I've recently bought a Canon EOS 550D and would like to make it work in digiKam. Although it is in the list of the supported camera, when I want to import photos from my camera I get stuck because apparently it is not recognized correctly (the import starts, but a message saying "failed to connect to the camera appears".The camera works fine with other softwares like F-Spot and I can browse into it using nautilus.
View 1 RepliesI have two computers running Kubuntu 9.10 (using the upgrade paths from 8.04 and so on) one running 32bit and the other running 64 bit and I have the following problem: On the 32bit version installing the repository package for Digikam, everything works just fine. On the 64bit version I have two problems:
First digikam won't start due to the following error:
digikam: symbol lookup error: /usr/lib/kde4/digikamimageplugin_freerotation.so:
undefined symbol: _ZN7Digikam11ImagePlugin17setActionCategoryERK7QSt ring
I'll have to delete all digikamplugin files from /usr/lib/kde4 and then it works from the command line. It appears that everything is working as it should.Second, starting digikam from Lancelot does nothing.
Digikam will not rotate images. Worked fine in all previous versions. Tried installing 1.3 from this repo
Index of /repositories/KDE:/UpdatedApps/openSUSE_11.3
per this thread
opensuse - exif and gwenview
but 1.3 failed to launch.
De-installed 1.3 and re-installed 1.2 from release repos.
From reading the above thread perhaps a patch will soon be released?
I cannot connect my Canon 20D to my Ubuntu partition. It connects fine under Windows.
View 6 Replies View RelatedI am trying to get photos off my Canon PowerShot SX130 IS and its seems to not connect correctly. Ubuntu 10.10 x64
View 5 Replies View RelatedWireless issue with printer.Can't connect wirelsess to printer(Canon MP640).Running Ubuntu 10.4 in 64 bit mode.I am able to connect with my small home network and INTERNET is running OK.When I try to add a printer,I just do not know enough.Also,cannot find suitable driver.
View 3 Replies View Relatedin linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies View RelatedI recently got the printer part working by downloading from canon the correct rpm also in doing this I got the scanner driver. My computer tells me it is installed but I see no program to connect with my scanner. There is nothing in xsane or simple scan to allow me access to the scanner.
View 5 Replies View RelatedDell mini 10 with ubuntu 10.04/windows xp, connecting to linksys wrt54g. Connected when I was using 9.10, has worked for several months since 10.04 was installed. Still works if I boot XP, but, when booting Ubuntu, router won't accept the passkey which I obtained from my wired computer. I've glanced through a bunch of posts and see several which are close, but no solution. Only cause that I can think of might be a shut down while connected. I say that because it was working and I had no need to change settings.
View 5 Replies View RelatedThe nm-applet starts automatically as it should, and also tries to connect to the local, wireless LAN, but always fails its first attempt. If I click the icon and ask nm-applet to connect again, it always succeeds.
The server, running the wireless LAN, never sees the first attempt to connect, so no wonder this attempt fails. But it would be nice to make it succeed!
I have an Atheros AR242x card. It can see my wireless network (WPA2). When i attempt to connect to the network it asks for the WPA2 passphrase. After entering the password it begins connecting but hangs up for about 3 minutes before saying wireless disconnected. The wireless worked for one day on a fresh install (Ubuntu 10.04)and then started doing this.
View 2 Replies View RelatedMy Realtek RTL8187 Wifi fail to connect using WPA security. The authentication window shows up repeatedly every time I try to connect. Please note the password is correct. I searched and haven't found a conclusive solutions as of yet.
View 1 Replies View RelatedHas anyone else experienced a failure to connect to a mobile network. I have root access wireless tether on my Droid X and I can't seem to connect to it. It times out. My buddies windows box can, and his Iphone will as well. I can see the network just fine, just no connection. Tried changing frequencies as well. And restarting both the phone and laptop.
