I installed ubuntu 10.10. When the installation finished ,and it asked me to restart . When it did it loaded into a dos like for grub.I don't know to do from there. I installed it on a computer that originally had windows98 with a 6.5 gig hardive
View 4 RepliesI'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies View RelatedOkay I did a clean network install on 11.2 on my test machine.Old gateway box but it had min requirements. It will load completely into failsafe mode but will not complete a normal boot option.The default Green background images comes up and the cursor comes up, but I let it sit for 30 minutes and nothing. I did a hard reboot, still hung on cursor and green back ground. Booted again but this time choose failsafe, boot up completely. Am I doing something wrong? I have installed many many version of Linux in the past never had a problem like.
View 9 Replies View Relatedso after i managed to install ubunut x64 my Windows 7 will not load...
my partition table looks like this:
Partition File System size
/dev/sda1 ntfs 100.00 MiB
/dev/sda2 ntfs 445.66 GiB
/dev/sda3 extended 20.00 GiB
/dev/sda5 ext4 19.12 GiB
/dev/sda6 unknown(swap?) 895.00 MiB
unallocated unallocated 1.02 MiB
currently I was using GParted to find this out. I think the Grub boot loader is pointing to the wrong partition for windows. This is because a few months back I had an uncessesful atempt to install ubuntu w/o grub and tried to use the windows boot loader.
I then realized that it did not work, so I was able to fix it using My Windows 7 recovery tools. So in Grub should it be pointing to /dev/sda1 for windows or /dev/sda2 ?
When I installed Ubuntu 10.04 on my pc, I noticed that it required a little more graphics then 9.10. After I logged in, I only see the Ubuntu background, but with nothing else. I really want to use Ubuntu on my computer but it just wont load properly after a full install
View 9 Replies View Relatedi am installing Ubuntu version 9.10 in VMWare Work Station 7 but i can't get passed to 'Install Ubuntu'. I tried pressing enter but it still won't load.
Is there any key or command that i have to enter?
I messed it up with the grub in Ubuntu Netbook and the grub loader just prompt the "grub console" during the system boot.
However, I can boot manually by selecting manually the kernel:
Code:
kernel /boot/vmlinuz-2.6.32-24-generic
boot
But, of course, that is not really practical for an everyday use.
I tried with the update-grub command, but nothing happens, the grub.cfg is there, with all the kernels list, but the grub loader won't load it! It is just ignoring it!
If I load the config file manually it prompts the grub command line again (with the "welcome" message), so, it IS loading the grub.cfg, but it's not working!!!
This is the content of my grub.cfg file:
Code:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
[Code]....
I have a Gateway laptop currently running Win Vista Home Basic. I have grown tired of repeatedly reinstalling this OS so I thought I would give Ubuntu a shot. The laptop is running a 1.6 GHz Celeron, 1470 MB of RAM, and has an 80 Gig hard drive. My problem is that I cannot get Ubuntu to load/install. I cannot run it from CD, I cannot setup as dual boot, and I cannot setup as a standalone. I am not worried about wiping out my Vista, as I said I have grown tired of it. OH and I cannot locate my Vista install disk at this time either.
View 6 Replies View RelatedWhen i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
Now I installed Opensuse on my system which already had Ubuntu 10.04 and Windows 7 on it. Whilst Opensuse's replacement Grub correctly identified Windows as an alternative system it did not do the same for Ubuntu. I've been tinkering around in menu.lst (after taking back ups) and I can't ever get Ubuntu running - I either get a Grub error 15 (file not found) or error 17 (unable to read partition). By booting on a live CD I can see that all the information is still there, I just can't for the life of me figure out how to get to it from Grub! Did Opensuse move the partitions around during install?
View 5 Replies View Relatedi was moving some images over to my external hard drive last night and the install went to read only and i couldn't do anything so i rebooted and now i cant load into the desktop i just get init frames command line
View 3 Replies View Relatedhas anybody tried 10.10 on their PS3 (FW 3.15)? I first ran an update from 10.04 (which was working fine, including ext4 FS), and upon rebooting after the update, all I had was a black screen after PetitBoot. I then tried to do a clean install with the 10.10 PPC+PS3 Alternate CD, but same black screen after selecting any type of install from CD in PetitBoot. I then installed the OtherOS that's on the 10.10 CD (KBoot); same black screen. Went back to PetitBoot and tried the PS3 desktop 10.10 CD; same problem. I was almost ready to give up and reinstall 10.04 when I thought of using the "linux-old" option in PetitBoot. This loaded the newly upgraded Ubuntu 10.10 on my HD, with the difference that it's using kernel 2.6.32 instead of 2.6.35. This works fine. So here's my question (at last ): was the PS3 port of 10.10 tested by anyone before being pushed as a release on cdimage.ubuntu.com, or is there an incompatibility with kernel 2.6.35 that was never noticed, except for here where it didn't seem to go anywhere: [URL]? If I'm the only one left on earth with firmware 3.15 and interested in Ubuntu on PS3 at this point.
View 5 Replies View RelatedIs there anyway to install/load Active X on a Ubuntu/Firefox workstation?
View 3 Replies View RelatedI just installed the newest Ubuntu release through the update manager and, after the restart, GRUB won't load. Before GRUB would normally load I get the message: error: the symbol 'grub_xparts' not found grub rescue> How can I fix this? Background: Running an XP and Ubuntu dual boot with the two OSs on different hard discs.
View 9 Replies View Relatedanyways, i have an older system i got from my school with 300 some mb ram and a maxtor 20 gig hd. it was formatted and i had ubuntu 8.10 installed on it (i don't have 10.04 yet). everything installed fine, but when i start it up, i can log in and everything, but instead of loading a desktop, it shows a brown screen.
