Ubuntu :: No Sound In New Koala Installation / Get That?
Mar 30, 2010
I have read everything I can get my hands on, and there seem to be many people without sound. However, I can't seem to find anything from the suggestions that will work.
I have read numerous posts about this subject, but being a novis in the Linux field, I cannot say that without explicit step by step instructions I am able to repair or tinker with anything under Ubuntu. In short, my sound has ceased to function. It did work for a period of time and suddenly no more. I have a 64 bit version of Ubuntu 9.1.
I am running 64-bit (version 9.10) on a VMWare workstation. I am having an issue with my sound card. This is the message that I get when I start the VM:A device ID has been used that is out of range for your system. Sound will be disconnected I am running Vista-64 as my host OS. I know it might be easy to blame this on Windows, but I also have an XP guest OS and sound works fine there, so it is definitely an Ubuntu related issue.
I have recently moved to 9:10 and I found some problems with the sound card Intel. Reading some posts I managed to partially solve the problem and now I hear the music perfectly but only from the headphones: but I need to "unflug" external amplifier in gnome-alsa-mixer each time I reboot otherwise I not even feel the headphones
Last Monday I upgraded the Ubuntu from Karmic Koala to Lucid Lynx in my laptop (HP Compaq volna 515), and I have no sound. Searching in linux forums for an answers, I've got that (as far as I understand) there's no unique solution for this problem.
This is my lspci code...
Also, I tried to clean up the pulse audio .. What is funny for me is that pulse audio and alsa, and the audio players seems to work normally (no error of device not found or something like that).. except that there's no sound out from the speakers.
Any suggestion to discover if the problem is drivers, kernel, packages, or hardware failure? more important, how do I get the sound back?
I recently installed Karmic Koala server edition, and then did the 'apt-get ..install' for the desktop gnome, but now I'm not sure what to do to get my gui to show. I am stuck at the termanal type command line, it's asking for a sudo comman. I know a few 'sudo' commands, but I really need the gui.
Upgraded my laptop from 2Gb to 4Gb RAM and ubuntu doesn't detect it. I've read all the posts on this issue and I have:
1) installed a PAE kernel and made it the boot option. Output from uname -a is: Linux tensor 2.6.31-17-generic-pae #54-Ubuntu SMP Thu Dec 10 17:23:29 UTC 2009 i686 GNU/Linux
2) removed all the non PAE kernels (a post I found mentioned this if the PAE kernel doesn't sort it out after a reboot)
3) tried to install the linux server image & headers but this didn't work. I later found articles discussing how you couldn't do this under Koala anyway.
I tried to upgrade through Ubuntu Jaunty .04 to Koala but couldn't, I think it had something to do with the Kubuntu I have dowloaded also, (like it goes to the same splash screen and I choose if I want to go to Ubuntu or Kubuntu) the kubuntu is on the 8. version. how do I fix this so I can upgrade to Koala?
I want to install Ubuntu to HDD via USB drive but I can't see my HDD. Only the USB drive is there. I don't have any CD left to burn the ISO, so USB drive is my only choice.
I am having problem in grub2 fails to boot the system. I get the error:
Booting from local disk... GRUB loading. error: no such disk System setup:
It's a Dell XPS400 PC with 160 GB HDD. I have a non-LVM, primary partition for the boot file system (/boot) of 200 MB. I also have seven logical volumes (LVM partitions): six for each of the /(root), swap, /home, /usr, /var and /tmp, and one vbox_win_xp_base as a raw disk for running Win XP in the Virtualbox. I went on to configure all these without rebooting the system in between. Later I also updated to the kernel version 2.6.31._20. Next day I decided to reboot my system. But then the bootloader (GRUB2 in my case) won't able to boot it and gives the error mentioned above.
