I use wireless service of my school, and I got a problem use proxy to connect to Internet for a whole system. I setup proxy for Firefox like this, and Firefox works! And this for my system. I already click "Apply System Wide". It's not work. Apt-get, Pidgin, GoogleEarths not working. My school's proxy also provide a username and password for everybody.
View 2 RepliesIs it possible to set a proxy server for every user without manually configuring firefox for each individual user?
View 1 Replies View RelatedPlease, how do i set up the global proxy in Kubuntu 10.10
i need to use internet and install software packages. But when i run sudo apt-get update it can't connect
Ive installed fc11 on my laptop (IBM lenovo R400). My work has a proxy which we must go through. I have set the proxy addresses in System Settings->Network Settings-> proxy. I have also run export [URL].. All seems to be ok, yum works from the command line, konquer goes out to the net just fine. However firefox wont connect to the internet no matter. The only way at the moment is to manually set the proxy in firefox.This doesnt seem right? Surely FF should pick up the system proxy? Does anyone have any ideas about this one?
View 3 Replies View Relatedi setup yum to use my proxy (/etc/yum.conf , /etc/profile.d / KDE network setting)and it works great.
but rpm does not.(the command rpm) how do i setup rpm to use the same proxy yum is setup with ??
My ISP seems to be having some configuration problems cos of which I cant download certain files (mostly exe and msi and some rpm files) as the download either doesnt start (firefox download window showing "Starting..." all the time) or download gets stuck at some point of time.
However I have access to my college computer through SSH using public key authentication and my college computer has internet access 24x7. I would like to be helped with 2 things:
How do I use the internet through my college computer? Like when I use the internet, the requests go through my college computer so it must appear that the requests come from my college computer IP while I use firefox from my home computer How do I configure yum to download packages through my college computer? I want to setup yum to use the IP of my college computer to download the packages.
I have set up squid3 and dhcp server on my Ubuntu 10.04 box with IP address of 192.168.0.160. Single network card.Squid runs on port 3148. Everything works fine for the users provided that I set up the proxy details manually on each client pc.I want to set up the Squid to run as a transparent proxy and after reading around I have done the following.In the Squid3 conf file I have entered http_port 3148 transparent.Dropping to Root ( sudo -i )However the transparent proxy does not work and if I enter iptables -L I can see that the rule above has not been retained. The default rules in iptables only show up.
View 5 Replies View RelatedI can bypass our firewall in IE. They use wildcards, like 10*. I've tried 10.100.0/16, but am still getting to our firewall. How can I specify the correct settings for Firefox?
View 4 Replies View Relatedwithout proxy's like Ultrasurf and Freegate you can't browse them; So when i was running on Microsoft Windows, i was using Ulrasurf or Freegate to browse these web pages; but in Ubuntu i can't run .exe programs.. How to find a good proxy program to browse these web pages or if some plug-in is exist in Firefox to browse these pages, How to download it and teach me how to use it.
View 2 Replies View RelatedI've been trying to make myself anonymous, but I cant find 'Tor' anywhere, tried 'yum & kpackagekit' neither have it. I did find 'Privoxy', installed it, set proxy for HTTP and HTTPS in Firefox, but it says 'unknown proxy' when I try to use it! I've been to the Privoxy web site and read through the 'User manual', but most of it is 'geek' to me!
View 8 Replies View RelatedI want to settup a proxy server who just redirect the internet connection to my second computer. I try Squid Proxy but its too complicated for me. Can you sugest me another more simple program to do what i want?
View 1 Replies View Relatedinstalled dansguardian and now working fine.I got a small problem. People bypassing proxy settings in firefox, means they go to settings and changes proxy settings to no proxy.. how to prevent this? How can I force people to use proxy to connect Internet? I done some googling but, unable to find a solution.
View 3 Replies View Relatedhow do i get yum, KPackageManager to use System Proxy Settings for there network access ? by proxy i mean it's a program that uses my phone as the proxy.here is the command adb forward tcp:8080 tcp:8080
now i got it to work for firefox like this localhost 8080 for all protocols.did the same in KDE proxy settings localhost 8080 for all protocols..just need to know hot to configure yum and kPackageManage
to use it as well?
I am useing bshellz and i want to know how do i setup ssh tunneling in firefox when i am surfing the web.I newbie when it come to ssh tunneling.
View 3 Replies View RelatedThe problem is that he did not specify exactly where in /etc/profile. I am trying to make a custom spin of F12 but I cannot do it behind the proxy as it is now.
View 4 Replies View RelatedI just got a new desktop (the client) and hooked my "old" computer (the server) up to it with a crossover cable & NFS while I set up the new system.Unfortunately, while nfsd is running firefox cannot access the internet through ath0 -- the wifi card (NFS/rpc is on the ethernet card). Do I have to set up a proxy server (eg. squid) or is there a simpler solution?I don't need direct access to the net on the client. I just want to be able to use the wifi's IP in the server while it has a NFS client on eth0, so that firefox can work online.
