Ubuntu :: Super Slow Browsing 10.04 ?
Jul 23, 2010
web browsing is going SUPER slow in my samsung N150 netbook with dual boot(win7/ubuntu10.04). Windows counterpart working flawlessly.
Into the details:
The problem is, i go into a website and it seems to renderize by chunks, ie i enter my favorite PC hardware forum and it is like this when loading: Processors...1sec....Vid cards....1sec...Memory...and on and on until the bottom of the page is reached. The normal behavior is: Click...forum loaded ,as on windows.
By default i use my wireless conection, but also tried wired one to no avail. Also tried it from the live cd and i have the same problem. Some sitess like google, gmail and ..... load normally(instantly). I've tried disabling ipv6 as adviced in several parts and had no results. I used the default firefox 3.6.6, firefox 3.6.7 and chrome with the same results.
This is the info for my wireless adapter just in case:
description:
View 9 Replies
ADVERTISEMENT
May 4, 2010
This something I have only experienced since the final install.I'm using a fresh firefox profile with NO extensions currently. The only change I have made is to disable ipv6 to see if it helped with the following problem. Browsing web pages is stupidly slow and much slower than I am used to.Downloading in firefox is normal and running at speeds I would expect.For example, I have downloaded several distro .iso's over the past two days and they have been consistently downloading at 1MB/s +This is only affecting browsing web pages and it's affecting all of them, even the basic google search page takes at least twice as long as normal.
View 6 Replies
View Related
Apr 22, 2011
I'm not a Linux noob, by any stretch, but this is driving me INSANE. I have an Acer Aspire 4320 laptop, and I'm trying to install 10.10 on it. The LiveCD, and the LiveUSB, take over 3+ HOURS to boot to a desktop. Then, it can't format the drive. Am I missing boot options (i.e. 'noapic') or something?
Do I set the drive in bios to ide or AHCI? (If set to ide, it takes ALOT longer..approx 45 min to get to the "run" or "install" screen) EDIT: I did manage ONCE to get to 'check this drive for errors', no killers found. (At the 'keyboard screen, I pressed 'space'). Do I need to add any other options here?
View 6 Replies
View Related
Nov 26, 2010
I have looked at other threads on this subject and am still confused. Several weeks ago I had issues with browsing taking forever to resolve a page. When I changed my router to Open DNS settings that seemed to fix the slows and when I replaced the Open DNS IP's with the Google IP's, things were even quicker. Now I am back to the slows but there is no resolution latency it's just a delay when clicking a link, nothing happens and then the page eventually loads but you see the ads write on the page after the text loads. It's just not snappy. My nsswitch.config looks like this:
# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.
[code]....
View 3 Replies
View Related
Dec 3, 2009
I am have setup a temporary ssh server to reverse ssh to remote clients. When a client has an issue I have them reverse ssh to my server and then from my laptop or workststation connect to there workstation. The problem that I am having is when I connect to them from behind my firewall from my laptop the connection is really slow but when I connect to them from the firewall it is fast. I am using Firestarter which is simply a GUI for iptables. I am trying to figure out what iptables rule is causing the connection to slow down behind the firewall.
View 7 Replies
View Related
Oct 30, 2010
Wireless connection is very very slow.
Mostly have tried firefox and chrome.
IPV6 fix in firefox had no better results.
Code:
View 1 Replies
View Related
Jan 31, 2010
Browsing via SSH Tunnel very slow When browsing in firefox at work via proxy through ssh on my 8.04 server the speed is near dial up. I have compression enabled, tried restarting ssh, and rebooting the server but it remains so sluggish. At home the connection is quick but the speed is lost in translation once I ssh in. I also tried adding "UseDNS no" to the ssh config but that did not help with the slow login or any other speed issues.
View 5 Replies
View Related
Jul 6, 2010
my computer is very slow to view regular web pages, and generally fails to load them. It seems to be a problem specifically with webpages - I can work over SSH, use email, transfer files over FTP connections, with no noticeable problems, but any regular website (including this one) can take an age to load. This happens regardless of the browser I use (at least, it happens on Firefox, Opera, and Chromium), and regardless of wired or wireless connection (though admittedly I've not tried using a wired connection very much). As far as I can tell, it can also happen on any website. It is specific to linux - my computer is dual-boot ubuntu 10.04/Windows XP, and there is no networking problem when I use Windows.
