Ubuntu Networking :: Best Driver For Wifi Adpater
Dec 7, 2010
My wifi adpater (built into HP laptop) is a intel wifi link 1000 series (b/g/n I think). Looking at some other resources it seems iwlwifi driver is the recommended driver for this card? however it is currently using iwlang. I am constantly experiencing dropped connections with my belkin g router and I am wondering if changing the wireless adapter driver might help, even if it doesn't what is the best driver for this card?
View 1 Replies
ADVERTISEMENT
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
May 13, 2010
I just installed ubuntu and I have no wifi connection. How would I download and intsall a copy from my Win XP boot?
View 2 Replies
View Related
Sep 25, 2010
I have just installed Ubuntu on an old laptop for a little bit of programming and to gain some familiarity with linux. Im looking forward to getting to know my way around the OS
Unfortunately, the wireless card (for wifi) on this laptop is broken, so instead I have been using a wifi usb dongle on windows. I am having some trouble installing this dongle in ubuntu, i cant find a driver for it!
Its a "MicroNext MN-WD546J 54M Wireless Adapter"
[url]
I have my modem connected directly at the moment via LAN, and this works no problem, but id like to get it connected wirelessly
View 1 Replies
View Related
Jan 23, 2011
I'm running Maverick Meerkat Ubuntu and I'm trying to figure out how to disable this bcm43xx wifi driver, or something like that. Personally, I have no clue what this is, but someone said that after you install NDISwrapper and its components, you have to disable bcm43xx driver, otherwise the two will conflict.
View 6 Replies
View Related
Jun 26, 2011
I have just installed Fedora 15 on my desktop machine. It has found my WiFi card and has installed a driver but it is an incorrect driver. How do I remove it and install the correct one? The driver that is installed is a RaLInk RT 2800pci but the one it needs is a RaLink RT2860. This is the driver that I used with the same WiFi card in Fedora 14 using Ndiswrapper. Do I need ndiswrapper this time too?
Clicking on "Connection Information" says that the connection is active and that the driver is rt2800pci but I cannot connect to anything
View 4 Replies
View Related
Jan 5, 2010
Here's the situation: I've got an eee pc 901 running Ubuntu 9.10 netbook remix. I'm using it to connect to a WPA-encrypted wireless network on a WRT54GL running dd-wrt. It mostly connects and works ok, but sometimes it just stops working for no apparent reason (the netbook still shows itself as connected), but you can't get anywhere until you manually disconnect and reconnect. Other times, it will drop the connection, and then quickly reconnect (or sometimes not). Obviously, this behavior is pretty irritating. At first I thought the problem was with the router, but I checked the logs there and they all seem fine, and other computers on the same router don't have this problem. Looking at "dmesg | tail" on my netbook, I see a lot of instances of the following error, which I'm thinking is probably the problem:
Code:
[11137.762233] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[11142.872797] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 440
[11152.883274] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 556
[11152.883529] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[11163.952056] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
I searched for that error message and I found this Ubuntu bug report: [URL] that describes symptoms that match mine. In that report, a poster mentions that he compiled and installed a new version of the wireless driver from the Ralink website, and it fixed his problem. Do you think installing a new driver would be good? Or has that updated driver already been added to the kernel since that bug report was filed? I've never compiled a kernel module before.
One other thing, I also see repeated instances of these lines (or similar ones) in dmesg, which look like they could be related.
Code:
[44096.275923] RX DESC f30ca000 size = 2048
[44096.276885] <-- RTMPAllocTxRxRingMemory, Status=0
[44096.281404] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[44096.281424] 1. Phy Mode = 0
[44096.281435] 2. Phy Mode = 0
[44096.309841] 3. Phy Mode = 0
[44096.314533] MCS Set = 00 00 00 00 00
[44096.316196] <==== RTMPInitialize, Status=0
[44096.316280] 0x1300 = 000a4260
[44096.401269] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44096.472502] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 116
[44096.472977] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44106.768056] ra0: no IPv6 routers present
View 1 Replies
View Related
Mar 9, 2011
I have an emachines D620 laptop running Ubuntu 10.10 with a Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01). I havent done anything with it and cant seem to get it to work. I know this because when I had visto on it the card worked, but know it says that its firmware is not enabled and ive tried installing the drivers using the Additional Drivers under Administration. I would like it to be working so I can use my laptop's internet.
View 5 Replies
View Related
May 22, 2011
where can I download the proper driver for my wifi module : Ralink RT3090 ?
Ubuntu 10.04 propose the rt3090sta which is no good
View 9 Replies
View Related
May 27, 2011
i am trying to install device driver for my usb wireless adapter "Edimax" . i have figured it out that it recognized by device but when i submit command lshw it doesnt show configuration driver for wireless usb. i have drivers for it in the vendor cd as "driver for linux" but i dont know how to install it
View 1 Replies
View Related
Jan 29, 2010
i want to ask about install driver, i'm confuse how detect my driver wicth one use driver on my laptop....(WIFI Driver)My condition, i dont have conection LAN (local Area Network) Just Wifi, because that i cant download automatic detect on update driver, please help me how actived my wifi on offline mode,on my windows seven my hardware wifi, is Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC.
View 4 Replies
View Related
Feb 13, 2011
When I select the wifi icon on the panel, it just shows "No network devices available". I know my network can be found when I search with my iPhone, so I know there are networks to connect to. So, I checked the drivers, and it informs me that the B43 and STA drivers are not activated. So thats not a big deal, I guess, but when I use my ethernet cord, my laptop doesn't recognize/acknowledge (I'm not sure what the right term would be)it. I'm fairly sure I can't activate these drivers without an internet connection because when I do try, a message pops up saying "failed to fetch" with some long link.
