Ubuntu :: OpenVPN-ALS (Adito) On Lucid - Service Starts Then Dies "Exception In Thread "main""?
May 21, 2010
this is an error in java not knowing its classpath. IANAP, and could use some help in resolving this.I've followed the instructions available at various sites, and the installation went fine.When I start the service I get the following in the wrapper.log:
Code:
root@twin:/etc# service adito console
Running Adito...
[code]....
View 3 Replies
ADVERTISEMENT
Feb 25, 2010
Alright, I've been trying to get this fixed on my own, but I think I am missing a fundamental principle and no amount of scripts or hacks is gonna take place of that. I have adito/OpenVPN installed on my media center. It runs fine and I can access adito in my internal network from other computers just fine. But, the whole point is I want to be able to access it remotely!
Now, I had previously made a run at an external FTP site and failed miserably at that, and I think its all coming down to me not knowing how to configure my own router. I have a Netgear router, I can log into it and under Router status I can get what looks to be my routers external IP address. But if I try to access it at https://XXX.XXX.XXX.XXX:4433 (didn't want to use the default port, 443) I get nothing.
So, my main problems as I understand them are:
1)I need to clear the firewall on my router to allow traffic in/out of my reserved port
2)I need to forward incoming requests on that port to the static internal IP of my media center
3)I really would like a more reliable way to verify the info im getting from my routers admin settings page is actually my external IP, is there a command for this or a website that will tell me?
View 2 Replies
View Related
Jul 25, 2010
Working with Amahi server and the VPN app. WHenever I want to activate a VPN tunnel thru ssl, the VPN server starts up "Adito" agent. Normally in Windows, the agent pops up with a browser and basically lets you surf inside the VPN.But when I use my Ubuntu, it says it's starting teh agent and then it just sits there and stalls out with failed to sync.I checked the logs and this is all I got:
p kernel: [29491.039030] type=1503 audit(1280097273.298:147): operation="file_mmap" pid=8323 parent=8320 profile="/usr/lib/firefox-3.6.7/firefox-*bin//firefox_java" requested_mask="mr::" denied_mask="m::" fsuid=1000 ouid=1000
[code]....
View 2 Replies
View Related
Sep 10, 2010
I am running Server 10. I have a requirement to perform an action before the MySQL service starts, and perform another action after MySQL service stops.
I found the init script for MySQL under /etc/init/mysql.conf. I added my thing to the pre-start script there and works fine.
I am having trouble finding the script that stops the server so I can modify.
View 1 Replies
View Related
Oct 30, 2010
Got a Zimbra server FOSS edition running on CentOS5.5. Everything was running fine until couple of days just found out that web administration interface just does not give the proper status. Web console says that none of the services are running which infact is not true. Only service that is not running is logger. This is the zmcontrol status output
Code:
antispam Running
antivirus Running
imapproxy Running
ldap Running
[code]....
Just the logger service is not running all the others are. But web admin interface shows all are stopped. Also it can be seen that zmlogswatchctl is not running. Starting it manually does not do any good. It does not start and it dies out by itself.I tried to google and found a couple of bugs related to logger and web interface but those were old and should have been done in this version 6.
View 2 Replies
View Related
Jul 21, 2010
working on a script to update .Jar file, I have tried jar xf to unpack and jar cf to repack it is giving me java.lang.NoClassDefFoundError exception at main class. I also tried jar uf, which is also not working for me Basically my jar file requires to update date, which i do from "winrar" Manual it works fine, but now to remove "Donkey work", i want to make an script which does this all automatically, and the last stage is to update jar file which is not happening.
View 1 Replies
View Related
Nov 24, 2009
It is the first time have I used VPN. I installed OpenVPN in my Fedora 11 computer. I did it following:URL...And I stopped at step 16: service openvpn start . The service can not start up. Even if I disabled Selinux . Does anyone know how to treat this trouble.
View 1 Replies
View Related
Apr 28, 2010
I posted this on Launchpad under bug# 569445 and though I'm certain someone in our heroic development community will have a look at it eventually, maybe someone can help me here in the meantime, or at least provide some background info. Maybe a little reassurance that Ubuntu isn't broken for my Wifi is all I need.
