I have several servers running Ubuntu Desktop. These servers are remote access only and do not have a monitor or keyboard attached normally. I'm running into problems with them occasionally getting hung up, after crashing, on the grub recovery mode screen. The only way for me to make them boot up is to hook up a keyboard and hit enter.
My /etc/default/grub file is default:
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
What do I need to change to disable the grub loader screen from coming up automatically ever, or at least to make the timeout work when it does happen?
I've just tried to upgrade my Fedora 9 (x86_64) installation to Fedora 10 using the installation DVD. The upgrade seemed to proceed very smoothly, no errors ,nor warnings, it just seemed that it is upgrading grub (yes, I chose to upgrade grub as well) and all the packages (it took about 20 minutes). However, after the upgrade was over, it asked me to reboot my computer, so that's what I did, I took out the DVD and waited for GRUB to load.
It loaded just fine, but I was quite surprised when there was no option to boot Fedora 10 in the list. Ok, so I booted into Fedora 9 which went fine, the layout changed to the new one and some programs don't run. When I looked into /lib/modules I couldn't see any fc10 kernel installed. So the question is what happened and what should I do, so that it upgrades to fc10?
2 weeks ago, my power supply blew, during close-down. My system is a SUSE Linux 10.1 and openSUSE 11.1 dual boot with WInXP (for those family things). After replacing the power supply my system had no root partition, or loader. It said something like "Invalid Partition table". Grub had gone! So following swerdna's "How to Boot into openSUSE" tutorial I used the openSuse 11.1 install CD rescue option to get to the command prompt, su'd, went to grub and followed the stated commands. So far so good.
However the new grub entry openSUSE (Failsafe) has a problem. It starts to boot in the usual way, but I note fatal Module errors in the boot log relating to sata_nv not found, ide_pci_generic not found etc, and Fatal error inserting edd (/lib/modules/2.6.27.39-0.2-default/kernel/driver/firmware/edd.ko): no such device but uses udev as boot source until Waiting for device /dev/disk/by-id/ataST3120827AS-4M60PX7V-part6...... and then it exits to /bin/sh.
My fdisk looks Dev Boot Start End Blocks Id Syst /dev/sda1 1 1306 10490413 c w95 fat32 /dev/sda2 1307 2612 10690445 c w95 fat32 /dev/sda3 * 2613 14593 96237382 f w95 ext'd /dev/sda5 5486 8096 20972862 83 linux /dev/sda6 8097 10695 20987643 83 linux /dev/sda7 10699 14593 31310653+ 83 linux
just installed ubuntu 10.10 on my external usb hdd from my 8gb flash drive doing this on a laptop, my primary hdd (internal) is running windows (230gb of 250gb used) so i got an external hdd (2tb) and I decided to install ubuntu on it
I upgraded to Ubuntu 10.04 from 9.10 and when I try to boot into ubuntu now it goes to a screen where it says "waiting for /windows" and even after the loading bar is fully loaded it stuck on that screen. BTW I don't know if this will help but when I restarted it wouldn't work because grub was broken and I booted it 9.10 live CD and reinstalled it.
I recently installed Ubuntu 10.04. I'm trying to become familiar with the file system. I noticed my MP3 player (USB) is not mounted automatically when I plug it into the USB cable. I searched Google to find out how to auto mount this device and it worked. However, I didn't give this enough thought to what I was doing I guess. Now if the MP3 player is not connected to the USB cable the boot process stops at the splash screen waiting for the device. The window on the screen states the following:
The disk drive for /media/sdc1/ is not ready or not present. Continue to wait or press S to skip mounting or M to manual recovery.
I don't remember what I did to start this whole mess so I don't know how to undo it? Could someone please help me undo this? I would like the device to auto mount ONLY if it's plugged in if this is possible.
i am using Ubuntu 10.04.1 LTS. i only ever contact my ubuntu machine through SSH. everytime i login, i do:
~/downloads/.dropbox-dist/dropboxd &
this launches the dropbox process and all is great. except when i log back into the ubuntu machine via ssh after a few hours, the process no longer exists. how can i get the process to run indefinitely?
This is a standard install, just like I've done dozens of times before.
Plain vanilla, just installed.
When I boot, I get to the splash screen and it doesn't go into the default selection.
Could this be a Hardware thingy? The reason I ask is because I've had this issue happening with 5.2 on the same machine. I just formatted it completely and installed a fresh 5.3 i386 on it and I get the same behavior.
