How do I mount a ISO without root? There's my account that's admin and two others that don't have passwords or root privileges. I really hope its possible without having to edit /etc/fstab because that didn't help me because it mounted all the ISOs and I don't want to have to edit fstab every time I make a new ISO. I got the ISO by running
Code:
dd if=/dev/cdrom of=abc.ISO
I used the ntfs-config utility to mount my windows drives automatically at startup. While doing so, I had my USB-HDD still attached, and after making changes and rebooting, it did something unknown I didn't expect and I cannot mount my USB-HDD again, and it gives me the following error message:
Error mounting: mount exited with exit code 1: helper failed with:
mount: only root can mount /dev/sdb1 on /media/MyUSBDrive
I did manage to open it somehow, but then all the data was erased apart from ~3 GiB [edit: it's got some kind of extra drive built-in which is mounted as a CD-ROM drive, and when I open that one first all the files are missing in the actual drive, otherwise I get the message above]. I don't know what information I should include here, but my fstab looks like this:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
This line in terminal:
sudo mount -t ntfs-3g /dev/sdb1 /media/sdb1
Gives:
fuse: failed to access mountpoint /media/sdb1: No such file or directory
What should I do to recover my files and fix the mount error? [edit: at the very least, how do I backup my files onto my internal HDD so I can format it and recover it in this manner]
When I try to boot I get this error message:
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the systemwait long enough?)
- Check root= (did the system wait for the right device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-uuid/c946b41f-2f8f-4a28-8478-11a50d6fc0e8 does not exist. Dropping to a shell!
Booting from my 9.10beta livecd sudo fdisk -lu shows my root partition (sda5) but blkid doesn't, and there's no way to mount it.
I know similar questions have been posted before but they all involve using fsck or e2fsck, which don't work with my ext4 filesystem.
FYI Acer Aspire 7535G Kubuntu 9.10 AMD64
I'm really tired of having to umount under root, then mount again as a user for my external hard disk. When I'm in firefox, I like to save pages alot onto my external but I constantly have to remount because my user has no write permissions for the drive. What can I do for my device in fstab so that it mounts automatically under my user and not root?
View 9 Replies View RelatedI have read a few threads about samba and mounting, and cannot get it straight. Here is basically what I have done...
sudo mkdir /media/effjsands
sudo pico /etc/fstab
//10.1.121.36/sandsjh/media/effjsands cifs
credentials=/etc/samba/user,d_mode=777,f_mode=777 0 0
sudo pico /etc/rc.local
mount /media/effjsands
sudo pico /etc/samba/user
username=sandsjh
password=IamN0Tl33t34
I reboot and it does not mount. I can get Nautilus to open //10.1.121.36/sandsjh , so I know it is a valid path. When I go to terminal and run manually, I get:
sandsjh@LTL-IT-SANDS:/etc$ ./rc.local
mount: only root can mount //10.1.121.36/sandsjh on /media/effjsands
My computer developed a new trick tonight. 4 times in the last 2 hours it's booted & ran fine...for about 30 minutes or so. Then some apps become unstable & crash, and some don't notice anything wrong. Firefox keeps running fine, but if I have a nautilus window open, the next time you click anywhere, it crashes. So, try to restart the machine & it comes back with the "kernel panic -not syncing vfs unable to mount root FS on unknown block" message. The first time I restarted it, I managed to get to a root terminal & fsck the drive. It found 2 errors that it fixed, supposedly. The next collection of restarts, it would just go through bios, then grub, then hang on the error.
So, power down the machine first & then boot it....magically, I'm back to the desktop again for another 30-45 minutes. Anyone have any idea what's going on? It's been fine since the day mint was released...and the only system change was plugging my 2nd monitor back in 3 days ago. Why would it go kukoo in the last 2 hours?The machine is a quad core intel with 4 gigs of ram, Asus mobo and a 250gig sata drive for the system drive.
