I have the problem that whenever I write something it freezes up the window, my processor use rise to 100% and then it crash showing the OpenOffice.org crash-screen. This only happens in Writer and not Spreadsheets, Presentation refuses to start.
Info about the system:
OpenOffice:
OpenOffice.org 3.2.0
OOO320m12 (Build:9483)
[Code].....
Edit: Reinstalling the entire package and rebooting did not fix this issue.
Am having issues with compatibility b/w OO Writer and MS Word. I desperately need to use track changes, and would love to abandon MS Word altogether. However, using OO Writer, any tracked changes I make to MS Word documents do not translate well. In MS Word, the changes are there (I can view the initial document, and the final document), but there is no way to see the combination (i.e, a marked up copy).
Can anyone tell me whether this is normal, or whether it is just me? Once I get comments and tracked changes working perfectly, I should be able to switch completely. But until then, I must stick with MS for work.
In previous versions of Ubuntu and OpenOffice.org I could easily dock the navigator to the right or left side of the screen by simply moving it there. A faded outline would be created and it would snap into place. In 10.04, I can't do this. Does anyone know how to dock the navigator in OpenOffice.org?
View 2 Replies View RelatedI've OpenOffice v3.2 installed on my ubuntu lucid lynx. I've recently installed the Sun Weblog Extension on it. It should help me post to my blogs, but as I tried searching the internet I came to find out that I had to install some sort of update. I don't know what that update is. The place where I got that info is from the following online pdf document.[URL].. I also tried looking at some blog posts which tried to explain how to do the setup for the extension. But the settings screen turned out to be blank. The place where I got this info was here [URL]..
View 1 Replies View RelatedIn my table, whenever I enter true or false in any cell, Writer changes it to all Caps, so true becomes TRUE and false becomes FALSE. Now I did not set the cell type to BOOLEAN. If I do Format > Change Case > Lowercase it changes, but reverts to all caps the next time the document is opened. I have checked autocomplete, autocorrect, table number format but seem to change this behaviour.
View 2 Replies View RelatedOpen two different instances of OpenOffice Writer (two separate entries on the task bar). In one of them type the word test and highlight it and leave it that way. Now using the mouse pointer try switching between these two different OpenOffice Writers on the task bar. There shouldn't be much of a switching delay if any, going either way.
Now go to the OpenOffice Writer with "test" highlighted. Hit the <ctrl>C (copy) key about five times rapidly, then immediately click the mouse on the other OpenOffice Writer on the task bar. I am seeing up to a 5 second dead time delay between switching. There is no "busy" indication from the mouse pointer. The mouse pointer moves, but any clicks will not take effect during the 5 second delay, then any mouse clicks quickly take effect in a cascade after the delay is over.
Sometimes Klipper looses the <ctrl>C (copy) "test" text (Klipper still displays it its history) and refuses to <ctrl>V (paste) "test" any longer. When Klipper reaches this state a single <ctrl>C (copy) of "test" will cause the up to 5 second delay when switching.
The delay is only noticeable if you immediately switch on the task bar. If I do the copies and simply wait at least 5 seconds before switching, there is no delay. So, the switching itself isn't the cause.
I have reproduced this on PCs in a 32 bit 11.2 install and a 64 bit 11.2 install. Both installs are KDE 4.3.3 release 3 repos. Either this long delay shouldn't be happening or the mouse should at least do its busy indication thing and not act like everything is normal when it isn't.
In spite of the fact that the printer set-up is working with the Gimp and other more involved print-capable programs.
The printer is a Dell 3100cn color laser printer.
The best driver I found was one I got off of Dell's site - it was an RPM that I aliased (I'm using Debian lenny).
I set Openoffice Writer's printer configuration to "letter."
I check the settings in the print pop-up before I print.
And then the printer asks me for A4 paper.
How do I make it so that when I add lines to a page, it doesn't make the text on the next page move further down? I'm trying to make sure my sections will start on the same page as I typed them when a Windows user opens the Word document (which is what I will be exporting this as) in their Microsoft Office. I'm using OpenOffice.org 2.4.1 on Ubuntu 8.10.
View 3 Replies View RelatedI'm trying to find a way to represent relational algebra symbols such as the funky bowtie for equijoin in OpenOffice Writer.. I can't find anything in special characters. Has anyone figured out how to show the symbols?
