I'm running ClipBucket on my Ubuntu 10.04 LTS server x64.Conversion of AVI to FLV works just fine, however when I try to upload an MPG file, it fails. Apparently I should recompile ffmpeg to allow for MPG > FLV conversions.
View 3 RepliesI've got a bunch of HD files in .mkv format that I want to convert to a format that the 360 will read (currently just trying .avi files) so I can stream the media to my xbox360. I'd rather avoid transcoding the entire file, so I tried unpacking the .mkv file into audio and video (and subtitle if necessary) and repacking said file into avi using ffmpeg. The repacking is where I am having the problem. Here's the commands I tried at first (it might look familiar):
Code:
mkvextract tracks file.mkv 1:temp_video.avi 2:temp_audio.ogg 3:temp_sub.srt
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy file.avi
However, I keep getting this annoying error:
Code:
Error while opening codec for output stream #0.1 - maybe incorrect parameters such as bit_rate, rate, width or height Where stream #0.1 is the output audio stream to the .avi file. I think I have narrowed it down to the fact that the input streams are all 6 channel (5.1 surround sound) which mp2 doesn't support (the ffmpeg audio default) so I did this instead:
Code:
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy -acodec libmp3lame file.avi
I'm still getting the same error, but when I use
Code:
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy -acodec libmp3lame -ac 2 file.avi
to change the sound to stereo it works. Problem is I'd like to keep my media in surround sound. Any thoughts on how to get all 6 channels in the new mp3 file? I'm fairly certain that mp3s support 5.1. And after some messing around, I haven't found that my ffmpeg can transcode audio format from 5.1 back to 5.1. So since (I think) the 360 can play .ac3 files I decided to just copy both the video and audio file to the .avi file sans transcoding using
Code:
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy -acodec copy file.avi
however now about halfway through, I run into this error:
Code:
NULL @ 0x22f3a00]error, non monotone timestamps 62562 >= 62562
av_interleaved_write_frame(): Error while opening file I can't seem to find any solution to this problem anywhere online, does anyone know how to get around this? I'd prefer to use ffmpeg for this if possible. (so I can write a script and just attack an entire directory at once) For what it's worth, I'm using the latest ffmpeg in the ubuntu (karmic) default repositories.
i want to convert a song from ogg format to mp3 using ffmpeg the command i use to do this is
ffmpeg -i /home/john/Music/input.ogg to mp3 output.mp3
i then get then get a message back saying
"unknown format"
how do i correct this ?
The command line to convert to ogg theora
ffmpeg -y -i input.flv -sameq OUTPUT.ogv
runs perfectly on 9.04 but on 10.04 it gives errors:
Code:
ffmpeg -y -i input.flv -sameq OUTPUT.ogv
FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1, Copyright (c) 2000-2009 Fabrice Bellard, et al.
configuration: --extra-version=4:0.5.1-1ubuntu1 --prefix=/usr --enable-avfilter
[Code].....
I have a .mkv container with proper video (h264/~6000kbps) and audio (DTS/1500kbps). For some reason I want to have similar quality but with another video and audio codecs. For video it goes well and ffmpeg is very helpful here, no problems. Also, I want DTS to become AC3/320-448kbps/5-6 channels. Commands like this:
Quote:
ffmpeg -i in.dts/mkv -acodec ac3 -ac 5 -ab 448k out.ac3
gives me not proper reordered sound in channels, so I hear center on the right, music on the left, etc.
Is there a way to make that properly with ffmpeg?
Also, I have a question about multi core encoding cause I have a quad processor. Ffmpeg seems not using them in all the way, I get something like 25% of CPU usage while encoding. Command -threads, even using the h264, does not make any extra load of cpu.
I'm making little animated bits in GIMP with the gap package. I can only get GIMP to encode the files as .avi. Problem here is that when I try to use any converter, it compresses 80MB files down to 1MB-4MB files and, unsurprisingly, the video quality is terrible. WinFF and ffmpeg (via terminal) output at a drastically reduced size. Is there some way to keep the files big/big-ish? I don't want to lose any detail.