View 2 Replies View RelatedCurrently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
I've got LAMP up and working and I'm currently hosting a joomla install on the server. I was wondering if there's an easy way to get a web proxy working on my site. I'd like to be able to use it just like you would at hidemyass.com. By simply supplying a url it'll provide the proxy services for me. I've looked through joomla's extensions library and don't see any extensions that'd provide that functionality. I was hoping that there'd just be some prepackaged web proxy application I could install.
Anyone out there know of any simple way of getting this up and running. I've looked at Squid but that looks like it's primarily a proxy server intended for internal network users. I didn't see any sort of web proxy feature to install on a web server there.
I am trying to setup the most efficient way to remotely administer an ubuntu system. So far I was successful in setting up ssh. I have the server running and made sure it only uses keys to authenticate and changed the default port. I can connect to the ssh-server. This system is behind nat and bots trying to break-in when I forwarded the port. I used the AllowUsers option, which helped in knocking back these rouge connections. I was not comfortable leaving a port open all the time, so I set up logmein Hamachi VPN and closed the ports that were open on NAT.
Now I use Hamachi and am very impressed. I use VNC in VPN. But Vino is slow, I tested x11vnc and it was slightly faster. I also tried to set up freenx but nxsetup file was missing. some one posted that file in the forums and suggested copying to the system but I was not sure if I want to download a script from the forum and use it. So for the time being, I thought I will just concentrate on X11vnc until freenx is fixed.
I would like to create a separate desktop on the server and use it to access remotely. This way we will not have to fight over the cursor (sounds funny but very frustrating). From what I understand x11vnc has this function inbuilt (uses vncserver). I cannot get it to work! when using ssh, at the remote machine's command prompt, if I type "evince xyz.pdf", it does not launch the "xyz.pdf". what am I doing wrong? When using VNC, how can I change between different users on the remote machines? Right now I can only use VNC in one account that I first setup. When I try to change to another user, vnc client goes blank. How can I get as much control of the remote system as possible? Right now I need someone to switch on the remote system and login to their account before I can VNC. Can I use ekiga inside VPN, I use skype right now and it's sometimes terrible with dropouts. I looked around and someone suggested using ekiga as it works very well over lan. How do set up ekiga so that I have a direct connection with the remote system? Is there any client that just takes the IP address and creates a connection? Mumble seems to be the popular choice, it's most suited to LANparties, I just need a connection between two systems. I am trying to set this up to help users with hardly any computer knowledge to use the system without any issues.
I have a dynamic IP and cant get a static IP. I have bought a VPS in the US with a fixed IP. I wanted to setup a Proxy so that I can access my clients servers from one IP only as they restrict outside access from all IPs.
How should I setup this proxy so that I can simply put in the IP and port of the VPS in my browsers proxy settings and it accesses the clients servers as its IP will be allowed by the client ? Is this a Apache Proxy I need to setup ?
At the moment I have a proxy and all the users have to configure it in the browser to access internet. I want to make the users able to browse even without configuring the proxy in the browser. but eventually it should be received in the proxy rather than giving an error to the user. I heard with transparent proxy I can redirect all the traffic from a particular network, to a particular host( ie my existing proxy).
I tried this using firewall rules. But then the existing proxy doesn't understand the protocol of the requests. I heard that it should be in the kind of proxy protocol.
I have a simple issue that I think can be solved with several different methods. I basically want to create a personal server solution that allows me to do two things:
1.) I want to be able to remotely backup data to my server.
2.) I want to be able to pass traffic through it and use it as a proxy.
I am off to college next year and I want to leave a computer/server back home to do the two things stated above. I was thinking of using an Asus Eee Box PC like this:url
I want a low power reliable machine that will only be used as a remote solution. I won't be hooking up a monitor to it (that is, after I set it up).
It will be on 24/7 for easy access.
I will be accessing this server from a Windows 7 based machine.
I do not mind at all installing Linux on my server, but I am not an experienced coder so I will need software with a GUI that can help me set this all up.
I need to setup a squid 3 proxy with https bumping. Unfortunately I'm not very familiar with squid and https in general.
I already perfomed the following steps:
1.) compile from source
Code: Select all./configure --with-openssl --enable-ssl-crtd
make
make install
2.) configuration (http)
I used this guide: [URL]
3.) configuration (https)
[URL]
The server is now working for http and https, but is the server secure, too? Is the default config already secure or do I need to configure additional security features? (e.g. things like cert validation, cert pinning, [dont know what's importend], ...)
I have a server in the US, and I want to setup a VPN so I can run my home computer through it.