I have a dual booting newly installed 64 bit Ubuntu 9.10 on my machine. It was all fine until today. Now when I boot into Ubuntu, I see the error Failed to mount root filesystem. I cant remember any significant changes during the last session. One thing I remember is I upgraded the system using the update manager which asked me to choose an option for grub boot loader. I opted for its upgradation. After the upgrade, I was able to work with Ubuntu for a few more sessions. Windows XP works very fine.I checked other threads which suggested running fsck, but it did not help. fsck does not report any errors.
View 1 Replies View Relatedsomehow got Ubuntu 9.10 set up dual boot on my Vista laptop. I installed it somehow off the live cd. Everything working fine and then I decided to update from the update manger to Ubuntu 10.04 (dummy me)!
Got half way through installation and system froze for more than an hour. Had to shut down computer. Now when I select to boot to Ubuntu, computer freezes with this message:
[ 1.068088] Kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(8,1)
Can anything, within reason, be done? Should I use windows to uninstall Ubuntu and then try to re-install? If so, can someone tell me how I might have setup dual boot off the live cd? Should I just flog myself?
I'm trying to compile a "faster", more optimized kernel. It compiles ok, but can't mount the root filesystem.Here is my kernel configuration for the 2.6.33.4 kernel. My boot partition is ext4 on a two-disk FakeRAID array totaling 1TB.When trying to boot in recovery mode, it says I could mount /dev/sdaX, etc. but can't recognize my dmraid array. BTW,
View 4 Replies View RelatedI can't mount my Ubuntu partition. I was using my PC when it suddenly crashed, so I rebooted. When Ubuntu started again, it said that it was mounting, but I rebooted again. So, now when I start it tries to mount the main partition but it can't. Then appears <initramfs> and I don't know what to do.
View 4 Replies View RelatedWas using 10.04 and decided to upgrade to 10.10 with a view to upgrading to 11.04. No dice.
That was a few days ago so forget about that bit, no traces of 10.04 left now...
Downloaded the LiveCD version of 11.04 (twice, in case it was a faulty image) and install.
Every time I boot I get the "unable to mount root fs on unknown block (0,0)" error - no matter what I do.
I've tried reinstalling the system totally from the CD a number of times...
Tried purging and reinstalling Grub2...
Tried messing about with the grub bootloader settings...
And much more besides!
The system will boot perfectly off the LiveCD, which indicates to me that the 'system' is compatible with the computer?
I've done most of the things that a simple Google search on these forums suggests, with reinstalls in between but still can't get the PC to boot.
I have got and run the boot info script, although I'm in the middle of a complete reinstall AGAIN so will post the new version when it's done.
I am trying to expand my Ubuntu partition into my Windows 7 C: drive, but the win7 partioner will not let me shrink it because of immovable files. Is there anyway for me to but an loopback device in the windows partion, and have Ubuntu boot with that as the root device?
View 1 Replies View RelatedRecently installed some minor software, some games and Ubuntu Tweak, I am not sure if that's what caused this issue or not. I shutdown after the installations, then when I tried to start back up the small, white ubuntu logo appears just like it normally does, then it just goes to a black screen. I turned off the computer and restarted in (Recovery Mode). It goes about its thing then it says it is waiting for root file system, then after about 30 seconds it says "Gave up waiting for Root File System" how to fix this without reinstalling?
View 2 Replies View RelatedI recently (a couple weeks ago) installed Ubuntu on my desktop computer dual booting with Win XP (which I am using right now). I used Wubi to install it, and everything went fine. I used Ubuntu without a problem up until a few days ago. I am using an install of Ubuntu (I am not running it off a disc, USB drive or through the Wubi software).
I restarted my computer after using Ubuntu constantly for the time I've had it installed. It booted into Win XP (because it was first on the list where you select which OS to load) so I restarted again and tried to boot into Ubuntu. Instead of working, it gave me the error "Kernel panic - not syncing: unable to mount root" or something like that. So, I restarted again, and it was the same thing. I restarted in recovery mode, and it was the same thing.
I'm trying to talk the studio I work at into switching one of the departments to linux. (likely kubuntu). So I'm trialling it, but having issues mounting windows shares.It's working great; all except that only Root can write to the mount. I've tried a few different things with fstab, no go.Below is my fstab so far, and you can see the mountpoints.
