We just recently started using Linux Ubuntu. I've been having trouble opening PDF files. I can open and close just a few PDF files one at at time, but then suddenly when I click on the PDF link, it opens up to a blank page. After that, all I get are blank pages
View 4 RepliesI am having problems in printing 'complex' PDF files. Simple pages are no problem. Good examples is Royal Mail postage printing. Generated PDF displays correctly - and in Ubuntu 10.10 printed perfectly. Since I upgraded to 11.04 I get a blank page. No matter what I do. I have tried everything suggested when I googled the problem - but no solution works. I am printing across the network through my NAS box (no changes to that at all) to an HP Laserjet 1010. It all works correctly and as expected under Windows - so the setup is fine with printer and NAS. its a problem introduced by 11.04.
View 3 Replies View RelatedI have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View RelatedI just installed FC14 on 2 different PCs. It takes over 40 seconds for either of them to open some webpages, ie amazons home page. It is not my internet connection. I can open the same webpage on both my Windows PCs in less than 5 seconds. I was using FC9 up until 1 month ago, and I believe it took about 15 seconds to open amazon, but I never actually timed it. I spend many hours a day on the internet and have used FC for many years. I have been very happy with it. Until now. My PCs are 1.8GHZ single processor and 2.4GHZ dual processor. Do I have to revert back to FC9 to fix this, or use a different distro?
View 4 Replies View RelatedMy HP F4180 only prints blank pages. It can, however, print out a test page, so there's no issue with the ink or hardware, it seems. Also, it used to print properly in the past. I've run hp-check, but the program ends up with no warnings or findings. Likewise, the HP appelet ends every print job with a 'completed' status, seeming to think all's well. The only remote clue I've found so far: HP's troubleshooting tool noticed that the page format is 'letter' (small 'l') according to the printer settings in System>Printing, but 'Letter' (capital 'L') according to the Open Office printer properties dialogue box launched when trying to print. The troubleshooter referred to this discrepancy as a possible 'alignment' issue. Could this possibly account for the failure to print? If so, how could the two page size descriptions be made identical (they come from drop down menus which I don't know how to access)?
View 6 Replies View RelatedWriting this from the windows box since my problem is php pages display blank in any web browser on my kids computer running 10.10. and the forums are php based.All the threads I have seen are from people with a local apache server and php server running. This is just a workstation and nothing server like installed (well not apache or php anyway)so everything I have found tells me to check config files that of course are not there.Anyway since his favorite web game is php based he is currently a bit upset. It did work when I initially installed 10.10 on a full flatten and reload.
View 2 Replies View RelatedIm using fedora 8 and have installed php5 ,and mysql and i see only php blank pages ,some idea? must be php.ini, but i am newbie installing php and apache, i disabled selinux, and grant all the permisssions to excecute..
View 3 Replies View RelatedIm unable to print pdfs. the printer only gives me a blank page. what do i need so it can print? I tried going to "advanced" and checking "print as image" but it does not work. Printer still gives me a blank page.
I have an HP printer Photosmart C6100 series.
I installed Xubuntu and was thrilled to see that it had already setup my Brother HL-2140 USB laser printer.However, there is something seriously wrong with the setup. When you try and print, even a test page - it just churns through the entire paper tray printing nothing. Also, when you restart the computer it tries to print the jobs again. I went to Printing and selected the printer but could not find where you could see the print job queue. I did see it during troubleshooting and was able to delete the jobs on the troubleshooting screen.
View 3 Replies View RelatedAfter the Suhosin-Patch, I can no longer load mythweb pages from my mythtv server. Checking the apache2 error.log yields the following.
PHP Code...
I noticed that this appears to be an old bug come back to life again, but the fix to it was never revealed.
THIS ISN'T A SCRIPTING ERROR! I'M USING PHPMYADMIN (or trying to)! People on #httpd are useless for help.
Well, ir jus installed Apache2 and PHP5 on my openSuSE 11.2 server, and I just get blank pages for PHP, but HTML works fine. Ima jus guess this is a common error.
I installed PHP 5.3 from remi repository and now some PHP pages end up as blank pages. Joomla pages load with no problem but iDevAffiliate pages end up as blank pages. Could it be something in the php.ini file? I have no idea where to look. Any ideas?
P.S.: I run CentOS 5.5 and MySQL 5.1
I'm trying to get a Brother HL-2040 printer working, without much success. I installed the brother-cups driver, but that didn't work. When I try to print, the printer just shoots out blank pages, and the only way I can stop it is by unplugging the printer. Worked OK on Ubuntu 10.10. I have gnome fallback, if that matters. There's a post saying that I need to download a ppd file, [URL] but when I try to get it, it opens a page instead of downloading a file. Also the information is from 2008, and I don't know how well that will work with all the changes that have been made to Ubuntu and the newer kernel. I got lucky! went to: [URL] and got the .deb files for the lpr driver and the cups driver. Had to use sudo dpkg -i in the terminal, as I couldn't get the software GUI to work. But it prints.
View 1 Replies View RelatedI have dualboot between Windows XP and Ubuntu 9.04. I have HP deskjet prineter, model=D1560. Ubuntu installed the printer automatically. The problem is that when I print any page in Ubuntu, the printer does not print anything and eject the page blank. But Windows XP is printing finely.
