I am using Ubuntu 10.10 Maverick Meerkat. I want to install Ubuntu tweak on my system. I don't have a dedicated graphics card in my laptop but a shared one with a total RAM of 3 GB. Whether Ubuntu tweak will work on my laptop with shared graphic card or not?
View 2 RepliesIn Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies View RelatedI had an old thinkpad x61s laptop running ubuntu 10.10 with an intel gm965 graphics card. When i checked the monitor today it says the refreshing rate is 50hz and there is no other option available. I vaguely remember it used to be working at 60hz when I was running xp, so I googled and searched the forum for answers but came with no luck. Some people reported a similar problem with their nvidia graphic card and they seems to be able to modify a xorg.conf file to manually solve the issue (sadly I don't know how).
View 4 Replies View RelatedMy notebook can't install Fedora15 because of the graphic card, it said the card's problem or the driver's, i can't tell.
View 5 Replies View RelatedWell, i guess it is the graphic card:
I tried to watch a flash video on full screen; then the screen went black with some glitches and then my laptop suddenly shut down. I couldn't start opensuse back again, the screen goes black and freezes. I tried restarting in windows, and it freezes too. However, opensuse in failsafe mode works.
After that, i tried reinstalling opensuse. This time, i can start normally, but after a while, the screen shows some glitch (the updater applet looked wrong) and freezes. Windows isn't loading either, but opensuse failsafe mode is still working ok.
I guess it is a hardware problem (since windows also crashes). However, i would like some help to run "diagnostics" to my system.
My graphic card is a nvidia 8400 gs, and i am running opensuse 11.3
I was using the nvidia driver i found in opensuse-community (installed quite a long time ago); however, after i reinstalled, i was using the default driver. It is possible that my kernel was updated a couple of days ago (but i am not really sure of that)
I'm having problems with trying to play 3d games or xbmc on a Compaq Evo N1020v laptop with Ati Radeon IGP 330M/340M/350M graphic card. Compiz works, glxgears works but any attempt to play 3d games results in failure.
[Code]...
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies View Relatedi justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
I have now a Nvidia card but how to make 3d work in Factory. Now I wonder if the Intel or Ati cards can do a better job and are easily to configure.
View 4 Replies View RelatedI have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Here is the output from the alsa-info.sh script.
Will Ubuntu Tweak work with 10.10?
View 1 Replies View RelatedI recently bought a HP g62x laptop for myself. It sports a decent Core i3 processor, 4 gigs of RAM and a 500GB HDD. It also came with Wireless-N, a real bonus because I am using a Wireless-N router. The chipset is a Ralink 5390. It came preinstalled with Windows 7, and everything works fine in there (obviously).
I then proceeded to install Ubuntu 10.10 x64 a few days ago (this is before Natty came out) and everything worked . . . except WLAN. So I plugged in via Ethernet and went looking and found that I clearly wasn't the first to discover this issue. I found a guide here that I followed to download the Ralink Linux driver (which is stated to support my chipset), configure, compile, and install. Everything went perfectly, I restarted; lo and behold, I have a list of access points. I went to connect to mine, entered the password, and now the animated "WiFi wave" logo keeps going indefinitely until you click it, and it freezes for a few minutes. It will unfreeze if you let it sit but clicking it causes the same freeze again.
I couldn't really care less about a WiFi icon freezing, but a.) it freezes everything else in the system up, not just the icon, and b.) it never actually completes the WiFi connection. I really, really don't want to be forced to use Windows because of a crappy WiFi driver!
Since Natty came out I installed that and I can't even compile the driver without fatal errors, so I reverted to 10.10 and everything is the same as it was before. Note that this is a clean Ubuntu 10.10 Desktop Edition 64-bit install, nothing updated/modified/changed besides (attempting) to install this driver.
I have a problem with my sound card Microphone is working, headphones work but with kind of a low audio output, laptop speakers do not work at all. I have checked alsamixer and pulseaudio nothing is muted, tried all sort of different combinations and pulseaudio actually sees that mplayer for example is playing music, or skype is in videocall and using the sound device, but nothing is coming out of the speakers.
Laptop is Sony Yseries VPCYB15AG Alsa-info is [URL] Audio Device is 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) Drivers Loaded are :
[Code]....
I installed ubuntu but when I first tried to login with my correct passwords it goes in a loop and prompt me to log in again. I went to recovery mode and selected safe mode then I was able to log in without any further prompts. As a result of what happened, I unlocked the login screen and changed the setup to allow me to log in automatically and in safe mode only. I am now stuck to login in safe mode only. I tried to unlock the login screen to change to default but no chance. If there is no graphic card in the PC would that have an effect on memory or login?
View 4 Replies View RelatedI try to boot up Ubuntu.It seems like everything goes on as normal (I can tell from sounds), but the screen becomes just a jumble of randomly colored lines (see photos; I couldn't get screenshots for obvious reasons).I also included some info about my computer (see pic), but I don't know anything about my graphics card, how do I find that?
P.S. I just installed a fresh version of 10.04 Lucid (dual-boot with WinXP), and as far as I remember, I haven't changed any settings or even installed any software yet!
