I used 9.04 for months and it work fine before restarting my PC. After I restarted my PC, the memory consumption takes up to 4.2 GB after login. However, I cannot find any process that consume such large number of memory.
[code]....
I am trying to run C++ program on linux.
My program consume a lot of memory so that the memory is used up fast and memory swap is very high.
I can find this by "ps" .
My program is long.
I need to find out which part of my program consume so much memory ?
We recovered a large number of files from a HD I messed up. I am attempting to move large numbers of files of a type e.g. .txt .jpg , into a folder by type to more easily sort through them.
Here are the commands I have mainly been trying with various edits:
Code:
Code:
So far the most common complaint I have gotten "missing arguments to execdir".
This is on Ubuntu 10.04
I need to find how many threads are alive with respect to the current process for my further processing. Is there any means to trace this number ?[URL]I referred the above link. But sys/pstat.h is not in my system. Don't know which library gives this header.
View 14 Replies View RelatedIn Linux, is it possible to know which processes consume most battery energy at the moment?
View 1 Replies View RelatedIm using SUSE, i have 31GB of memory Mem: 31908592k total, 31429632k used, 478960k free, 12176k buffers. How do I find out what process are eating up all my memory.
View 3 Replies View RelatedIs there any link where i can get information about below?
Dirty memory
RSS
PSS
One more?
if a set of process are getting executed in a use case say 50 times. How do one know the memory leak for a particular process?
I have a computer with 16GB of ram. At the moment, top shows all the RAM is taken, (NOT by cache), but the RAM used by the various processes is very far from 16GB.I have seen this problem several times, but I don't understand what is happening.My only remedy so far has been to reboot the machine.
View 1 Replies View RelatedI have had a fresh install of Ubuntu 9.10 and installed some software after that.Since third some, some process is eating half of my memory.I have checked processes running in system manager but everything is normal.Maximum is consumed by compiz which is about 26 mb, seems very normal.I did restarted my computer several times, and in the start for 5 mins, its fine after that again my cpu fans runs at very fast speed and my one cpu is used up 95 % (I have dual core).Please help me out, this invisible thing is driving me crazy.I am attaching my htop screen shot (sorted by cpu %), now the cpu is not used by completely but fan is still struggling hard and fast.
View 9 Replies View Relatedin my middle of script i am using tar command to tar some 1000 images and size of each image is 5MB.
all the images are provided as argument as tar -cvf file.tar <all images as argument>
but my tar file file.tar does not contain all the images.
I'm running 64-bit 10.04, upgraded from 9.10. The problem I am experiencing is that any user accounts aside from my main account are problematic. This includes any accounts I add, as well as the GDM guest session.The specific problems that I have thus far experienced are as follows:
1. The desktop loads often improperly. In the latest instance of this the graphics on the right side top panel were randomly chopped-up, leaving parts of my clock on either side of the volume control, among other things. 2. If I make ANY customizations to the desktop at all, the desktop takes nearly a full minute to load on log-in. 3. Flash videos don't work properly on Firefox. Sometimes they only play after refreshing a page, often they will not load at all. Also, attempting to load or play a flash video will sometimes causes Gnome or Firefox to crash. 4. (And this is the one that REALLY has me stumped) Whenever I log into my main accountant after logging out of another account, the IBus control appears in my system tray.However, when I open the IBus preferences the associated check box is (and has always remained) unchecked.Not sure where to go with this one. More than anything, the IBus bug makes me unsure of where to even begin looking for the problem.
This problem is not exclusive to Ubuntu, I've experienced it in Windows and OSX as well, but it seems that almost every time I transfer a large number of files (i.e. my music collection) between my desktop computer and laptop via my external hard drive, I end up losing files for no reason. I usually don't notice the files are missing until later on, because I am never informed of any data loss. Now, every time I make a large transfer of files, I just do it two or three times to ensure that I don't lose any files.
View 2 Replies View RelatedI've a directory containing around 2.8 lacs of files. I want to move them to another directory.If I use cp or mv then I get an error 'argument list too long'. If I write a script like
for file in ls *; do
cp {source} to {destination}
done
then because of ls command , its performance degrades.How can I do this?
I am facing problem in copying a large number of file 18 lakh (18,000,000) files from my personal hardisk to another hardisk each file is very small and size of folder is around 3.95 GB copying files using copy given by Windows is frustrating and I am not even able to compress file its giving me error that its not readable.And problem is I am not able to open this drive in Linux it showing me error there saying do diskchk in Windows and Windows disk check is also not able to repair this drive and goes into some mode unsolvable.Is there any way to open disk with error to open in Windows and if not any way I can copy data faster?ERROR: Disk labled EDU is corrupt go to windows and chkdsk /f there and reboot into window 2 times.
