I have mint installed on my 80gb drive and want to install another distro alongside it! So far none of the distros I have tried have been able to do this themselves.How can I partition the drive for another distro? I have gparted installed and on cd.Please walk me thru the steps,
View 2 Replies
I was surprised not to find an existing thread on this anywhere, as I would expect this to be a common problem: I have the following partitions on my eee PC 100HE:
10GB Windows XP
5GB Linux Mint 8
5GB Ubuntu 9.10 NBR (awesome distro by the way!)
130GB Home partition shared by Linux Mint and Ubuntu NBR
2GB Swap partition shared by Linux Mint and Ubuntu NBR
I installed Ubuntu NBR after Mint. Immediately after install, the panel layout, menus and colour scheme were slightly messed up - presumeably because they had been "adopted" from the Mint settings in the home folder. I corrected them easily, but now I have the same problem in Mint. Is there any way I can get both distros to use the same /home folder, but different settings (i.e. the /home/username/. folders)? Can I get these settings folders put on a different partition for example?
And is this problem due only to the fact that these are 2 Ubuntu-based distros? Or will I have the same problem if/when I replace Mint with another distro, such as Fedora or Moblin?
i made a 10gb partition last time i had linux installed on my netbook. im trying to install ubuntu nbr on that partition when i try to select the 10gb partition(comes up as free space) it says "No root file system is defined please correct this from the partitioning menu" ? I dont get it last time i installed it i had the option to resise my windows partition thats how i made it.
View 2 Replies View RelatedI have created startup disk on my external USB HDD (on /dev/sdb1), I have been using it for some time, installed lots of software etc.Now I would like to install it properly onto the same HDD. I have partitioned the rest of the drive (formatted /dev/sdb2 as ext4 for it), but when I try to install, the installer complains about needing to unmount /dev/cdrom (which is in fact a loopback image on /dev/sdb1), although I don't want to touch that partition (even unchecked grub option).
So, couple of questions:
1) How to install it onto the same USB HDD, different partition?
2) (optional) How to preserve everything I have installed?
Code:
$ mount
aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /dev type devtmpfs (rw,mode=0755)
[Code]...
I have a new 1.5tb internal drive I want to partition as NTFS (because Windoze machines need to see/use it) and in gparted, when I go to partition -> new, it says it could not add this operation to the list a partition cannot have a length of -1 sectors. I recall having this issue on my 2tb external drive and I ended up creating the NTFS parition on a Windoze machine and then bringing it to the Linux box but since this is an internal drive, that's not an option. I took all the defaults in the "Create new partition" screen.
View 1 Replies View Relatedi have a laptop with windows 7 and its 64 bit and its got 1 had drive which is 300gb and i got 250gb of free space so when i try to partion it i partion my drive. i right click my hard drive which has 280gb free space and click on shrink and then selcte 20gb then go to unaclocated space and then click new voloume then i click next a couple of times and then i get this eppro.
View 9 Replies View RelatedI've got a problem I've been trying to work out for a while. I have a 160gb drive, and only 15gb dedicated to Ubuntu's installation because of a screwup. I have very little resources at my disposal, as I'm using a netbook with no optical drive, and I can't seem to get the liveusb to work. It just stalls after the menu with an error message. I have no way to connect my machine to the internet, and I've been forced to transfer files from a friend's computer. I'm running out of ideas, but one I thought of was to copy the install partition over to the larger partition. I'm not sure if it's possible, or if it would make a larger install or just a copy of the same size. I just want some clarification on how I would solve this issue, even if my idea doesn't work.
View 1 Replies View RelatedI got Lucid Lynx and i want to partition the drive into two harddrives when i install, like with windows i would have my harddrive made into C and D and i would have windows on the C and all my movies and stuff on D. I saw some things about making the rest of your space to store files in the /home files but i when i log into ubuntu after installing it shows the /home folder inside the disk. I dont know if it makes sense but, i was wondering if u can have it the way windows does it so it looks like two harddives and which options to select when i'm paraitioning. i really want to change over to ubuntu i just wanna work this out first cause i dont know so much yet haha.
View 2 Replies View RelatedI have been looking around and cant really find a guide on how to do this, I have found guides on how-to put a live CD on a usb flash drive, but this isnt want i want to doI want to use a high-end USB flash drive as a sort of SSD to put my boot partition on, I think if i do this it will decrease my boot time significantly. If it works i am going to take the back case off of my laptop and install the guts of the flash drive inside my laptop, i think the mod would be cool, i just dont know how to do it on the software side
View 6 Replies View RelatedI use Windows 7: Home Premium and I have three partitions on my hard disk. Lately I installed Ubuntu NOT on C: (win 7) BUT on D: (size 104 GB). Now, I CAN'T find the drive (D:) on Ubuntu. However I can still find it on Win 7.