View 3 Replies View Relatedspellchecker for openoffice.org writer not working. know how to fix it?....or what packages to add...or whatever?
View 3 Replies View RelatedHP DJ1520
CUPS
print options set to color in both OS printer-options dialogue and CUPS browser dialogue.
printer successfully prints color test page from CUPS browser dialogue.
openoffice Writer print-preview shows document in color.
openoffice Writer printer-dialogue options set to color.
HP DJ1520
CUPS
print options set to color in both OS printer-options dialogue and CUPS browser dialogue.
printer successfully prints color test page from CUPS browser dialogue.
openoffice Writer print-preview shows document in color.
openoffice Writer printer-dialogue options set to color.
I've just installed Scientific Linux 6 (equivalent to RHEL 6) with OpenOffice.org 3.2.1
If I click on a file to open it with Writer, the program locks up. If I run Writer first and load the file, all seems to be well. But if I launch Writer from the command line, I'm left with the error
The ? are my insertions, replacing invalid codes.
This happens with all text files, new or old. Has anyone else seen this, and is there any solution other than re-installing OpenOffice?
I'm trying to create an AutoText shortcut for " (used in PHP to escape the quotation marks). I'm running into two problems:
1) If I hit the shortcut without inserting a space first (eg, name=", where " is the shortcut), AutoText wants to treat =" as the shortcut. I'm guessing there's no way around this--just have to put extra spaces in my code.
2) After I create the AutoText shortcut, being hyper-careful that there are no spaces or returns in the text selected to create the short cut or even after the text to be shortcutted, OO.o Writer insists on inserting a return when I invoke the AutoText shortcut. (This doesn't happen with other AutoText shortcuts.)
In Open Office Writer, How do I create headers/footers different for certain pages. For example: From page 20-60, I need to write a text "Hello Header" in the header and "Hello Footer". And from page 61-100, The header should read as "Good bye header" and footer to read as "Good bye footer"? Is this possible? Or is there any software available to make this happen?
View 3 Replies View RelatedHP DJ1520
CUPS
print options set to color in both OS printer-options dialogue and CUPS browser dialogue. printer successfully prints color test page from CUPS browser dialogue. openoffice Writer print-preview shows document in color. openoffice Writer printer-dialogue options set to color.
Cannot paste URL When I middle-paste into the URL box in the Hyperlink toolbar, nothing happens. Misleading support link The support link in Help/Support shows the general Novell support page. It is not clear how to get support for OpenOffice from there (especially for openSuSE). Hyperlink toolbar button performs no action In order to place a hyperlink at the cursor, you have to click the pull-down menu by the hyperlink button on the toolbar. Clicking on the button has no effect.
I think it should be equivalent to inserting the hyperlink as text. Persistent extending hyperlink mode When you place the insertion point immediately following a hyperlink and start typing, the hyperlink text extends; there is no way to cancel that effect. In particular, in the situation when a new document contains only a hyperlink, everything you type, either in front or at the end, becomes a part of it. The only way out of this situtation is to clear the hyperlink text and press Enter; the hyperlink is then replaced with an explicit URL and you can type further without extending the hyperlink.
No apply on Close There is another undocumented button in the Standard Toolbar that opens the Hyperlink dialog box. This box behaves in a very peculiar way: when you click on the button [Close], the box closes without updating anything. In order to apply the changes you have to press [Apply] and only then [Close]. This is rather surprising (at least for me), although it is better understandable when you consider that the Hyperlink dialog box is modeless. Travelling paste Steps to reproduce:
1. Edit a long document (containing several pages).
2. Mark some text on Page 1.
3. Middle-paste the text on Page 3.
Observe how you get transferred back to Page 1.
My document contains a parenthetical remark, like this:
(This is a long parenthetical remark.)
OpenOffice Writer advises me that the dot should rather be placed after the parenthesis:
(This is a long parenthetical remark).
I think OpenOffice Writer is wrong.
I have a problem with regards to opening the open office. every time I open a document, I cannot view it. It says the application cannot be started. The user interface language cannot be determined. What's the possible cause on this? How will i correct this error?
View 12 Replies View RelatedI have noticed that when I create a table in openoffice writer and I create a formula in a cell in order to add all the numbers in a column (ex. <A>+<B>+...) they work fine but then when I save and quit the document and open it up again the formulas dont work anymore and I have to retype them. how can I prevent this from happening?