View 3 Replies View RelatedI have a large number of log files, on a linux box, I need to cleanse sensitive data from before sending to a third party. I have used the below script on previous occasions to perform this task, and it has worked brilliantly (script was built with some help from here :-)
#!/bin/bash
help_text () {
cat <<EOF
Usage: $0 [log_directory] [client_name(s)]
EOF
[Code]...
However, now one of our departments has sent me a CLIENT_FILE.txt with 425000+ variables! I think I may have hit some internal limit. I have tried splitting the client file into 4 with around 100000 variables in each, this still doesn't work. I'm loathe to keep splitting though as I have 20 directories with up to 190 files in each directory to run through. The more client files I make, the more passes I have to do.
I understand that chroot is usually used to provide security, however, for my issue, security is a big don't care. I am very new to using chroot and don't fully understand how the chroot'd env works.
problem: Trying to use a vendor supplied cross compile environment. The environment runs as a chroot'd env and works just fine. I have a large number of additional modules that I wish to compile in the chroot'd environment. FYI, these modules are also (succesfully) compiled for other targets not using chroot'd env's. Copying the source files into the the chroot environment is not an option (don't have hours to wait for copies to finish and it would break the make system). Having them live in the environment is also not an option (the chroot build is a tiny part of the build process and we cannot revamp our entire source tree to accommodate it).
I am looking for a way to have the compiler in the chroot'd env have access to a path that is outside of the env and typically higher up in the same path that holds the chroot'd env. I have tried soft links (they don't work as expected). Hard links only work for single files and there are 10's of thousands of files that would need to be linked. I am not sure how I would go about exporting the additional files and then mounting the exported files in the chroot'd env (or if that would even work).
I have a 50000 line(ish) set of records in a file. I have another file where I have filtered out all the line numbers for those which have an error of various types. e.g column count, field type etc. I want to get all those lines into a separate file so I can sanitise them. There are abt 3-4000 of them.
How can I access those lines which I want to isolate into a single file? I have all the usual linux stuff available and a bit of understanding of regexps.
i've got a select based application that wants to support a large number of mostly idle connections. the code is java and works on windows, suse enterprise linux, mac os x. it does not work on centos 5.5 (32-bit, 2.6.18 kernel, 1G of memory).
i've read and followed the directions in various articles about tuning linux for large numbers of connections (including the C10K problem), and gotten the number of sockets up to 3200.
these didn't make any apparent difference:
[URL]
on windows, i can get up to around 78,000.
on suse enterprise linux (a few years ago), i got up to 90,000. that's where i got bored and stopped.
on my mac laptop with os x (snow leopard), i got up to 10,500.
i have used ulimit -n 10240
my current goal is 10k sockets.
the test is that i'm opening one socket at a time until it fails. when it fails, many of the sockets which have already been opened also fail, in one giant cascade. sounds like a buffer / memory problem.
each group of 64 sockets gets a thread to manage select calls for them. thus i'm only using around 61 threads total when it fails.
I have the standard problem of trying to count a large number of files in a directory (>100k)
I have tried: ls ~/user/images/* -l | wc -l and find ~/user/images/* -maxdepth 1 -type f | wc -l
In both cases, I get the argument list too long error message.
I have tried using xargs but I can't seem to get it to work right.
The command
returns a valid answer but it includes all the subdirectories in the file count.
I'm trying to extract the sender id from a fairly large number of files and am having trouble assigning variables from a file. Here is what I have so far, (which is fairly kludgy I know, but it's been some years since I've done any scripting or programming, and I find that I have lost the knack to a large degree).
[Code]...
I am attempting to upgrade a system from 4.7 to 5.2 using a (now) DVD drive attached to the onboard IDE. Originally I had tried using a remote NFS image and a USB stick but I thought maybe there was a problem with the image. I can get up to the point of the installation of selecting the keyboard for the system and then it freezes and never goes any further. It doesn't appear to be a kernel panic since I can still switch between consoles.
I've got an MSI K9NGM2-FID with 14 drives in it. It serves as a file server for our backup server. It's got a secondary 4 port Silicon Image SII 3114 SATA card using the sata_sil module, and an old IDE Promise FastTrak TX2000. Technically I could have 16 drives but the 750W PS is walking the fine line on tripping it's self-breaker with the 14 drives and 7 fans. I would like to NOT have to disconnect all of this to do the upgrade.