Made an account specially for this. I have a server hosted with iWeb and obviously cant just stick the CD in and fresh install. Im looking to upgrade the entire server to 9.10 all through SSH or within 8.04's GUI all the while not having to reboot until its ready to run and configured otherwise im left with an inactive server...
i install ubuntu carmic koala, after that, my internet connection was not support with ubuntu karmic koala,,i'm using compaq cq40-337 tu.. how to setting the internet connection?
I've installed Karmimc Koala server edition, and I wanted the gui so I followed advice on a forum and did an apt get install gnome desktop etc. but don't know what to do next, all I see is a command line, no gui. I would even settle for just having web min so I could control my server from that, as I have read that servers are more vulnerable with a gui.....and my last ubuntu server got hacked, so I had to wipe out the hard drive and start all over.
I just upgraded from Jaunty to Karmic, but once I loaded Karmic and rebooted, my computer will not complete the boot up sequence and go into any desktop. It starts the initial boot sequence with the mouse appearing and then goes to the screen that looks like it has an atom cloud. After that, the screen goes black and the mouse-arrow turns into that white rotating wheel, but it stays that way. It never actually goes into any type of operation! I tried to go from the command line and find Lucid to overlay it on Karmic and hopefully solve the problem. It just looks like to me that several of the packages I downloaded through my upgrade manager were corrupted. My computer doesn't even seem to be acknowledging my password because it gives me an error 32:must be authenticated.
I bought a magazine "Ubuntu User" that comes with the 9.10 DVD (32- & 64-bit) to avoid heavy download.
1. What is the biggest benefit of the DVD versus the CD ? Having more software on the disc right ? But how can I install additional SW without downloading ? 2. I want to install a Home Server from the DVD but I don't know how to select the server edition to install ? Do I still need to download the CD image for the server edition ? I want to be able to select one or more of the automatic server installation scripts e.g. LAMP.
i have 2 hard drives on my machine (1 with ubuntu & 1 with win xp) & would like to create a boot menu to select either at startup, but this isn't working. here is the order of how i setup my system:
1. installed win xp on drive1 2. disconnected drive 1 & installed ubuntu 9.10 on drive2 3. set ubuntu as master drive & win xp as slave drive
i've read about modifying menu.lst to get a boot menu, but as far as i can tell this is no longer valid in 9.10. i've also installed startup manager, which gives me a boot menu *but* when i select the win xp option at the boot menu, i get an error. i'm assuming this error is due to the fact that i am using 2 hard drives (instead of the more common 2 partition on 1 hard drive). Here is what my boot option says: Microsoft Windows XP Professional (on /dev/sdb1) Here is what commands run when I select this option:
drivemap -s (hd0) ${root} chainloader +1 Here is the error that results: ERROR: INVALID SIGNATURE
is it possible to get a boot menu with 2 hard drives using 9.10? it's worth mentioning that i am a brand new user to linux. p.s. the reason i didn't go for a partition on 1 hard drive from the start is that the ubuntu partitioner did not recognize any free space on my win xp drive.
In the last few weeks I upgraded my Ubuntu from 8.04 to 8.10 to 9.04. No problems, everything went well. But yesterday I tried to upgrade from 9.04 to 9.10. Everything seemed to go OK until the upgrade was finished and I had to reboot. After the reboot, no Ubuntu anymore... I get GRUB, but when I continue to boot the latest kernel, I don't see any harddisk activity anymore after about 2 seconds.
Here on the forums I read that one should run the boot_info_script when having boot problems, so I already did. I booted the system with a 8.04 live USB stick. And here is the result of the boot_info_script:
Lately I have noted a decrease on the performance of my Ubuntu Karmic Koala 64 bits installation. It takes longer times to open applications and documents and sometimes the windows fade to grey and I have to wait. Can anyone give me some hint on where to start looking for a solution?
I currently use Karmic Koala (9.10) and want to upgrade to Maverick Meerkat (10.10). The thing is that Update Manager allows me to upgrade only to 10.04 (Lucid Lynx) but I cannot upgrade to Lucid Lynx because of a bug which freezes my keyboard and mouse. Also, upgrading first to 10.04 and then to 10.10 is quite time consuming. Can I upgrade directly to 10.10 from 9.10 without 10.04 acting as a mediator?