View 6 Replies View RelatedRecently I installed gtk-recordMyDesktop, so that I could record my movements and send the Media File to my dad, so he could learn how to use Ubuntu too [plug]My problem is converting the .ogv file to .avi - I have tried ffmpeg but it loses quality dramatically.Can anyone tell me how to get better quality video out of ffmpeg, or let me know another way to convert the .ogv file to .avi or something that is widely used?
View 3 Replies View RelatedI've been recording one of my classes with my android phone, and the file it gives me is an .amr file. I'd like to convert that to .mp3, and I was hoping I could use ffmpeg to do it via the command line. Here's what I did, and the output that I got:
Quote:
roger@KarmaLaptop:~/Desktop$ ffmpeg -i Net202-week6.amr Net202-week6.mp3
FFmpeg version 0.6-4:0.6-2ubuntu6, Copyright (c) 2000-2010 the FFmpeg developers
built on Oct 5 2010 22:36:53 with gcc 4.4.5
configuration: --extra-version=4:0.6-2ubuntu6 --prefix=/usr --enable-avfilter
[Code]....
I have a file with about 6 .flv files and I wish to batch convert them to libmp3lame. I have tried making a #!bin/bash script with all the files in e.g.
Code:
ffmpeg -i filename.flv -sameq -acodec libmp3lame -f asf filename.mp3
I have inserted all the filenames individually into the script but when I ran it I got too many errors and i was wondering if someone knew a quicker way to do it e.g. a script that would batch convert all .flv files in that folder to .mp3 format.
I recently developed a taste for the Alac format and ffmpeg will oblige with this line of code
Code:
ffmpeg -i <input> -acodec alac <output>.m4a
and this worked beautifully one file at a time and
How does one do all the files in a given folder? Is there an asterisk one adds as in shntool.
Today I was trying to convert a video into Gray-scale.(Black & White) I was successful for avi, mp4 ..
And Now trying for 3gp..
Its giving me error which says like The parameter like bit rate, height , width provided is wrong..
what exactly extra parameter I need to put for 3gp
I want to convert all video file in folder a become audio file in folder b use ffmpeg, how to type it in terminal?
View 7 Replies View RelatedI tried to convert an AVI-video to a MP4-video for my ipod. Therefore I used ffmpeg as I can read in the FAQ
Code:
ffmpeg -i in.avi -acodec libfaac -ab 128kb -vcodec mpeg4 -b 1200kb -mbd 2 -flags +mv4 -trellis 2 -cmp 2 -subcmp 2 -s 320x180 -metadata title=X out.mp4
The problem is, that the given encoder libfaac is not installed and I can't get it through the pack-adminstration
[Code]....
command line option in ffmpeg to do this
I am told I need the output file to comply with this
Video Resolution: 480*320
Video Bitrate: 768 kbps
Audio Bitrate: 128 kbps
Video Format: MPEG-4 (be sure not to use H264, as it�s not supported in the current firmware)
[Code]....
i am using Ubuntu 11.04 on my computer system. I urgently need a good video converter for converting videos.I have already installed FFmpeg and men-coder,Winff etc. The problem is each has its own drawback.For instance ffmpeg cannot convert a .avi to .3gp with audio working. My preferences are the converter should be user friendly, should support all popular video formats.
View 2 Replies View Relatedhow can i merge two files with ffmpeg?
one is : /home/pt/t/pa1.flv
the other is : /home/pt/t/pa2.flv
1 o merge with ffmpeg
ffmpeg -i /home/pt/t/pa1.flv -i /home/pt/t/pa2.flv -vcodec copy -acodec copy /home/pt/t/dd.flv
the problem is: the merged file ( /home/pt/t/dd.flv ) just contain one file--the first one
/home/pt/t/pa1.flv,there is no the second file--/home/pt/t/pa2.flv in the /home/pt/t/dd.flv
[Code].....
how to increase the volume of ogg and mp3 files using ffmpeg. Some of the podcasts that I listen to are not loud enough, and I have my media player set to the highest volume.