View 3 Replies
View Related
Feb 12, 2010
I'm using wlan and I'm behind a NAT firewall. Downloading with BitTorrent can reach speeds of 1,5MB/s, but browsing is incredibly slow. Chromium/Firefox seems to hang forever on "connecting.." or "waiting for". Sometimes pressing the reload button will speed it up. I have two Ubuntu boxes and they are the same way.
I don't get it, if downloading is so fast, how can browsing be so slow. Yes I have disabled ipv6 in grub and in Firefox, don't know how to do it in Chromium. Have 64-bit Ubuntu. Cnet wlan card using rt61pci module.
View 9 Replies
View Related
May 29, 2011
I don't know if others are experiencing this but browsing is extremely slow in firefox after "upgrading" to ubuntu 11.04. I have not tried other browsers. Even checking for updates fails several times.
I had to re-boot to windows to post this thread and now it's working fine. It's been 3 days since upgrading and I've observed many times that there's no such problem in windows while I have to wait like 4-5 minutes and refresh many times to open a single page. Some sites like google are quicker though. I use firefox 4.0 both in ubuntu and windows. I didn't have this problem in 10.10 and it took me about 5 hrs. to download 1 GB upgrade packages.
View 2 Replies
View Related
Jun 27, 2011
I'm running Mac OS on a home network that includes a Win 7 machine and a Ubuntu box (Ubuntu 11.04 (GNU/Linux 2.6.38-8-generic i686)). Connecting to, and browsing the shared drives I have on the Ubuntu box (which acts as my server) is extremely slow from the Mac, it seems that the icons especially take ages to load. I've found a few suggestions on the net that I've implemented to no avail i.e.
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=65536 SO_SNDBUF=65536
Are there any other settings I should play with, or is there an alternative to samba that will work faster on a mixed network and be compatible with everything?
View 2 Replies
View Related
Aug 27, 2010
On my computer, I'm using 11.3, KDE 4.4.4 and Firefox 3.6.8. Firefox is so s...l...o...w..... It's slow loading and it's slow browsing. Konqueror takes 1, maybe 2 seconds to load, and another second to load the home page. Firefox takes a good 30 seconds to load. The only message I get when loading from a terminal is about not using a shared database. I don't hear the disk churning like it would with a fragmented disk.
I can't believe everyone is having this response, the hue and cry would be enormous! Anything to try? Should I try loading another browser? I tried Opera on 11.2 and didn't really like it, had problems with a lot of content. What about Sea Monkey (Gad, I HATE words with monkey in them!) Konqueror won't show a lot of videos and I have problems using the back and forward buttons. I'll wait for fixes but in the meantime.
View 9 Replies
View Related
Jul 19, 2009
I'm not sure why, but over the last couple of days when I browse the web with my Centos 5.3 machine running firefox 3.0.5, it takes a very long time to load web pages. Loading the app itself is pretty quick, and I have not issues with system resources (it's an HP Proliant ML115 server, with dual opteron processors & 3Gb RAM). Looking at CPU & disk useage there's nothing out of the ordinary:
top - 18:59:19 up 1 day, 22:54, 2 users, load average: 0.28, 0.90, 1.20
Tasks: 162 total, 1 running, 161 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.2%us, 0.3%sy, 0.0%ni, 96.0%id, 1.5%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3090912k total, 2278624k used, 812288k free, 194520k buffers
Swap: 2031608k total, 0k used, 2031608k free, 1241912k cached
[Code]...
View 6 Replies
View Related
Dec 4, 2010
I have in my pc (ubuntu 10.10 32 bit) a folder with about 10.000 files. It is a samba shared folder and so far I could browse fast and easily those files in another old ( Pentium4 1,5Ghz) PC with WinXP. I installed ubuntu 10.10 but the browsing now is toooooooo slow , although the old Pc's performance is considerably faster than before (when I had WinXP). Also, although the old PC's speed is satisfatory now, would it become even faster if I installed an older ubuntu distro?
