Ubuntu :: Major CIFS Errors When Accessing Shares Etc In 10.04 - No Response For Cmd 50 Mid 34703

May 1, 2010

Since upgrading to 10.04 I have had constant CIFS errors in /var/log/syslog

Eg -
May 1 10:33:46 eclair kernel: [ 933.789217] CIFS VFS: No response for cmd 50 mid 32895
May 1 10:33:46 eclair kernel: [ 933.794567] CIFS VFS: No response for cmd 50 mid 32900
May 1 10:33:48 eclair kernel: [ 935.721371] CIFS VFS: No response to cmd 46 mid 37294

[code]....

All shares mount and I can open them etc, but always those errors appear whenever I try and browse to it, read them etc. These shares are mount from a Windows 2003 Server and no other machine has a problem reading or writing to this machine. I have changed the network cable and network cards in both machines, with no success. If I copy a file from a local drive to a CIFS drive, the file on the CIFS drive becomes corrupted.

View 4 Replies


ADVERTISEMENT

Ubuntu :: CIFS VFS: No Response For Cmd 50 Mid 61462

Feb 10, 2010

I mount windows share with pam.(cifs) When I logon I receive:

CIFS VFS: No response for cmd 50 mid 61462
CIFS VFS: No response for cmd 50 mid 61461
CIFS VFS: No response to cmd 46 mid 61460

View 1 Replies View Related

Ubuntu Networking :: CIFS VFS No Response For Cmd 50 Using 9.10 Karmic Koala

Feb 2, 2010

I was also having a problem with the Shutdown / Reboot sequence taking ages due to using WiFi, WPA2 and mounting SMB shares. I wasted about 4 hours digging around before I finally realised that the solution involved Upstart. 1. Open a terminal and enter:

Code: sudo gedit /etc/init/network-manager.conf 2. Just below the description line add the following:

Code:
pre-stop script
/etc/init.d/umountnfs.sh
end script

3. Save the script and attempt a restart. I don't know if this will work for everyone, or even what version of Upstart you need for it to work, but it cuts my shutdown time from about 2 mins to about 30 seconds.

Note: This has been working for me about 90% of the time. Occasionally though I see that the script ends prematurely due to the TERM signal and I end up with the 2 minute wait again. I've added the following to the /etc/init/network-manager.conf file:

[Code]...

View 9 Replies View Related

Ubuntu :: Using Autofs With Cifs Shares?

May 27, 2010

I am attempting to set up autofs on Ubuntu 10.04 so that it can automatically mount cifs shares when wifi is connected. For some reason, it isn't working. First of all, I know the share is accessible because doing this works fine:

Code:
sudo mount.cifs //192.168.0.12/share /cifs -o credentials=/etc/samba/credentials
This is in my /etc/auto.master
Code:
/cifs /etc/auto.home --timeout=60 --ghost
And this is /etc/auto.home

[Code]...

View 3 Replies View Related

Fedora :: Where Do CIFS Network Shares Get Mounted?

Jan 21, 2011

I have mounted a windows network share using the gnome desktop environment, using Places -> Connect To server.The network share is OK, and I have the icon on my desktop and can see all the files.I want to be able to use this network as well in the console, so I need the mount point.What is the location on the filesystem were this networkdrive gets mounted? I find nothing in /mnt and nothing in /media also using mount to look at the registered mounts, there is no entry for the networkdrive.Nevertheless, I have this networkdrive now open in my desktop, and have an option to unmount it.I know that using the mount.cifs command you can specify the mounting point.

View 2 Replies View Related

OpenSUSE Network :: Automount CIFS Shares?

Jan 30, 2010

Question 1.I have strange problem in OpenSUSE 11.2I have /etc/fstab entry:

//server/projects /server/projects cifscredentials=/root/.credentials,dir_mode=0777,file_mode=0777,_netdev 0 0
service network running

[code]....

View 1 Replies View Related

Fedora Networking :: Windows CIFS Shares At Startup

Jun 3, 2011

After booting, the sda5 and sda8 mounts work fine, but the Windows shares haven't been mounted. If I enter the command: mount -a everything works fine. I don't know if this a timing issue, or something to do with the new systemd stuff, but it has happened in previous Fedora releases from time to time.

View 1 Replies View Related

Networking :: Unable To Mount Cifs Shares As User?

