Ubuntu Installation :: Will 64bit Flash Drive Then Boot Using A 32bit PC?
Oct 12, 2010
I am trying to use the usb startup creator to make a xubuntu 10.10 ( with downloaded .iso) startup disk to a 2gb flash drive. I formatted the drive to ext4, and when I start the usb creator I get this error: "Failed to install the bootloader."
1. Should I have formatted the drive to ext4? In the usb creator instructions the author used ext3 as an example.
2. I am using the 64bit .iso file. I am trying to make the drive from a 64bit pc running ubuntu 10.04 (64bit).
3. If I can get this to work, will the 64bit flash drive then boot using a 32bit pc? (I wouldn't want to install it, but rather boot to use as a portable OS.)
i have been working with computers since the age of 11 "22 now" and have taught myself everything i know, from computer repair & networking to Web design, music production and Graphics design, using programs like photoshop, dreamweaver, sony acid, i learned it all myself, anyways that's just a little insight!!!
OK so here is my problem, i have an OLD P4 2.8 GHZ PC with 512MB ram, last year i was able to burn i believe fedora 9 to a CD and install it on this PC before i removed the drive to use as an external drive. "Dont know where the CD went"
I just recently purchased a 40GB hard drive and am looking to reinstall Fedora 14 on this P4 PC, i want to use this PC as a HTPC just for internet, ..... and stream videos, maybe some internet games etc etc, my problem is my main PC cant burn any cd/dvds due to the Drive's being burned out from burning xbox games at 4x on a regular basis, the PC i want to install Fedora on only accepts CD's and even then it barely reads anything!!
Now that you know my situation i want to know if i can take the 686MB 32bit iso image and put it on a 2GB usb drive and boot/install it to the HD that way on my old P4 PC, i want Fedora 14 as my main desktop, no partitions or walk arounds. If this helps the mobo on that OLD pc with the P4 is a p4vmm2 v5 i believe the p4 is 2.8ghz, ram is 512mb and i was able to install a 64mb nivida card agp 4x over the stock 32mb agp card it came with!
Last year windows xp was sketchy on it, i installed i think Fedora 9 and it ran great, but at that time it was a 120GB maxtor ide, and i decided to use it as an external drive for my main pc to back up alot of goodies, in the end the drive just randomly stopped working and just a few faint clicking sounds before it died. The current hard drive i will be installing on this P4 P4VMM2 mobo is a 40GB Seagate 7200. In the end do you think i can do a HD install from a USB stick with this P4VMM2 MOBO with a 40GB Seagate 7200 HD.
My printer wont work on 64bit ubuntu, no drivers. Just for 32bit so I don't know all the technical stuff to get it to work if there was a way to, but anyways. I tried to run ubuntu 32bit and I have a lot of boot problems. Sometimes it will boot but most of the time it wont. I have to hard reboot every time 6 or 7 times just to get it to boot. I was wondering what could be the problem. For some reason I was thinking maybe it was my hard drive being to large (1.5 terabyte) its been a while since I've tried but I don't remember there being any error messages just a black screen. I've waited up to around 5 hours for one boot so I know I am giving it enough time. Is there a fix to make 32bit ubuntu use a large hard drive like that. I know there is one for the ram but I love ubuntu and would like to have a stable system and use my printer at the same time.
I try install F14 32 bit, f14 64 bit, f15 32 bit and Centos 5.5 and when it arrives at the end of the installation and reboot, my system no boot. I try install it on a Hardware RAID 1 --> 2 x 2TB. Motherboard Intel DH57DD, Core I5, 4 Gb DD3. (Windows 7 afeter install boot OK).
I have a 5 year desktop with 1.5GB RAM and the following specifications. AMD Athlon D400 Single Channel 64bit. Would it be advisable to install the latest version of Ubuntu "Lucid Lynx" 64bit on this pc?
I have downloaded the 64bit version of Ubuntu 10.04. I am currently using 8.10 32bit and I want to clean install 10.04 64bit version. However the one thing that is putting me off is that I have heard if your PC has 1GB of RAM or less then 64bit won't run very good because it uses more RAM than 32bit. (my PC has 1GB) So the question is: Does 64bit use more RAM than 32bit?