View 4 Replies
View Related
Jun 15, 2010
I have a 2.6 P4 with HT and 1GB of PC3200. i'm using an RaLink 2760 based wifi card. i compiled the driver from source, don't think it matters because i get this problem on ethernet as well. video is RV280 (radeon 9200). i have 3D accelleration supposively and get 570fps steady with glxgears. i'm in F11 updated as far as yum will take me.
When browsing websites, usually forums but even things like ....., the computer acts like it's being bogged down by something. i scroll down a page and it takes a few seconds for the screen to catch up. i understand i'm not running the most up to date hardware but i don't think this machine should have any problems with web browsing.
Here's an lsmod
Code:
View 5 Replies
View Related
Aug 7, 2010
I have a connection an its slow in both ff and chrome...however i can ping sites and get the same response time as my xp machine which runs fast. usually around the 40ms mark with no lost packets.
Also when i do installs eg. of chrome etc, i was getting up to 500kB/s download. I just cant seem to replicate this browsing, its loading up at a dial up pace. The last time I had an issue like this was setting up my mums work laptop on our home network where the work had specific proxy settings, so we turn the off and it works fine.
I do not know how to tinker this
INFO::::
broadcom 4306 chip
have tried ndiswrapper
and
bcmxx fwcutter
View 1 Replies
View Related
May 21, 2011
I've recently installed openSUSE 11.4 (64 bit) on my system and am experiencing severe performance issues with websites using https (any site using https). Page loads over https take anywhere between 30 seconds to 2 minutes. It's the same issue posted here Secure sites load slow or not at all -- there was no confirmed solution.
- My router/hardware configuration has not changed in a long time and I've run Ubuntu, Arch Linux, and Windows XP on the same machine within the last year and have not had any issues.
- I also have a laptop running Arch Linux (kernel 2.6.38) and this problem does not occur using Firefox 4 or Chrome. To add to the madness this problem occurs while running Firefox 4 inside a Windows 7 guest via virtual box, but NOT while running IE 8 inside the same guest.
- This issue occurs using Firefox 4, Chromium, Opera, Konqueror, and Arora.
- I've disabled ipv6 in Firefox via about:config.
- I've disabled ipv6 in yast and have attempted to use both the "ifup" and "networkmanager" options.
- I am not using a proxy server.
- I've attempted the fix posted in the Ubuntu forums for a similar problem [ubuntu] [SOLVED] Banking Site is very slow.
View 7 Replies
View Related
Dec 13, 2010
I'm running Ubuntu 10.10 on my Precario Laptop I'm connected via WiFi to an Edimax BR6424-N and i cannot login to Msn and browsing is extremly slow as soon as i connect to any other network but myin everythings fine, Ive searched the web alot and found that i should down the mtu in linux so i did, from auto to 1350 and still i keep getting disconencted from msn and briwsing is just extremly slow, Im In the same room as the router so distance is not the issue...
View 1 Replies
View Related
Feb 18, 2011
I have installed Wubi (Ubuntu 10.10) recently. It takes more time to boot than Windows. But my main concern is that my browsing speed is much slower compared to that on Windows 7. How can this be resolved?
View 1 Replies
View Related
Oct 6, 2010
I'm running 11.2 on a Dell Latitude D630. Everything has been great other than issues with Suspend and hibernate not working correctly. However after about a month of use browsing the web has really slowed down bad. It doesn't seem to matter if it's in Firefox or Chrome either. I am using a wireless connection that is getting the signal at 85-95%. Even though I still tried using a direct cat-5 connection to the router and it was still slow as well. I have the fastest broadband connection my cable offers and my windows boxes on the same network are still flying.
View 2 Replies
View Related
Jun 5, 2011
how to use the <Super>ButtonX (<Super>Button1 for example for the enabled Compiz Screenshot plugin)? I also notice there is configurable buttons 1 throught 20 under the various options. At first I thought the ButtonX was a mouse button. Maybe it is with some anticipation of there being eventually being a possible 20 buttons on the mouse. I know the Super key is the Key with the Windows logo on it. But I don't know what to do to get the needed Super Key / Button combination. After having enabled Compiz's Screenshot plugin by its default, I don't get an image after hitting any of the Super key and mouse button combinations. I'm running Ubuntu 11.04.