Oct 4, 2010

this subject seems to have been touched a hundred times, but after following all the advice google could provide, i'm still unable to mount cifs shares as user, here's the fstab line

<server> <mountpoint> cifs rw,noauto,credentials=/etc/gattonauth,uid=1000,gid=1000,dir_mode=0770 0 0
i've chowned the mountpoint to the user,
ive tried
chmod +s /sbin/mount.cifs /sbin/mount.cifs
suggested by http://www.linuxquestions.org/questi...-lenny-711337/

View 9 Replies View Related

Red Hat / Fedora :: Intermittent Slow Access To Cifs Mounted Shares

Jan 14, 2010

The shares get mounted correctly and you can navigate through the directories and open files.The only problem is that it randomly starts going really slow taking 30 seconds or longer to open a directory that has 2 or 3 files in it.I have tried quite a few things to try and fix this without any luck. Its getting to the point where I am having to consider recommending that we use windows instead, which I would rather not do as I think its good for students to experience different operating systems during school.

View 9 Replies View Related

Ubuntu Networking :: Mount Cifs With Charset Errors

Nov 18, 2010

I've been mounting our windows network by opening nautilus and typing in the address bar:

smb://<servername>/share

and I am prompted to log in, all is fine.

however, I need to use some apps where I need to pick the folder from a file list, which I can't get to work with the above connection.

I then created the following line in my fstab file:

Code:
//<servername>/<share> /mnt/fileserver cifs credentials=/home/<username>/.smbcredentials,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0

This appears to mount correctly, however there are some filenames on the server with the bullet character() in their name, and by mounting via fstab, the bullet shows as a question mark, but mounting from nautilus shows the bullet.

Anyway I can mount with fstab, and have all characters show properly in the filename?

View 1 Replies View Related

Ubuntu Networking :: Accessing Windows Shares From 9.10?

Feb 16, 2010

i have 3 ubuntu machines running 9.10. All of them are running SMB so that the Windows machines can access the shares on the Ubuntu machines, but the ubuntu machines can not access shares on the Windows machines. When I click to connect to a windows machine ( all of them running XP), it says "connecting to COMPUTERNAME.." It never opens the computer, and it always comes back with an error saying that it failed to connect. I haven't been using ubuntu for very long, so im not as savvy with it as I am on windows. All windows machines can see all ubuntu shares, just not the other way around and I'd like it to be both.

View 3 Replies View Related

Ubuntu :: Accessing Network Shares In Xubunutu?

Sep 21, 2010

I am using Xubuntu 10.04 and can't find where I can create shares as well as access network shares. In Ubuntu I just go under Places/Network and there are my shares. How do you do this in Xubuntu?

View 6 Replies View Related

Ubuntu Servers :: Accessing SAMBA Shares Since Upgrade?

May 27, 2010

provide support for a small business that uses Windows machines to access files stored on an Ubuntu server which has just been upgraded from 8.04 to 10.04 (32 bit version). Before the upgrade the users accessed their share by this batch file:

Code:

net use x: \servernamesharename /user:username

This would then prompt the user for his or her password which they would enter to allow them access to the share.Since upgrading to 10.04, the user gets a "system error 58" stating "The specified server cannot perform the requested operation"If the batch file command is changed to:

Code:

net use x: \servernamesharename

The same error message is given. The only work around I have found is to modify the file to read:

Code:

net use x: \servernamesharename /user:username password

This is not ideal at all as it makes the password protection useless.When I performed the upgrade I left the smb.conf unchanged. The smb.conf file is:

Code:

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the

[code]...

View 7 Replies View Related

Ubuntu Networking :: 10.04 - Accessing Samba Shares From Applications?

Jan 4, 2011

I have a NAS running Samba. My Samba shares are accessed from a Windows computer, it works very well.

With the kubuntu 10.04 computer, things are different : I can see the Samba shares in Dolphin, and copy files to the local drive, but lots of applications don't allow me to open a file on a Samba share.

Some applications such as OpenOffice let me browse to the share but refuse to open the remote file

Some other applications don't let me browse to shares at all.

What's up with that ? Surely I'm not the only one wanting to access files on a NAS ? How do other people do it ?

PS I chose kubuntu 10.04 because the 10.10 install hangs, the "ui" workaround I saw here and there did not work, the only solution offered was to go back to 10.04

View 3 Replies View Related

OpenSUSE Network :: Accessing Samba Shares In KDE?

Jan 6, 2010

I wonder how to get Samba share access working well...Dolphin supports Samba but it doesn't really mount anything, it seems... Non-KDE Applications therefor can't access samba that way. In Gnome there was a workaround for the same problem. You could simply go to ~/.gvfs in any application and find the samba mounted there.Is there anything like that in KDE? I set up a Samba mount via /etc/fstab for now but that is quite annoying because it fails after each Suspend, changing WLAN Access Points, etc. Then I have to go to the console and manually launch sudo mount -a to get it working again. How can I make things more comfortable?

P.S.: I'm even up for using something else than Samba to talk to my fileserver. However I don't know of anything that would work better in this regard. (NFS would have the exactly same problem for example)

View 5 Replies View Related

Ubuntu Networking :: Info For Accessing Shares On A Windows 7 Computer?

