Ubuntu :: Gnome-power-manager Patch 9.10 On Dell Mini 10v?
Jan 11, 2010
I'm running Karmic on a Dell Mini 10v (Intel Atom) netbook, generally with very few problems and I've been happy with it. Recently I've had problems with suspend and wake when I close / open the lid - wicd no longer finding any networks, password prompt no longer appears, that sort of thing. A few days ago an icon popped up in the panel which appeared to do nothing, but mousing over it provided the following message:
"Session active, not inhibited, screen idle. If you can see this text, your display server is broken and you should notify your distributor. [URL]..Following the link, the blog of Richard Hughes appears to quite carefully describe the issue and then provides a patch (or two). However, being rather a n00b I have no idea what to do with either of the blocks of code he supplies - "man patch" in my terminal brings up "no manual entry for patch".
View 3 Replies
ADVERTISEMENT
Apr 11, 2011
Yesterday when I went to boot my netbook "Dell Mini 9" into ubuntu, I got an error of. Install Problem! Gnome power manager. I've tryed the following Code: sudo apt-get remove gnome-power-manager --purge Then Code: sudo apt-get install gnome-power-manger but did not work, is there anything which I can do, and can still keep all my files, as I've got impotent course work on there.
View 1 Replies
View Related
Apr 25, 2010
I am having issues with Gnome Power Manager. My wife and I have identical computers, with Linux Mint 8 installed on both. My Linux Mint 8 is a fresh install, whereas her's was an upgrade. Anyway, when I click suspend or hibernate nothing happens, not even an error. On my wife's computer this works just fine. sudo pm-hibernate, sudo pm-suspend, and sudo /etc/acpi/hibernate.sh do absolutely nothing.
[Code]...
View 3 Replies
View Related
May 3, 2010
On my login-screen, there is a message saying that the configuration defaults for Gnome Power Manager have not been installed correctly. I can still log in and work normally, but it seems to me that the system is pretty slow (which might or might not be because of this). It's been there for a while when I used version 9.10, but didn't disappear when I updated to 10.04. I searched for other threads with this problem, and found:
1) This one:URL...saying that it could be because the root drive was full, and said that I could run "sudo apt-get clean" to try to solve it. This didn't work, and it doesn't look like I'm low on space, anyway. Plus I can log in normally, so it doesn't look like the same problem.
2) This one: URL....advises me to run "sudo dpkg --configure -a", which seems to have worked for other people, but it didn't help me--when I restart, I still get the same error message.
View 1 Replies
View Related
May 9, 2010
Gnome Power Manager has been giving me problems for a while now, all of which I have at least found a workaround, (sudo gnome-power-manager) with the exception of this one.
Gnome power manager will not make my computer suspend or hibernate on low or critically low battery.
I've installed acpi, configured laptop-mode, and edited the values for GPM in gconf-editor to suspend at 10% battery.
Nothing seems to work.
View 1 Replies
View Related
Jul 26, 2010
System: Ubuntu 9.10, upgraded from previous versions
Architecture:64 bit
Filesystem:EXT4
DE:Gnome
Occurance of the problem: After using GParted to move unallocated space to a ntfs-filesystem. Yep. I did it again. No oops this time, for I have no clue why this error appeared and why I cant get to my desktop. No recent updates that couldve borked the system.Lately I have had to work quite a bit with some Windows-only programs, and I found myself out of harddisk space pretty soon, as for the last year or two, I worked almost exclusively with Ubuntu and only had a minimally sized partition set up for Windows. I needed room. No problem, I thought, I will start up GParted, move some of the unallocated space to the NTFS partition and be done with it. I have performed tasks like that before, so no problem should occur.
After rebooting I got to the grub menu. All options were there. Looks nice. Except for the fact that Windows did not want to start, some MSDK (sorry, did not write down the name) file or whatever was missing. (I heard this is a Vista problem and the file connected to the error does not even exist on any XP system). Worse than XP not starting was the error message I got from my login screen.
"The configuration defaults for gnome-power-manager have not been loaded. Please contact your administrator."
So I did. I talked to myself and had to admit to the user that I did not have a solution at hand. User upset, administrator too. (They are no longer talking to each other.) Login is accepted, but after that nothing. Just a black screen with a mouse-pointer that can be moved around. Nada mas. Before getting to the login screen, there was something else that drew my attention, but again, I did not know what it meant. The error-message:
fsck from util-linux-ng 2.16 is udevd [527]: NAME: "%k" is superfluous and breaks kernel supplied names, please move it from /etc/udev/rules.d/51-hso-udev.rules:124
* stopping the Firestarter firewall...
9.10: clean, 467963/3055616 files, 8323370/12205383 blocks
[code]...