I'm using CENTOS4
I'm currently using a proxy, however I had to restrict it by IP, hard to manage when using mobile devices.
I'm trying to set up firefox system-wide to handle ed2k links properly, I'm following amule wiki howto at this page http://wiki.amule.org/index.php/Ed2k_links_handling but it seems a little outdated, I tried to create /usr/share/firefox/greprefs/all.js and /usr/local/share/firefox/greprefs/all.js but I got no results. I also tried to edit /usr/lib/xulrunner-1.9.2.17/greprefs/all.js with no luck. So where should I put ed2k handling strings to apply them system-wide ?
View 1 Replies View RelatedI'm new to linux, but enjoy using it very much, especially without a GUI, console is fun! I need to set up port forwarding. We have 3 servers, 1x running Ubuntu server 8.04 (used as transparent proxy), 1x server 2003, 1x windows xp.
The linux box has the following ips:
eth0 (internal) 192.168.1.5
eth1 (external) 192.168.0.7
Windows server 2003:
192.168.1.6
Windows XP:
192.168.1.9
Router:
192.168.0.1
The router automatically forwards specific ports to 196.168.0.7 (Linux eth0). From there I want to forward port 8585 to 192.168.1.6 and 3000 to 192.168.1.9. Is there a way that I can do this using iptables?
The commands that I think I'm gonna use look like this:
iptables -A FORWARD -s 192.168.0.0/24 -p tcp --dport 8585 -d 192.168.1.6 -j ACCEPT
iptables -A FORWARD -s 192.168.0.0/24 -p tcp --dport 3000 -d 192.168.1.9 -j ACCEPT
Would this be a correct way of doing it? My biggest problem is that I can't test it without going live, and if I go live and something doesn't work, the entire building will be left without internet, people will hate me. Also, The proxy captures all data on port 80 and forwards it to 3128 so that the proxy can monitor the usage, and a few systems runs fine with it, others however can ping websites, and internet explorer says "website found, waiting for reply" but the webpages cannot be displayed.
I currently have my server setup with a web page and ssh. I am looking to find a way to access the internet from my work computer, but all proxies that I can find have been blacklisted...I can however access my home server webpage. Is it possible to create my own proxy so I can surf from my work laptop?
View 2 Replies View RelatedComputer A has two network interfaces. One is on a 255.255.255.240(eth0) subnet and has an IP of 192.168.1.6 and the other is on 255.255.255.0(eth1) subnet and has an IP of 192.168.1.64.
eth1 can communicate with modem(192.168.1.254), which also acts as a gateway to the Internet.
eth0 can communicate with my internal LAN, which consists of several computers including Computer B. This subnet 255.255.255.240 has it's own gateway to the internet at 192.168.1.1. However gateways will not apply to this scenario. I just added them to help paint a picture of my network.
What I am trying to do is tunnel http from a web server running on the modem(192.168.1.254) across to Computer B within my internal LAN and be able to view the http content via a browser. Sure I can just open a browser on Computer A, but I'm running Computer A headless. I can also curl it from a command line, but I'd like to learn how to tunnel across a subnet. If I get this to work, would I be able to interact with the site(i.e. make modem configuration changes)? or would it just be one way? How do I tunnel data from the eth1 subnet over to the eth0 subnet and over to Computer B on my internal LAN?
What I tried was the following:
I setup a proxymini to run on Computer A and have it listening on the eth0 interface on port 8080 by using this command 'proxymini -l 192.168.1.6 -p 8080'.
Then on computer B, I setup httptunnel -a 80 -p 192.168.1.254:80 -d 192.168.1.64:8080.
Then I should be able to view the site through a browser on port 80 on the computer I run httptunnel? This setup isn't working.
I have an interesting situation. I'd like to use bittorrent for legitimate purposes (mainly linux distro based) but the powers that be have blocked access to bittorrent at my university. I have an ubuntu VPS that I use for odds and ends and was thinking that I could setup a SOCKS5 server on it. That way, I can input the SOCKS5 info directly into the proxy section of my local bittorrent application (Transmission 1.92 running on snow leopard) and be good to go. The problem, however, is that I cannot find a way to get a SOCKS server up and running on my VPS. I've heard that ssh can be used as a simple SOCKS server, but I've also heard that i may need to install a more complete SOCKS server such as dante. Does anyone have any thoughts on this?
View 1 Replies View Relatedi was tasked to setup a proxy server to block access to some websites. i'm using centOS 5 and Squid 7:2.6 STABLE21-6.e15...i appended the following and tested the configuration with the supposed server i am using and the it does seem to work but now i'm wondering how i can test it with a client computer..i have 2 LAN cards and i just connected the other to one PC (can a direct connection work or does it need to pass thru a switch or hub)...i just can't figure out how it should be... how do i configure the 2nd LAN card to use this computer as its proxy server?
View 8 Replies View Related