Ubuntu :: Software Raid On External Is It Movable?
Jan 1, 2011
I have an external icy doc with 4 750GB drives. There connected via external esata to an older machine and I just built a raid 5 on it, and it seems perfect, mounted as /dev/md0, note this is running the latest 10.10.version.
I've been around a while, but never using software raid, but I want to upgrade the hardware here in the next few months so if I take that drive, plug it into the new server, under disk management, will I be able to just mount it? I know there getting good, but I assume somewhere there has to be a config file or something that says 'hey use these 4 external drives' or something like that.
View 1 Replies
ADVERTISEMENT
May 12, 2010
I've done a fresh install of 10.04 (amd64) on a computer with two screens and twinview configured and I don't see how to move the Gnome panels to the second screen.Left-clicking and dragging them to the desired position (something that worked fine in 8.04) doesn't seem to work. Needless to say that the position picker in properties does not contain any "second screen" options.
View 5 Replies
View Related
Jan 25, 2011
I am looking for a web cam that I can move its base and zoom it's picture remotely via command line for linux.
View 1 Replies
View Related
Jan 25, 2011
I am looking for a web cam that I can move its base and zoom it's picture remotely via command line for linux does any body know any suggestion.
View 2 Replies
View Related
Dec 21, 2010
i want to setup an external raid array that i can manage with a netbook running 10.10 desktop such that i can use the raid at will similar to an external usb drive (or set of them).is this possible?
i am reading through this thread..[URL]... it looks very informative but because i am a complete noob with raids i am not sure that what i want to do is even possible.
View 1 Replies
View Related
Jul 5, 2011
Have Lian Li Ex 503 External Raid System, using 4x2TB, using Raidmode 10 for good performance [ Just for those who are interested: http://www.lian-li.com/v2/en/product/pr ... ex=115&g=f ]
[Code]...
But using e-sata my transfer rates are very low (from internal drive to external ex503), around 60-70mb/sec
But hdparm tells me:
[Code]...
View 3 Replies
View Related
Jul 31, 2011
Have 4xSamsung F4 HDDs in an Ex503, Raid 05 - don't know how to format them to get maximum speed out of them. I've read [URL] tor_issues and other things but guess i am too dumb. Some claim using GPT Partition table and gparted and i shouldn't have any problems because it's automatically doing what i want, but i am not sure about that.
View 3 Replies
View Related
Aug 15, 2010
I'm building a new desktop computer, on which I plan to install Debian Squeeze. I'll have a 1 TB SATA hard drive in the system. I'm also considering using two 500 GB external USB drives, but I'm debating about how I want to use them. Running them all separately for 2 TB of space could be a nightmare, with three potential points of failure, so I was thinking of using the two external drives as a backup system instead.
I'm considering linking the two external drives in a RAID 0 array, then linking that array and the internal drive in a RAID 1 array. I would use mdadm software RAID for all of this so I could use individual partitions in the arrays, avoid hardware dependency, and have greater software control. So now is this feasible to do (having a partial RAID 0+1 setup)? Moreover, what kind of performance could I expect from using potentially slow external drives (one of which I know has a very long spin-up time after idle periods) in a mirroring setup with the internal drive?Would I be far better off using a filesystem backup daemon instead?
EDIT:After some more research and brainstorming, I've decided I might just end up using rsync+cron, lsyncd, or DRBD (assuming it can easily make backups locally). I'd probably have to link up the external drives in RAID 0 (or use some filesystem link trickery). But I suppose such a setup would offer greater control, flexibility in disk capacities (the full system isn't so strictly limited to the capacity of the smallest member of the array), and granularity than RAID 0+1 would.I'm still open to thoughts on the mdadm RAID 0+1 solution, but does anyone have any advice on choosing backup software? For some background on my needs, I'll be using this computer as both an everyday desktop and a personal LAMP server (MySQL database files would be included in the backups).
