I have 6 Ubuntu 10.10 machines in a network sharing documents. Every time I open a document from a different machine than the origin of the document, I must open a copy of the document to edit it. Is it a way to avoid that?
View 9 RepliesI have two Ubuntu Lucid Lynx computers, and I want to share files between them. Whenever I need some file, it's in the another computer. So what I want? I want that my PC's synchronize the files together: When I create a new bookmark (in Chrome) on computer X, it will appear in the computer Y's browser. I also have Documents-folder on both computers. When I put something in that folder I want it to be shown on the other computer's Documents-folder.
Is this possible with Ubuntu One?
Am currently building a new PC and will be using both ubuntu 10.04 and win7. I have 2x 320GB drives and 1x 1TB drive. I plan to use a drive each for the OSs (win7 + nix) and the 1tb for my home partition. My home partition will store my music, videos, docs, Virtual Machines (note file sizes are sometimes bigger than 4GB!). What file system should i use? FAT32 will not work because of the large file size of the virtual machines.
View 4 Replies View Related"Life has been made easier with all Microsoft systems, all versions of Dos and Windows, because each of them has to be installed in an active primary partition and so hence will always has a boot loader in the root partition." So if I already have Windows 7 installed (in a 100gig partition of a 1t hdd) how do I modify the windows booting process so that I can go on to create many additional partitions that will be used for linux distros?
View 7 Replies View RelatedIm using WPA with a TKIP pre-shared key...Can a client pc im sharing my key with access my files if im not file sharing? Router config?
View 2 Replies View RelatedI can access my windows my documentsmusic by mounting my windows drive and browsing to it. I can then playwatch my movies and pics in Ubuntu.But what I really want to be able to do is re-map the Ubunbu docs folder like so:
Ubuntu Pics = Windows My Documents pics.
Ubuntu Videos = Windows My Documents Videos.
I'm not very unix savy so I've been using Ubuntu tweak PersonalDefault Folder Locations setting and browsing to my Windows folders. But it doesn't work.I have managed to make a desktop 'short cut' and that works but I'd rather set the system wide default document folders.
How can I change the mountpoint of my partition /media/documents to /documents.This is a partition of sdb and a fixed disk.The reason is that /media/ sometimes creates ghostdirectories while /Windows/C never does so, programmes writing/reading from this partition therfore don't work if a ghostdir_ exists.(BTW Suse is on sdb5 and sdb6. on sda is windows and used to be Ubuntu, the Suse-swap is sda5. Windows is out of use.)
View 4 Replies View RelatedWhen he saved doucuments in the opens source word processor as a MS Word document, he can't open it. Didn't had this problem until today.
View 2 Replies View Relatedhow i am so new with xubuntu i want to know how to set it up. im so new in xubuntu.
View 4 Replies View Relatedhow to send a document to print on a network printer (via IP address) from the command line (not a GUI interface).
View 4 Replies View Relatedi'm looking for any documents or video tutorial for How to Start VPN SERVER on Cent os 5, i'm going to make VPN accounts and set monthly bandwidth on each ,on my Server and let to client's to connect to server via VPN Connetion, such as [URL]...
View 1 Replies View RelatedI want to connect a laptop running ubuntu 10.04 to a laptop running windows 7 via direct connection in order to transfer files like music, documents, pictures, etc. I have an ethernet cable that I thought I would need in order to do it. Is that even possible?? If so, how would I go about doing that?
Now, I have tried to share the files wirelessly but for some reason when I pick up the workgroup on the ubuntu laptop and enter the password in order to connect to the windows laptop it says my password is wrong, when I know for a fact that it is not. I know I can transfer files with a flash drive and what not but I want to try to get this working.
I have an old laptop that I installed EasyPeasy Lucid on. I have never used Grub2 as my other Ubuntu installs still use Grub Legacy. I have studied all the tutorials which instruct that the grub.cfg file should not be edited directly.This old laptop has one of the dreaded Intel graphics chips for which the kernel automatically loads the i915 module. Of course (like a multitude of others with Intel graphics and Lucid) I booted into a black screen but knew the workaround was to enable mode setting through grubI used the
Code:
i915.modeset=1
and added it to /etc/default/grub line GRUB_CMDLINE_LINUX, just after "quite splash", just
[code]....
Have searched for this and am sure the answer is out there somewhere, but I can't find it. My wired network is configured as AUTO, and is DHCP, I can add a new static config, but can't get it to load, as the original AUTO always loads on a reboot. I need to be able to run sudo Network manager so I can reconfigure the default..
View 9 Replies View RelatedI have a gaming server set up and running client software 24/7. This prevents me from editing the configuration files while the client is running. The server is connected to a switch which also connects another computer to the internet.What would be the proper software to use if I want to edit files on the server without interrupting the client?I have looked at Samba, SSH, and Screen, but I'm not entirely sure which one would be the best tool for the job.
View 6 Replies View RelatedI have a new install of Karmic (not an upgrade) on my home network. All the other machines are XP sp2 or sp3. I have the following line in /etc/fstab:
Code:
//desktop/ddrive /home/dram/aDesktop-D cifs credentials=/etc/credentials.dt,nobrl,uid=1001,gid=1001 0 0
[code]....