View 1 Replies View RelatedSince ffmpeg 6 is out for some time, when will Ubuntu Lucid afford such a new ffmpeg package from its repository?
View 2 Replies View RelatedI have installed this program ok but I am new to command lines in terminal.
I want to convert some wav files to wma files. I have the wav files currently in a folder called Test to make it easy. So I have entered the following command line:
ajpearson@ajpearson-laptop:~/Desktop/pacpl-4.0.5$ pacpl --to wma home/ajpearson/Desktop/Test and the error message I get is:
error: the following is not a file or directory: home/ajpearson/Desktop/Test
It does not matter what directory I use I get the same error. I am sure the answer is obvious - but not t me.
I'm trying to convert a .MTS video file to .mov, and I need to use ffmpeg, because I want it to be scriptable.I managed to convert the file to .avi using this command:Code:ffmpeg -i INPUT.MTS -vcodec libxvid -b 18000k -acodec libmp3lame -deinterlace -ab 192k -s 1280x720 -r 50 OUTPUT.avi
View 3 Replies View Relatedhow to convert mp3 files into files with the m4a extension? Need to get music files to be recognized by my DSi.
View 4 Replies View RelatedI could stream the following file at my darwin server it means i am able to stream .mov files with 8KHz sampling rate and 20kb/s bite rate.
Quote:
# ffmpeg -i streamingloadtool.mov
FFmpeg version SVN-r10524, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: --enable-libxvid --enable-gpl --enable-libamr-nb --enable-libmp3lame --enable-libfaac --enable-libfaad
[code]....
The problem is i unable to stream this kuraiamr_nb.mov file at my streaming server. when i play this file in quicktime player its stating that this is a unsupported media type.
I am looking for an option to convert .vob file to mp4 format. Command "ffmpeg -i S.vob x.mp4" is giving error message "[libfaac @ 01cac110] Unable to load libfaac.dll". I tried to convert in other formats like .avi with the same command and got success. Conversion is decreasing the quality like hell. Though size of the file after conversion is as big as original then why this bad quality. Some where I have read if I will not specify any argument it will keep the quality same but here it is not happening. Not sure why....
View 2 Replies View RelatedI have some video files (.avi and .swf) & I need to convert them to the following format:
Stream #0.0(eng): Video: mjpeg, yuvj422p, 320x240, 30 tbr, 30 tbn, 30 tbc
Stream #0.1(eng): Audio: pcm_u8, 8000 Hz, mono, s16, 64 kb/s
how to do this with mencoder or ffmpeg?
How do I convert an ovg to avi file?
Why was ffmpeg removed in Jessie?
I read through more of this thread than I wanted to. [URL] ....
Does libav provide command line utilities to do something like converting ovg to avi, or determining the length of an mp3 file? Why is there absolutely no explanation as to why libav was preferred over ffmeg?
how i can convert mkv files to avi's that will work on my ps3.
View 1 Replies View RelatedI tried using Avidemux, but it's taking too long. WinFF doesn't work, acting like the codecs aren't installed even though they are. and that's about it..
View 1 Replies View RelatedI'm attempting to convert my mom's old CDs into mp3 files via Sound Juicer. The problem is the process starts at 10.6X speed but goes all the way down to 1.2 and takes forever!
View 4 Replies View RelatedI've got a few videos (MKV) which have AC3 audio, I copied them to my Xoom tablet but AC3 is not supported so there is no sound. Hence I need to convert the audio to MP3, can anyone recommend a good program for doing this?
View 2 Replies View RelatedMy sister has a Nintendo DSi that can only play music files if converted to aac format. I could do it on my desktop that runs Windows XP, but unfortunately my tower doesn't have an SD slot to do so. The laptop I'm using does have a slot and is running Ubuntu. The thing is, is there any way I can convert mp3 files to aac so they can play on my sister's DSi?
View 4 Replies View Related