Dec 29, 2010

I just got my Ubuntu 10.10 laptop to finally be able to access my Windows 7 Professional's shares, and I'd like to share how I got it working. Whenever I would go to Places > Network on Ubuntu, and then double click on my Windows computer (sometimes after finding it in Windows Network > {workgroup name}), it would immediately bring up a box saying "Password required for {computer name}". My Windows password wouldn't work here, but I didn't even want to be asked for a password. In Windows, under Network and Sharing Center > Choose homegroup and sharing options > Change advanced sharing settings..., Turn off password protected sharing was already selected.

So, I eventually found out that samba (the program Linux uses to talk with Microsoft's SMB network share protocol) has a bug of sorts. The format of the SMB packets coming from a clean Windows 7 is known by samba. However, if you install Windows Live Sign-In Assistant (which is provided through Microsoft Update) on Windows 7, the packets coming from Windows 7 are modified, and samba can not handle this. A patch has been written for samba, but Ubuntu's repositories (which has samba version 2:3.5.4~dfsg-1ubuntu8.1) does not yet have that patch.

Also, it seems Microsoft has stopped Windows Live Sign-In Assistant from appearing in Programs and Features. It doesn't appear even if you specifically download and install it separately. I did, however, notice that the installer calls itself Windows Live Essentials 2011. So I found that in Programs and Features, and uninstalled it. It asked which components I wanted to uninstall, and I selected all of them. Rebooted Windows, and now I can access the share no problem. I also grabbed the offending packet using Wireshark before and after that uninstall. The packet is indeed different. Specifically, without Windows Live Essentials 2011, there is no mechToken in the packet.

The current version of samba available is 3.5.6. I may try downloading and compiling that later, and see if it deals with the change that Windows Live Essentials 2011 makes OK. Also, it may be possible to get the share working without uninstalling every single Windows Live Essentials 2011 component. You may want to try that if you would like to keep a component.

View 9 Replies View Related

Fedora :: Accessing Samba Shares From Fresh F15 Install

Jun 6, 2011

I am having a problem accessing my samba shares from my notebook that has a fresh install of Fedora 15. I know that the server with the samba shares is working since I can access them from the windose box. I have just moved from using Ubuntu to Fedora and have definitely found my home. How would I tell if samba is running (or any service for that matter) on my notebook? I Installed samba-client

Code:
yum install samba-client

Though I still cannot access the shares. All it shows is windows network.

View 3 Replies View Related

General :: Accessing Netatalk/AFP Shares From OS X Snow Leopard?

Jun 27, 2011

Recently upgraded Ubuntu home server from 8.04 client to 10.04 server and reinstalled all services therein. One of them is a Netatalk daemon that I configured in a fashion similar to this website:[URL]inder recognizes my server and the afp service, yet when I attempt to log in (using valid credentials), Finder indicates its the wrong username and password. I've tried altering some of the config files and my Google-fu to look for solutions

View 1 Replies View Related

Networking :: Samba Requesting Password When Accessing Shares ?

Apr 2, 2010

I'm trying to do the normal setup of sharing some dir's on my linux machine using samba, to allow a windows laptop to access them.

I've managed to get the printer shared and this is allowing to send print jobs, which come out beautifully! however the actual file shares still aren't accessible

Depending on my settings, if I have security = user then when I access from the windows machine I get a username and password box - I dont want this functionality, I want the system to access right away as it would between two windows shares.

If i change security = share then it simply lists the shares, but tells me they are all inaccessible.

I've googled and searched here, tried various different things but I just can't see why/where its asking me for the username/password combo.

Code:

From /var/log/samba/smbd :

Code:

View 5 Replies View Related

Debian Configuration :: Long Delay In Accessing SAMBA Shares

Jan 27, 2016

When I boot up, or come out of standby, etc, it takes about a minute for my Windows shares on Win 7 to show up under Network. Is there anything I can try that will make this initial connection faster? Either on Debian or the Win7 machine? I have the latest Debian vanilla. This is over wifi. My other devices list the shares right away.

View 1 Replies View Related

Ubuntu Networking :: Lucid - Accessing Samba Shares Incredibly Slow From Win7

May 16, 2010

Since "upgrading" (ha!) to lucid I have had a number of problems that I am working my way through. The latest is accessing samba shares from a Win7 PC. It takes minutes to open the requested share from the Windows 7 PC. File transfers, once the directory is accessed, can be measured in bytes. It is an absolute trickle.

AFAIK the smb.conf is unchanged and, in any case, there is no problem accessing the shares from another linux PC.

