Ubuntu Multimedia :: How To Convert MKV To Svcd
May 12, 2010i, what program do i use t convert MKV video files to svcd or any othe format that can be used to burn dvds that are comatible with dvd players
View 1 Repliesi, what program do i use t convert MKV video files to svcd or any othe format that can be used to burn dvds that are comatible with dvd players
View 1 RepliesI am trying to use 'convert' in command prompt to convert image file format.I get the following error.
convert: UnableToOpenConfigureFile `delegates.xml' @ configure.c/GetConfigureOptions/589.
convert: NoDecodeDelegateForThisImageFormat `airplane.jpg' @ constitute.c/ReadImage/530.
convert: MissingAnImageFilename `airplane.ppm' @ convert.c/ConvertImageCommand/2838.
I have tried to convert movie files like I used to on Windows with AnyVideoConverter... I installed WINFF, but it doesnt seem to work with anything. When trying to convert a .mov file, it does something on the terminal and it gives this: Unknow encoder -libxvid- ... and then nothing.
View 5 Replies View RelatedI am sitting on over a hundred Disney and other kid's VHS tapes we still have around from when our kids were little. My granddaughter has found them and finds them fantastically entertaining but VHS isn't exactly hardy for a 4 year old to handle. I'm looking to convert them to DVD for both backup and space savings. Cinderella has already bit the dust and I'm paying dearly for it. I have done some research and every bit of information assumes that I would have an idea of what I'm doing.
I do own a DVR but most of them won't copy for copy protect reasons. As far as I can tell the only way I can convert them is by going from analog VHS to digital DVD. Now, I have no clue how to do this nor what hardware I would need if any to do this.
I'm trying to make a copy of my Blu-Ray movies on DVD-R so I can play them on my DVD player. The movies have been ripped to my HDD and the HD audio extracted. So I'm left with one video stream and one audio stream (either DTS or AC3) in a single m2ts file. I've tried to use mencoder with the same command that I use to convert DVB HD broadcasts to DVD compliant mpeg files as so:
Code:
mencoder -oac copy -ovc lavc -of mpeg -mpegopts format=dvd:tsaf -vf scale=720:576,harddup -lavcopts vcodec=mpeg2video:vrc_buf_size=1835:vrc_maxrate=9800:vbitrate=4500:keyint=15:vstrict=0:aspect=16/9 -ofps 25 -o newfile.mpg 00520.m2ts
[Code]...
Is there something wrong with my mencoder command, or is there perhaps a better way of attacking this. I've spent a fair bit of time looking for a solution to this and there seems to very little information around. I would have thought this would be quite a common thing to try and do?
I need to convert a few avi files ( around 20 )to the mp4 format and need to know how to do this in Ubuntu.would prefer if it would be a Gui based.my ubuntu version is 9.10.
View 7 Replies View RelatedThere is an oldish thread for building sox to include mp3:
[URL]
I want to convert ogg to mp3.
I folowed the steps carefully.
In the rules file I remove:
--without-lame
from
DEB_CONFIGURE_EXTRA_FLAGS
leaving
--with-distro="Debian GNU/Linux" --with-dyn-default --without-amrwb --without-amrnb
I always get something like:
FAIL formats: can't open output file `/tmp/t.mp3': SoX was compiled without MP3 encoding support
mp3 not working.
Anyone know how to do this, or know of a different way of converting ogg to mp3?
Ubuntu 10.4
I have several files (DVDs, flv, mpeg, mp4...) that I'd like to watch on my Android phone (HTC Tattoo) that supports H264 and my other phone that supports 3GP.
INstalled Handbrake - does not have a 3GP option; mp4 will play audio but not video on Tattoo.
Installed Transmageddon - complains that cannot find the plugin although I click OK on download
Installed WinFF - complains no encoder.
I'm missing something from my packages but what? And where to get it?
I have a video on DVD disk. It is split into 4 parts with file extension VOB. The total time is ~90 mins. In the fourth part I need just the 4:53 first minutes.
I would like to append the 3 parts and the 4:53 first minutes of the fourth part together without lessening the quality and to convert them into AVI.
How can I do it?
I'm trying to convert a screencast of RecordMyDesktop, from .ogv to .avi. I want to upload this video to ....., but the problem that i found is: When the convertion with mencoder is finished; the video resultant is longer that the original, the original video has 13:01 min and the converted video have 39:00, in wich only up to the minute 13:01 is reproducible. And when I use Arista Transcoder, and convert the video to mp4 for example. The video resultant is normal, but when it's uploaded to , in the sound is ruined.