SuperGrub. It allowed me to boot, but thats it. No further steps taken, if only because SuperGrub does not support the EXT4 filesystem (yet?).I have heard people were able to get to their desktop after receiving this error by using a root account they had previously created. I dont have one, so that would not work.So, I did the three finger salute, stopped the gdm from the terminal, moved gconfd to somewhere else, hoping a new file would be created and the problem would be solved with that, but no. Restarted gdm, it worked but the problem remained.
Ok. Perhaps a reinstall of the GDM might work, I thought. Well, it might, but the problem is I have no internet connection and the usual way I connect my laptop is through phone-tethering. Not having a desktop will not allow me to make a connection.So, sudo apt-get --reinstall install gnome-power-manager did not work as an active connection is required. Also I dont know if that is going to solve the problem.So now I am in the dark. I have booted up a live CD, mounted my HD partition in order to check my /root/.Xauthority, but I could not even find the file.
I refuse to believe there is a serious problem with my Ubuntu install. As far as I can see, there is a problem with some config-files but the system itself looks OK. Reinstalling is preferably not an option, as I love my install and have been working with it for a long time now, with lots of user data on it as well. Also, I have not seperated /HOME, which makes a reinstall a bit of a drag. I am certain there is an easy fix somewhere, someway, but I would need some advice from someone more knowledgable than I am. The only thing I could think of is to find a way to reinstall gnome-power-manager without an active connection. I can download the .deb file with some other device than my laptop but I would not know how to add that to /etc/apt/sources.list. Also, I kind of doubt that the problem lies within a faulty power-manager.
View 2 Replies
View Related
Sep 5, 2010
I'm running 2.6.35 on a macbook Air. Since Hal is being deprecated I got rid of it but now I cannot control brightness with the keyboard.Looking at the code on gnome-power-manager, if it doesn't find hal it defaults to xrandr, but I couldn't find a way of controlling brightness with xrandr. Also, I don't see any keybindings on XF86MonBrightness{Down,UP} with gnome-keybindings-properties.I'm loading mactel's nvidia_bl module which creates /sys/class/backlight/nvidia_backlight and from there I can just adjust brightness by editing the corresponding file.
View 1 Replies
View Related
Sep 10, 2010
After running a backup script, but previously deleting old downloads and files from the rubbish bin, I then logged out. When logging back in later I got the Ubuntu loading screen as normal, but then instead of the Ubuntu login I got another login screen that I have not seen before; black background with the login screen in the middle.
I tried to login in, but all I got was an error message saying 'Install problem - The configuration defaults for Gnome power manager have not been installed correctly. I am running Ubuntu 10.04 and had a stable system.
View 1 Replies
View Related
Mar 22, 2011
Have not been installed correctly.
This message comes up as I am logging into my account. Upon entering my password it goes back to the logon screen.
Booting into recovery mode and different kernels doesn't help.
View 2 Replies
View Related
Mar 4, 2010
Things were running fine until GNOME misbehaved;
GNOME failed to load telling me:
Install error, Configuration defaults for GNOME power manager have not been installed correctly.
So I
Code:
To the shell and check the logs in gdm and find this:
Could not ask power manager if user can suspend, launch helper exited with unknown return code 0.
So I try
Code:
To see if another user will get the desktop; I get the error
Cant create etc/passwd no space left on device.
So I
Code:
And get the following
I insert a usb drive to prepare for back up; Run
Code:
On the shell to get the usb device name; Then run
Code:
To mount the device.
I end up with:
Cant create lock file /etc/mtab~ 4610 No space left on device(use -n flag to override)
So, I
Code:
And see 9 partitionitions
Code:
Again to check which ones are loaded at boot up time and get
plus some other file systems mounted at boot up, but not mapping to any physical partitionition.
I try
Code:
On partition9 and get warnings because its mounted, so I chicken out and try
Code:
And run into the error:
cant create lock file /etc/mtab~4832 no space left on device (use -n flag to override)
Good thing is there is a
Code:
Since space is a problem, I
Code:
On partition6 which is not mounted at boot up time and try to
Code:
I still get the error
cant create lock file /etc/mtab~4735 no space left on device (use -n flag to override
Code:
For package update tells me
cant open /var/run/zypp.pid in mode w
Code:
For power management tells me its not even recognised as a command.
View 3 Replies
View Related
Oct 29, 2010
It's all in the title : the network manager & power manager applets don't start automatically when I open a new GNOME session, although they are checked in the "startup application" dialog...
View 7 Replies
View Related
Jul 17, 2009
Recently when I booted up my computer I get an error at the login screen.
"Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."
When I try to login in, nothing happens. I cant seem to get past the login screen.