Recently I had installed Ubuntu 10.04 in which I had connected to the internet by way of terminal (pppoeconf) and I could access any site with ease.But one fine day suddenly I could not access the net, I try to locate the notification icon (network manager),but could not find it.I did this and that,googled it trying to find the solution but alas to my disappointment I had to format it.
After reinstallation of Ubuntu I connect the internet by way of editing connection on panel and i could access the net. The problem is that I could not access some site especially org site e.g Home - Desiring God so can anybody guide me in how to connect in most better way.
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
I've been looking around for something that can help me share files with my notebook with lucid and my desktop with windows xp...i could only find help in setting up ubuntu... i dont know how to connect to XP, setup xp for file sharing with ubuntu and share my files.
View 2 Replies View RelatedIve got my laptop hindered up to my xbox 360 it has windows 7 and Ubuntu 10.04. i realy want to get rid of windows and the only reason i keep it around is because ics sharing works realy well for connecting to xbox live.
I recently discovered that you can (ics) with ubuntu which is awesome only problem is
i cant figure out how to set it up to stop it having moderate NAT so i can play games that require an open NAT. its probably due to the ports not being fowarded properly or somthing and/or the face that my xbox needs a static ip placed out side the routers firewall on the DMZ setting .
I have a MediaGate MG35 which allows me to play movies and things via my network from my computer. This worked fine with Vista, but when I upgraded to Windows 7 the samba sharing changed and my MediaGate was no longer able to gain access to my shares on 7. My solution was using VirtualBox with Ubuntu. This worked fine on 9.10. I did this by creating a folder in my /media folder called windows-share, giving it a share called movies with Guest access. and then adding the following line in the rc.local file to mount the windows share though VirtualBox:
mount -t vboxsf movies /media/windows-share/
(movies being the name I gave the shared folder in VirtualBox) So I had to do was start the VirtualBox and everything was setup without me having to do anything. This then allowed me to get to my movies saved in windows with my MediaGate. This worked great. I've now got Ubuntu 10.04 on a new VirtualBox. I've set up everything the same, but when I try to access the shared folder, it doesn't work. If I try to access it with windows, it says that the share is not accessible or I don't have access. This ONLY happens to the folder that has been mounted to, any other folder I share works fine.
I have little question, how can i share internet in Ubuntu? In this case to Win 7? I have tried Firestarter, but that doesnt work... And please I do not have a router I just need simple connection from my desktop to my laptop, and I dont want another box collecting dust.
View 1 Replies View Relatedi would like to set up file sharing from one ubuntu pc to another wireless laptop.I found samba on the internet i installed it and i can share files but it's slow a 700mb avi file was going to take 2 hours and from what i read samba is for sharing files from linux to windows.I also found ssh that to is slow also i think it goes over the internet or something like that.So is there any other way to share files that's faster or have i forgot something.I only have 2 ubuntu 10.04 computers and 1 open solaris but the open solaris i will not be putting on the network.
View 9 Replies View RelatedI have done the ICS in my ubuntu 10.10 according to this article using eth0 connecting to wan router and eth1 connecting to the lan switch. Everything works fine.I have an open vpn connection which have full tunneling through the server. I want the vpn connection to be shared on the lan, and every internet connection will go through the vpn server. If I change the eth0 to tunnel adapter in iptables forwarding rule, will it work?
View 2 Replies View RelatedI have a laptop running Windows XP with a secure wireless internet connection. I want to share this connection to my desktop running Ubuntu 9.10 via an direct ethernet cable connection. So far in Windows I checked the "Allow other network users to connect through this computer's Internet connection" in the Wireless Network Connection Properties menu. Doing this creates a new IP Configuration. Here is an output of running the ipconfig command: Windows IP Configuration
Code:
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . : home
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
[code]...
I am using Ubuntu 9.10 and trying to use Internet Connection Sharing through my Dell Mini 9 laptop.
The incoming internet is from wireless The outgoing internet is from Ethernet I am using a crossover cable as I have heard this is necessary I followed the 9.10 method on my Auto Eth 0 connection Here is a link to the Ubuntu Documentation I used The computer I am trying to share to does not pick up the internet being shared from the cable.
I'm running xubuntu on two identical machines and both need to have file sharing working. the first installed no problem and works perfectly but the second machine will not work.
On the second machine i installed it with the install button when you click of shared folders. after it installed i rebooted and it asked me to install again. I tried to install again but it just kept coming up with the install windows afterwards. I tried purging samba and reinstalling and it did not work as well.
Im kind of lost on what to do now?
How can I share files between two laptops, both running Ubuntu 9.04, home wifi network situation?
There seem to be lots of Samba type programs etc, but I just want to know the simplest most straight forward way.
What needs to be in installed on each machine etc..
I have an Ethernet hub, and want two computers (both notebooks) to share my internet connection. One is running Ubuntu 9.10 and the other is running Windows Vista. I want both computers to be able to connect to the internet (I use a cable modem).
However, when I plug both computers in, I am able to get only one of them working at one time. When Ubuntu works with the internet, Windows does not work (although it sees the internet connection). When Windows works, Ubuntu sees the connection, but cannot connect.
I just installed 9.10 and I tried to share specific folders by right clicking and selecting share. Not a problem.
However when I goto a Windows machine I see the share but cannot connect, says incorrect login/ password. I used the same login/ pass for the linux box and I created a new user and I still get the same results. What am I doing wrong?
I want to use the GUI for this please. When I edit the smb.conf I don't see the share.