View 9 Replies View RelatedIs there a way to convert oga files to mp3 or maybe wma so that my mp3 player will play them without my having to log in to Windows to rip cds and transfer the files to Linux? I'm running Intrepid.
View 9 Replies View RelatedI am trying to convert some .asf files to .avi and do not ask me which kind of avi because I could only answer "the kind which would play on my DVD player". It takes avi but it does not say what kind. Doing it through vlc would be favorite because ffmepg looks really complicated. But I'll have a go with ffmepg (or whatever) if I'm advised to do it.
View 1 Replies View RelatedI have quite a few HD WMV files on my hard drive and it's a pain in the *** to play these on Ubuntu, since it eats up a lot of CPU. I use vdpau with SMplayer, so MKV's work well, that is why I would like to convert these WMVs to MKV, without losing quality.
Is this possible with software for ubuntu?
How to do it on Ubuntu? which one is the suitable software for accomplishing that task?
View 1 Replies View RelatedI would like to convert an ogv file to an avi file so i can upload it to ...... I have been having trouble though. When you used the command below and the file was converted all the display was distorted, I could not see the video as it was in ogv. Is there some known issue here with converting ogv? ffmpeg -i file.ogv copy /home/user/Desktop/file.avi
I'm tyring to convert the 3gp format that my droid likes to avi format which is more recognizable (like on my xbmc black xbox) I'm doing this conversion using memcoder and this script I wrote.
Code:
#!/bin/bash
_Working()
{
_INPUTFILE=$file
[Code].....
And that makes for low quality and skipping up movies. basically I want to take the 3gp and convert to avi with leaving as much of the playback alone as possible. What is a better way to convert these files? How can I prevent these skipped frames? What would be the memcoder switches line to retain as much quality as possible while converting the files to avi?
We have an analog tv (no plans to buy digital) which I'm planning to connect to an old laptop so we can watch online tv. The tv has rca input ports for audio l/r and video, and also has scart of course. The laptop has both vga (not really relevant) and mini-dvi outputs plus, of course, audio line-out.I have seen that I can get a mini-dvi to rca converter. The strange thing in this connection is that the converter has three rca plugs, which colour match audio l/r and video but I thought that dvi was purely video and not audio/video.
However, I have heard that rca inputs tend to give a poor quality picture - not that we're so choosy when it comes to tv, vcr quality is quite good enough - and I have seen that there is an rca to scart converter also. Would this be a better alternative or is it a case of the weakest link determining picture quality?So basically I have three questions:
1. Does mini-dvi include audio?
2. Should I just buy the mini-dvi to rca converter or the rca to scart converter also?
3. Is there a direct mini-dvi to scart converter available that I haven't found yet?
One of the laptops that I could use runs Ubuntu 9-10. It's and old Dell that sits in a docking station. The other one is a MacBook Pro. I assume, however, that the mini-dvi output will be the same pinwise from either machine. Come to think of it, I also have an old tower model, also running Ubuntu 9-10 that has a mini-dvi output.
I've got a bunch of HD files in .mkv format that I want to convert to a format that the 360 will read (currently just trying .avi files) so I can stream the media to my xbox360. I'd rather avoid transcoding the entire file, so I tried unpacking the .mkv file into audio and video (and subtitle if necessary) and repacking said file into avi using ffmpeg. The repacking is where I am having the problem. Here's the commands I tried at first (it might look familiar):
Code:
mkvextract tracks file.mkv 1:temp_video.avi 2:temp_audio.ogg 3:temp_sub.srt
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy file.avi
However, I keep getting this annoying error:
Code:
Error while opening codec for output stream #0.1 - maybe incorrect parameters such as bit_rate, rate, width or height Where stream #0.1 is the output audio stream to the .avi file. I think I have narrowed it down to the fact that the input streams are all 6 channel (5.1 surround sound) which mp2 doesn't support (the ffmpeg audio default) so I did this instead:
Code:
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy -acodec libmp3lame file.avi
I'm still getting the same error, but when I use
Code:
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy -acodec libmp3lame -ac 2 file.avi
to change the sound to stereo it works. Problem is I'd like to keep my media in surround sound. Any thoughts on how to get all 6 channels in the new mp3 file? I'm fairly certain that mp3s support 5.1. And after some messing around, I haven't found that my ffmpeg can transcode audio format from 5.1 back to 5.1. So since (I think) the 360 can play .ac3 files I decided to just copy both the video and audio file to the .avi file sans transcoding using
Code:
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy -acodec copy file.avi
however now about halfway through, I run into this error:
Code:
NULL @ 0x22f3a00]error, non monotone timestamps 62562 >= 62562
av_interleaved_write_frame(): Error while opening file I can't seem to find any solution to this problem anywhere online, does anyone know how to get around this? I'd prefer to use ffmpeg for this if possible. (so I can write a script and just attack an entire directory at once) For what it's worth, I'm using the latest ffmpeg in the ubuntu (karmic) default repositories.