My only guess is that it could be a hardware problem, but I really have no idea. I guess the ethernet problem is my only real problem. Because after I establish and internet connection the the rest is easy to fix.I'm sure its obvious, but I'll go ahead say that I'm a novice ubuntu user. I've only been working with it for about a week, but I'm learning alot.
View 9 Replies
View Related
Mar 3, 2011
I have a HP Pavilion dv6-2155dx Entertainment Notebook with Broadcom Wireless Lan Driver.
I didn't want to bother anyone with this, but I just could't find a solution. I was happy using Ubuntu 10.04 LTS Desktop Edition, because the wifi was working fine, but I messed everything up dealing with networking in terminal.
So formated and now I have Ubuntu 10.10 Netbook Edition, but that didn't solved my problem at all, because my wifi driver still unfunctional.
Before anything, I tried commands like "dbus restart" and "network restart".
So after reading that I can install by getting ndisgtk and the .inf file, I downloaded the right driver from HP Support's page of my notebook. Extracted the package with Wine (got some error because I wasn't running Win7, of course, but that doesn't matter.).
I did this: [url]
And this is my final result:[url]
Technical informations:
Quote:
View 1 Replies
View Related
Jun 1, 2011
I love it on my Dell D610 with wifi. I've installed Ubuntu 11.04 and land on the wifi problem as explain here: [URL]
but the wifi BCM4311 seem not working for me. In the hardware/additional drivers, i've the message that the proprearty driver is working and in use. But i cannot scan the network and no way to connect to my d-link via WPA-PSK (TKIP+AES)...
View 9 Replies
View Related
Mar 14, 2011
As a part of my final project,i am beginner and this is the first one that i have the opportunity to work under linux fedora,my task consist to develop with C a driver of wifi by using the SDIO Wifi card as an interface. This driver will be included in a digital receiver TV.
View 2 Replies
View Related
Dec 1, 2010
I have been trying to get my WiFi(AR9285) card to work properly for quite some time now. I need to know how I can completely remove the wireless driver that comes pre-installed with ubuntu.I have done the following:- Installed the "compat-wireless-2.6.33.tar.bz2" drivers, which have ath9k.(This had no effect. I rebooted and it still gives me the exact same problem)-Reinstalling ubuntu -Disabling IPV6-Ensured that I am close enough to the wireless router. It's not an out-of-range/low-signal problem.What I need to know:-How do I completely remove the current driver that comes pre-installed, in order to make sure it is replaced by the new one?
-I have read about "Backports" many times, but I am not sure what I should do. It would be great to get any instructions or links about this.-As a last resort, I think I'm going to have to use ndiswrapper. Again, before I do this, I need to know how to completely remove the current ubuntu driver, to make sure it doesn't fight with the one I will install. I'm going to find the needed .sys and .inf files now, as I have completely ran out of ideas
View 1 Replies
View Related
Dec 29, 2010
I am dual booting with windows xp on a dell computer I recently acquired. I am running Ubuntu 10.10. The computer didn't have a wireless connection so I installed a wireless pci adapter from a company called ZONET. I installed it perfectly on windows xp, however, I cannot install the driver and the "Ralink Wireless LAN" on Ubuntu. I inserted the cd, and opened the setup.exe file with Wine Windows Program Loader (I have installed Wine 1.3 by following the instructions on http://www.winehq.org/download/deb and clicking on the link that says "click here".
I am currently temporarily connected to the internet by borrowing my main computers ethernet cable). I followed the instructions on the InstallShield Wizard only to have two windows pop up saying there is an error (see attached image).
View 9 Replies
View Related
Jul 3, 2010
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
Mar 6, 2010
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
View 9 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
Sep 1, 2011
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
View 2 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Apr 8, 2010
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies
View Related
May 13, 2009
the only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
View 4 Replies
View Related
Aug 23, 2009
I have an old PowerBook G4 that I would like to use as a 'dummy' computer for learning wireless penetration (WEP/WPA attacks) more effectively. I had been using a wireless router, but I gave it away I can use Mac OS X to share an ethernet connection over wifi, but this is _very_ un-configurable. You get two options only, WEP and a key-length. So, I would like to install someway to make this wireless connection more configurable.
View 2 Replies
View Related
Jan 24, 2011
I just bought a Lenovo B560, everything working except the Broadcom 4727 wireless (only in terminal it works)
View 4 Replies
View Related
Jun 30, 2011
i have recently installed ubuntu 11.4 on a macbook pro, i did this because mac osX would not work at all, even after takign it to the apple store they could not fix it. so i decided to help my friend installing ubuntu. everything works other then the wifi driver. broadcom sta wireless driver it says that is test by ubuntu devolpers but when i try to activate it i get an error that says: installation of this driver failed.
View 1 Replies
View Related
Jan 15, 2016
I just installed Debian 8 and it doesnt look like my WiFi card is working. Unfortunately I didn't make a note what is the card manufacturer. How would I update WiFi driver?I previously had Windows 7 but I installed Debian over Windows.
View 2 Replies
View Related
Aug 29, 2010
In my laptop on Linux(Ubuntu) platform the Wifi driver is not working so.. What should I do ?
View 2 Replies
View Related
