Trying to switch to Linux but thing is can get to connect to internet. got my driver installed with the wrapper. Found a unsecured connection to dynex rounter. trys to connect then says not connected UBUNTU is what im using connection works using windows.
View 2 Replies
I have installed linux 10.10 and i want to connect internet through USB Bsnl EVDO modemprocedure/commands to connect to internet
View 5 Replies View RelatedOn this box I have Two seperate Ubuntu installations. Recently in both I seem to be having the same problem. I initially can connect to the internet as per normal and use any internet application. But after a period of time, sometimes just minutes, sometimes hours, even though the icon says connected, I cant update pages or send emails etc because there is no actual connection. My Physical connection is good I know - My Ubuntu laptop and Windows gamming PC connect fine during this period. So
Does this suggest an intermittent hardware fault or is there some thing in Ubuntu I can check to make sure that it is setup correctly and nothing has been corrupted? I am a lay PC person - I dont really want to be command prompting - Plug & Play and Point & Click is my limit.
After upgrading to Ubuntu 10.04, I'm not able to make any connection to the internet with either my netbook through WiFi or my computer on wired LAN. I can, however, ping my Solaris machines and Macbook. How do I fix this?
View 9 Replies View RelatedI tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies View RelatedI am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies View RelatedI had put my computer on standby and when i restarted it, it powered off within a few seconds. I turned it back on and after that i've lost connectivity to internet on Ubuntu 10.04.
However I have VMware (XP) installed and internet/network works on that. I'm a newbie with Linux.
Here are some outputs:
I have tried to edit the connection using System>Preferences>Network Connections. I entered manual settings for IPV4, but whatever i enter there, it doesnt get reflected when i type ifconfig in the terminal window. I tried setting it to Automatic DHCP as well. Doesnt work.
I installed Suse 11.2 on clean HD. I cannot connect to the internet. Seems like Suse didn't install drivers for on board ethernet card. It is a Marvell Yukon 88E8056. I'm new to this and don't know how to install the drivers.
View 3 Replies View RelatedI use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
I've recently set up a local development webserver using Karmic Koala. I downloaded and installed the server version of Kubuntu and have the web server working.
The problem is that for some reason, I'm no longer able to connect to the internet. I can connect to my router, and other machines in my network can VNC into the server.
I'm using an wired connection to the router and have the server set up on an internal IP of 192.168.0.100. I used to be able to connect to the internet, I downloaded and installed a load of packages etc before it stopped working.
The last thing I remember doing before it stopped working was that I installed Samba so I could share files with the other machines on the network (two Macs running Leopard and a WinXP laptop).
I got the share working - I copied a load of files to the server via the share, rebooted, and for some reason now I can't connect to the net (and other machines can't see the Samba share either.) However I can still VNC into the server.
When i boot my computer and open ubuntu version 10.04.1 the internet wireless connection i have connected automatically. Now, for one reason i don't know, the internet did not connect to the internet. The progam display a message to uncheck the checkmark in the File Menu. After doing this, i refresh the system but it still not connect.
View 9 Replies View RelatedI have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
I'm trying to connect to the internet on ubuntu, but what ever i do fails. I've tried every thing i possibly can, and when all else failed, i had to come and ask. When i try to connect to the internet, it always says "unable to connect". I have no clue why. I'm choosing the default wired setting. To the side of it, it says never, so that might be the problem?
View 3 Replies View RelatedI have just installed Ubuntu 9.10 and like what I see. However I cannot connect to the InterNet. I cannot type @, instead I get " so no way of entering my name for my ISP
View 1 Replies View Relatedi have desktop computer with ubuntu 9.10 no wireless but with Ethernet card and i have my laptop dell with wifi witch is connected to the internet running on xp, i would like to connect my desktop to the internet thought my laptop using a cable between them, so i connected them and entered ip an subnetmask for both of them for the ethernet and enabled 1-"allow other network users to connect through this computer's internet connection" 2-"allow other network users to control or disable the share internet connection" on my laptop (windows xp) and every thing seams ok connection wise bet when i start firefox on ubuntu (desktop) it gives address (on any site) not found as if there is no connection. but on both PCs the local area network in connected ok!!?