I thought maybe that running the install using the "noprobe" option would help so it didn't detect and load the modules for the Silicon Image or the Promise cards and detect all of the drives but it still gets stuck on the step after selecting the keyboard. The installation info console and the dmesg console don't really provide any useful information. The installation console says:
INFO : moving (1) to step welcome
INFO : moving (1) to step language
INFO : moving (1) to step keyboard
INFO : moving (1) to step findrootparts
And the last lines of the dmesg console says:
<6>device-mapper: multipath: version 1.0.5 loaded
<6>device-mapper: multipath round-robin: version 1.0.0 loaded
<6>device-mapper: multipath emc: version 0.0.3 loaded
Is there a hidden "debug" option that will turn on a lot of extra logging?
I have on my windows machine several hundred files that are a format of .nc .ncs for a CNC machine. I need to convert them to txt which is something as easy as opening in notepad and then saving as .txt but there are so many that this kind of action would take way too long.
The reason I am writing the linuxquestions is because I would feel more comfortable in loading a live CD and using some sort of terminal command to do this than I would to download one of the many "freeware" type programs I have found for windows (even more so since I have had a root kit before and had to start all the way over to get rid of it).
I need to know:
1. Is this possible to do with the terminal without super advanced knowledge.
2. Can one please point me in the right direction; something to read or an example
I want to move files from a $SOURCEDIR to a $DESTBASE/$DESTDIR. Under $DESTBASE there are many directories, and I need to test beforehand if a file from $SOURCEDIR already exists in any of them.
This is obviously extremely slow, and the real use case involves dozens of dirs and thousands of files. Creating a temporary "index" file for the find command (instead of running it every iteration) speeds it up a little, but it's still very clumsy.
Just wondering now I see computers everywhere with 6G of ram or more if the new 32b kernels are going to be setup for large amounts of ram or will they still need to be recompiled? Also will there be better ssd support for things like "trim"? I know you edit the fstab to get the Linux version of trim but I am just wondering if stuff like that will just be automatic or if I will continue to need to tweak. I like to tweak but sometimes its the lack of need for tweaking that makes me like slack.
View 14 Replies View RelatedI want to transfer an arbitrarily large file (say >20GB) between 2 servers. I have several considerations:
Must use port 22 (ssh) because of firewall restrictions
Cannot tax the CPU (production server)
Memory efficiency
Would prefer a checksum check but that could be done manually
Time is not of the essence
Server A and Server B are on the same private network (sharing a switch) and data security is not a concern, Server A and Server B are not on the same network and transfer will be via the public internet so data security is a concern, My first thought was using nice on an scp command with a non-CPU-intensive cypher (blowfish?). But I thought I'll refer to the SU community for recommendations.
I am trying to understand a large amount of allocated memory that seems not to be accounted for on my system.I'll say up front that I am discussing memory usage without cache and buffers, 'cause I know that misunderstanding comes up a lot.I am in a KDE 4.3 desktop (Kubuntu 9.10), using a number of java apps like Eclipse that tend to eat up a lot of memory.after a few days, even if I quit most apps, 1 gb of ram remains allocated (out of 2 gb).this appeared excessive, and I took the time to add up all values of the RES column in htop (for all users).the result was about 1/2 gb.am I trying to match the wrong values?or could some memory be allocated and not show up in the process list?this is the output of free
Code:
total used free shared buffers cached
Mem: 2055456 1940264 115192 0 123864 702900
[code]...
I have been having a lot of trouble lately with installing from CD/DVD. The DVD reader/writer on this laptop is new. Nevertheless, trying to install Ubuntu onto an exernal HD, I get 'input output error on sr0 logical block (a large number) After a long time the booting proceeds to a point, but I never get the actual installation started, and have to shut down manually.
The CD is fine, says the Ubuntu-checker. I just installed using my sons laptop, and there was no trouble. Question: does this indicate a motherboard failure? A memory block damaged? Do you know of a diagnostic tool I can use to check the reading of a CD/DVD?
How do you find the parent process of zombie processes?
When the child process is something where the parent is not entirely obvious...
Is there some way to list processes in tree format or something?
I am using the diff command with the -r option, to compare a large number of files and files in subdirectories. My main interest is to find out which files have been changed, and not what the actual changes are, and since a lot of files has been changed, it would be a lot easier to view the file names only. Is there and option for diff that might do this, or does there exist a similar tool/command that could do the job?
View 1 Replies View RelatedI know of /etc/security/limits.conf and that can be used to limit all sorts of good things, but I haven't found anything that talks about using this when the users come from LDAP. Would I be able to do something like
@"Domain Users" soft nproc 25
@"Domain Users" hard nproc 40
where Domain Users is the group all users belong to in our system.