View 9 Replies View RelatedI have recently ghosted, using g4u, an 80 gig drive to a 30 gig drive. The data size is about 15 gig so no problem there.The system does work and it doing everything it should, except for some errors in dmsg log.The thing is though, that the system works! all the services are running and live.And i have years worth of customizations in this machine. Has been running for several years, so i dont just want to reformat and reinstall. Its hard to get linux the way you want it sometimes!So my question is this, is there a way to fix my partition or somehow tell the machine what the current boundries <i>should</i> be?
View 5 Replies View RelatedI want to install Ubuntu (10.10) on the 1TB drive I need to unplug the SSD while installing it in order to dual boot by pressing F8 (the way I want it to be) so that Grub doesn't get installed on the SSD. What I want to know is can I partition the 1TB drive to install Ubuntu without any data corruption or anything? I have read that NTFS can lose data if partitioned with data already on it (I have no way of backing up my 100GB of files on the drive, as currently this IS my backup drive). What I want to do is have 900GB for files, and a 100GB partition (or partitions adding up to 100GB) for Ubuntu- what is the best way to do this? I don't need seperate partitions for ubuntu, can I install the whole thing to the 100GB partition and boot from it? Or do I need swap as well? I was thinking of making 900GB partition, 4GB partition for swap (if needed) and 96GB partition for Ubuntu (/ if I understand) as this is what the "erase entire drive" option creates.
View 9 Replies View RelatedDue to school, I need to remove the ubuntu partition from my hard drive because I need space I allotted to ubuntu.
I have an acer aspire one netbook.
I need to know how to remove Ubuntu and restore my hard drive without loosing my windows files (which are on a separate partition), I know i have to delete the ubuntu partition but what i am unclear of is what to do after that to restore windows as the primary boot.
Is there any performance degradation or complications that arise from having Linux installed on a separate, physical hard disk from Windows in a dual-boot setup? I have a computer that I'd like to dual-boot Ubuntu and Windows but the current hard drive is quite fragmented and the Windows partitioner won't allow me to make a partition large enough to comfortably run Linux+several gigabytes of media that need to be stored. The rig, however, may have room for another internal drive, so I thought that having a separate physical disk reserved completely to Linux would be an easy solution. The tech guy at the local computer store suggested there might be difficulties with this configuration because one drive needs to be the "master" and the other a "slave", resulting in boot complications.
View 5 Replies View RelatedI'm upgrading from a 250GB drive to a 500GB drive. I booted into the live-CD, ran gparted and created the necessary partitions:
/dev/sda1 ext4 /
/dev/sda2 swap
/dev/sda3 ext4 /home
then I used dd to transfer data from the old drive to the new drive. Now I am unable to boot into the new drive. I tried to boot again from the live-CD but fdisk reports that the drive has no partition table. I can still mount the devices (e.g. mount /dev/sda3 /mnt/sda3) and I can see all the files. But without a partition table, I can't set one partition to be bootable. Why doesn't gparted create a partition table? it created the filesystems just fine. how do I boot into the new disk? What do I have to do to make grub handle the new disk?
Hey everyone, i am trying to install 10.10 on a netbook i have, and i did it all okay, but it would not boot up, so I want to re-format the hard drive, but the hard drive is not showing up on the partition editor (only thing that is showing is the usb i'm booting up off of)
I finally got it to install windows xp, but i really only want to put ubuntu on it (no need for windows on a net book)
We had a drive failure on /dev/sda. Everything 'except' boot was on raid5 across sda, sdb, sdc, sdd. I know how to repartition a new drive and rebuild the raid etc, but I don't know how to regenerate the files that reside on the boot partition. I really don't want to re-install as we have lot of custom code and software that may depend on our current libraries and build environment.
View 1 Replies View RelatedI have a very specific issue that I am having trouble resolving. I have an old laptop and a new laptop with a smaller HDD. I want to copy the windows partition from the new lappy to the old bigger HDD so I have room for Ubuntu. All of my files are on a Maverick install on the old lappy. How can I get all my files and windows to the old HDD and into the new laptop. I am a little stuck on this one because of my limited options.
View 8 Replies View RelatedI'm trying to "upgrade" from ubuntu 9.04 to ubuntu 10.04.2 via a clonezilla (using a maverick usb clonezilla software with it's vmlinuz and initrd.img). but this clonezilla is not from a bootable usb flash drive, usb drive or CD, it's from the hard drive.
Here's what I have:
1) one 500gig drive with a primary partition under LVM. this partition has a 490gig root partition (ubuntu-root) and a 10 gig swap partition (ubuntu-swap_1). It has an extended partition (/dev/sda2) that's not under LVM consisting of one logical drive (/dev/sda5) that is the /boot partition.
2) I've upgraded the grub to grub2 (version 1.96) which has better features.
3) I've deleted the swap and reconfigured this partition with a name of (livehd) and it has an ext3 filesystem. I've copied the clonezilla software to this partition which also has the ubuntu 10.04.2 image that I want to restore to the root partition.