View 6 Replies
View Related
Feb 1, 2011
Could any RAID gurus kindly assist me on the following RAID-5 issue?I have an mdadm-created RAID5 array consisting of 4 discs. One of the discs was dropping out, so I decided to replace it. Somehow, this went terribly wrong and I succeeded in marking two of the drives as faulty, and the re-adding them as spare.
Now the array is (logically) no longer able to start:
mdadm: Not enough devices to start the array.Degraded and can't create RAID ,auto stop RAID [md1]
I was able to examine the disks though:
Code:
root@127.0.0.1:/etc# mdadm --examine /dev/sdb2
/dev/sdb2:
Magic : a92b4efc
Version : 00.90.00
code....
Code:
mdadm --create --assume-clean --level=5 --raid-devices=4 /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2
As I don't want to ruin the maybe small chance I have left to rescue my data, I would like to hear the input of this wise community.
View 4 Replies
View Related
Mar 23, 2011
Ubuntu does not see any hardware RAIDs on this server - Intel confirms that they do not support Debian distros with this onboard SATA controller.
Tried going with CentOS and OpenSUSE ... CentOS would install, but wouldn't boot. OpenSUSE would work but after multiple installs, Samba wouldn't start.
That left us with Ubuntu Server.
While Ubuntu Server can't see a hardware raid, it can see each of the hard drives individually. From there, I created a software RAID during Ubuntu setup and was able to install.
Initially had some issues with mdadm "losing" the hot-spare ... was able to fix that by adding sd[abc][12] to /etc/mdadm/mdadm.conf ...
It worked fine until I plugged a WD MyBook usb hard drive into the machine.
I lose the hot spare (configured on /dev/sdc) because it mounts the USB hard drive there.
I need to be able to make it mount the USB hard drive AFTER mdadm configures /dev/sdc as the 3rd Hitachi hard drive
What needs to be done to make this work?
View 1 Replies
View Related
Jul 18, 2011
I have a raid5 on 10 disk, 750gb and it have worked fine with grub for a long time with ubuntu 10.04 lts. A couple of days ago I added a disk to the raid, growd it and then resized it.. BUT, I started the resize-process on a terminal on another computer, and after some time my girlfriend powered down that computer!
So the resize process cancelled in the middle and i couldn't acess any of the HDDs so I rebooted the server.
Now the problem, the system is not booting up, simple black with a blinking line. Used a rescue CD to boot it up, finised the resize-process and the raid seems to be working fine so I tried to boot normal again. Same problem. Rescue cd, updated grub, got several errors: error: unsupported RAID version: 0.91. I have tried to purge grub, grub-pc, grub commmon, removed /boot/grub and installed grub again. Same problem.
I have tried to erased mbr (# dd if=/dev/null of=/dev/sdX bs=446 count=1) on sda (ide disk, system), sdb (sata, new raid disk). Same problem. Removed and reinstalled ubuntu 11.04 and is now getting error: no such device: (hdd id). Again tried to reinstall grub on both sda and sdb, no luck. update-grub is still generating error about raid id 0.91 and is back on a blinking line on normal boot. When you'r resizeing a raid MDADM changed the ID from 0.90 to 0.91 to prevent something that happend happened. But since I have completed the resize-process MDADM have indeed changed the ID back to 0.90 on all disks.
I have also tried to follow a howto on a similar problem with a patch on [URL] But I cant compile, various error about dpkg. So my problem is, I cant get grub to work. It just gives me a blinking line and unsupported RAID version: 0.91.
View 2 Replies
View Related
Jun 29, 2011
migrate an installed Ubuntu system from a software raid to a hardware raid on the same machine? how would you go about doing so?
View 1 Replies
View Related
Nov 26, 2010
I have installed Ubuntu on my m1530 since 8.04 and currently dual boot Win7 and 10.10. I would like to dual boot on my PC, but I have run into a problem. I am not a pro at Ubuntu, but this problem I can not solve by reading forums like I have in the past.
I realize this is a common problem, but I have noticed people having success.