View 11 Replies
View Related
Apr 21, 2010
gnome power manager judges the system inactivity by the CPU usage (as well as the input device usage). In other words, it goes to sleep mode when the CPU usage is lower than 5 % for dozens of minutes set by a user. I'm just wondering the reason why 5 % of the CPU usage. Isn't it possible for user processes to be working with under 5 % of the CPU usage?
View 2 Replies
View Related
May 20, 2010
I use Slackware 13.0 with the 2.6.33.2 kernel, and I use GnomeSlackbuild.I tried to get help on their discussion group, but I didn't get any.I'm trying to build gnome-power-manager 2.30, because it uses the new upower interface (so it seems). I have GTK+ 2.18.9.
View 3 Replies
View Related
Jan 12, 2010
My Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies
View Related
Feb 12, 2010
Laptop Acer Aspire 6930, Ubuntu 9.10 (Mint.
When I switch my laptop on when it runs from a battery, gnome-power-manager shows that it works from AC. It is enough if I really plug AC in and unplug it again, than g-p-m knows it works on a battery... It is frustrating when I want to use the laptop on the go, it doesn't know when battery is going to die.
View 3 Replies
View Related
Oct 10, 2010
I was using simple backup config to backup home to an external drive and it was working fine for the past week or so and today after the backup the computer was restarted and I am unable to log on. I get an error message saying. "the configuration defaults for gnome power manager have not been installed correctly "
I did some googling and the problem is that / is full. I have been trying for the past three hours to delete some space on / so that I can log on. I used ctr-alt-f1 and I can log on there but whatever command I use to delete the root trash it fails. I get an error message saying /root/.local/share/Trash/files/ is not a file or directory.
delete root trash so I can log onto this computer. I have used every variant of sudo rm -r /root/.local/share/Trash/files/ that I could find including one using Chmod. I have already tried the commands found in this tutorial [URL]
I also reinstalled gnome but that did nothing.
View 4 Replies
View Related
Dec 5, 2010
even after applying the patch from this thread [URL] my battery is still not displaying an icon and a tab is not present on the power manager. I use an ibook g3 dual usb. though i didn't restart after applying the patch as it was not mentioned to do so.
View 1 Replies
View Related
Feb 26, 2011
One day I was using Gparted and following this I rebooted and had this came up
"Install problem! Configuration defaults for Gnome Power Manager have not been installed correctly. Please contact your computer administrator."
Initially from reading the forums I figured it was because my Ubuntu partition ( I dual boot Windows 7 and Ubuntu 10.4) filled up for some reason.
I used a boot CD and cleared some files in /media. It seems like I kept about 17 GB of backups there for some reason.
The problem is that even though I cleared this out, I still have the same message.
I could just reinstall, but I want to try to keep my data for once, especially my virtualbox harddisks, unless someone can suggest a way to save it and reuse it.
View 2 Replies
View Related
Feb 27, 2011
I just tried to start up Ubuntu and got the following error message. "The configuration deaults for gnome power manager have not been installed correctly. Please contact your computer administrator."
I then get a black screen, with the menu bar at the bottom, and a choice of who to log in as. No matter who I choose I get the same error message and then it takes me back to the same screen. It also gives me the choice of what session to use but again, no matter what I choose it just takes me back to the error message and the same screen. I am running Ubuntu 10.10 on an Eeepc 901. I have the Netbook version installed, but I was using the desktop session. The last time my computer worked I ran update manager and it updated some Intel driver i think. Sorry I can't remember the exact details. Not sure if this is something to do with it.
View 1 Replies
View Related
Jun 3, 2010
I've noticed g-p-m refreshes information extremely delayed. Sometimes it takes many many minutes before it notifies me that I'm running on battery. how I can change this refresh rate? I've drained the batteries once recently believing the icon that said 89% less than a minute before the batteries were completely discharged (my battery lasts for about 15-20 minutes).
View 6 Replies
View Related
Nov 11, 2009
I'm running 10/11 on a toshiba satellite. i kinda got tired of loosing stuff because i mis-timed the battery discharge, so some months ago i pulled the battery and just ran on the adapter (back ground, i don't know if it's nothing, related to, or caused the problem).
monday morning fired her up - boom got the power "gnome manager not installed correctly"message. tuesday, googled gnome then power then... you get the route, and found Fedoraforum.org, read the stuff, did the yum remove...., did the yum install.... everthing seemed cool. 2nd reboot she stopped at the "f/infinity/balloon" kinda logo.
i went to verbose startup and - all sorts of services were failing; the word deprecate(d, ing, tion) came up a lot "device full..." came up a fair bit as well. when i tried the "yum remove" approach again i got [rpmdb: write: 0x1fd48b0, 8192: No space left on device]. similarily on "yum install" same kinda stuff - deprecation, BaseExpection, deprecated..... kinda long winded. up till now (13 years)
View 14 Replies
View Related
Aug 8, 2010
I have upgraded my netbook system to lenny. I got almost every thing working right except gnome-power-manager shutdown event. It shows critical battery level (red color) on its applet on the panel but it does not do the normal safe shutdown action. Instead, it just do a sudden shutdown of the system which causes the lose of some data. Is there any way to solve this issue using lenny's current version (2.22.1-4)?My netbook is AcerOne.