View 9 Replies View Related

Fedora Networking :: Accessing Windows Shares - Unable To Mount Location

Jan 15, 2009

We are using spare parts (Socket 775 Biostar motherboard, OCZ 500wat PSU) to build a computer that will just be another system in the house. I want this system to be running Folding@Home, and the F@H SMP client for Linux is much less of a headache than its Windows couterpart, so I would like this computer to run Fedora. My dad loves networking, and knows how to do it in XP / Vista, so he has always opposed my frequent use of Linux. There are ways of accessing Windows shared folders from Linux, but that I haven't figured it out yet. I want to access Windows shared folders from my Fedora 10. I don't know how to go about doing this, can anyone point me in the right direction? Do I have to install anything special? I can go to Places, and then Network (in Gnome) and I see "Windows Network", but when I click it, I get "Unable to mount location Failed to retrieve share list from server"

View 8 Replies View Related

Networking :: Samba Client Accessing Windows Shares On Secondary Subnet

Sep 13, 2009

I have a machine acting as a gateway for a private network. While it can ping hosts on that private network, I can't use samba (smbclient or smbmount) to access shares on hosts on the private network from that machine. Other machines on the private network can access shares on other machines - just not the gateway server.

Here's how the gateway is configured:

When I try to connect to ports 139 or 445 (via smbclient or smbmount) the mount() system call times out. As I mentioned above, I can ping those hosts, so UDP packets work but TCP packets seem to get blocked or lost.

View 1 Replies View Related

Networking :: After Upgrading From Win7-32 To WIN7-64 Can't Mount Cifs Shares

Jul 21, 2010

This is the first time I have run into issues mounting windows shares but I really can't figure this out. Can someone put me out of my windows misery please.

First off, last week I rebuilt my work PC fromWIN7 32bit to WIN7 64bit since then I can no longer mount the window share on my ubuntu server:

I recreated my windows share called "Linux" and used the properties, advanced sharing and added everyone, full access and my domain account full access.

If I browse to \ipaddress I can see my share and access it. From a XP machine I can see the share and access it.

From linux I use the same mount point as before, /linux I use the same fstab and it fails

Code:

I try this manually now:

Code:

Next I try to mount it:


Code:

I looked at my firewall rules and they seem ok.

Next test was connecting to my 2nd pc on windows XP no probs mounted first time.

What is wrong with my new Win 7 setup?

View 2 Replies View Related

OpenSUSE Network :: Mount Shared Directories - Accessing Window 2008 Shares From SUSE?

Dec 31, 2010

Using a SUSE server, what's the best method/tool available to mount existing shared directories? I have defined shares on a Window 2008 server and am attempting to configure the SUSE server.

View 8 Replies View Related

Ubuntu :: DBus Errors When Unmount Network Shares (Samba)

Sep 14, 2010

I often see DBus errors when I unmount network shares (samba). In every instance, they unmount fine. In every instance, I notice no weirdness. Yet these errors randomly come up. There's no pattern to it whatsoever.

View 1 Replies View Related

Fedora Servers :: Disable Samba Security To Avoid "Access Denied" Errors When Shares It Via Windows XP?

Aug 25, 2009

Does anybody know if there is a quick and easy way to simply disable samba security to avoid "Access Denied" errors when trying to access shares via Windows XP?

View 2 Replies View Related

Server :: Apache Response "HTTP Request Sent; Waiting For Response" Too Long

Jul 19, 2011

when I try to access any page even small html pages it stays like 3 seconds in HTTP request sent; waiting for response. state..even when I use Lynx locally on the server..bypassing any possible network issues..logs dont show a thing..the server itself is a high end server with nothing running on it apart from apache which is not serving anny clients now, firewall is disabled and hostnamelookups are set to OFF.

View 1 Replies View Related

Networking :: Can't View List Of Shares In Nautilus But Can Browse Shares Directly?

Dec 11, 2008

I run opensuse 11 at work. I'm trying to see the list of shares on a "server" that is running windows server 2000. If I try smb://server, it doesn't show any shares, but I can browse directly to it such as smb://server/share1. If I use smbclient, it returns the list of shares correctly. I guess I just don't understand why smbclient shows the list of shared folders, but nautilus cannot.

View 3 Replies View Related

General :: Administration - Managing SAMBA Shares And Giving User Specific Access For The Shares

Jul 28, 2010

I am working as a Linux administrator in a very small data centre with 5 servers with following routine tasks.

1. Managing SAMBA shares and giving user specific access for the shares.
2. Scheduling backup of some mount points with rsycn to store data in remote hard disk
3. User and group administration, with sudo access.
4. Creating and Managing Xen Virtual machines and giving access to other project teams.
5. Automating some tasks with Shell Scripting.
6. Managing FTP server for user uploads.

I have practiced a lot in my home laptop without RHEL training, Cleared RHCE and LPIC1. I want to do some advanced system admin tasks, but do not have option in my current data centre. With Above skills is it possible to get a job ?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved