Ubuntu Security :: SSH Remote Port Forwarding
May 13, 2010
I'm trying to SSH into my home computer from a remote location outside of my house's LAN and can't figure out remote port fowarding.
The guide here says to use the following:
Code:
I've tried connecting to my home computer through many combinations of the syntax listed above, read the man file, and looked online for help. But can't find out the proper syntax or a good guide that isn't written for Windows users using Putty.
Let's assume for the sake of simplicity that the public IP address of my home SSH server is 123.123.123.123, the private IP address of my home SSH server is 192.168.1.100, my home SSH port is 2222, and the SSH port at my current location is is 22. How would I write out the command?
Every time I try to connect I get a "connection times out" error.
View 9 Replies
ADVERTISEMENT
Aug 7, 2010
When I use the following command:
ssh user@ssh_server -L 5500:localhost:5500 -p 22
everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:
ssh user@ssh_server -R 5500:localhost:5500 -p 22
I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...
View 2 Replies
View Related
Jul 20, 2010
I tried to make "ssh tunneling", but failed and got this message.
Quote:
Administrator@windstory-PC /
$ ssh -R 7869:localhost:7869 windowsstudy@192.168.0.4
windowsstudy@192.168.0.4's password:
Warning: remote port forwarding failed for listen port 7869 Last login: Wed Jul 21 01:56:04 2010 from 192.168.0.2 -bash-3.2$
1. system environment
192.168.0.2 - windows 7 + copssh
192.168.0.4 - centos 5.4 x86 + openssh
2. Guide for setting "ssh tunneling"
[URL]
3. Added this to sshd.conf
Quote:
AllowTcpForwarding yes
4. "netstat -na|grep 7869" at 192.168.0.4
Quote:
[root:maestro:~]# netstat -na|grep 7869
tcp 0 0 0.0.0.0:7869 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:7869 127.0.0.1:53539 ESTABLISHED
[code]....
5. result of "ssh -vvv -R 7869:localhost:7869 windowsstudy@192.168.0.4"
Quote:
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
[code]....
6. I added 7869 for telnet service as follow;
Quote:
mytelnet 7869/tcp # My Telnet server
View 1 Replies
View Related
Nov 1, 2010
sudo ssh -L 750:192.168.123.103:873 username@192.168.123.103It does exactly what it's supposed to do, but how do i edit / remove this rule?Is there some config file where i can alter the forwarding? How does it get stored?Im using Ubuntu 10.10Server Edition (allthough i recon it would be pretty much the same across all versions
View 5 Replies
View Related
Apr 27, 2011
I'll explain this in one sentence: Is it possible to program a port-binding shellcode in which people across the Internet can connect to, without being thwarted by the router blocking their data because the port its bound to doesn't allow port-forwarding
View 2 Replies
View Related
Mar 31, 2011
I'm trying to implement remote NFS in our network
So I read a lot of posts on the Internet, but I don't understand which ports I have
to open/forward for this.
On some posts I see a lot of ports, I don't want to do this.
If this is the case, and I would set up NFS through an ssh tunnel, then do I only need the ssh port and does this mean it will always work if the server is reachable through ssh?
Or is this wishful thinking ?
View 4 Replies
View Related
Nov 11, 2010
As it stands I have a small home network operating behind my modem/router. Some of the ports on this are forwarded to my PS3 for gaming but I was looking at forward some for my file server.
At the moment I've forwarded port xxx22 to port 22 on my server for SSH for instance. ANd similarly 21 for FTP (although it doesnt seem to want to connect for any more than a few seconds using that). What I was thinking of doing was placing a small website for a handful of ppl to use on the server too and port forward again - xxx80 to 80. It works just fine but I'm a little concerned on the security front.
As I've moved the port to something different from the outside world I'm presuming I will have already cut the potential for malicious folks to wander in but is there anything else I should be doing? At the moment there's no firewall operating on the server, usually as its hidden behind the modem/router. But if I open this thign up more permanently what should I be doing? I've read a few articles on it but I'm always left with the overwhelming thought of "Thats if theres no firewall in my router" as they just seem to do the same.
View 5 Replies
View Related
Feb 10, 2009
I've recently installed OpenVPN on my dedicated server (Fedora) in order to have full internet access for all of my WinXP clients. In case somebody is interested in the details of the OpenVPN installation, I followed this documentation: Rootserver-as-OpenVPN-Gateway. The installation runs quire nicely, I'm able to surf the net and even file-sharing programs work on the XP clients - at least to some extent. There is a slight problem though: the file-sharing programs complain that they have a "NAT problem" or that they are "Firewalled".
Most likely, this problem can be addressed by configuring remote port forwarding (RPF) on the server. The only routing rules which I've added on the server during the OpenVPN installation are these:
Code:
# initialize natting for openvpn
iptables -t nat -F POSTROUTING
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o eth0 -s 10.66.66.0/24 -j MASQUERADE
Let's assume a certain application on a client is listening on e.g. port 1234. How do I configure RPF for this port on the server side.
View 1 Replies
View Related
Feb 4, 2010
Up to now I've been playing with Ubuntu whilst storing important data elsewhere for about 2 years. Now I'm ready to move to Ubuntu completely but want to address my security.I'm currently using a desktop and server behind a hardware firewall / Internet router. The router has DynDNS and forwards port 80 to the webserver and a port I picked at random to the desktop 22 for SSH with private keys. SSH passwords are disabled.
The first question is, is there a danger of running different security levels on the two machines? I don't care about the server, there is no data on it so I currently forward port 80 and am considering forwarding ports 631 (CUPS) and a port for LDAP. Will this effect my desktop (which has info I don't want to loose).The next question is whether port forwarding / hardware firewall is actually a safeguard against attack.
View 3 Replies
View Related
Sep 5, 2010
I've got two virtual machines running, the first VM (VM1) has two network interfaces, one bridged with my real lan, one a private subnet. The second VM (VM2) has one nic, only on the private subnet.
I have VM1 acting as a router for VM2, giving access to my real lan for internet access. The problem I'm having is I cannot get VM1 to forward ports 80 (http) or 222 (ssh) to VM2 from my real lan.
Here is the script I've cobbled together from various (foreshadowing!) locations:
Code:
View 1 Replies
View Related
Dec 12, 2009
I have just set up shorewall on my router running Arch Linux. The external network is on eth0 and the internal network on eth1.I have set it up for masquerading and that works fine and I can open ports to the firewall. But I'm having trouble with port forwarding to my internal machines.The problem I have is that when port 22350 is forwarded to 192.168.1.3 on my local network, checking the port with nmap from a remote computer gives me:
Code:
PORT STATE SERVICE
22350/tcp closed unknown
[code]....
View 2 Replies
View Related
Dec 7, 2009
If I forward port 5764 to port 80 to my VOIP device, I can nmap and get a proper connection. If I forward port 5764 to port 22 to my server, it comes up filtered. It even happens if I try forwarding port 80 to my server. So I'm sure it has something to do with my server, but I'm not sure.Here's my Linksys iptables:
Code:
:wanin - [0:0]
-A FORWARD -i vlan1 -j wanin
[code]....
View 2 Replies
View Related
Jul 22, 2010
I'm having a mare with SSL with Apache. I have set it up and if I go to the follwoing address http://192.168.1.2 it seems to work and the pages are delivered to my browser. However if I try to access it from an exernal PC it will not work.
I can get to the non-ssl part of the site so the static ip is resolved and the port forwarding all works.
Does any one have any ideas (and in fact i think I may have just solved it - Ports - 80 mis open but I haven't done anything with 443. Will check it out and post back.
View 1 Replies
View Related
May 31, 2011
I wish to install a remote server up, for controling my machine, it would be nice to have something like VNC / Team Viewer and ssh, but I don't trust ssh/vnc/team so mutch after seeing this movie:[URL].. Shoud I change the ssh remote port to smtg like 61982 instead of 22?
View 6 Replies
View Related
Mar 28, 2010
I'm not that great with mailservers, and just been thrown a curveball with a MS Exchange environment for which there is apparently no solution... yeah, right. But is there a workaround?
The problem is that the site mail (SMTP) needs to be sent via port 26 instead of the commonly used 25. Port 25 is mapped to a mailfilter, which apparently causes havoc with some of the mail, and the techs that have been on site trying to coax the Exchange server to co-operate have said that the only way would be to get rid of the filter.
The problem is that there are number of apps that are unable to have the outgoing port changed and so keep sending mail out on port 25.
I look after the Unix/Linux side of things at work, and I was wondering if there was an easy way to set up a Ubuntu box to receive mail on port 25 and just forward it to the MS box on port 26? So, in other words (and I hope this makes sense): monitor port 25, and forward whatever comes in on port 25 to the server on port 26. Simple portforwarding, or is it? What steps do I need to take?
View 2 Replies
View Related
Jul 14, 2011
I want to set my ip as static and port forward it through a specific port can anyone help me with this im using ubuntu 10 with 64 bit OS
View 1 Replies
View Related
Dec 1, 2010
I have set up a user to login remotely to our Red Hat 5 server via SSH. A rule in our department firewall enables this user to login from a single static ip address. The ssh port on our server is 22. I am able to login to port 22 from locations within our department firewall. Our administrator says the firewall configuration is unchanged. The remote user had been successful logging in. But now the remote user gets a Connection Timed Out message, before being asked to authenticate by the server.
I regenerated security keys, but the remote user still gets the connection timed out message. (I can login locally with the new keys). I suspect either a firewall or an authentication problem--inclining a firewall problem. Am I correct? Is there a Linux command to check whether port 22 is available or blocked, prior even to authentication, for login from the user's remote location?
