I'm learning with a local intranet server with Ubuntu Server 10.04. It works well:^) I have a back-up question: I want to buy a hard drive of some kind to back-up to. I imagine a USB Portable Hard Drive would work OK. I'd plug it in to the box and mount it and then run a back-up routine. Is a workable way to do it?
View 5 Repliesi installed quake 4 with id software's run file and copied the pk4 files to the folder but anyways, when i deleted the game, the free hard drive space didn't come back. i had 20 gig free before install and when i installed it, i had 18 gig free but then i deleted it and i still have about 18 gig free. it didn't free up any space when i deleted it.
View 2 Replies View RelatedI am using Asus eee PC model 1001P and I am running ubuntu netbook remix on it. I have a 160 GB hard drive. When I was installing ubuntu I assigned only 50 GB for it, thinking that I will use the remaining partition for windows. But right now after using UNR, I don't want to use windows at all. Is it possible that I can assign the remaining 100 GB unassigned partition back to Ubuntu without reinstalling the whole operating system again?
View 4 Replies View RelatedMy media library isn't huge, but it isn't tiny (~50 GB). Every month or so, I just manually copy ~/Music, ~/Pictures, and ~/Videos to my EHD, and delete the old backup. But this is far from ideal. It's pretty slow, for one thing (~50 GB all together). It also isn't versioned, so if I ever want to go back multiple versions, I'm out of luck.
Is there any simple, stable, incremental way to do this? I'm open to using traditional version control systems like Git for it, although I haven't used them before for anything other than code. Command-line is fine (especially if it's scriptable). I only need to back up these 3 folders--anything that's not media is stored in my Dropbox.
I have an OpenBSD and a FreeBSD system and a mac. I also have a Ubuntu server. What i would like to do is back up all these systems to an external hard-drive using rsync when the external usb disk is connected to my Ubuntu box.If i format the external usb disk with cfdisk and the create a non-bootable ext3 file system on this external disk and create and put all the necessary public keys on the Linux box then from the BSD's or the mac issue the command:
Code: #rsync --progress -avhe ssh --delete / user@ubuntuBox:/usb/disk/path/dir/ Will this back up the entire systems so that they can be restored in the event of an emergency? I should store each OS just in a separate disk file of the external usb drive each time right?? Because i would rather not have to format the external usb drive for each different OS. Would this work? and would the restoration command for these BSD's be:
Code:
rsync -avze ssh UbuntuBox:/usb/disk/path / I just need to know the basics. I'm sure given that i'll be able to automate the process. I don't want to clone the disks for forensics. I just want to have a way of restoring to a clean OS. This is the most basic question:All the howto's never mention whether or not you have to have an rsync server running on the machine your backing up to. So do you just push or pull from one end of the connection only or do you have to have a client at one end and a server at the other, as is traditional?
I'm a Linux college course student and can't et help from my "instructor". As part of my class, I've installed Fedora 12 on a secondary hard drive. I don't know the first thing about Linux and am totally lost trying to get back to my other hard drive to access the Windows XP OS. All my stuff for the courses I'm taking this summer are stored THERE. Can anyone help me with very simple, easy to follow instructions for how to get back to Windows AND also have access to Linus on the secondary drive?
View 10 Replies View RelatedA USB hard drive is used as backup drive.
When it is not plugged in, the system boots without any issues.
When it is plugged in, this hangs to the point I have to unplug the CPU.
I have a mini ITX computer that runs a software that I have been trying to clone to another hard drive as back up. When I do clone it, it is the exact same copy down to every byte. When I try to boot from the cloned hard drive, it starts booting, then displays some text:
Then is says some of the files are not found including a encryption signer key not found.
I do no know the next step I need to take. Is this becasue it is running off a different hard drive? I do not understand a bzImage too well, but does it have anything to do with that file?
How to format hard drive (with ubuntu 10.10 maverick, 32-bit vs.) and, after it will have been formatted, bring all system settings and programs which I run know back e.g. Compiz, browsers and other (of course without installing each one of it separately)? Is it possible to copy some parts of the HD and copy it after format?I can add, that I'm using now three partitions: dev/sda1/ (with Win7 OS � 64-bit, NTFS); dev/sda3 (with ubuntu 10.10 32-bit vs.; ext3) and dev/sda4 (linux swap); dev/sda4 (NTFS for storing files).
View 2 Replies View RelatedI have an OpenBSD and a FreeBSD system and a mac. I also have a Linux server. What i would like to do is back up all these systems to an external hard-drive using rsync when the external usb disk is connected to my linux box.If i format the external usb disk with cfdisk and the create a non-bootable ext3 file system on this external disk and create and put all the necessary public keys on the Linux box then from the BSD's or the mac issue the command:
Code:
Will this back up the entire systems so that they can be restored in the event of an emergency? I should store each OS just in a separate disk file of the external usb drive each time right? Because i would rather not have to format the external usb drive for each different OS. Would this work? and would the restoration command for these BSD's be:
Code:
I just need to know the basics. I'm sure given that i'll be able to automate the process. I don't want to clone the disks for forensics. I just want to have a way of restoring to a clean OS. This is the most basic question:All the howto's never mention whether or not you have to have an rsync server running on the machine your backing up to. So do you just push or pull from one end of the connection only or do you have to have a client at one end and a server at the other, as is traditional?
I've recently moved from Fedora 7 to Ubuntu Server 9.10. This server has been in operation for quite a few years, and currently has two 110 GB IDE hard drives in one volume group...I think they are both mounted at /.