Ive been using Ubuntu 32bit on my work Dell E6400 for nearly a year now with no problems. It is capable of running Ubuntu 64bit and Ive tried out the live CD which seems ok. I have a spare 40GB HDD and a USB caddy so Id like to install Ubuntu 64bit onto that and start working with that as a trial. Once im happy I can get all the usual things I need for my work (like vpnc) working then I'll wipe the main internal HDD and install Ubuntu 64bit.
Apart from backing up my home directory, id like to backup a list of my installed packages as a list of reference so I know what to add into my new install. Is there a "apt" command to do this and list the packages in a way where if I install those packages, I'll not hit any dependancy problems by installing one before another?
Back in Febuary, my wife bought a Toshiba Satilite from Wal-Mart and a few days ago the hard drive got toasted. So now I'm using an 8gig usb drive as the boot drive. I also have 2 other flash drives for downloads and such but overall I am very pleased.
I'm running 11.04 32 bit and was wandering if 64 bit made a difference. I've got 4 gigs of ddr3. It's slow to boot, but once it's running, it's faster then Windows 7. Very nice.
Is there anything I should chage, use, since I'm running it off a flash drive??
I have 3 seperat drives, 2 x 16 gigs and an 8 gig, and was wandering which one would be best for booting off of? What do I look for??
Here's what I got:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Toshiba America Info Systems Device 9602 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
I demo'd 9.10 32 bit and got my wlan woking using ndiswrapper. Then, I decided to install the 64 bit version and I cannot get my driver to work. Can't find a 64 bit driver for my D-link DWA-130 USB adapter. What is the easiest way to uninstall 9.10 so I can install the 32 bit version? Is it as simple as reformatting the ubuntu partition?
I installed Ubuntu Lucid 64 bits, but found out that my laptop battery doesn't less longer on the 64 bits. I never had this problem with the 32 bits version. After going back to 32 bits lucid my Battery had much more time. My question is why are the 64 bits eats more battery energy than 32 bits version?
I am going to upgrade from Lucid 32-bit to Lucid 64-bit, and I have some questions as to what I need to do. My system is a dual boot of XP and Lucid, but I only use XP rarely nowadays. I know I have to do a clean install, so here goes. Do I have to blow away my current install of Lucid? If the answer to (1) is yes, what about Grub? How do I get a list of my currently installed applications?
Currently Lucid is on one partition. I have a Clonezilla copy of the file system. Can I restore the /home directory from that copy once I have installed the 64-bit system? If I decide to make /home a separate partition, are there any good rules of thumb about how much space to allocate to the various partitions? Are there any other directories or files I should consider copying from the Clonezilla copy?
I'm currently running 32 bit Ubuntu 10.10 on my laptop. Apparently, my computer can support 64bit OS. My / and /home partitions are separated and exist on different physical hard drives. Is it possible to just install 64bit ubuntu over my 32bit existing installation? Could I preserve the customizations I've made? what about application settings like chrome, firefox, compiz, etc.? Would I have to meticulously reinstall all of the little things I've done to my ubuntu installation?
Im installing a fresh copy of F12 on a laptop.What I would like to know is if I install the 64bit version will all none 64bit apps install and run.I have normal apps but do needs the lotus notes clientadobe apps, crossover linux, vmware etc.
Short of the story is I have an AMD64bit system for my 'server'. I find that there is lacking package support for ubuntu 64bit. Some apps I want to install work fine on 32bit ubuntu but not in 64bit ubuntu. More importantly the 64bit package for my ati drivers don't work, however they do on a 32bit version of ubuntu.
It would make sense to do a fresh install of ubuntu 32bit to avoid problems like this in the future. However my server has been running for years.. since ubuntu6. And it is highly customized. It would take too long to configure my server from scratch, I really want to avoid that. So I'm wondering, next time I do a dist upgrade.. say from 9.10 to 10.04. Is there a way I could trick the update manager in to upgrading to 32bit packages/kernel etc?
I am thinking about upgrading to 64bit Ubuntu 10.10 because I have heard it's good for gaming and makes things run smoother. Also, I know it's the new thing and I'm going to have to switch eventually. Point is I don't want to loose my data with the clean install and I was wondering if I backup my current system, which is 32bit (assuming there is a backup utility, I thought I saw one) will I be able to load that on my new 64bit install?