View 1 Replies
View Related
Oct 26, 2010
After trying to backup my hard drive on my HP Mini 210-1054TU notebook PC, On start up the users menu comes up (A little changed) and when I sign in it comes back with a window flag that say: The configuration defaults for GNOME power manager have not been installed correctly.I can booth with a stick and see my files and directory but, I am not allowed to open any. There is no access to a terminal or anything but, the users menu. It appears to take the password as, if not right, it would say so but, only comes back with same menu and window flag.Ironic, I was trying to backup my files so I would not lose them.
View 1 Replies
View Related
Dec 7, 2008
I am using fedora8. I suddenly noticed that the gnome-power-manager icon (battery icon) has gone missing from my panel. How can I get it back ? I donot see it in the add to panel list so it must have got uninstalled somehow, isn't it so ?
View 4 Replies
View Related
Jun 23, 2010
I've tried to research my issue as best I can before posting here. System is 10.4 32bit on Acer Aspire 5720. Here's the chain of events: First noticed Firefox couldn't create a file under /tmp to download Virtualbox. Hm. Try to reload Firefox, it won't restart; freezes with one tab open, blank with transparent square in top-left, not a chrome loaded if I remember right. Both latest stable and Dev Preview. Maybe a reboot will work...Normal Ubuntu loading screen appears, but before anything else a message box appears near top right of screen: Quote:
Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly. contact your computer administrator. Shortly after, an abnormally styled pop-up appears asking me for my default keyring password - seemingly skipping the account login step. When I put in the keyring and click 'Ok', the button stays pressed down and the system hangs. Have to switch off. Boot into recovery mode, root with networking. I read somewhere that "dpkg --configure -a" followed by "apt-get -f install" might help. However, "dpkg --configure -a" fails thusly:
[Code]...
View 3 Replies
View Related
Oct 13, 2010
I have upgraded my EeePC from 9.10 to 10.04 and got now a black screen after I can login. On the right upper corner, I find an error message:
Quote:
Install problem!The cnfiguration defaults for GNOME Power Manager have not been installed correctly. On the bottom bar I selected English / USA / GNOME for Language / Keyboard and Session Above is the best I ever could come, but most of the time I only can type in the password, and it stops there, without bottom bar (language/keyboard/session), but with the Error.
View 9 Replies
View Related
Nov 19, 2010
I decided to upgrade my Asus Eee 900 from Lenny to Squeeze, to fix some issues that I was having. I did a fresh install using the beta1 netinstall cd image, and now my system is mostly working as I'd like it. Overall it seems quite good, and it even boots much faster than it did with Lenny.
I've encountered a problem, though. The suspend key doesn't work. I installed the package 'hibernate', and now the system can suspend via a command (which seems to work properly, although I haven't tested it extensively). I've noticed that the squeeze system doesn't have a command that my other Lenny systems do, 's2ram'. And I've noticed also that a package, uswsusp, which seems to be related to this kind of thing, can't be installed because it's not in the repositories: Package uswsusp is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'uswsusp' has no installation candidate
View 10 Replies
View Related
May 19, 2011
Despite having the Gnome Power Manager set to put the display to seep after 30 minutes, it always happens after 5 minutes. The display will go blank but still lit, and then it powers off after the 30 minutes. Surely, if I set it to 30 minutes, the display should power off then, and not just blank after 5? I have no screensaver packages installed so it's nothing to do with that.
View 2 Replies
View Related
Nov 19, 2009
My monitor kept powering down after 20 minutes so I installed Gnome-power-manager by yum so that I could change the settings. After the installation and every time I try to use it I get a message saying:
Quote:
Install problem!
The configuration defaults for Gnome Power Manager have not installed correctly. Please contact your computer administrator
I'm now unable to effect a change in the power settings and the display keeps turning off.
1) Is someone able to post their config file from a working F12 install? I believe it's /etc/dbus-1/system.d/gnome-power-manager.conf but not certain as I don't have one ;-)
2) ~/.gconf/apps/gnome-power-manager/%gconf.xml is empty - is it empty for someone with a working install?
3) how I can change the power settings without the gui - I'm googling on this point and will post the answer as and when I find it.
Code:
[ecvej@desktop ~]$ uname -r
2.6.31.5-127.fc12.x86_64
Edit: In case it is relevant, this is the contents of my /etc/gconf/gconf.xml.system/%gconf-tree.xml
[Code]....
View 2 Replies
View Related