4) I've modified the existing grub2 using the 40-custom file so that the grub menu has the "Clonezilla Ubuntu 10.04.2 upgrade" entry in it.
5) the initrd.img from clonezilla has LVM support since I opened up the image to a directory using "gzip -d -c /boot/initrd.img|cpio -i" to check it.
6) grub2 sees the (ubuntu-root), (ubuntu-livehd), (hd0,1), (hd0), and (hd0,5) devices and can list (ls) their directories
[Code]...
i want to install windows 7 and ubuntu studio on the same hard drive(dual boot) but that is not a problem for me.since ill be using both i want a third partition to store all music images etc from both the OS's.i think the 3rd partition should be fat32 so that both windows and ubuntu can access it.but windows needs a system reserved partition nowadays and ubuntu a swap.so that makes a total of four partitions.So how can i make my fat32 partition?
View 9 Replies View RelatedWhat im trying to do is install ubuntu on to an external hard drive, partition it and make it work. ive got a problem, as i have 200GB of games and other things already on that drive, before you say "copy it to another drive and then back" i cant, i dont have any other drives apart from my internal which has only got 20 gig left
View 5 Replies View RelatedI wan trying to install Debain on a 4GB USB drive while running the setting something happened with my pc and i had to restart it.I try to boot from the USB drive it worked but was giving a empty cursor. the installation did not continue.i open the USB drive in my pc now but it shows just 300 MB space and lost the 3.7 GB space.I think space of USB drive with that partition, can i recover my USB drive lost partition space ?
View 4 Replies View RelatedI'm installing RHEL 4.x to a hard disk that already has windows 7 enterprise installed. I would like to dual-boot both the OSes. The hard drive size is about 220 GB (of which windows 7 occupies about 50 GB).Now, is there any free and friendly tool that I can download to partition this drive ?RHEL comes with a text mode (disk druid) to partition and I could not figure out how to resize the existing windows partition. So, I'm assuming that I need to abort the linux install now and proceed to boot from another CD that contains a good partitioning tool and then later resume boot from RHEL install disk.Also, what should my partitions look like ? What size should they be ? The system is a new LENOVO with 4 GB RAM on a i5 core processor.I know that I will need atleast 5 partitions. right ?1) /boot2) /3) /home4) swap5) /var
View 2 Replies View Relatedit will have a 1TB HDD with Ubuntu 10.10 Maverick Meerkat. I want to reformat the drive and do some kind of advanced partitioning. I want to have 2 installs of Ubuntu11.04, that way I can have Unity AND Gnome 3. Is there a way I can partition it so they share the home and swap partitions? (2. / partitions, 1 /home and 1 swap) How would I do that?
I will also need 2 partitions for Windows 7 which I use for work. (No, I do not want to use VirtualBox) My Windows 7 cd creates a second system reserve partition. I don't know if this will make me run out of partitions. I hear you can only have a max of 4. My idea above has 4 partitions for Ubuntu alone.
I created a bootable Debian installer on my USB flash drive. The Debian Installation Guide advises;
The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of your choice. This could be useful if you have only one stick or just want to keep everything you need on one device. Create a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it.
I want to put non free firmware packages on the stick but when I try to create a FAT partition in the free space using Disk Utility I get the following error;
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdb, start=661837824, size=7507093504, type=
Entering MS-DOS parser (offset=0, size=8168931328)
MSDOS_MAGIC found
looking at part 0 (offset 0, size 657457152, type 0x00)
new part entry
[Code] ....
I formatted the drive to clear it, created a new FAT partition and copied the Debian.iso to it again. When I tried again to create a partition in the free space the same error occurred.
how do I install fc12 from a hard drive partition? I downloaded thec12 dvd iso file...when I burned this to a DVD it wanted to install from my DVD and not a file on external media.---------- Post added at 08:03 PM CST ---------- Previous post was at 07:53 PM CST ----------this looks like it:[URL]
View 5 Replies View RelatedI have a 1TB segate hard drive. I want to partition that hard drive for open suse for installation. What would you consider to be the best size method for partitioning?SwapPrimaryHomeRoot
View 1 Replies View RelatedI have two distros and windows installed. I only want one distro (I have decided on Ubuntu) and windows. But, the other distro, the one that I want to eradicate is the last one installed and it is its GRUB in the MBR.
I know what happens from experience if I just delete that partition with a liveCD - GRUB won't boot anything on reboot.
What do I need to do from within Ubuntu or the other Linux before deleting the partition of the second distro so that I have a working GRUB when I reboot ?
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
I would like to build an oem style install partions that is bootable with menu to choose if I want to run install or boot already installed system. I would like to include current source packages on the same dive so if I don't have internet access at time of install, can can still install what I need.I know with Windows Vista and Windows 7, you can get this but how can I do this with Debian?
View 1 Replies View Related