View 3 Replies View RelatedI'm using Mint9, and making labels with openoffice writer. I find myself going through a bunch of keystrokes every little while that I'd like to convert to a macro or two to simplify my work. "alt-vzpo" and then "alt-vzwo" to change the view first to "page width" and then to "whole page".
Id like to have a macro or hotkey or shortcut to toggle those two, or two separate ones to accomplish each.
What I'm thinking is to build them into environmental variables to be established when I start openoffice writer (With a command line) and then to remove those environmental variables when I exit. I used to do similar things in DOS, but it's been a long time and this isn't DOS.
Is there a better way? Or if that would be the best way, how do I go about writing a script that will do that? Or would it even work?
Basically we have these reports to write up. They're usually almost identical in structure, but they're not allowed to look like copy-pasta with names changed - there is supposed to be some variation in wording.
So, what I want to do is create like a set of different versions of each sentence, for example "I welcomed the customer", "I greeted the customer", "I said hello to the client", that kind of thing. Then be able to have the sentences chosen at random. Do this for each of several sentences in the document.
In OpenOffice Writer, dragging on a Ruler item does not snap to a grid.E.g. I want to drag the "Indentation handle" by 1.00cm exactly. But it does not snap to a grid. So when I drag it, I got maybe 1.03cm or 0.98cm.How do I set it so the Ruler conform to a coarse grid of say 0.5cm? Then, I am assured when dragging, it will only land on 0.5cm, 1.0cm, 1.5cm, and so on. And it would not be land on 0.79cm, 1.07cm, 1.43cm, etc.
View 5 Replies View RelatedI am using cairo-dock, I want to add openoffice writer to the dock. Where do I find the icon for this? What is the equivalent of windows 'program files' in openSUSE. I'm thinking if I can find its directory, I can find its icon.
View 1 Replies View RelatedFC13/KDE. when typing text in writer, when I hit the tab key it places a solid line across the page.
Is this a setting in openoffice?
This is rather queer, as I know what I'm looking for, but I'm not sure what it is called, or whether it exists in Writer.
I'm writing a report, and I would like to have the content (index) page configured "automatically", so that it lists my headings in the rest of the document, but if I add something in the middle of what has already been written then it should pick that up and change the content page accordingly, without messing up the page numbers.
It's quite a pain to make a content page by hand. I think MS Word has a tool to allow you to do this, but I don't want to use MS Word in this case for various reasons. So does anyone know what this is called and perhaps how it is done on Writer. Although, if I know what it's called, I can use the Help.
I need to know the header file used at 'c' to support openoffice writter at REDHAT4. I plan to write a c++ program for something like spellbee game. so instead of giving a txtfile which has a list of words as a source for the game I decided to use some header file. My assumptions are: Since the redhat4 is written through the "C" language and as well as the openoffice writter which is a supporting package at this os too might have the linker right. At openoffice writter we have the spellcheck feature which might had a source from where it checks the words whenever we type something at openoffice writer. So is it possible to use those header file or linkage source at my c++ spellbee game program instead off creating the list about few bunch of words.
View 1 Replies View RelatedI use openoffice writer 2.3.9 and when I paste a picture on a document, I can't find any option to get the portrait format. With a right mouse click I get a all lot of options (especially under "picture") but nothing about the format.
View 9 Replies View RelatedIf this is the right forum i don't know, but I'm having a problem which crashes my home server when writing to Samba. Googling and a quick search in this forum didn't help me any further. Is there anyone with a clue what to do?When I write several hundreds MB to my Samba share from a Windows machine the machine crashes (both with Win XP and Win 7). The problem is reproducible, although the precise moment (about 1 minute) or amount transfered data varies (about 300 to 800 MB). Small writes go well.Reading about 5 GB from Samba to Windows went without a hitch.
Hardware:
- Foxconn r10-s3 (includes Atom N330) with 2 GB RAM
Software:
[code]....
Trying into install fedora. I am setting up my system as a dual boot over two drives. I have set up a custom layout and whenever I get to the step to write changes to disc it crashes with an unhandled exception. I have tried multiple times now, it always crashes.
Here is the first line from the exception report:
anaconda 15:31 exception report
Traceback (most recent call first):
File "/usr/lib/python2.7/site-packagees/pyanaconda/storage/devicelibs/swap.py", raise SwapError("swapon failed for '%s'" % device)