I am taking a Geology class this semester and we were assigned a CD that has an interactive program on it. I didn't like the access speed- especially when the narrator was supposed to talk. The DVD/CDRW drive had to spin up and... then the narrator spoke.I'm wondering if I can create an ISO image of that CD and then transfer it to a SD card so it's less noisy and less pokey than a CD.I only have Brasero at this point so I don't know if that program will be enough
View 2 Replies View Relatedi work for a nonprofit, so professional and personal hardware upgrades are unlikely in the near future in this time of budget cuts.
we plan to post some videos videos to help raise awareness of our programs, but the camera we got only records in h.264 mp4 format, which our aging machines doesn't like. video is choppy at best, though the audio remains intact.
so basically what i'm asking is, what is the best method for converting h.264 into a format friendlier to older machines?
I want to convert video mpeg files to mp4.
What program can I use to do it?
The problem is my video mpeg files on my site are just to big, something like 30 meg for a 1 minute video.
Don't reply if you don't know exactly what to use or do.
I have acquired a MDV 001 Mini Video Camera that works very well with UBUNTU. I want to transfer the recorded data from my PC to CD/DVD but the problem I have is, the camera records in AVI format but my video player can only handle JPEG. any conversion program AVI to JPEG which I could use.
View 5 Replies View Relatedi want to convert a song from ogg format to mp3 using ffmpeg the command i use to do this is
ffmpeg -i /home/john/Music/input.ogg to mp3 output.mp3
i then get then get a message back saying
"unknown format"
how do i correct this ?
The command line to convert to ogg theora
ffmpeg -y -i input.flv -sameq OUTPUT.ogv
runs perfectly on 9.04 but on 10.04 it gives errors:
Code:
ffmpeg -y -i input.flv -sameq OUTPUT.ogv
FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1, Copyright (c) 2000-2009 Fabrice Bellard, et al.
configuration: --extra-version=4:0.5.1-1ubuntu1 --prefix=/usr --enable-avfilter
[Code].....
i have a AVI file and i use DEVEDE and click on the first one "video dvd" then add file (i go it it and click on the file) setup ntsc then advanced options create iso ready to burn to disk click forward asks me where i want to put it (i use default) then after a while i have an iso file there --- to burn i just click and drag that iso file to a blank dvd and it burn it i have also tried K3B after i have my iso file i open k3b and use all defalt settings and burn it and i get the same results wrong disk when i put it in my dvd player.
View 4 Replies View Relatedhow i can convert mkv files to avi's that will work on my ps3.
View 1 Replies View RelatedI am trying to convert AVI video to MP4 for a PSP.
I have tried both AcetoneISO and Mobile Media Converter... both fail.
The error message from AcetoneISO is:
Quote:
Unknown encoder 'libxvid'
This was from using the "Convert video for PSP" option under the "Video" menu.
i have an n86 and i am a new ubuntu user. i have been trying to convert some videos and have been unable to find a suitable software.
View 2 Replies View RelatedI have a .mkv container with proper video (h264/~6000kbps) and audio (DTS/1500kbps). For some reason I want to have similar quality but with another video and audio codecs. For video it goes well and ffmpeg is very helpful here, no problems. Also, I want DTS to become AC3/320-448kbps/5-6 channels. Commands like this:
Quote:
ffmpeg -i in.dts/mkv -acodec ac3 -ac 5 -ab 448k out.ac3
gives me not proper reordered sound in channels, so I hear center on the right, music on the left, etc.
Is there a way to make that properly with ffmpeg?
Also, I have a question about multi core encoding cause I have a quad processor. Ffmpeg seems not using them in all the way, I get something like 25% of CPU usage while encoding. Command -threads, even using the h264, does not make any extra load of cpu.
I'm making little animated bits in GIMP with the gap package. I can only get GIMP to encode the files as .avi. Problem here is that when I try to use any converter, it compresses 80MB files down to 1MB-4MB files and, unsurprisingly, the video quality is terrible. WinFF and ffmpeg (via terminal) output at a drastically reduced size. Is there some way to keep the files big/big-ish? I don't want to lose any detail.
View 6 Replies View Related