I have installed lucid some months ago and everything worked fine, but since about 10 days I have no more sound at all (vlc/amarok/you tube)... I have looked in the past threads, installed and unsinstalled pulseaudio, checked that I am not mute in alsamixer, but it still doesn't work. Here are the outputs of some commands:
[Code]..
On kubuntu 9.10 my sound was working fine. less than a week ago i upgraded to kubuntu 10.04.After the upgrade the sound did not work at all. i made sure that my volume was turned up and that my volume was not on mute. so far i have gotten no sound on 10.04
View 4 Replies View RelatedI installed Kubuntu 10.04 and found out that there is no sound for flash in firefox. Also I here no sound when playing local video files (VLC, KMPlayer).
I checked kMix and everything is on. I tried to install pulseaudio, but I am not sure about it. Last time I saw it couldnt connect to some server or what... Although I can hear system sound and Amarok 2 plays mp3. I didnt mention that I tried to install libflashplugin and kubuntu restricted extras.
I am having a problem getting sound to work in flash-videos in Kubuntu 10.10. My system currently has two working sound cards, the one integrated into my motherboard and the other is a USB Logitech headset. After installation, the speakers were set as my default output device which I did not want. I was able to move all the sounds over to the USB headset using phonon. While Amarok works, videos work (downloaded, wmv, avi, divx, etc) I cannot get flash video to work in Firefox. I set up my prefered device as the USB headset for everything in Phonon, but still the sound will only come out of my integrated soundcard (speakers). I'm not sure what exactly I am missing, I set everything up, but still it's a no go. What switch did I miss? I haven't used Kubuntu for a while, but i'm pretty sure this worked fine in Ubuntu 9.04 (when I last used it).
View 4 Replies View RelatedI am having difficulty changing my default sound card in Kubuntu 11.04. I am able to use Phonon to change it for KDE applications; however, I am unable to accomplish this for VLC and Chromium.
View 2 Replies View RelatedI have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
Have a couple of very annoying problems. I recently did a re-install of Kubuntu Maverick on my HTPC/fileserver box.It has an onboard (Realtek?) audio card, recognized as... I think, ALC888... Yeah, not sure, KInfoCenter lists a bunch:ALSA Sequencer DeviceUSB 2881 Device ALSA Control Device (my DVB-T stick)ALSA Timer Device
HDA Intel ALSA hardware specific Device
ALC888 Analog ALSA Capture Device
ALC888 Analog ALSA Capture Device
[code]....
I'm a bit concerned about this. I've installed Kubuntu 10.10 tonight, and had tried it a week ago briefly without updates. Both times I've had this really loud sound which I'm guessing is the fan going a bit mad. Is this related to a newer kernel or something? Is it dealt with easily? This is a Toshiba Equium laptop from 2 1/2 years ago. I've got the Powersave setting on now in the hope this might stop it happening while I'm trying to read up on this and get advice.
After all the observed Linux progress since I've been using it I'd be quite annoyed if something botched in the OS kills my laptop. The computer got quite hot, even though its feet are rested on a wooden board that normally prevents this.
I just install Kubuntu 9.10 everything is work find but my logeitech usb speaker.
It says its on defualt and it not muted. I can also see the volume go up and down when I press the buttons on my speakers.
This is what I get when I:
Recently installed Kubuntu karmic koala (9.10) and I have no sound other then the startup sound.
[Specs]
O/S: Kubuntu 9.10 Karmic Koala
Mobo: Asus M3A78-EM
I installed kubuntu over ubuntu (both 9.10) this morning. in the past have had problems with suspending my laptop on ubuntu, so i tried on my new kubuntu. it entered suspension, but when i came back, all i saw was the login screen and the mouse. But nothing worked. It was just frozen. So i did a forced shutdown (held the power button down till it cut off). When i started it up again, there was no audio, no startup jingle. I restarted about 3 times.Here is the output of lspci:
Code:
blakefebruary7@ubuntu:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
[code]....
I am using Kubuntu 10.04 When I play any media file, I am not able to hear any sound. A few weeks ago, except DragonPlayer and Amarok no other app on my system was able to play sound(vlc etc.). A few days ago, even they stopped working and I saw a message related to Phonon and HDA Intel card of my system that it is not working properly. I also have dual boot with winXP and it sound play very well on it. Searching the net, I have tried these:
[Code]...
I think my question os quite silly, but yet, I can't figure out how to fix it. I had Debian Lenny installed on my laptop. While in Debian, i could control the volume of laptop speakers and headphone in separate channels. So, i could, for example, play a music in laptop speakers and in headphone, at same time.
In April, I've migrate to Kubuntu 10.04. I cannot do it any longer! There are no two separate channels in KMix. Everytime I plug headphone, it redirect the audio output from speakers to heaphone, and when i take the headphone out, it puts taudio output back to speakers. How can I control volume of each channel manually in Kubuntu 10.04?
I just recently installed linux kubuntu 9.10 and for some reason it says sound card not installed. When I know its installed. When I boot it (I have dual boot) as windows it works just fine. My sound card is HDA ATI LSI Si3054
View 4 Replies View Relatedno speaker sound after upgrade to kubuntu 10,04ltc.toshiba laptop a200 1la
View 6 Replies View RelatedI am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedHaving an issue with A2DP in Maverick.
Whenever I connect my headset, both 'Headset Service' and 'Audio Sink' are shown as being connected. I'm only getting mono audio.
I tried clicking disconnect on 'Headset Service' but it disconnect both. Selecting connect on 'Audio Sink' also connect 'both' and gives mono output.
I am a linux beginner and need your cooperation,
Operating system:
Kubuntu 10.10
Kernel 2.6.35-22 Generic
My laptop is HP probook 4520s
[Code].....
I tried that webcam on another laptop same version of ubuntu and same kernel (mini HP laptop), webcam worked out of box in all softwares with all supported resolutions.
Using Kubuntu Maverick. It's probably all my fault but I cannot get CD's to play.
Amarok: for the life of me, I cannot understand how to get CDs to play. In Lucid Lynx CD playing was unusable because it would crash by the second or third song; now, I cannot even get the program to start playing my CD.
KsCD: worked in Lucid Lynx, crashes in Maverick.
KPlayer: it does play the CD, but it does so jerkily, that is, it stops every 10-15 seconds. Unusable.
Kubuntu is not a crappy OS that cannot even play a CD.
I have two OS in my system. Windows& and Kubuntu. Both are in separate hard disks. I was using both. In between i have upgraded my system. now when i am giving priority to hard disk containing kubuntu, i can login to kubuntu, but cant get in to windows7. i have upgraded grub but not working. when i am giving priority to hard disk containig windows7 it enters and work properly. but not working in the previous.
View 1 Replies View Related