I've just installed Ubuntu 10.10 32 -bit on my machine. My hardware is Intel Core i5 2500K, ASUS ITX motherboard, 2x2GB DDR3 Corsair So-dimms and Vertex 3 SSD on SATA 3. I use the integrated graphics of Intel. Do you think I should remove my 32bit installation and then apply a new 64bit one? or even with 32-bit it's ok ?
New gateway laptop with a 330M nvidia card and windows 7. I partitioned the drive and made a dual boot with the 64bit 10.04. Everything seemed to be running fine. I installed the recommended drivers for the nvidia card (and also ran an update). I rebooted. Now I get the same thing whether in recovery mode, normal boot or even to a liveCD, first ubuntu with the five dots (with an odd green halo around them) then a few screens flash by and then blackness.
None of the f keys do anything, nor does holding shift during the boot and ctrl+alt+anything does not have an affect except ctrl+alt+delete will shut down still. Once in my frustrated button bashing I did somehow get a stretched out window saying there seems to be some graphics problem, from there I did get to a somewhat normal looking desktop. I didn't to do anything then, foolishly thinking I could do it again in the future (for some presumably unrelated reason I could not get online = no updates and no Internet help) I haven't gotten back there since.
After many failed attempts, I finally got Ubuntu on my Flash Drive (16gb). This was completed by downloading Ubuntu Desktop Edition (ubuntu.com), and using The Universal USB Installer to put the .iso on my Flash Drive.
When I try to boot my PC from the flash drive, I get a black screen saying...
"No DEFAULT or UI configuration directive found! Boot:"
So here is my situation: I am unable to boot from a CD I am unable to boot from a Flash Drive I have Ubuntu installed with Wubi, and can boot into it successfully I have a Ubuntu Installation CD I have created a partition into which I'd like to install Ubuntu. Is it possible to boot into my current Wubi Ubuntu installation, and then launch the Ubuntu installer from the installation CD, and then direct this installation to the empty partition I have waiting?
Basically, I think my question is this: Does anybody know what file to run manually from the CD in order to launch the installer?
I have built a small spare computer and I dont have a cd/dvd rom. I would like to install ubuntu 10.04 from a flash drive. The bios is AwardBios 3.01. I cant seem to boot from flash drive. I disable everything in the boot menu at the exeption of "removable device". In this sub menu I have; "LS120", "ZIP-100" and "ATAPI MO". In the "other boot device" menu I have "SCSI BOOT DEVICE". I have also changed USB to "primary" instead of "auto". There could also be a chance that I havent prepared the files on the flash drive properly.
I downloaded 11.04 last night and installed it onto a flash drive, but after I restart the computer and select the USB to boot first, it comes up with a boot error. I tried this on another computer to see if the iso didn't install right but it works completely fine. I don't know what else to do. I tried reinstalling the iso and redownloading also just for the hell of it.
I am trying to install ubuntu 11.04 from a bootable USB flash drive. As i couldnt create the USB using the inbuilt usb creator which came with the .iso file i had downloaded, i had used universal USB installer to create it. It took a lot of time to created the bootable pendrive.
I had copied the contents of the pendrive thus created to a folder on my hard disk and named it 'PENDRIVE'. Later i had formatted the pendrive and used it for other purposes.
Today, i wanted to install ubuntu on another computer, so i copied the contents of this folder to my pendrive (instead of creating a bootable usb drive using universal USB installer again) and renamed my pendrive as 'PENDRIVE'. But when i tried to boot from it (i had changed the boot order of my computer accordingly) i got this message, 'remove any removable cd or media and press any button to restart'. Until i removed the pendrive my system refused to start and i was unable to install ubuntu. Why did this happen?
Did anybody tried installing the latest adobe flash named Square for amd64 systems? I was interested in knowing whether there is any improvement in the performance. I also want to know how to replace my existing 32 bit wrapper based flash on 64 bit browser and install this 64 bit flash.
Sometimes you get more than you ask for and in this case, I did: I had no idea (had the computer for a few years now) that I was running a dual core 64 bit machine. The silly thing is that I have 32bit Fedora 11 on it, 32 bit versions of all my installed software...etc., etc. Am I able at this point to salvage anything or is it best to just back up the home directory and then do a reinstall?