I have a M4A87TD EVO MB with two Seagate drives in Raid 0. (The raid controller is a SB850 on that MB) I use the raid utility to create the raid drive that Windows7x64 uses. I have 2 partitions and 1 unused space. Partition 1 is Windows, partition 2 is for media, and the remaining unused space is for Ubuntu.
I am running ubuntu-10.10-desktop-amd64 off a Cruzer 16GB flash drive that was installed via Universal-USB-Installer-1.8.1.4.
My problem like so many others is that when I load into Ubuntu, gparted detects two separate hard drives instead of the raid. I read that this is because kpartx is not installed on 10.10. I then went in LiveCD mode and downloaded kpartx from Synaptic Manager. Gparted still reported two drives. I opened terminal and run a few commands with kpartx. I received an error. (Forgive me I didn't write it down, but I believe it said something about a communication error. I will try again later and see.)
Currently I am reflashing the Cruzer with a persistence of 4GB. I am not familiar with this process, but I understand that my LiveCD boot will save information I download to it. I decided to try this method because I was going to install kpartx and reboot to see if this made a difference.
I am looking for any suggestions on a different method or perhaps someone to tell me that the raid controller or some hardware isn't supported. I did install ubuntu-10.10-alternate-amd64 on my flash drive, but fail to get past detecting my CD-ROM drive since it's not plugged in. If this method is viable, I will plug it in. I also watched the ..... video were a guy creates Raid 0 with the alternated CD, but it wasn't a dual boot and didn't use a raid controller from a MB.
View 6 Replies
View Related
Mar 22, 2011
How long does hardware Raid card (raid 1, 2 drives)take to mirror a 1 TB drive (500gb used)?Is there a general rule of thumb for this?4 hours? 12 hours? 24 hours?
View 1 Replies
View Related
Aug 3, 2010
I am trying to connect a RAID Box to the server via LSI 8880EM2 RAID controller.The raid box is FUjitsu Externus DX60 with raid 1 configured.The server is Fujitsu Primergy SX300 S5 with LSI 8880EM2 RAID card.The external raid box is being recognised by the raid controllers bios.
The server runs CentOS 5.5 64bit. I have installed the megaraid_sas driver from LSI website and MegaCLI utility but CentOS still fails to see the box.MegaCLI utility, when launched from CentOS, recognises the raid box, CentOS does not(no mapping being created in /dev).
I have also tried to create a logical RAID0 HDD on one physical HDD(as seen by MegaCLI) with MegaCLI utility in CentOS.The result was success and the new logical drive could have been used, but when restarting the server, the controllers' bios fails with an error (not surprised(one logical RAID0 on one physical HDD)) and configuration is being erased.
Has anyone tried connecting 8880EM2 controller to a raid box with raid configured on the box, running it all under CentOS and what were the results.
View 3 Replies
View Related
Jun 12, 2010
I have two 1TB hard drives in a RAID 1 (mirroring) array. I would like to add a third 1TB drive and create a RAID 5 with the 3 drives for a 2TB system. I have ubuntu installed on a separate drive. Is it possible to convert my RAID 1 system to a RAID 5 without losing the data? Is there a better solution?
View 1 Replies
View Related
Jul 18, 2009
how can I create RAID 1+0 using two drives (one is with data and second one is new). Is it possible to synchronize data drive with empty drive and create RAID 1+0 ?
View 3 Replies
View Related
Feb 28, 2011
If I have a windows installed in raid-0, then install virtualbox and install all my linux os,s to virtualbox will they be a raid-0 install without needing to install raid drivers?
View 1 Replies
View Related
Dec 10, 2009
I am going to be using CentOs 5.4 for a home storage server. It will be RAID6 on 6 x 1TB drives. I plan on using an external enclosure which is connected via two SFF-8088 cables (4 drives a piece). I am looking to try and find a non-RAID HBA which would support this external enclosure and allow to use standard linux software raid.
If this is not an option, I'd consider using a hardware based raid card, but they are very expensive. The Adaptec 5085 is one option but is almost $800. If that is what I need for this thing to be solid then that is fine, I will spend the money but I am thinking that software raid may be the way to go.