I've been trying to get Grub 2 to work on a desktop system I'm trying to install Karmic Koala on. It's currently got two similar hard drives, which I've partitioned into a small /boot partition and the rest as a large general partition. Both are fd (linux software RAID) types. I boot from the Ubuntu live CD then create the RAID arrays as RAID 1 (requires installing mdadm to work). Then I start the arrays and begin the install.
I select manual partitioning and create the first RAID array (/dev/md0) as an ext4 /boot. The second array (/dev/md1) requires a new partition table. I then partition it as 20G for /, 2G for swap and the rest as /home, giving me /dev/md1p1, /dev/md1p2 and /dev/md1p3. When the install finishes, I mount the various partitions in /mnt (for /dev/md1p1) and below, including binding /dev and /proc. Then I chroot and install mdadm in the new system. I update grub, re-install it on /dev/sda & /dev/sdb then update the initramfs.
A quick reboot and things go wrong... Grub boots me into a recovery console. Apparently it can't see the partitions in the second RAID array. how to get Grub 2 and/or mdadm to work in this situation? I know that apart from the RAID, the above process worked to allow me to set up a Grub 2 boot on an antique laptop with an incomplete install.
I had been happily on Jaunty Jackalope until they stopped supporting it so I took the forced upgrade and it's HORRIBLE!
I feel like I'm back in Windows land. Within an hour of my first load I had my very first Ubuntu total-lockup. Just like Windows. In the 18 months I'd been using Jackalope I had not had a single crash. Not one.
It's slow, jerky, and has odd freezes. Just like Windows. Applications randomly stop working and die. Just like Windows.
Is there any way to fall back to Jackalope or is there any hope of them fixing Koala? 'Cause this is wretched.
I see there's another version out there...10.04.01.LTS. I'll try that. It can't be much worse.
I'm making a school project and need a ubuntu command line edition with low used space.Now I was able to download and install the Ubuntu 9.10 "Karmic Koala" Minimal CD.But the size is now total 626mb and packages installed around 300mb.I figured that the archived deb files were not deleted when installed.
Recently installed Ubuntu 9.1 following an easy how to. The install session went really well, smooth and only had one little speed bump when deciding which drive to install to (running raid and did not want to loose other partition). Like most speed bumps I got passed it. Ran all the updates then decided to start listening to music with Rythmbox Music Player. The sound coming out of my Klipsch Pro Media 4.1 was muffled and sounded like just the subwoofer was on. I checked all connections and they were fine. I tried looking for equalizer but did not find it and then noticed the sound was like a skipping record. So I looked it up and came across some posts that I could not figure out if they were for my problem. Seemed to me they were just leading me in circles.
Preliminary checks of sound level settings and obvious dumb stuff but there is still no sound. The problem seems to be that the system does not recognize the existence of the sound card and insists on using alternative audio devices.
Installed Fedora 11 successfully, but I cannot get the MP3 files to produce sound.
Have tried the default configuration for sound, the Pulseaudio and the PulseAudioSoundServer.Installed and use KDE interface. Sound works for SKYPE (after selecting HDAIntel) and the Firefox 3.5 Beta 4.
Before Fedora 14 i have Fedora 12 and all was ok with sound. Starting with root account surprize i have sound. But after playing a song in xmms, sound is dead. I have tested sound in Windows and is ok.
I am looking for the easiest way to get my workstation running with the needed services. At this time, these include SSHD and Music Player Daemon.
I ve installed both and they work when activated manually by sudo /etc/init.d/ssh start, or mpd respectively. But I don t have a clue as to how to start them up with an Upstart job?
Can a 32 bit karmic koala 9.10 support 4gb of ram. i donut want to get 64 bit because of the compatibility problems. so i am wandering can a 32 bit ubuntu run 4gb ram with it?