Quote:
Binary package hint: wireless-crda I do hope I've picked the right package for this. Investigators, feel free to email me with whatever bash commands you need me to find out more about the hardware. The problem is that wireless in Lucid is dying for me after about a minute or so, and the activity light on my netbook just flashes. The wireless monitor at the top of the screen still thinks it's connected. It's like it's out of sync or something.
This doesn't happen under Win7 on this hardware, nor does it happen to other devices in my house on the network. Also, I wasn't having this problem under Lucid Beta 1 I have an Acer Aspire (Olympic Variant) 1410 Win7 reports the adapter as Intel WiFi Link 1000 BGN The wireless router I'm using is a DLink DIR-628. The connection is OPEN.
View 1 Replies
View Related
May 4, 2010
how to move the thread [URL]...
View 9 Replies
View Related
Apr 12, 2010
i just installed Fedora 12, clean without anything change in it. I opened services dialog, and the openvpn service have status:dead, however it shows that it is enabled.when i try to run it as:/sbin/service openvpn start.It write OK. However if check it:/sbin/service openvpn status it write that service not running. What is a point of a problem? I have opened openvpn in FireWall,however without success, may be some additionsl services for openvpn are not running?
View 1 Replies
View Related
Jul 13, 2010
I can't get my openvpn work if the firewall is on , and I also don't see any option to allow openvpn service in firewall allow service.
View 1 Replies
View Related
Jul 21, 2011
WHEN I START /openvpn /etc/openvpn/server.conf im getting the following error i had installed the configuration by following link [url]
I had pasted i error log below:
View 1 Replies
View Related
Mar 1, 2011
How does a C program start in linux? Is main() the first function called in the a c application by kernel. I understand it is the first called function written by the application programmer, but the question is to understand the what all kernel does and what all functions it calls before calling main()
View 9 Replies
View Related
Jun 15, 2011
I've installed MongoDB and I want init to start the database with the --journal flag. I'm quite rusty on how init works, but I know it involves the /etc/init and /etc/rc directories.I've found /lib/init/upstart-job and someone in the chat is suggesting that I just edit that bash script, but I can see it's involved with more than half the system service, so I'm a little hesitant to edit it. In fact, I'm pretty sure if I followed that advice I'd really screw up my system and then the person "helping" me would just stop responding.
View 1 Replies
View Related
Mar 8, 2011
Am trying to set up a new system but am getting some strange behavoir. I've administered an Irix system before. I have opensuse 11.3 installed with gnome running. When i enter a bad user id in the windows login screen, the bad authentication causes the x window manager to crash and leaves the system in the ascii terminal mode login. I then have to login as root and do an init 3 , then init 5 to get the x server started again an get the windows login started. Has any one seen this behavior before and how can i fix this. Been hunting through /etc/X11/xdm to see what startup scripts could be causing this.
View 2 Replies
View Related
Aug 21, 2011
I want to run 1 instance of x11vnc at boot after gdm starts, itsa remote vnc server that will work without me first loggin in
Im just not sure where or how to start it when computer boots? i can run it on another tty and connect so its all setup but not sure what the "right" was is.
View 5 Replies
View Related
May 22, 2010
In linux, creating thread is same as process (clone()), except the virtual address space gets shared with the parent.If a running main process(thread) creates new thread, and if main thread exits, why should the new thread too exit? both are different entities, The same doesn't happen if the child thread exits, the parent thread would be alive.
View 1 Replies
View Related
Apr 29, 2011
dear, in centos / fedora, I can config to start a permanent vnc session by setting the /etc/sysconfig/vncserver file when the system starts. Is there any similar configuration in opensuse which give me a permanent session?
View 6 Replies
View Related
Jul 6, 2010
I am using centos 5.5 x85_64 2.6.18-194.3.1.el5 The server is hanging at start up due to the follwoing error
udevd[746] nss_ldap reconnecting to LDAP server (sleeping 4 seconds)
udevd[746] failed to bind to LDAP ser er ldap://192.168.0.100 cant contact ldap
It fails and then tries again, and again, each time increasing the sleep time. This is happening before network sercvices are started so ther is no way it can connect to ldap. anyone know a way to fix this problem?
