in the grub boot list. At the moment Ubuntu is first, so if it's possible to make windows 7 first.
View 2 Replies View RelatedI'll get directly to the point, I've installed Ubuntu, Linux on the same partition as Windows 7. Everything works just as it should be, no problems and I'm actually enjoying Ubuntu. It's a nice and clean OS.
Now, I'm having trouble with the GRUB, since I have updated Ubuntu a few times. It's not a large problem, but I don't like it around.
I attached a picture of my GRUB, it may take too many words to describe what's going on, so see for yourself.
I have UUID entries for USB devices in fstab in my Ubuntu 10.10. I assume this is because I have upgraded my Ubuntu's since 8.04. Each time I boot, I get a message saying it cannot mount the devices even though they are present. I have to skip mounting in order to complete the boot process. I also have two filesystems mounted at Root ( /). See later post in this thread.can I safely remove these entries from fstab and have Ubuntu automount the devices? If I do so, will this get rid of the messages at boot time?
View 3 Replies View Relatedhave Xubuntu with XFCE 4 installed. How to add additional entries to the XFCE menu?
View 3 Replies View RelatedIn Xubuntu, the xfrun4 dialog (alt + F2) doesn't have auto-completion for every command, only for those commands successfully called at some previous point in time. My question is: where are these entries located, and how can I remove some of them?
I'm just curious because I'd like to keep my entries uncluttered. I was experimenting earlier to see whether xfrun4 would retain an invalid command, so I tried the inexistent (so I thought) command "terminal", but lo and behold, it opened a new tab in Firefox and brought me to www.terminal.com. Now I have the useless command "terminal" saved in xfrun4, and I'd like to get rid of it.
My rc.local file is this:
echo auto > /sys/bus/usb/devices/1-2/power/level
echo auto > /sys/bus/usb/devices/1-4/power/level
echo min_power > /sys/class/scsi_host/host0/link_power_management_policy
[code]....
I am thinking the GRUB 2 more functionality was achieved at the price of presenting a user with what I experience as Byzantian mangle of default loaded templates, almost designed to make me give up and leave the defaults.menu.lst is no more - its now /boot/grub/grub.cfg DON'T edit it! /etc/grub.d has the new stuff. These are not just a list of boot-up choices anymore. It requires one to be a programmer.One called 20_memtest86+ is not really to be meddled with. I tried simply making it non-executable.The last choice, 40_custom, allows to add entries only - not quite what we wanted to do.
View 9 Replies View RelatedBefore Ubuntu I used m8, and the boot options for m8 still shows up in the grub startup screen. I want to get rid of those m8 entries. I have edited grub in the past, and it was just a regular text file, where you could just remove lines or even change listing order.Edit the menu using the command "sudo gedit /boot/grub/menu.lst.No good, there is no such file on my system. After password, That command displays a blank Gedit screen.
View 5 Replies View RelatedA while back I suddenly lost USB support on one of my computers. At first I thought it was a HW problem but I'm not completely sure. What configuration files have entries for the USB, especially at startup, so that I can check them against the ones on my working computer. I'm running Ubuntu 10.04.
View 2 Replies View RelatedHow can I remove entries manually that were automatically generated by grub 2? I have the scripts I need to add my entries, but I don't want the osprober to keep adding new entries. Even if I make the 30_osprober script non-executable, the entries are still there. Can I do this without "breaking the rules" and editing the grub.cfg file?
View 2 Replies View RelatedSo today 2.6.31.17 came. to the b1tch of a cat sleeping on the keyboard, I was forced to a restart before I wanted.
Anyway why does each have have entries for :
linux-headers-2.6.31.17
linux-headers-2.6.31.17-generic
[code]...
How do I know which one I should use from the choice of 3 for the current kernelAnd if I understand which one to use, can I delete the others from the same imageAlso, in start-up manager I have choice of 4 from the drop down list?
when i turn on my computer it says: error : no such device : a77318a7-5f3d-4531-8d27-370f2b43c0e2.Failed to boot default entries
View 9 Replies View RelatedI have made a custom grub2 menu however, both the default and the custom show together. So my grub looks like the list below, the bolded entries are my custom ones. How do I get rid of the duplicates? I have tried apt-get remove and deleting old kernels.
ubuntu,linux ...
ubuntu,linux recovery
memtest
memtest
windows7
windows7
ubuntu linux
ubuntu linux recover
I used to be able to resolve this problem by simply opening my sources.list file and doing a search and delete, but now Ubuntu appears to have two completely different methods of handling sources. What is is the simple solution? I would really like to have everything all in one place.
Code:
W: Duplicate sources.list entry http://ppa.launchpad.net karmic/main Packages (/var/lib/apt/lists/ppa.launchpad.net_sunab_ppa_ubuntu_dists_karmic_main_binary-i386_Packages)
W: Duplicate sources.list entry http://ppa.launchpad.net karmic/main Packages (/var/lib/apt/lists/ppa.launchpad.net_mozillateam_firefox-stable_ubuntu_dists_karmic_main_binary-i386_Packages)
W: You may want to run apt-get update to correct these problems