View 2 Replies
View Related
Feb 9, 2011
I installed Ubuntu 8.04 in a dual boot with Win 2000. After the install I immediately installed all updates. Then I upgraded it to 9.04. Afterwards, Ubuntu was extremely slow! For example, mouse lag of at least 5 seconds. Click to open a folder, 45 second delay. No matter what I click on it's extremely slow. Also on the pull down menus several programs are missing. I believe my only option is to uninstall Ubuntu and start over again. My question is How do I uninstall Ubuntu??
View 1 Replies
View Related
Sep 18, 2009
I have a Centos 5.3 server with Samba file shares and a shared Samba printer. I am not running a domain.
I recently changed my windows desktop pc from an XP machine to a vista 64 machine... It has a different user name. Everything went pretty smoothly - and the and the vista machine found the smba printer - and even downloaded the driver from the samba server. he printer works OK - and the file shares are fine.
The only thing which is quite odd - is that the Printer Properties dialogue takes more than 30 seconds to come up - and every action you attempt with the dialogue takes a similar amount of time.
I will include below the essence of my smb.conf:
View 3 Replies
View Related
Oct 17, 2010
I've just installed Slackware 13.1 in two different laptops for first time. I have some strange internet browsing behaviour in one of the laptops. I've installed 2 internet browsers(firefox,opera) using the directions from Slackbuilds.org and there is also konqueror pre-installed. Moreover I installed Wicd network manager.
I can browse some pages e.g. ..... with firefox very slowly but NEVER facebook. I can browse almost any page, even facebook, with OPERA but very very slowly. The same goes with konqueror... Wicd shows that i am always connected with my WPA wireless network
Laptop details:
Quote:
Toshiba sattellite a100-209
//-----------------------------------------------
Processor Intel Celeron M 370 / 1.5 GHz
Databus-Speed 400 MHz
//-----------------------------------------------
Installed RAM 512 MB
Technology DDR2 SDRAM - 533 MHz
[code]....
View 7 Replies
View Related
Jul 16, 2010
Add some pictures inside your Pictures home folder (~/Pictures). Summon Gnome-DO by hitting [Super]and[Space] Type "slideshow", hit [TAB] and select the 'Pictures' folder or another user-defined folder where pictures are stored and finally hit [ENTER] I've Googled the topic (super key) but all I've found is "what," not "where."
View 2 Replies
View Related
May 2, 2011
I would like that the shortcut <super>+<space> open gnome-do. I set all this in gnome-do already, but everytime I hit the <super> key, the unity menu shows up. I'm using 11.04, 32bit on a lenovo 3000 V200.
View 2 Replies
View Related
Apr 22, 2010
Recently I installed Ubuntu using WUBI. During installation it asked for a user name and password which I filled in. That user name and password are the same that I now use to log into ubuntu. But now I am unable to log into super user using the terminal. When I try to log in to the super user account it says that the password is wrong. During the whole installation process only once did wubi ask me to enter password and I am using the same password. My windows user name and password are the same as what I entered during installation.
View 3 Replies
View Related
Apr 30, 2010
Can I upgrade Super OS to 10.4 or should I wait until there is a specific Super OS 10.4 made?
View 1 Replies
View Related
May 4, 2010
I've been working on this for a couple days, but I cannot seem to find a solution either on my own or through trusty Google. For whatever reason, I cannot get the Super key assigned to the Left Win as I have had it in the past. There does not seem to be an option to do that in the Keyboard layout thingy.
View 4 Replies
View Related
Apr 28, 2011
I've just upgraded to 11.04 and I can't get Super Key working in Compiz, which should be binded to Left Win. It shows up as Multi_key when I enter a key combination. However, if I bind Caps Lock to Super Key it works when entering a key combination. I'm also using a Logitech MK520 keyboard.
View 9 Replies
View Related