[root@server ~]# cat /boot/grub/grub.conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that
nm-applet timeout. I connect to the internet via wifi access. I have this problem that whenever there is a powercut, my wifi router switches off and then nm-applet tries to connect and then after sometime times out i.e. nm-applet gives up on trying to restore the connection.
I want nm-applet to keep trying to restore the connection indefinitely because if the electricity is back lets say after an hour then it should immediately connect without manual intervention.
I did google around trying to search for the configuration parameters but was not able to do so.
Anyone know the reason why a sleep( ) on a Redhat Linux OS would cause the system to indefinitely hang? It's doing this every 10 or so calls in my program and I have to press the reboot button on my computer. My program is reading from a UDP port that has messages sent to it 20 times per second. When I sleep I assume the internal UDP buffer is getting more and more filled.
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit: I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
The day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
I try to install openSUSE 11.4 KDE RC 2, unfortunately I show black screen after GRUB screen. I must press Power button to turn off my computer. I hope it won't on openSUSE 11.4 stable. I'm waiting for downloading openSUSE 11.4.
I just started and very green, I got a old unit that has Linux instaled. I get home start it and I get a purple screen after gnu grub screen, I'm using a diferent mouse and monitor is all that changed from when I picked it up. I don't know were to start.
I installed Ubuntu 9.10 recently using the installer (which was awesome, I've wanted to install Ubuntu again for awhile now but I didn't have any usable CDs and that wasn't available before or I was blind). I'm dual-booting with Vista 32 bit and it was working fine as far as I could tell for a week or two... but I noticed a few days ago, when I would try to boot into Ubuntu, once I selected 'Ubuntu' and then got to the screen where I'd normally ENTER on the 'linux-blahblahblah' thing, it's a command line. I can't get much out of it because half of the first word or so is too far to the left of the screen, I'm unable to read it.
I don't have the time to figure out what I'd search for for a fix for this. I'm only just now getting around to seeing if it would do it again today.
Anyway one day I start my computer and instead of starting normally it comes up with a screen which says GNU GRUB version 1.97~beta at the top. I selected the option Ubuntu, Linux 2.6.31-19-generic as I figured this is what normally loads without being prompted in the grub menu, but after this I got the ubuntu logo for a few seconds then my screen goes blank. My laptop is a hp510.
today I used team viewer to access his computer to modify grub, the only modification I made was to change the timeout to "-1" so that the grub screen would show, ( he was having kernel issues )Anyway he rebooted after a few updates and now after choosing the kernel, (theres only one to choose from plus its recovery mode) he gets a green screen and then his monitor goes into power saving mode cause it doesn't detect an output. I've tried the whole, press 'e' and edit the quiet splash to say i.915mode=1/0 the xforcevesa and the nom one nothing changes He's running an old Time machine which we dont have the right specs for, all I know is that he has 512 Ram.
I have been learning about Ubuntu since 8.10. I have my two computers running dual boot (W7 + 8.04 & Vista + 9.10).
Sorry if this is a noob question, but I have noticed that each time there's a new kernel (now I have 2.6.31.16-generic), the grub OS selection screen adds 2 lines: - One for the new kernel - One for the new kernel - recovery mode
So, since I installed Karmic (2.6.31.14) Ubuntu Update has added 4 rows and shows code... What is the rationale behinf this? Why would I want to boot using the previous kernel versions?
In my laptop, it's GRUB 2. How can I eliminate the unused options?
i moved a computer from a house into another which has a printer, i hooked it all including the printer(through USB) it seems whenever i turn on the computer, just getting to the grub menu, the printer prints 3 pages with garbled messages things in | are me explaining the sysmbol
I was playing with my netbook and trying to hackintosh it only to realise mic, webcam and network don't work. So I restored the entire disk ubuntu 9.10 from a Ghost image I had made prior. But it doesn't boot, it only shows the word GRUB on top left corner.
I've been using Ubuntu on and off ever since about 8.04. This newest release (10.04)... wow it's amazing. That's all I can say. The only gripe I have right now is that right after I select Ubuntu from GRUB, the screen goes black for about 10 seconds, then goes to the bootscreen. By the time it gets to the bootscreen, the bootscreen is shown for about 3 seconds, and then I get the lockscreen. I have a nVidia card with proprietary graphics drivers installed.