View 3 Replies
View Related
Sep 15, 2010
It's been a real battle, but I am getting close.I won't go into all the details of the fight that I have had, but I've almost made it to the finish line. Here is the set up. ASUS Z8PE-D18 mother board 2 CPU, 8 Gig Ram. I recently added an OCZ Agility SSD, defined a raid 1 virtual disk on the 1 terabyte WD HDD drives, which will holds all of my user data, the SSD is for executables.The bios is set to AHCI. Windows 7 installed fine, recognizes the raid VD just fine.
I installed Ubuntu 10.04 by first booting into try and mode, then opening a terminal and issuing a "sudo dmraid -ay" command. Then performing the install. I told it to install the raid components, and told it to let me specify the partitions manually. When setting up the partitions, I told it to use the free space I set aside on the SSD from the Windows 7 install as ext4 and to mount root there. Ubuntu installed just fine, grub2 comes up just fine, and Windows 7 boots with out a hitch, recognizing the mirrored partition as I indicated previously. When I tell grub to boot linux however, it pauses and I get the "no block devices found" message. It will then boot, but it does not recognize the raid array. After Ubuntu starts up I can run "dmraid -ay" and it recognizes the raid array, but shows the two component disks of the raid array as well. It will not allow the component disks to be mounted, but they show up which is annoying. (I can live with that if I have to)
I have fixed a similar problem before by setting up a dmraid script in /etc/initramfs-tools/scripts/local-top ... following the instructions found at the bottom of this blog:[URL].. To recap: My problem is that after grub2 fires up Ubuntu 10.04.1 LTS (Lucid Lynx), it pauses, and I get "no block devices found" It then boots but does not recognize the raid array untill I manually run "dmraid -ay". I've hunted around for what to do but I have not found anything. It may be some timing issue or something, but I am so tired of beating my head against this wall.
View 4 Replies
View Related
Oct 14, 2010
I work at a local computer shop as a computer technician and we get many computer in daily that require external virus scans (having to take out the hard drives, sticking it in another machine) just to scan (if we're lucky we can sometimes just do it in safe mode).Now what I want to know is...
1. Is it possible to install Ubuntu to an external HDD and use it virtually anywhere I plug it in? Will it pick up the network card, graphics card, etc so I can just plug and go? (Of course there are drivers for some computers).
2. Is it possible to run a Windows oriented virus scanner on Ubuntu? I know I can use WINE to run Windows applications, but will it prove to be compliant with virus scanners as well?
3. The main reason why I want it to be able to pick up on hardware and just work is because I plan on using it for schooling / travelling as well, have all my documents etc saved on it for easy access.
I've used Ubuntu in the past on an old laptop that didn't have much memory, small HDD, and a crap processor but that was 5-6 years ago (I still have the disk they sent me for free ).
View 3 Replies
View Related
Jul 11, 2010
I installed Ubuntu on external USB hard drive and while booting I did got option to log into windows XP, Ubuntu. Both operating systems ran fine. i.e. GRUB had overwritten MBR and I was able to dual boot. Main issue: I have installed Ubuntu in external hard-drive so that I can use Linux whenever I want other people who are using same computer can operate on WindowsXP. Sometimes my external hard drive gives problem if there is loose connection and so that oper people using computer do not face any problem I want to disconnect external USB HD whenever I am not using Linux. GRUB menu was pointing to external hardrive so disconnecting it meant my system wont boot!!I rewrote MBR using WindowsXP CD recovery mode. Now I am unable to boot from external USB hard disk( I thought I would be able to if I choose USB hard drive in BIOS option but it did not work it logged into WindowsXP by default).Is there any way I can change WindowsXP boot.ini file so that it also shows Ubuntu in external hard disk? Or is there any way.(I do not want GRUB way as then I would have to keep my external drive connected to log into windows - which I do not want).