View 6 Replies View Relatedhow do i load/install Alien Arena maps??i downloaded the deathbox.zip from this site URL....
View 1 Replies View RelatedI use a ZTE 626 USB modem to connect to the internet (and yes, i am in the wilds of nowhere!) which using USB-modeswitch 1.1.0-2 and ubuntu 10.04 works well.
I just upgraded one machine to 10.10 and it included the new modeswitch 1.1.4 which does not work, the modem is never discovered. I searched around and found that this is a bug in the latest modeswitch and apparently if you back down to version 1.1.3 it works.
So, i have two questions,
first, where can i find version 1.1.3 of modeswitch. I have searched and cannot find older version than 1.1.4 as a .DEB file.
second, i do have a really old version of modeswitch (1.1.0-2) on my hard-drive and have been trying to load my older 1.1.0-2 version and am having real problems with it. I remove the 1.1.4 version and its data using the ubuntu software centre and it looks like it properly is removed. I then click on the .DEB file that contains 1.1.0-2 and it opens the software centre and installs it (the data seems to be automatically loaded as i never have to install that). I then search for modeswitch and the version that has been installed is the newer 1.1.4 one, not the older one i clicked on. I am confused as this computer is not attached to the internet but it seems to find the newer version from somewhere, uses it and therefore does not work. I presume the version 1.1.4 is cached somewhere and i am not able to clear it out.
Incidentally, the source of the information that i have so far is here:
[URL]
From reading this, i do understand that there is a problem, After reading this bug fix I tried editing the config file for the modeswitch modems and changing all of them to the format indicated, but no joy.
I am having problems with getting the drivers to work for a geforce 9500gt.To get started Im working with a fresh install of 8.10, and I have successfully installed the driver package for this card from nvidia's site, version 260.The problem comes after I restart the computer. It fails to load. I am able to install the driver and start X and it works greatI can even restart x and it still works. but as soon as I restart the computer it doesn't load. I then need to reinstall the driver. I am curious if anyone has an idea of whats wrong here? I am wondering if it's a possible xorg.conf problem so I will post that below.
xorg.conf file
Section "ServerLayout"
Identifier "Layout0"
[code].....
Trying to install iso disk image of vers 10.10. does not seem to want to load from boot. used alcohol 120 for burn,which is usually very reliable.But install seems to stall early into load.
View 4 Replies View Relatedi,m just about to install 11.2 from 4 gig dvd, what is the minimum size to be able to install system, I will be triple booting with Win xp Ubuntu I'm just after reccomended boot size I wanna share Home with Ubuntu, windows will just have 15 gig for a game not using the home hope this makes sense
View 9 Replies View RelatedFollowing a zypper dup and turning my computer off for a few hours; when I rebooted, I got a message saying, "error: you need to load the kernel first press any key to continue . . . " And then it goes back to the grub menu for of the same if I select openSUSE 11.2.SystemrescueCD won't boot it. I've tried to "repair installed system" and "rescue" with my openSUSE 11.1 DVD -- it won't even acknowledge (as it were) the presence of 11.2 or the system on the other hard drive (though it does recognise the partitions).The PCLinuxOS 2009 KDE and GNOME live CDs will redo the MBR of installed systems (at least, as far I know, PCLinuxOS is one of systems). In my experience, the 11.2 live CD won't. I was hoping the 11.1 DVD would. What to do?
View 9 Replies View RelatedAfter installing 11.2 and selecting dvorak keyboard during the install process was surprised to see that was still in qwerty.
When then selected dvorak at session login, still wouldn't switch to dvorak. When checked loadkeys and other places in config files and system settings, all said dvorak -- but still could only get qwerty.
11.3 will not load after the first reboot during install, after the reboot the screen just goes blank and that's all.
This is a single setup no dual boot, from openSUSE-11.3-DVD-x86_64, on brand new Latitude E6510 laptop.
I've tried to load 11.4 first and 11.2 next. New HD New Asus/ Inte, Celeron 266 Mem 3g using KDE Everything loads but when I try to set up DSL I get message: This package needs to be loaded, SMPPD. [Click install]. After [Click Install], Whether I use Network setup with or without ipv6 option or Ifup with or without ipv6 I cannot connect to /download.opensuse.org. I've tried to load Kinternet but the problem is the same,
it can not connect. Repositories are connected and updated through Yast2.
[Code]...
I have a Kingston DataTraveler 112 8GB USB drive, and when i load openSUSE on it and slap it into my laptop (that is running Fedora 15 with no problems), i get this:
Code:
SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al
ERROR: No configuration file found
No DEFAULT or UI configuration directive found
boot: _
I have tried the 4.7 GB DVD image, and the KDE Live CD, and both shows this. Also i tried UNetBootIn (is that what it's called?) and it's the same too.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
I've Googled myself silly and I cannot find a dang thing on how to install. I've got a Dell Dimension 4700 with the Emuzed TVT3 Dual TV Tuner, and I've dual booted with Mythbuntu for use with MythTV. Though I have been unable to find any way to install the capture card. I have gone into the settings (and even after reading the wiki), I'm not 100% sure what to select. Not to mention, where it says probed, it shows failed to load.
View 4 Replies View RelatedSo after a win7 wubi install, I updated through system update. Now after I choose ubuntu in the win bootloader it takes me to a grub screen. How can I boot into linux and remove grub? (This isn't my computer otherwise I would dual boot and let grub take care of it).
View 5 Replies View Related