View 3 Replies View RelatedA friend called me today and he explained to me that after his ubuntu install he was unable to connect to a wired Ethernet network. He says it trys to connect using ETH0 and then seemingly fails and disconnects. I have him run a if config and send me a pic. The very odd thing about it is He had a lot 5-8 INET6 address? The laptops is Acer extensa 4420
View 1 Replies View RelatedUbuntu 9.10 comes with rt2870, the driver for my Zonet ZEW2545, and I have had to blacklist rt2800usb in /etc/modprobe.d/blacklist.conf in order for rt2870 to work. My network adapter is able to attempt to connect to my router, but after 10-40 seconds it tells me I am disconnected again. This adapter works fine on windows.
View 1 Replies View RelatedI'm running squeeze/testing. Two or three days ago I became unable to get my mail from pop.gmx.net. A bit of investigation and I found that the error message I was getting was: "could not resolve pop.gmx.net: Name or service not known". Now the funny thing is that I can ping, traceroute, or nslookup the site successfully. Telnet, rlogin and ssh give the same: "could not resolve pop.gmx.net: Name or service not known" error message.
I have tried using the IP address instead of the pop.gmx.net and everything works fine. There is no issue with connecting to pop.gmail.com on the same port. Obviously there is some cache somewhere with a messed up pop.gmx.net. Any idea as to how I can track this down?
I have Fedora 14 And MTS MBlaze Mobile BroadBand Connection And its USB MODEM
in order to use usb modem
we use 3 packages
ie
1. usb_modeswitch
2. usb_modeswitch_data
3. wvdial
i have configured wvdial.conf put the req [Dialer Defaults] its behaving perfectly normal it runs the script everything is fine even shows various IP's DNS however when i open Firefox it dose not work.
I'm trying to find out why the wireless access point at work most of the time won't let me connect to the network. I'm using Ubuntu 10.04 on a DELL vostro 1720. The router model is D-LINK DIR-655. lspci gives me: Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01), and I'm using Broardcom STA drivers.
If I try like 10-20 times to connect I will often finally get connected and once connected everything works fine for the rest of the day. The only router I'm having this problem with is this one. In the log below, the last lines is a connectionattempt that succeeded and all the lines above those are several attempts that failed. It seemes like there is some kind of timeout issue but I'm not sure what and how to fix it.
The syslog for the connection attempts are (I have marked out MAC adesses and public ips with *):
[Code]....
Dell Inspiron 640m laptop, running 10.04. It previously connected via wifi & now fails to connect, although the wireless indicator shows a connection. Connection via ethernet works. Below there's some information that looked like might it be useful to diagnose the problem based on other posts in this forum.
[Code]....
I finally have my system to where I can connect to proftpd but my uploads fail. I think my problem lies in the upload folder. I do not really understand where to put it. Will someone look at this config file and tell me where to put it and what I need to do to get it working. A basic anonymous configuration, no upload directories.
[code]...
I've tried out many Debian distros and noticed the ones that I try based on Ubuntu, my USB WiFi adapter works fine and I don't really have any issues. When I try one that is based on current Jessie, I have sporadic WiFi issues and just overall instability with regards to connectivity and audio playback. I have tried two distros based on Jessie and had very similar results on both. Is there anything in particular I can try? I've done everything short of installing Debian stable and just pointing to Jessie. I've done that in a VM so I know I can handle it, but wanted to se if there was anything I should be trying first. I just didn't think a distro based directly on Jessie and Jessie backports would be any different from installing base Jessie as far as compatibility is concerned.
Code: Select allCard-2: Realtek RTL8191SU 802.11n WLAN Adapter
driver: r8712u usb-ID: 008-004
IF: wlan0 state: up
I have been trying to connect to my University's VPN Server and for some reason vpnc fails. I have configured the vpn settings the same way I did for the past two years. They worked properly on Fedora 12 and 13, but for some reason fails on Fedora 14.
Code:
Jan 6 16:45:20 exodusprime NetworkManager[1269]: <info> Starting VPN service 'vpnc'...
Jan 6 16:45:20 exodusprime NetworkManager[1269]: <info> VPN service 'vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 11731
Jan 6 16:45:20 exodusprime NetworkManager[1269]: <info> VPN service 'vpnc' appeared; activating connections
Jan 6 16:45:21 exodusprime NetworkManager[1269]: <info> VPN plugin state changed: 3
Jan 6 16:45:21 exodusprime NetworkManager[1269]: <info> VPN connection 'Swinburne University VPN' (Connect) reply received.
code....