Code:
# /etc/fstab: static file system information.
#
[code]....
I have had this problem since yesterday, I've looked around at previous archives, but I can't seem to find anything that works. When I boot up, the screen gives me the following prompt:
Code:
Mount of root filesystem failed.
A maintenance shel will now be started.
CONTROL-D will terminate this shell and reboot the system.
Give root password for maintenance:
[Code]....
I installed a update on a driver now i cant boot ubuntu. i select ubuntu,then ubuntu generic then i get this message. [ 1.772486] Kernel Panic -Not syncing :VFS: Unable to mount root FS on unknown Block (8,1)
View 9 Replies View RelatedFresh install on an acer.CRC=3691807100boots livecd fine selected to replace entire disk now presented with vfs error after install and reboot. This is a full replace install taking all the disk not a wubi install. Please help I don't want to have to reinstall windows 7 (PC has worked sweet as for 4 weeks with windows 7 just need to get back to ubuntu again
View 1 Replies View RelatedUploaded with ImageShack.us
Here was I get on my screen.
I don't know why this is happened. But before I rebooted, I could not see any content on Windows like update or shut-down (if I tried to install something and it asked for confirmation, that window was blank. Or before I shut down, I had to push enter, since that windows was blank.)
I don't think I installed anything and computer was working just fine before.
I don't want to reinstall everything again.
I understand at least some of the advantages of this multi-user set-up, but why would you have to become root to stick a DVD in the machine? I suppose I could go into root and chmod the mount command, but - why would it have been set up that way at all? Is it paranoia?
View 5 Replies View Relatedgot a client which rebooted one of their slackware servers and would not come up.Server is stuck at Kernel panic - not syncing: VFS: unable to mount root FS.I have booted into a live cd and mounted hdd1 but have not been able to get any further.
View 11 Replies View RelatedWarning - Windows user who doesn't know much Linux outside of writing programs. Do feel free to patronise providing you explain in detail .
I have a working Windows XP machine. I've installed a second hard drive (channel 1, slave to Windows XP master) and installed Centos (having checksummed the images and verified the media). Problem is it will not boot.
The exact text on screen is...
Booting 'Centos (2.6.18-194.el5)'
root (hd1,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-2.6.18-194.el5 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
[Code]....
I've managed to use the "Linux rescue" to at least ensure the box default boots to Windows. how to get Centos to boot.
Also, given I told Centos where to install to, and I've not changed anything since, how come it could not even manage to create a working system? Never had this problem on Windows (OK, always on Windows 98 but I never considered that an O/S ).
I want to mount my FAT32 partition automatically on startup. It gets mounted but the problem is that all the files in the FAT32 partition are shown as owned by root. Because of that I can't paste files or write to this partition. This is my fstab file
Code:
# /etc/fstab: static file system information.
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
[Code]....
Yesterday after new update I got Kernel panic - not syncing: VFS: Unable to mount root fs on unknown - block (8,2)
View 1 Replies View RelatedI wanted to try out the new Ubuntu 10.04, but since I don't have any CD's available I thought I could use my 9.10 CD and upgrade from it.
1. Installed 9.10 on the entire disk.
2. Went to update manager(?) and clicked the button to upgrade to 10.04
3. It successfully downloaded all the files.
4. When installing the new files it suddenly said that it failed to update, and it stopped. Then I went to do a hardware test, but none of the menus were working.
I had to do a manual shutdown, and reboot the computer. This time I was met with an error "Unable to mount root fs".
I figured the upgrade was the problem, so I reinstalled 9.10 to try without upgrading.
1. Reinstalled 9.10 on the entire disk.
2. Went to update manager(?) and started the normal update for 9.10 so the system would be up-to-date.
3. Same thing happened now, it fails to update and it makes my computer useless.
I've already checked my hardware for errors, can't find any. I've checked the CD for errors, can't find any. I had 9.04 on the same computer a few weeks ago, and it was rock-solid. Worked like a dream. I'm using Win7 now though.