View 2 Replies View RelatedI just installed Ubuntu for the first time and I'm having some problems with my Internet connection in Ubuntu. I have a wired connection; I also have a router connected, but this computer gets access directly through the cable so I doubt this matters.So, as I've said I cannot connect to the internet. When I click on the Network Manager (is that how it's called?) I don't have any networks listed under "Wired Networks". However, if I run Ubuntu from the disk I can connect to the Internet; I also had access during the installation.
View 3 Replies View RelatedI recently installed Ubuntu on dual boot with my win7. I am able to configure my home network, it shows up, however i get no signal and can not connect to the internet.
View 6 Replies View RelatedConnect to the internet on Ubuntu? I am using wlan (wireless connection). But you see, I can't connect for some reason. It won't show any networks and there is a ! on the connection sign thing. So I open up to see my drivers and- there are no drivers. Do I need some drivers? How can I download them? Or if not, what do I need to do to connect to the internet?
View 6 Replies View RelatedI have downloaded the version 10.10 and started the system but can't connect to the internet. I am using wireless and not sure how to connect to the wireless.
View 9 Replies View RelatedI downloaded ubuntu 10.04 live cd. I can't connect to the internet. I'm using a EQ-660R Modem,with ethernet. Is this supported?
View 9 Replies View Relatedi cant connect to the internet with backtrack. set up my wireless card so i can connect?
View 2 Replies View RelatedI downloaded few updates yesterday and installed them, but i didnt reboot and the wlan worked fine, but after restarting the system it didnt find any wlan connections, so i rebooted, tried rebooting modem and using lan but nothing worked. i know the wlan and lan is working becose my desktop computer and ps3 are working fine. So what should i do? Do i need to do system restore, reinstall or what?
Is my computer model badly supported, as i also had problem with 9.10 install, it complained about bad sectors and crashed, and even low level format didnt find any bad sectors!!
Computer model is: Fujitsu amilo m7400 FB21
Im not sure about the wlan system but its built in and doesnt need any cards. Only problem i have ever had with wlanwas that it couldnt connect password protected wlan.
I am new to ubuntu,
my network connection is using a proxy, I have edited the FireFox preferences and set the proxy connection parameters, and could connect to the Internet,
But not via the Terminal,
when I am using the command : wget http://......the link I am trying to download....
I got an error, as the Terminal can not connect via the proxy, in another word to use the proxy parameters.he proxy !
The ssh server I have at home is accessible from other computers on the LAN. However, on if I try to connect to it from another computer outside the LAN, I get a publickey error saying 'permission denied'. I use key based logins. I have set up port forwarding on my router and the funny thing is that the current configuration worked just once. Here is the output of ssh -v
Code:
foobar@IBM-Ubuntu:~$ ssh -v <ip address of server>
OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[Code]....
Not able to connect to internet
View 9 Replies View RelatedYesterday I helped my neighbor install Ubuntu 9.10 on his PC. This PC had XP with many bad viruses is the reason for the change. This is not a dual boot setup. Strictly Linux. I know the hardware is fine because DSL communications was working at the time of the install.
I've found a few threads describing problems with the Network Manager and DSL. [URL] I'm in kind of a "chicken and the egg" situation. This Linux PC has no internet connection right now and many of these fixes are downloads via the terminal. However, at my house, I have XP running and online. Can I download these fixes and copy to a flash drive and install on his Linux box?
Does anyone happen to know how to connect to a WPA2 wireless network using only the terminal ?
View 6 Replies View RelatedI have a Ubuntu desktop on my LAN that has suddenly stopped accessing the net, this morning it was working nicely. The computer DHCPs an address successfully, and it can access other comps/services on the LAN. Other comp have no trouble accessing the web.I've pinged my gateway, and I get a response, but pinging Google for example gets me a 100% packet loss.I've tried to release and renew the IP using dhclient, I've unplugged and replugged in the cable at both ends (didn't really expect it to work since it can dhcp fine), I've rebooted the switch, the router, and the comp, still I'm getting the same problem. I haven't played with any firewall settings either.
View 1 Replies View RelatedI'm just using Ubuntu for the first time, and am trying to get everything working on the Live CD before I install it. The only problem that I'm having right now is getting connected to the Internet. I'm trying to connect to my router, but it keeps asking for the WEP Key. I type it in and it pops up again a minute later. It works on Windows, though. I'm running Ubuntu 10.04 on an old Inspiron 8100 I got from a friend.
View 9 Replies View Related