Since my update to OpenSuse 11.2 knetworkmanager refuses to connect to WEP enabled networks (worked fine with knetworkmanager 11.1). I am sure that I use the correct password and I tried on 3 different networks. The manager is connecting to open networks and WAP protected networks without problems. I saw on other forums that there were similar problems with previous versions of networkmanager. But I could not find a solution for my problem.
View 9 Replies View RelatedIn all but one place my HP Pavilion laptop running Fedora 14 will work flawlessly to use the Internet for e-mail, ftp, http, etc. In one network there is a wireless router - Cisco/Linksys E3000 - that allows every computer to use the Internet normally for wireless or for wired connections, every computer but mine. If I use Google's Chrome I can access the Internet. I can ping any web site too, but the moment I try to access anything with Firefox 3.6.17 there is a long delay and the standard error page appears. Weather or not I use a wired connection is apparently irrelevant.The Windows 7 computers in the same network are free of this curious problem. Strangely I have noted a problem like this, possibly the same problem, with another network at a coffee shop and they both share the misfortune of using AT&T, which is proud to not support Linux ... for customers of course (it's good enough for themselves I'm sure)
View 3 Replies View RelatedAnnoying problems I have with Yast2 Software Management?
1. Sometimes when starting Yast2 Software Management it fails to connect to the SW repositories. It happens inevitably (i.e. without exception) at the first attempt after a fresh boot up, and sometimes otherwise. I can only retry or abort, and retrying usually brings no success anyway. Is it perhaps due to a time-out somewhere?
2. If I click on the 'abort' button (see above) or 'cancel' in Yast otherwise, I inevitably (i.e. without exception) get the following type of error message
Code:
** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
(sometimes only 2 identical lines of error code)
I am running OpenSuse 11.3 with Gnome.
I'm pretty new to Linux, but have had a bit of functional tutoring. i'm triple booting my old Dimension 8400. Have been running with Jackalope and XP for some time now and wanted to install Lynx and get a good handle on it before i completely wipe my other machine (Win7/Jackalope) and install it there.
Installed Lynx from a USB stick and all seems well, it recognises the UBS wireless and all available connections but just sits and spins on the password login and never connects...hmmm. I have tried all possible combinations of rebooting with the USB connected/disconnected/connecting after... to no avail.
The wireless seems to "work out of the box" just as seamlessly as it did for Jackalope, all the steps are similar, it just never connects.
I have a Lenovo S10e netbook running a pretty clean version of 32bit opensuse 11.4, with very few standard patches since I installed it all those moons ago. The problem is that firefox cannot connect to the internet, the odd bit is that skype has no such problems. Are there any network related functions that that typically go screwy that might cause such a problem? The netbook really hasn't been used much for tinkering to have 'accumulated' a problem, but I'm about to give it to the extremely non-technical parents in law and cannot have it misbehaving, especially not as they are in a different country.
View 8 Replies View RelatedDell Studio 1735 w/BCM4312 WEP fails to connect even though I'm using the 10 character HEX key. It connects fine when there's no security on my Linksys WRT310N router. Ubuntu, Windows 7, my Samsung TV and TiVo all connect fine with the 10 character HEX key, but with opensuse 11.4 I can't connect.
Code:
lspci -nnk tells me I've got:
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
Kernel driver in use: wl
[Code]...
i'm happy ubuntu 10.10 users with macubuntu installed but again i'm almost a novice i would like to install digikam i read it's the best photo organizer under ubuntu software download i type digikam but did not found
in this page there are 6 download[URL]..but i don't know the differents between them.i got 32bit system with 4gb should i enable the swap file to run digikam faser?
A lot of people have been waiting for Digikam 2 since quite some time. The final release was made on 31/07, but now I am wondering how to install this on Ubuntu? I searched for it but could only find one thread: [URL]. This does not work for me, it only installs Digikam 1.9.
View 7 Replies View Related