What I want to do is the following:
1. Have the system files on the IDE volume group of /
2. Add a 2TB SATA drive, mounting at at /var/www/ I also want this partition to be extendable, if I want to add a second 2 TB SATA drive, to be "Volumed"?? with this one
3. Add another IDE HDD, mounting at /var/log
I remember I used (I think it was GParted...a GUI when I added the second IDE drive a couple years ago), but now I'm in a Terminal-only world. After I install the hard drives, what process would I need to follow to accomplish my above listed tasks?
I need some help on this one. I added an second internal hard drive to my file server, a 500GB WD. I want to use this drive as the primary storage drive for my file server, and I want to format it with XFS. I've found some guides showing me how to add hard drives, but they didn't really fit what I want to do. When I run fdisk -l this is what I get
Code:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0001af4f
[code]....
Disk /dev/sdb doesn't contain a valid partition table
I have Ubuntu 10.10 running on a HP Proliant DL380. The Server has 1 SCSI disk install which runs the Ubuntu OS. I recently added a new SCSI drive to the system (hot swap)
Run fdisk -ls
But it does not show the device.
I've also run
Code:
sudo rescan-scsi-bus.sh -w -l
which returned
Code:
0 new device(s) found.
0 device(s) removed.
I've have 4 other scsi bays which have the same result. I need to be able to see the drive before I can even mount/format.
I switch to linux 9.10 and I got webmin installed, I was hoping to set up samba so it would share my second hard drive over the network. Is there anyway I could share the second drive?
Here is my fdisk info.
Code:
Disk /dev/sda: 40.0 GB, 40037760000 bytes
255 heads, 63 sectors/track, 4867 cylinders
code....
Edit, Can you find out the ip of the server via commands not like this ip 192.168.XXX.X
I am running Ubuntu Server and I recently added a new hard drive to the mix. Not replacing the old one, but adding a second one.What I want to know is how to I access that hard drive? I know in the desktop version it auto adds it, but not in the server version I checked my media folder.I installed it to be my new Samba share hard drive. So how to I get at it to use it?
View 2 Replies View RelatedHave just installed Ubuntu Server 10.04 on a dell with a perc 700 raid card. Running a mirrored raid1 (2x 500G as one drive). All went well. Have installed a basic Gnome front end and Webmin. I want to partition the hard drive into system and data storage areas. What is the best way to do this with a mirrored RAID system?
View 5 Replies View RelatedI have attached a 1.5 TB external hard drive to my new Ubuntu server. I mount it in /media/external. I used sudo mount /dev/sdx# /media/external but sdx# keeps changing. I added a line to fstab to mount it permanently but after couple of our it unmounts itself and /media/external is empty. It is in vfat format but webmin shows it as ntfs.
Quote:
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[Code]...
Alright, this hard drive that I need to mount is on a windows machine, in a different town. What would be the best approach for this?
View 4 Replies View RelatedI'm running Ubuntu 9.10 64-bit.
For some reason, the second hard drive (sdb1) is not automatically mounted:
rick@rab-1:/mnt$ sudo fdisk -l
Disk /dev/sda: 500.0 GB, 499989348352 bytes
255 heads, 63 sectors/track, 60786 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000c17f6
[Code]....
Before I installed Ubuntu, I installed the RAID software to handle 4 500 GB hard drives - so there are supposed to be two mirrored drives. I'm not an expert in using RAID. I'm assuming it is correctly configured. I only "see" two drives. sda has Ubuntu etc. How can I get sdb1 mounted? I've tried using the palimpsest program but I'm afraid I screw it up. Do I need to re-format sdb1?
Im usning ubuntu server 10.04 (Command-line)My second harddrive is FAT32 but i would like to change it to HTFS so i can store large files (larger than 2GB)
View 8 Replies View RelatedI am trying to use my external hard drive to store webpages and on the webpages it is uploaded to the folder. When i navigate to the address it says it is forbidden. I also noticed that it would not let me upload files to the folder it says i do not have permission. Can someone help me get passed the barriers. The hard drive is ntfs.
View 7 Replies View RelatedI'm trying to get my work's infrastructure built at home before I go up there and show the boss. It is as follows: VMware esxi installed on the server with:
Windows server 2008
Ubuntu 10.04 server
I've got VMware installed. And I have spent the past 7 hours trying to figure out how to manage it. I found out that vsphere has not nor will ever be supported for Linux; which was my first problem.
Second Problem So I had to dig around for a spare Windows 7 dvd. To my UN-surprise it blue screened before it even got to the Windows installer.
Third Problem So I dug around for my Windows XP disc. Wouldn't find my sata hard drive and I wasn't about to dig around for a floppy drive and disk, in order to install it.
Fourth Problem I remembered that I had a dual boot of Windows 7 downstairs and proceeded to download and install vsphere. It wouldn't install because of some updates that needed to be installed. I installed them and got vsphere installed as well. However upon connecting to my vmware esxi, there was yet another error that had to do with some update. I found out that the error had been existent since 2009 and for some reason NO ONE at VMware has fixed it....
I have a ubuntu 11.04 LAMP server at home.
Its runnign a few small sites on a drupal CMS.
This morning I found none of the sites were responding. The server itself sounded like it was thrashing the hard drive.
It wasnt responding to the FTP client or SSH connections. Web pages just sat there like they were loading very slowly but never actually loaded.
How can I find out what went wrong. I dont have a massive amount of experience with linux, particularly the server variant.
Its worried me a little that the drupal report shows several page not found errors like someone (a bot maybe) was trying to see what php setup files they could access.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedMy parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View RelatedSometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies View RelatedI have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies View RelatedI have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies View RelatedI have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.