Ubuntu(10.04) was working fine, then some program crashed or something, and I just switched off (power offed) the computer. When I restarted it, this sort of stuff comes:
Code:
mount /dev on /root/dev failed : No such file or directory
and some more lines like that, and then 'Busybox' starts with [intramfs].I booted Ubuntu from a pen drive and ran fsck on the main partition. I just pressed 'y' for a long time (it asks stuff like should it continue repairing or something), and then it was done. I restarted the pc and it booted normally - it looked as if everything was fine.I started google chrome, and it said it couldn't find a personal config file .. ok. Then I tried opening a folder - nothing happens. The system monitor doesn't open, and windows that do open eventually are completely blank. I restarted the pc (this time by doing the normal restart), and it gave me the same 'Busybox' thing.I did the same procedure again, and got the same results. (ubuntu boots, programs dont work, then I restart and the Busybox thing comes again)One More Thing : The Ubuntu installed on the hard disk had all the recent updates (including the latest linux kernel) while the pen drive thing was around 2 months old I think. So maybe that's the cause?
I have compiled a new kernel 2.6.35 and I can not boot because same error : kernel panic - Unable to mount root fs on unknown-block(0,0). i have motherboard ga-p55a-ud3r and controlleris sata .now i use channel in ACHI mode. when i change it in ide mode it boots but in low graphic mode. then i have compiled modules again with support ACHI_SATA mdoe in xconfig of kernel. but same error occur.
View 5 Replies View RelatedI am pondering a reinstall of a freshly installed Ubuntu; I may or may not take that drastic step.However, I have partitioned my drive to include a 16-GB partition labelled "Ubuntu-tmp", in my case /dev/sda7, with the intent of mounting that file system as /tmp. Depending on how I decide to go about the reinstall I need an answer to these questions:If I reinstall: Is it possible to designate /dev/sda7 to mount as /tmp during the installation process?If I cannot designate the mounts at install time, or if I opt not to reinstall: I can't really empty the /tmp directory in the root in order to properly use it as a mount point for [the file system on] /dev/sda7; many files in there are still in use by running processes. So how can I clear the /-mounted /tmp directory and assign it to /dev/sda7?
I have attached a screen shot of gparted to illustrate my layout scheme.The gparted manual suggests I select the partition, click [Partition]->[Mount]. Of course, my gparted drops a menu with [Mount] is absent and an [Unmount] option is greyed out.This raises a question of how I am going to mount /users and /var in their intended file systems (/dev/sda8 and /dev/sda9, respectively), because the [partition] menu looks the same for these partitions as well.
I'm setting up an Ubuntu server to replace my aged Pentium IV Slackware box. It's a Dell Inspiron 560 with modest core-2 duo processor, 8 gigs of ram, and a pair of good sized hard disks. I came upon a good deal on a couple of 40gig Intel SSDs. I'd like to use one in the server. I'd like to use the SSD for the relatively invariant stuff, because they write slow, and are life-limited in the # of writes. So:
/bin
/usr/bin
/boot
/etc
/lib
/usr/lib
/usr/local/lib
/mnt
/opt
The best way IMHO to achieve this would be to make the SSD the root, and mount hard drive partitions/filesystems to it to places such as:
/var
/media (Here you read and write giant files. Hard disks do this just fine. One will work especially fine if one particular hard drive is dedicated to this.)
/root
/home
/tmp
A quick "df" yields a list of filesystems. There are four that are not tied to any device!
/dev
/dev/shm
/var/run
/var/lock
(df also discloses that the root filesystem is presently standing at 502megs. Guess it'll fit in a 40-gig SSD). These deviceless filesystems worry me. Are they created magically on boot? What's required to make the system magically create them on boot? If I copy the filesystem over to the SSD and redo the grub config, will it Just Work? Web searches reveal subtleties WRT mount points.
I've just started using Linux Ubuntu. I had a frightening error message, I don't know why. But after browsing some replies to something similar on this site, I simply opened a previous session and found that all worked fine and I hadn't even lost any of my downloads and adaptations. ś Yes I've still got my third level key and everything.
View 3 Replies View Related