I installed PyLotRO and copied all the files from the Turbine folder on my Windows HDD.I ran the game perfectly fine, it loaded everything as it should; however, when I log-in, the loading screens run then give me a "Connection failure: You do not have the current client version".I've been unable to find any other problems like this on the site.
View 2 RepliesI'm looking for a method for modifying some jpg photo files last modification date with the corresponding timestamp creation date of each file.The reason is that shotwell import pictures in folders according to last modification date which is stupid on my opinion.
View 2 Replies View Relatedwe have a minor issue with time synchronization in proprietary equipment.the client needs to synchronize time with server, but not using NTP.it is not very important so doesn't need to be done often.the problem is that it won't synchronize. I can see the server is sending tcp packet with date&time, but the client ignores it.I suspect the problem is in format (manual specifies there are two possible options like MM: DD: YYYY and so on, but server seems to use some other)Is there an easy way to run some program in Linux Debian, to send that simple packet with correct date?
View 4 Replies View RelatedI just switched from a basic digital camera to a more advanced one that stores both Jpeg and Raw (.Nef - it's a Nikon) files for me.When importing files in Digikam, I rename the files so that they start with Date and Time. Example: 20110121-223748.JPG for a photo taken on Jan 21st 2011 at 22:37:48.I was a bit surprised when importing both the JPEG and the Raw version of the same photo, that the filename is different by a few seconds (no constant offset, sometimes they are the same):
20110121-223748.JPG
20110121-223750.NEF
I did some "research" by looking at the exif data of both files (using "exiftool 20110121-223748.JPG" from the command line). Here is what I got back
(amongst other data):20110121-223748.JPG
File Modification Date/Time : 2011:01:21 22:37:48+01:00
Modify Date : 2011:01:21 22:37:48
Date/Time Original : 2011:01:21 22:37:48
[code]....
So it seems that Digikam is using the "File Modification Date/Time" (different in the Jpeg's and Raw's of my camera) rather than the "Create Date" (the same for both Jpeg and Raw). (The few seconds difference in "File Modification Date/Time" between the two versions of the same photo is probably due to the time that my camera needs to write away the data on the SD memory card. I guess.) Is there a way to have Digikam use the Create Date? (Or the Date/Time Original?)
PS: I'm on Ubuntu 10.04LTS, using DigiKam 1.2.0
After installation of 'Karmic' F-Spot only briefly loads then goes off. I have uninstalled and reinstalled twice but without any change.
View 3 Replies View Relatedit loads slow and if i start more than like 20 songs at once it locks up and spit out an error wtf??
Ubuntu 10.04 (lucid)
GNOME 2.30.0
Kernal 2.6.32-22-generic
CPU vendor AuthenticAMD
CPU's 2
Model name AMD Turion(tm) 64 X2 Mobile Technology TL-60
[Code]...
I have an odd issue -- fairly fresh Debian Testing install, using Lightdm.
After booting up, Lightdm starts, and then a moment or two later restarts. As a result, any keystrokes captured by the first run (e.g. the first few characters of my username) are lost. My lightdm log is:
Code: Select all[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.16.7, UID=0 PID=827
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/01_debian.conf
[+0.00s] DEBUG: [SeatDefaults] is now called [Seat:*], please update this configuration
[Code] ....
This log shows me seeing the login screen, waiting for it to restart, and then logging in correctly on the first attempt.
As a photographer I'm constantly taking photos and storing them in folders. Now occasionally I'm using two cameras (either for different settings or an assistant is also taking photos) which means that for one event I can have differently named images.Both cameras have the same time set (which always helps in Windows) but in Ubuntu when trying to sort my folder by date taken I can't.The options I'm given are to sort them: Manually, by Name, by Size, by Type, by Modification date and by Emblem.Now none of those are helpful to me once I've done a few edits to the images.So please if anyone knows, how do you organise a folder with images taken on different cameras by Date Taken rather than Date Edited?
View 3 Replies View RelatedI have recently been trying to hack around a MTP plugin for the Exaile music player, but the first hurdle was getting any basic MTP operations to succeed. The following python calls caused a segmentation fault:
Code:
>>> import pymtp
>>> dev = pymtp.MTP()
>>> dev.connect()
>>> tracks = dev.get_tracklisting()
Segmentation fault
I had a look at pymtp 0.0.4.1-1 and I think that it is not in sync with the libmtp8 package (version 1.0.2) I have installed on my xubuntu 10.04 system. I have looked at the libmtp.h file for 1.0.2 and made some changes to pymtp which appear to do the job - no more crash, but I haven't yet tested the other parts of the interface. Feel free to use the attached patched file. I will try to get it to the package owner for further testing and hopefully an eventual package update.