View 1 Replies View RelatedI am using ubuntu 10.04 and after installing some programs using the package manager I try to open the program and all I get is the title bar and a blank white screen. I searched the forums and found a thread from awhile back saying to create a new user and see if it persists. I tried that and it does the same thing in the new user. One in particular is gnucash. The program sometimes works but the tutorial does the white screen. I also reinstalled the package several times with no luck. Other packages do the same thing like thunderbird.
View 9 Replies View RelatedRecently i had migrated from windows 7 to fedora 15. i have lot of flipbooks with me and unable to open those flipbooks in fedora. finding a suitable solution to open those flipbooks. is there a software to open these books linux. in windows there is no requirement for special softwares to open flipbook, since it is similar to flv or swf files. i had already tried with wine. with wine the file is opened but do not displays the contents or pages, show a blank white screen. @people who dont know about flipbooks: flipbooks are flash objects usually created from pdf files used for reading, flipbooks simulate the reallife book actions(page turning).
View 1 Replies View RelatedI'm struggling on installing a KONICA-MINOLTA printer magicolor 4695MF printing properly with Linux Mint Debian Edition (up to date). The test page works fine...
KONICA-MINOLTA delivers 2 PPDs: one for standard printing and one for OpenOffice printing (available on the KONICA-MINOLTA support site).
Leaving a side the one for OpenOffice which is poor in using the capabilities of the printer, I concentrate only on the global one (M4695PX.ppd).
It's much more difficult for other applications, starting with EVINCE: some PDF files are printed properly (i.e. those generated in OpenOffice by the CUPS PDF printer), others come out as one only blank page, regardless to the original length of the document.
So documents received from 3rd party may be "printable" or not. And trust Murphy, the most critical aren't printed...
Attached, the troubleshooting file generated by [system-config-printer] => [URL] ...
I'd like to take a regular .pdf file (also converted it to .ps), and double the pages and switch it to landscape orientation. I've used the tools at the following website, but it doesn't exactly do what I want it to.[URL]... In particular, the left page is too far to the left, and both pages are too high up. Please see attached screenshot of one of the pages. I'd like to get this to work because then instead of printing 234-page coursenotes, it'll be half that. Does anyone have a good solution to do this?
View 5 Replies View Relatedi have started using linux for less than 6 months. now i have come across a problem with pdf files in linux. i want to join different pages from different pdf files into single pdf file.i have come across softwares that do this but they perform this using page numbers from pdf files.but i need to do this based on keywords in different pages .for eg there 3 pdf files
india.pdf
contents:languages
.........
........
places
......
......
achievments
......
[Code]....
now i have to create a pdf file langunage.pdf ,combining the topic languanges from three pdf files america.pdf,india.pdf,china.pdf how can i do it?? whether there is any open source software for doing this?.
After upgrading to 9.10 I am having trouble opening my old files encrypted with pgp. My keyring is still on the computer as I did an update and not a clean install. The problem is that I get a message saying that there is no pgp/mime program installed to open the file. Which program should I install to fix this?
View 4 Replies View RelatedI'm running 9.04 jaunty. I made a file in gimp and saved it as .xcf. I want it to be a pdf file, so I try opening it with open office drawing, but it keeps opening it with the word processor instead. The word processor starts the file if I do a right-click 'open with' on the file on my desktop, and even if I use open from the file menu in drawing itself. I'm wondering what to do to get drawing to open this file. Is it that .xcf is not supported by drawing?
View 4 Replies View RelatedI have this file that is about 3.6GB, I'm trying to open it through wine. But it gives me an error saying I can't open it. I'm not sure if this is a problem with wine, or do I need some special code to put in the terminal?
View 5 Replies View RelatedI need a software for opening the .PSD files.
View 1 Replies View RelatedI have a laptop that's not up to par with opening 1080p video. I do however have a PC that can. I've connected my laptop to my TV as a media center. I can remotely access files from the PC to play but because the laptop's resources are being used to play it I still encounter some slowdown. Is there any way to remote access the other PC while using its resources to play the video?
View 6 Replies View Related9.10 Karmic Koala. issue running gscan2pdf. It works fine for scanning, but I want to use it to concatenate / edit existing pdfs. But it hangs on opening PDF files (Import of picture from PDF works fine, but that's not what I need). I tried with a lot of PDF from a lot of different sources.
I added the line "resolution = 200" in the .gscan2pdf file to solve the issue where scanned PDF won't save.
I tried to reinstall the package with Synaptic without more success.
Here the output with debug flag :
I have another thread going about my issue but i have go no responses so i have been trying to fix it myself so on my journeys i thought it would be helpful if i could open my .disk files so i can access the logs so i can see what errors im getting. other thread is [url]
View 1 Replies View RelatedWhat is the command that opens .desktop files? Gnome-open opens it in an editor. I need it to open the application that it refers to. Even better would be general method to find out what application it refers to.
View 1 Replies View RelatedI've been getting annoyed with the way that Firefox opens files for me. I used to have it so that they would come up with a window that asked whether I wished to save files onto the hard drive or simply open them. When choosing to Save, they would go to my Desktop. Because I mainly save files from my Uni website, they are generally .pdf files. N for some reason, they open in the Firefox window, so then I have to go to File, Save, then choose where I want to save it. It would be more efficient if it worked the way it did originally. How can I get the settings back to the way they were? I am running Ubuntu 9.04 and Firefox 3.0.19. Because I use a shared computer, I'm not sure whether the version of Firefox has been changed.
View 9 Replies View RelatedSo I have Python file :
Code:
#!/usr/bin/env python
print 'python'
raw_input('')
And another :
[Code]....
as it should. I don't want to take such a hassle always running python by path.