Ubuntu :: Login Screen Cycles/loops After Upgrade?
Jan 8, 2011
I was running 10.04 until yesterday, when it occured to me that I could upgrade to 10.10. So I went to Software Center, set it to get normal releases and left it to do its job. The upgrade appeared to go without a hitch and I rebooted. The login screen appeared. But just before I could click on my username and enter my password, the screen went blank and a second later the login screen was back. But then just before I could click... Undeterred, after half a minute of frantic clicking I did manage to click on my username and get the password prompt. This time, the login screen didn't go anywhere. Yay. To cut a long story short, this is now my standard logon procedure. However, the plot thickens. I appears that instead of 10.10, I ended up with 11.04, Natty Narwhal, which 'was released in April 2011'. If I download an .iso of Maverick and install it over my current version, will it leave my data unharmed AND reset everything so that it works again?
View 5 Replies
ADVERTISEMENT
Jan 4, 2010
Every account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies
View Related
Jan 20, 2011
This is a mature Lucid installation on an desktop machine. After having to hard reset it after a lockup due to a misbehaving USB peripheral, startup and shutdown started behaving oddly (e.g. shutdown going to a login screen).
Now it is in a state where - on start up - after logging in successfully, the screen goes dark for a moment and then loops back to the login screen.
Have tried:
- booting in recovery mode,
- running dpkg repair (just an update of sudo)
- running in failsafeX - where problem is still present (so I assume the nvidia video drivers not to blame here)
Maybe relevant that:
- only one user account so cannot try logging in as another user,
- home folder is encrypted.
- hard disk has plenty of spare space.
View 5 Replies
View Related
Jul 22, 2010
I have a couple of question regarding the screen blanker on Gnome desktop.I used to use a 1024x768 display with previous openSUSE distribution. With 11.3, I discovered the new "auto-configure" X feature. The default screen mode was 1600x1200, but I changed it to 1280x1024.My gfx board is a Matrox G400 DH. Hardware acceleration is disable because of a missing mga_dri.so (fall back to software rendering).I find some screen blanker modules are using almost all the CPU cycles. Animations are very slow, and it can take long before a keyboard hit or mouse movement makes to leave the blanker.
So the questions:- Is there a way to define another (smaller) screen resolution just for the blanker ?- Who should I try to convince to add mga_dri.so back in Mesa again ?- When the monitor go to sleep (DPMS), the blanker still is running, uselessly consuming CPU times. (I can see that because at the first mouse/kbd event, the monitor wake up and shows the blanker running.) Is there a way to configure the blanker to stop running when the monitor is sleeping ?- There are some modules which load images from HD (not the diaporama which load images in ~/images). But the shown image is always the default built-in one. Where is the blanker trying to load images from ?
View 1 Replies
View Related
Jul 10, 2011
Firefox 5.0 turns my screen gray, ties up the CPU in a loop, and turns the disc access LED on. Itś FF 5.0 running on 11.04.
View 1 Replies
View Related
Feb 25, 2010
I installed Xubuntu 9.04 on an old Acer Aspire 1200 (PIII, 256Mb of RAM). The install went ok and I was greeted with a login screen at the beginning of every new session.
I later upgraded to Xubuntu 9.10 and since then I've lost the login screen. All I'm left with in the shell (tty1) for which I have to put in my login and password before I can do anything. Typing startx at the prompt starts the desktop.
how I should reinstall GDM or its XFCE equivalent?
View 3 Replies
View Related
May 13, 2010
I upgrade my system from 9.04 to 10.04, then when booting, I get the purple wallpaper and mouse, but nothing else, No login menu. I can hopefully connect to my system with ssh from another machine, I update everything, upgrade, etc etc, try to boot on recovery mode, and clean packages and so one...Nothing happens, still no login menu.
View 8 Replies
View Related
Jul 14, 2010
I did an upgrade on my system yesterday. After the completion of the upgrade on restarting the system the computer enters tty1 mode straight without giving me the GUI login screen making it difficult for me to work. The question does now is what could have caused this to happen ? Have i gottten something wrong somewhere?
To switch to tty7 mode i hit the key crtl+alt+7 but it gives an error message about an unknown user even after login in with my username and password on tty1. Start the computer on recovery mode and selected the option correcting broken packages and it produced a result requiring me to download some new packages. I have a huawei e1550 modem which i use to browse in Nigeria. I want to know how i can connect to the internet on the tty1 after insertion of the modem so i can download the necessary packages it requested on issuing dpkg command
View 1 Replies
View Related
Oct 30, 2010
Today I was prompted to upgrade to Ubuntu 9.1, and then again to 10.04
Doing these upgrades wreaked havoc on my system. I have been able to fix most of the problems that were caused but I am having trouble finding information on the following:
When I boot up the system and after passing the GRUB loader, the system freezes up at the login screen and I have to power down.
If I hit ESC at the GRUB screen and choose Kernel 2.6.32-25-generic (recovery mode) and then choose "failsafe graphic mode", then I am able to log in to GNOME as normal.
View 1 Replies
View Related
Mar 28, 2010
I just upgraded from 9.10 to 10.04 beta and now I get the login screen - but after logging in, all I get is a blank screen with a black bar on top showing just the time on the top right hand corner. If I CTRL+ALT+F1 and reboot using the command line, it restarts showing mythbuntu on shutdown. Im have nVidia GEForce 8600 - is this due the X crashing? I tried all these - no change
Code:
sudo dpkg --configure -a
sudo apt-get install --reinstall ubuntu-desktop
sudo apt-get install -f
View 9 Replies
View Related
Sep 29, 2009
I upgraded from fedora 6 to fc10 using a net-inst iso. Everything went great however when I rebooted gnome wouldn't start up and there were other error messages, however thats not my current question. I figured id login as root, I put my pw in and the screen briefly flashes and then back to login prompt. The flash is a message saying something about no shell. Same occurs when trying to logon to my main user account. I can boot to single user and see that all my partitions are there and the data is there. My password file has the shell at the end of the entries.