I am using CRON to create a new, blank file, every minute, in a specific location on my web server. After web searching, and reading man pages, I get the impression that the following command is supposed to work:touch /home/mydomain/var/folder/attachments/`date +%H%M`.txtThis should give me a new file with a file name that is the current hour and minute.However, when executed, the CRON mailer reports:touch /home/mydomain/var/folder/attachments/`date +/bin/sh: -c: line 0: unexpected EOF while looking for matching /bin/sh: -c: line 1: syntax error: unexpected end of fileSo, it looks like shell is seeing the plus (+) sign as an EOFObviously, nothing get created.What would be the easiest, single line command to create an empty file, at a given location, with a time based file name
View 5 Replies View RelatedI'm trying to change the time stamps on a bunch of pictures in the same directory, because several cameras were used, some of them with the wrong time zone.exiftool seems to be the correct package to use, but it doesn't seem to work.
The following command seems to be the recommended way to subtract 1 hour from all .JPG files in the directory, but the exif data in the file and even the time stamps don't change.
Code:
exiftool -a -AllDates -=01:00 .
When I go in a file with pictures and right click on it I tell it to arrange pictures by modification date but when I start viewing the pictures and click on next then it shows them to me in Alphabetical order.I am using Eye of GNOME 2.32.0 to view picturesHow do I get this application to show me the pictures by modification date
View 4 Replies View RelatedAnyone have a ksh solution to convert julian date to gregorian date?
View 6 Replies View RelatedI have been a casual Debian Wheezy user for quite some time now. And one of the things that alarms me is that how does Iceweasel keep itself up to date on the latest secuirty patches ? I also use Windows on my desktop and it is dual booted with Linux. In Windows I use Nightly build of FireFox. They update themselves almost everyday. Normal Firefox also seems to update pretty often. But Iceweasel only updates if I do an aptitude full-upgrade
And that is also once a month. So how is Iceweasel expected to be secure if there is such a long delay in the patches ? Iceweasel also does'nt have a "Check for updates" options like Firefox.
Won't we be better off using the normal Firefox on Debian distributions ? IMO that gives faster patches for security issues.
Also does Iceweasel use Flash Player or gnash ? Because running dpkg gives me the following output-:
Code: Select allsreyan@debian:/usr/share/dict$ dpkg -s gnash
dpkg-query: package 'gnash' is not installed and no information is available
Use dpkg --info (= dpkg-deb --info) to examine archive files,
and dpkg --contents (= dpkg-deb --contents) to list their contents.
Flash Player also has individual updates in Windows which is maybe once every 2 weeks. I also don't see that in Debian. Flash players need to be kept up to date since they are responsible for most security breaches.
I had started a thread some time ago where a user commented that Iceweasel was out of date and needed to be replaced by Firefox. [URL] .....
So why is the Debian community still sticking to Iceweasel ? Why not switch to Firefox like Ubuntu ?
I can not work with pulse. I have removed it but have failed to install ALSA in its place because the instructions I have are out of date. Could someone point me to alsa installation instructions that work with 10.10.
View 4 Replies View RelatedI have some photos that were taken with the wrong date set in the camera
View 1 Replies View RelatedI'm having an US American date format that drives me totally nuts, like MM/DD/YY. Today is 1/13/15. It seems to appear across the system (GNOME 3), from Skype to IceDove to Nautilus. So my hope is there is a central instance where I can change this. I would prefer to have 13-Jan-15 or 13-Jan-2015 or at the very least 13/01/2015, i.e. in some order consistent with my European brain.
View 7 Replies View RelatedIn the Windows world where I came from, Irfanview freeware easily renamed a large folder of JPEG photos by EXIF time & date stamps, appending a unique number if the time and date stamps were the same. Is there an equivalent rename-by-EXIF information batch command in Ubuntu 10.04 Lucid? For example, change (based solely on EXIF information): FROM:DSC_0001.JPG TO:20110224_09:34:56am.JPG
View 9 Replies View RelatedI'm wondering if anyone distributes mplayer, mencoder, and ffmpeg, up-to-date builds of each and their associated dependencies (x264, faac, xvid, etc).I had to compile all that stuff myself and fought with it, and finally got it working.
If no one distributes latest builds, then I was thinking of going further with what I've done to help others: virtualbox lenny and automated compiles of all packages and putting up the builds, with latest revisions of mplayer and ffmpeg from their source code repos. Using LD_LIBRARY_PATH to isolate the build so any modern linux can run the produced binaries, with only glibc as a dependency.
I'm on Debian Wheezy using Shotwell 0.12.3. I have a bunch of .MOV videos that I want to import to Shotwell. I choose import from folder and select copy pictures. The import proceeds and shotwell tells med the .MOV (and some .jpg:s) are imported. The pictures are imported with no problem and placed in an event 2014-10-19 as expected. But videos are placed in an event dated 2004-01-01 and not in 2014-10-19 where they belong. Obviously, Shotwell does not use the files last edit date. I though maybe there was some bad dates in the metadata and opened the files in both Totem and VLC player but concluded there is no such metadata available (as far as I can tell).So how does Shotwell determine the date for .MOV files? Where does 2004-01-01 come from? Seems random.
Then, I tried dragging all movies in Shotwell to the event where it really belongs. That is, where the recently imported photos got placed 2014-10-19. But instead of the videos beeing moved into that correct event, now all photos appears in the 2004-01-01 event.Undo that last step and close Shotwell. Then, instead I manually (in nautilus) copy the .mov files to the 2014-10-19 folder where the picures resides. Open Shotwell again which detects something happened and starts import the videos again. Unfortunatley they still show up in the 2004-01-01 event
Another wierd thing is if I manually (in nautilus) move the Shotwell 2004-01-01 folder away from the Pictures folder (out of reach for Shotwell). Then when I re-open Shotwell the event does not appear anymore - as expected. But If I try to once again import the videos, Shotwell tells me all videos are duplicates and does not import them!?! In other words, manually removing a folder from Shotwell mess up the database. And that database is obviously not used to populate the events tree in the gui.How do I get my video to appear in the correct event? Alternatively; is there a photo/video library in Debian that actually works?
I'me currently try to configure MPD and I have a doubt.MPD clients (sonata et co) are only used to control MDP ?They don't play the music ?
View 1 Replies View RelatedI would like to stream music from my iTunes on my MacBook to my Linux PC using AirPlay (formerly AirTunes). Is there a client that makes this possible?
View 3 Replies View RelatedI would really like to preserve a file's original modified date and pass it back to the file as the same attribute after a script has worked on it. I get a lot of JPEG files from different places on the Net which I either turn around and upload or burn to disk, and having the "original" date of either download or last mod in a graphics app would be for me, in the long run, a lot more helpful when deciding, for instance, which files to "recycle" or pass on backing up more than once.I've tried doing this on my own every now and then. Where I run into problems is that it appears "stat" and "date" use different formats for date information, and I can't seem to puzzle out how to "translate" one to the other satisfactorily for the latter command.
Just to give an example:
stat foo.jpg |grep Modify gives me
Modify: 2010-07-12 06:28:56.890625000 -0400
Passing that string as-is to date foo.jpg, I get the errordate: unknown option -- 0 and the usual semi-courteous suggestion to Try 'date --help' for more information.Somehow my TexInfo database got screwed up somewhere along the line and info dategives me the short article on date input formats, not the full documentation for the command
Does anyone know of a VNC client that can access a mac (OS X 10.6)? When I try Vinagre, I get the message:
Authentication method to host <ip address> is unsupported. (30)
I have Ubuntu installed, using transmission client to download a torrent.The torrent is coming down at ~300kbps, but my internet connection speedtests @ 50mbps...how do I configure connection to utilize connection?
View 4 Replies View RelatedThis is more of a question for developers of rhythmbox DAAP support. I am using rhythmbox to remotely access music exported by mt-daapd server. It works fine. But it does not seem to close connections properly. This problem is very severe when you press "prev" button a few times. How to reproduce (this just one way):
1) Start playing a few songs (playlist or an album).
2) press "next" button a few times
3) then press "prev" a few times.
The playback might even pause for many seconds if you are not a LAN. Now check connections opened by Rhythmbox.. (netstat -n | grep 3689 on client). You will notice a lot of connections, and they stay for a very long time.. multiple hours. Let me know if anyone needs more info.
Tried to install aMSN using Sid package... can't do it because no TK8.5. Installed TK8.5 and aMSN, now I get another strange message ...
Error in startup script:
OK ...
Let's check out 'Empathy IM Client' , no longer any support for MSN because ...?
Tried to setup Mercury which needs Java. Go to run Mercury, no java!
Had to set up Pidgin so that I could go on msn!
I have installed squeeze with KDE. I have xterm bugs, this last kill alone with command apt-get, the xterm is killed! There are another xterm client that I install under KDE?
>> apt-get install another xterm ........
I use a P2P application (KMLDonkey), whose client (mlnet) can be either started automatically, at startup, or manually, after login. At installation, when prompted, I chose the former so as to minimise the number of clicks. However, with time I found it inconvenient because, of course, it would start downloading even though I haven't started its GUI yet or don't plan to use it at all.
What I would like is to click on 1 entry in the menu and have the client and, in sequence, the GUI start when I decide to use the application. Perhaps this would require a short script in /usr/local/bin? I've tried to write one, but failed miserably, as I'm not good at it. I use KDE, but the application or the desktop manager themselves are not important here, for the solution would apply to any application with a separate client/GUI.
I've never really found an FTP client that I really like, but until recently I've been using gftp. Now I'd like to switch from ftp to sftp, and when I try this in gftp (using the host ftps://ftp.website.com) it just says this:FTPS Support unavailable since SSL support was not compiled in. Aborting connection.
View 3 Replies View Related