I am trying to install lucid lynx on this laptop [URL] and I am getting the blank screen problem at installation. I tried nomodeset, vga=771, xforcevesa and a couple more and nothing seems to work. I have a livecd I burned a couple months ago. If I delete the quiet splash line at the livecd I get some repeating text too fast to see and after a couple of mins the laptop shuts off by itself. what can I do to get lucid lynx working on this pc?
View 2 Replies View Relatedim running ubuntu 11.4 im trying to install amd catalyst 11.4 for my x1300 ati graphic card but when i installed it my system couldn't start and i had to start in recovery mode for removing tha package. i think i have done something wrong with the packages how to install ati catalyst 11.4 on my x1300 graphic card
View 1 Replies View RelatedI belive there is a problem with my graphics card, because when I start a VMware vm with accellerated graphics, i get this message: Code: Cannot open file "/home/joe/.vmware/dndlogs/ * dndlog.conf": No such file or directory. 3D graphics acceleration will be disabled. This computer does not have a 3D graphics system supported by VMware Workstation. My laptop model is the ASUS U52F-BBL9 btw.
View 1 Replies View RelatedHowever I have problem to install my graphics card Asus ATI Radeon HD 6750 Formula....
View 4 Replies View Relatedhow is the support for multiple, two or more, monitors in ubuntu (10.04) when using a graphic cards from AMD(/ATI), for example the HD 5770. (Which I'm currently using). I know that DP is required to use three monitors on a regular card. But other than that, will it work? Am I to expect a lot of work to be able to get it working? Or will it simply be impossible? (And yes, I know that AMDs(/ATI) drivers aren't always the best... Although changing to a card from nvidia at this moment isn't possible)
The background to my question is that I'm thinking about buying another monitor, same model as the current one I'm using, and later on perhaps expand to buy another one.Tried to search for it but wasn't able to find how the support would be in linux, and ubuntu in particular, since most I found is about the windows support, which should work quite easy and therefore isn't relevant.
Just bought one of these - [URL]. Installed 9.10 64bit, install went smoothly, but now having a few problems with graphics card drivers and sound. The system has a ATI Mobility Radeon HD 5470 Graphics so I guess it's too new for a driver?
View 9 Replies View Relatedubuntu 10.10 64 bit i try to change graphic card it have some problem bit about colour an old i use ship of nvidia gforce 200 series but when i change to nvidia gforce 7900 i login it's show in black screen mode . ubuntu 10.10 name-desktop tty1 name-desktop login: _
View 1 Replies View RelatedThe display settings of my Netbook runs fine but i am not able to change them for bigger screen which works perfectly for Windows 7. Where can i download Linux driver for my graphic card something like Nvidia-setting? I think my Lenovo Ideapad s10e has Intel Corporation Mobile 945GME Express Integrated Graphics Controller.
View 7 Replies View RelatedI have a problem with installing ubuntu 10.10 in my vaio cw. when I boot it , it doesn't show anything on my LCD but when I plug a monitor in , there would be an output. Also I have the same problem with 10.04 version.
View 7 Replies View RelatedI don't understand how i should install the driver for my code...
View 2 Replies View RelatedI bought ASUS K50c with SIS graphic card and have win7 on it (i install it alone).I want to install ubuntu!I found installation of ubuntu 10.10 and tried to install it. There is a huge problem with my graphic card because resolution is 800*600! I found installation of ubuntu 10.04 LTS and tried to install it. Again problem. I tried to download drivers from www.sis.com but there are tar.file and i don't now what is that or how to install it.In windows I now how to install anything, but there is a problem.I am ready to install any version of ubuntu just to solve this problem.
View 2 Replies View RelatedHow do you enable the graphic card? i have an ATI one and using fedora
View 2 Replies View RelatedI've already got two installs without much problems.. one on my laptop and another fedora13 install on an older comp just to test it a bit before installing it on my main comp. But now I've got a problem. Both those install went without problems but when I started installation on my main comp first I've noticed some graphic problems when there is installation started and there is mouse and fedora 13 welcome installation screen. there are some like glitches or something no idea how to describe them.. like bad pixels in small upper part of the screen. But ignoring that everything went OK up to the part where I can choose a standard discs or non starts like sans and stuff..
When I choose standard disc installation just freeze there. No idea what is happening. Only this that came across my mind is that there is a problem with raid maybe? There are 2x640Gb HDD in raid0, there is win7 installed, and another 1Tb HDD, non-raid member disk, where I would like to install Fedora and have a dual boot. Still got programs that I need win for I'm afraid. Installation went smooth on laptop and another comp but there is no raid so I'm guessing that could be a problem. This comp where installation froze is in short:
[Code]....
I've tried for months, to install a version Fedora where there could not exist any glitch with the graphic card, but without a solution. I recently have taken the path of linux systems, so I'm kinda new with this problem and don't know what to do ! The glitch make some horizontal lines dancing in screen, or can't even read anything. Here you have the spec : [URL]
View 1 Replies View RelatedI've got a problem to use intel graphic card and kde. When I enable opengl support it seems threa re refresh problems, botton now are visible, now not, it seems a blinking effect and when I move the pointer it seems kde try to re-draw the object but the object get invisible, so a relay mess. Xrender instead work but it's slow. Whit opensuse 11.2 all was ok. glxgears however shows me pretty good performance so I don't understand where is the problem.
View 7 Replies View Related