View 1 Replies
View Related
Jan 11, 2010
I was using Fedora 11 for the past few months. It was working fine. I upgraded yesterday to Fedora 12 and now every time I boot up, the fedora logo screen comes up, the "f" is filled up and after that the screen goes hazy. I was expecting the login screen but nothing comes - the system freezes sort of.
View 1 Replies
View Related
Apr 12, 2011
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
View 1 Replies
View Related
Feb 25, 2011
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies
View Related
Sep 17, 2010
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
View 2 Replies
View Related
Dec 22, 2008
I have a desktop running Hardy and till friday it was running good. Today is monday and I guess it has got monday blues like I get every monday at work.Today I tried to start it as usual but it just refused to go further than login screen. I just can not login. It just hangs it there. I do not know what has gone wrong. I did not change anything since friday and no one else uses it. Theres nothing in logs that could give any idea. It just hangs without any reason and is still on the login screen for ever. It does ask my username and password but then it does not go further.But to my surprise I tried logging in with root and it gave me expected error that system administrator is not allowed to login from gnome.
View 5 Replies
View Related
Aug 18, 2010
I have used Ubuntu since 7-4; I now have 10.4. However, in the last week I have been taken to the login screen three times. This could be potentially calamitous. Ctrl+Alt +Backspace have by default been disable since 9-4. There is no way I am pressing atl+Prtscr +K. I wonder if there is a new zap command in 10.4, and if so, how to disable it. I have never found the need to go back back to the login window. I am generally using the command line when doing this.
View 1 Replies
View Related
Oct 10, 2010
I recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
View 1 Replies
View Related
Aug 4, 2011
yesterday i installed slim login manager on my computer (eee pc 1018p, ubuntu 11.04), and now it cannot get passed the ubuntu loading screen (with orange dots underneath) when booting. i tried booting into recovery mode and that didn't work either. i also left the computer trying to boot overnight and that didn't work.
basically, during this loading screen that should eventually bring you to the login screen, i can alt+tab to see the progress of the load. the progress is stuck on
Is there anything I can do from grub to remove slim?or, is there any way I can access my ubuntu partition and save all my files?
View 7 Replies
View Related
Apr 15, 2011
I just bought this desktop from my friend and it runs win 7 and ubuntu 10.04. it worked very well the first two days until I changed the hostname of the system.
I did like: hostname myNewName
And everything worked fine. The problem now is when I start ubuntu and and reach username and password screen , I enter my password to login the screen becomes black and return me again to the screen where I put my password again. If I entered wrong password , the system message stating wrong password. On the other hand, when I try to run ubuntu from live-cd I can login easily and access my account.
My friend told me he removed Naultius package and reinstall it for some reason before he gave it to me. Note windows 7 is working properly.
View 6 Replies
View Related
Jun 5, 2010
I have just did an upgrade from 9.04 to 9.10. I am planning to go to 10.04 . After the upgrade everything was ok but I noticed the GRUB was still legacy. So I updated my GRUB to GRUB2. Now when I boot, after entering my logon-id and password, it just brings me back to the login-id screen (to logon on). Any indication of what is wrong and how I should fix this ?
I have no encryptions. [added comments] Currently reading thread about login loop bug with 9.10 Followed instructions about possible missing pre-release update but even if it did do updates, I am still login screen looping. Doing additional researches until someone answers with the fix.
did :
CTRL + ALT + F1 switch to one virtual console
sudo service gdm stop
[Code]...
View 7 Replies
View Related
Sep 28, 2010
When I try to login with my username, the one I created when I installed the OS, it seems to try to login but almost immediately kicks back to the login screen. No authentication error it just seems to just logout? The only change I made since last successful login was to add ". .alias" to the .profile file - the only entries in the .alias file are comments and "alias" commands. I have one other username but it is not in the sudo's list of users so I can not change anything in the master login.
View 3 Replies
View Related
Feb 22, 2010
I have program that work like Fedora Firstboot it's run only one time after finish installation. I have two questions to ask.
1. How can I start this application before gdm start (login screen or auto login)
2. How can I start this application in fix display resolution (800x600)
My method now is
(This is a part of script , this script execute from /etc/init.d/myfirstboot , I create symlink to /etc/rc2.d/S1myfirstboot for start it before anything)
gdm-stop # first time I use /etc/init.d/gdm stop
DISPLAY=:1
export DISPLAY
/usr/bin/Xorg :1 &
[Code]...
I don't understand why first time firstboot start the system will auto loging in but not complete yet and then my script is start and it's work does not fine I think that is another user is already login , but if I re run my firstboot again and again (by setting something that can revoke my firstboot and restart) it's work before auto login and every things is ok!
View 3 Replies
View Related
Mar 9, 2011
"Servers aren't meant to have GUIs because they are a serious waste of CPU clock cycles." I encountered this line from somewhere here in ubuntu forums, but how could I install tools like mysql wrokbench and stuff, w/c will make my life a lot easier as an administrator? or is there such thing as remote administration?
View 4 Replies
View Related
Sep 1, 2011
I'm planning on setting up a new Linux box expressly for distributed computing (BOINC, SETI@home, etc.). All things being equal, what's better- More clock cycles or more cores?
View 4 Replies
View Related
Nov 17, 2009
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies
View Related
Jun 18, 2010
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
View 7 Replies
View Related
Jun 3, 2011
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
View 5 Replies
View Related
Dec 8, 2009
I want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies
View Related
Feb 3, 2010
The graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
View 5 Replies
View Related