View 3 Replies
View Related
Mar 25, 2010
I have a mail server on which I would like to block port 25 on my eth0 for everyone except our external spam filter. the problem is that I want our users to be able to connect via port 10025 which is forwarded to port 25, which then is blocked...
View 2 Replies
View Related
Oct 24, 2010
I had to add them to my firewall script when I installed openvpn on my dd-wrt router:
iptables -I FORWARD -i br0 -o tun0 -j ACCEPT
iptables -I FORWARD -i tun0 -o br0 -j ACCEPT
iptables -I INPUT -i tun0 -j REJECT
iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE
what should I add/change to set up port forwarding of port 1000 to ip 192.168.1.200. also how to get the answer sent by 192.168.1.200 follow the same route used by the data received through port forwarding.
View 1 Replies
View Related
Jan 24, 2010
I am having issues with the DREADED port forwarding. *why* is this important? *why* does it become such a chore to change? trying to run xlink kai on karmic. i have access to the routers in the house. the primary (#1) router is a standard issue Linksys, the other router is my DDWRT router which connects wirelessly to #1.
View 3 Replies
View Related
Oct 28, 2010
i have already changed the sshd_config file but anyone who logs in can access to the internet what should i do?
View 5 Replies
View Related
Nov 21, 2010
I have a ubuntu 9.10 on my desktop in my office and I have another ubuntu on my home desktop. Both machines are behind a router. I guess many people have already asked the same question: how to remote control the office desktop from my home desktop?Many posts discussed about solving this by setting up ssh and port forwarding. But my situation is that I cannot control the router in my office so I cannot set up any port forwarding for my office desktop. So I guess my question becomes how to remote control my office desktop without setting up any port forwarding on the office router.
View 3 Replies
View Related
Mar 26, 2011
I currently use a commercial VPN when working overseas for secure internet access.
I now also need to VNC to a home ubuntu desktop (which runs software 24/7 that I need to periodically check).
When overseas, I use a Ubuntu laptop and an Android tablet.
For the VNC I intend to use an SSH tunnel. So my question is: should I ALSO set up openVPN on the home computer (so I can stop paying for a commercial provider which routes all my traffic twice across the Atlantic...) or is it easier/better to use the SSH tunnel for the secure webbrowsing too? Something like a SOCKS proxy?
View 8 Replies
View Related
Oct 21, 2010
my ftp (with SSL) server is behind firewall.
Code:81.81.81.81 FIREWALL (my external address) 192.168.1.5 - FTP server How to create portforwarding for such a configuration. I`m not interesting about iptables rules. I would like to know which port should I redirect and how ? FTP server usualy using 20 and 21. What about VSFTPD with SSL ? Also 20 and 21 ?
View 1 Replies
View Related
Mar 5, 2011
I did local apache server at internal ip 192.168.1.2 and i wanna to do port forwarding to enter to it by my external ip address ?
View 4 Replies
View Related
Jan 31, 2010
I have a script to establish a reverse tunnel with other machine,My problem is to stop the tunnel. If I just kill the PID at sshtunnel.pids, ssh does not release the ports at the server side, so any new connection will fail for several minutes.Is there any way to signal SSH to exit gracefully?
View 5 Replies
View Related
Feb 20, 2010
This should be easy but for some reason its not working. I don't have admin rights on one of my local networks to open the firewall for port 80 to make my server accessible remotely (from the internet). I have a remote server (OpenVZ VPS) and I want to port forward so that [url]:8080 will point to my localhost:80 from the internet itself (i can get it to work on the remote VPS server's local network)...
How could I accomplish this? Basically, I am trying to serve webpages from behind a firewall using a VPS as a hub.
View 4 Replies
View Related
May 6, 2010
would it be possible for anyone to give me step-by-step instructions on how to set up port forwarding on my laptop? I've been using Karmic Koala and just upgraded to Lucid Lynx and not really bothered to port-forward before, so not too sure where to start - googling gives me a lot of terms I don't understand.
View 1 Replies
View Related
Jul 6, 2010
I have two nic cards installed in a Lucid LTS server.
eth0 is static using
address 192.168.0.235
gateway 192.168.0.1
netmask 255.255.255.0
[Code]...
I have my Qwest DSL modem port forwarding port 80 to 192.168.3.235 however this doesn't seem to work if I have both cards running. If I remove the second card (eth1) and reconfigure eth0 to use 192.168.3.235 I can port forward into my webserver.
View 1 Replies
View Related
Aug 22, 2010
I have logged into my router and set up port-forwarding on port 22. I can log into the machine fine from a machine on the local network using the machines internal IP but when I try to log on from a remote machine using my router's external IP or my DyDNS host-name I get a message saying "connection refused" or "connection timed out." I have configured port-forwarding on the router and the firewall rules says that port 22 is open but when I nmap my routers external ip it says that only port 23 and 80 are open. I am very new to linux and networking.
View 8 Replies
View Related