View 2 Replies
View Related
Jul 27, 2010
i have added a vpn connection on my Lucid desktop machine, but every time i try and connect, it fails. I also have the same, identical vpn connection on my karmic install on my laptop. everything works perfectly on Karmic, but Lucid is having problems. I have followed identical steps for creating the vpn connection on both machines: vpn connections can be made in 2 ways, the first is through the network manager, but trying to connect through the nm-applet returns an error about vpn failing to connect and "no valid vpn secrets".
I suspect this is at the root of the problem. The only way for my Lucid machine to successfully connect through the command line is if I run the openvpn command under sudo.
View 2 Replies
View Related
Jul 16, 2010
Firefox is set to launch automatically at startup. It regularly starts up in offline mode. Then, once wireless connection is established, I have to restart FF in order to get it to browse the net.
This has been amply discussed and fixes have been suggested. I've tried at least three modifications using FF's 'about:config', but to no avail.
View 9 Replies
View Related
Jun 6, 2010
I've been using conky for some time now, and I haven't changed conkyrc for a while. However, when I installed lucid (fresh install) conky starts wrong with ubuntu, like in a glass box that overlaps any window. The weird thing is that if I kill conky and start it over again manually (without the script in preferences->startup applications) it is OK. Screenshots: [URL].
Code:
# Rendimiento
update_interval 1.0
total_run_times 0
double_buffer yes
background yes
use_xft yes
xftfont HandelGotD:size=9
xftalpha 0.5 .....
View 8 Replies
View Related
Dec 25, 2010
I am going to use "pthread_setaffinity_np" to bind a thread to a specific core. My application has two threads. I have used mutex to assign a specific id to each thread and then bind that thread to a core different from another core. but it seems that the os assigns both thread to one core.What should I do to bind each thread to a specific core?
View 4 Replies
View Related
Jun 21, 2010
I tried to install Ubuntu netbook remix Lucid on a Lenovo IdeaPad netbook with an Intel Atom processor and a SSD HD 4 GB and a SATA HDD of 160 GB. The installation starts normally, but stops on step 3 of 7, where I choose my keyboard layer...it never passes on to step 4 of 7. I must mention that I had a corrupted installation of Windows XP running on it...I made an USB bootable disk, and everything goes fine untill step 3 of 7.
View 3 Replies
View Related
Jun 4, 2010
If I let my computer sit for about 10 minutes, I lose all the windows I had open (gnome) and i get a message saying I'm running in low graphics mode. I have to restart X in low graphics mode to get it to work. i can't tell the difference, but as an avid writer, I often feel the need to get up and think about whatever I have open in oowriter.
View 3 Replies
View Related
Jul 3, 2010
I recently installed 10.04 with a realtime kernel and after running some upgrades I can now no longer log in. It was previously set to automatically log in, now I get to the log in screen, click on Automatic Login and it says: Unable to open session. If I click my username and then enter my password it says the same thing. I can ctl-alt-F1 to the CLI and if I then enter username and password I get:
Code:
Last Login: Sat Jul 3 12:24:51 BST 2010 on tty1
Linux james-laptop 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC 2010 i686 GNU/Linux
Ubuntu 10.04 LTS
Welcome to Ubuntu!
* Documentation: https://help.ubuntu.com
0 packages can be updated
0 updates are security updates
[Code]...
View 3 Replies
View Related
Apr 23, 2010
when i am tryg to upgrade to lucid from karmic, update manager starts and shows my system is up-to date. command used "update-manager -d"os karmic 64bit.
View 2 Replies
View Related
Dec 3, 2010
I'm not really sure what the problem is here, but sshd does seem to start on system boot. tty1 does list "OpenBSD Secure Shell server" at least. Also, # service --status-all; indicates that sshd is running, but if I try and actually ssh into my box, I get a "Connection refused" response.
I am, however able to restart the service manually and everything magically works again. Odd...?
View 1 Replies
View Related
Apr 5, 2010
i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
View 1 Replies
View Related
Aug 9, 2010
i have installed openvpn and config it for a tunnel. my server.conf and client,conf is as follow:
server.conf
port 1194
proto udp
[code]...
View 1 Replies
View Related