View 1 Replies
View Related
Jul 21, 2011
I am looking to convert a raid 1 server I have to raid 10. It is using software raid, currently I have 3 drives in raid 1. Is it possible to boot into centos rescue, stop the raid 1 array. Then create the raid 10 with 4 drives, 3 of which still has the raid 1 metadata, will mdadm be able to figure it out and resync properly keeping my data? or is there a better way to do it?
View 2 Replies
View Related
Mar 24, 2011
I have a box that doesn't have a Raid controller or a software raid running currently. I would like to make it a RAID 1. Since it seems there isn't any IDE RAID controllers hardly around, I have another HD that is the exact model as the drive currently in the box running CentOS. Can I some how add the second drive and get the box to mirror from here own out? The box gets really hot and I want to be ready for a HD failure.
View 3 Replies
View Related
Jun 24, 2009
I've tried to install Fedora 11, both 32 and 64 on my main machine.It could not install as it stops on the first install window. I've already filed a bug but really haven't seen any feed back yet.The bug has something to do with Anaconda and the Raid array but I really can't tell.
I have an Intel Board (see signature). I am running intel raid software under W7 currently.It works fine. But, I'm wondering, when I attempt to install F!!, is my current raid set-up causing problems? Do I need to get rid of the intel raid software and use a Fedor/Linux raid program to manage the raid array??
View 2 Replies
View Related
Jun 18, 2010
If i want to use an external usb modem by which i can surf through the net, is this possible in fedora. Because the software is always an .exe file which is only compatible with wndows. let me know if i can use and also let me know the procedure for using this
View 1 Replies
View Related
Dec 27, 2010
I have an external hard drive with an xfs partition on it. It was using an external journal, but in re-installing Slackware I removed the partition holding the external journal, forgetting what it was at the time. I didn't touch the contents of the external hard drive, but now I can't mount it and the various xfs programs seem to demand that it be mounted in order for them to change anything.Anyone have any ideas on how to change an xfs partition from external log to internal? Failing that, how do I get the information off it?
View 1 Replies
View Related
Dec 11, 2010
I plugged in my external dvd-r (asus) via usb. It showed me some message on shell, that it has detected the cdrom(although its dvd rom as well but nevermind) and its of ASUS. But how do i know which dev it was associated with in /dev/? Since i had to test something, i plugged it out, and save the output of ls /dev/ > ~/result.txt
after plugging the dvd-rom, i compared the results and was able to find that it was associated with simple cdrom i.e. /dev/cdrom. I wanted to know that is there any command that will tell me which /dev/ file was associated with external dvdrom? i tried to see in the following result
1) df -h ( no results, just the already mounted partitions)
2) fdisk -l ( same as above)
3) dmesg | tail (shown almost the same result as was shown on shell at the time of plugging the dvd)
View 9 Replies
View Related
Dec 7, 2010
I'm working on a server and noticed that the to RAID5 setup is showing 4 Raid devices but only 3 Total devices. It's on a fully updated CentOS 5 system that only has three SATA drives, as it can not hold anymore. I've done some researching but am unable to remove the fourth device, which is listed as removed. The full output of `mdadm -D /dev/md2` can be see below. I've never run into this situation before.Anyone have any pointers on how I can reduced the Raid Devices from 4 to 3? I have tried
mdadm /dev/md2 -r failed
mdadm /dev/md2 -r detached
but neither work and since there is no block device listed I'm not quite sure how to get things back in sync so it's only seeing the three drives.
/dev/md2:
Version : 0.90
Creation Time : Tue May 25 11:07:04 2010
Raid Level : raid5
[code]....
View 8 Replies
View Related
Oct 19, 2010
Consider the following setup: Ubuntu system installed on a separate SSD for speed. An ubuntu software RAID array consisting of X number of physical HDD's for storage (RAID6 or RAID10). RAID setup is done during system install. If I suffer a total crash of the SSD and loose my system, will I be able to, using a new system disk, "reconnect" to the RAID array even if the "mothersystem" of the software RAID is lost? If yes, are there any particular config- or system files I need to backup to be able to rescue the array or will it just be recognized "out-of-the-box" when reinstalling ubuntu?
View 4 Replies
View Related
