Ubuntu Installation :: Upgraded From 9.10 To 10.04 No Any Drive Found?
Jun 14, 2011
I did an upgrade on the weekend from Ubuntu 9.10 to 10.04 (karmic to lucid). Now, when I restart my computer, it goes through the regular load screen showing my P5K Asus motherboard, just like before but instead of showing the Ubuntu load screen, it tries to start grub ("Grub loading stage 1.5") but fails and then says "No any drive found" and the screen goes black. I've tried changing the drive configuration in the BIOS to AHCI or RAID and that didn't work. I've tried disabling JMICRON but to no avail. I'm running out of options here.
View 6 Replies
ADVERTISEMENT
Dec 1, 2010
I recently upgraded from 9.04 to 10.04LTS , i wanted to start a fresh and i click the option for Ubuntu to use entire hard-drive. However on closer inspection Ubuntu has created two partitions , one sized at 289 GB and the other at 8.5GB the 8.5GB partition is the one with the os installed on it. It is sadly locked and i cant combine the two partitions :/.
View 2 Replies
View Related
Jun 13, 2009
I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
View 7 Replies
View Related
May 27, 2010
I've always used a Seagate external drive (USB) for backup of data.
Now, for whatever reason, the drive isn't recognized/found/seen/appear.
For that matter- none of the USB stick memories I connect are recognized either on any of the USB ports I hook them into.
All of the USB stuff works perfectly in Windows.
View 9 Replies
View Related
Nov 20, 2010
I've built a new computer and successfully installed XP on it. I've tried to install Ubuntu 10.04 64-bit edition from a pen drive and CD. I can boot into the pendrivend use it however when I try to install it doesn't recognize the harddrive.At the moment there are no jumpers on the harddrive although I've tried them in several positions to no avail. I've also tried plugging the harddrive in several of the SATA ports on the motherboardeven tried unplugging the DVD drive altogether.. no joy. I also went into the Bios and changed the mode to AHCI (it was set to IDE)My motherboard is a Asus P6X58D-E with an i7processor and 2Gb ram.The harddrive is a 500Gb WD5000AAKS
View 7 Replies
View Related
Mar 16, 2011
The brand new MEMOREX 24X Lightscribe DVD player(SATA) is not detected by my UBUNTU 10.10 install (via USB stick LiveCD install). I know it should have worked out-of-the box, but it does not, dmesg or lshw command shows all other SATA connections ( 2 hard drives) , BUT the DVD Drive. The DVD drive is detected by the MSI BIOS, it is also fully functional in the dual-booted Windos 7 installation next to the Ubuntu 10.10, so I know the DVD player is ok. I have the latest B3 Stepping MSI P67A-GD65 motherboard with Intel i7 2600K cpu.
View 3 Replies
View Related
Jul 9, 2010
I have an old Dell Dimension 2400, currently running winXP. It has a second hard drive attached onto which I'd like to install ubuntu. The drive is visible in My Computer, but when I began the install process, ubuntu didn't give me any option to install on the second drive; it doesn't seem to see it's there. I went into the Setup menu and the drive isn't found there. Does anyone know what I need to do to configure things so that I can get ubuntu onto the second HD?
View 2 Replies
View Related
Nov 18, 2009
I'm trying to install Fedora 12 on my EeePC 901 from a 8GB USB stick. However I get the error each time after clicking Next on the boot loader setup screen. Code: Missing ISO 9660 Image The installer has tried to mount image #1, but cannot find it on the hard drive. Please copy this image to the drive and click Retry. Click Exit to abort the installation. I tried this with the DVD as well as the net install image. I tried setting up the USB stick with unetbootin and semi-manually [1]. I still get the same error.
I've set up the first 4GB SSD (sda1) as / ext4 partition and the second 16GB SSD (sdb1) as an encrypted /home partition. sdc1 is the USB stick and sdd1 is a 16GB SD card in the card reader. They are not used in the installation. I realize, that the 4GB / partition will probably be too small etc, but I'm just trying to get the installer to go the package selection page.
View 10 Replies
View Related
Jul 11, 2010
I downloaded and burned the Fedora-13-x86_64-dvd iso to install on my shiny new box (MSI NF980-G65 MB, AMD Phenom II x4 945 CPU, 8GB Corsair DDR3 memory, generic ATAPI DVD drive, 2 500GB SATA drives, 2 1.5TB SATA drives). I boot from the DVD and and take the default install/upgrade option on the menu. I've tried with the default boot options and with about a dozen different options, all give the the same thing.
Looking console 3, shows the following:
ERROR loader: removing ddmode.conf failed
ERROR loader: got to setupCdrom without a CD device
It can't find the CD/DVD drive that it booted from. The install on console 1 is prompting for a driver to load. Do I need to download a driver for a generic ATAPI/IDE CD/DVD drive?
View 10 Replies
View Related
May 19, 2010
I recently decided to install Ubuntu on a couple of computers without CD drives (netbooks), so I followed these instructions to create a bootable flash drive: http:[url].....That worked fine for both netbooks. Now I'm trying to use the same flash drive on a desktop currently running Windows Vista, but get his message when I try to boot from the flash drive:
No DEFAULT or UI configuration directive found!I tried to boot one of the netbooks from the flash drive again and that still works.I'm thinking a BIOS setting.
View 9 Replies
View Related
Oct 21, 2010
I upgraded a week ago to ubuntu 10.10 (amd64). I was unable to boot in 2.6.35-22 so I have been using 2.6.32-25. I tried again last night after installing updates to 2.6.35-22. Still no luck.I gave up since this was much like what happened a week ago and I couldn't find any solutions then. (I ran memtest then.)
View 3 Replies
View Related
Nov 12, 2010
The software manager has been nagging me to upgrade from 9.10 to 10.04 for some time now. I finally gave in and clicked on Upgrade. After the upgrade completed, my computer won't start. It just flashes Ubuntu for a split second and goes to a black screen. I happen to have the 10.04 CD from Canonical, and I tried that, and it won't launch the installer either; just a logo and a black screen. Since I can't even get to the terminal to diagnose and fix whatever's wrong, I'm installing 9.10 from the CD that I ordered from Canonical a long time ago. I went through all the graphical options just like the first time I installed 9.10, and it's in the process of installing right now.
I don't really have time to futz with it because I need my laptop for when I go and visit my mum for Thanksgiving. Maybe I'll try after the holidays if I can get some feedback on what might have gone wrong with 10.04.
View 9 Replies
View Related
Apr 29, 2010
I've looked in the grub.cfg file, and it has :
Code:
#
### BEGIN /etc/grub.d/30_os-prober ###
[code]....
View 3 Replies
View Related
May 11, 2010
I have a 10.04 installation upgraded from 9.10 somewhere around the first beta.However, since a couple weeks I have the problem that I cannot use nano anymore.
Code:
mypc:~$ nano
Segmentation fault
I've tried to do apt-get remove nano then installed but stil the same,Even tried apt-get purge but with no avail.
View 2 Replies
View Related
May 27, 2010
I upgraded 9.10 to 10.04 and now it won't boot. The way 9.10 used to boot was after turning on the computer it would go through the bios screen and then a screen would come up and list both operating systems, Windows Xp and Ubuntu. XP would be highlighted and would normally boot if I did not change the highlighted area. If I changed the highlighted area to Ubuntu it would boot into Ubuntu 9.10. Now after doing the upgrade, it gets to the same screen with the two operating systems listed.
When I change the highlighted to Ubuntu an error message is briefly displayed and then it goes back to the screen that lists both operating systems. I think the error message says something like couldn't find Ubuntu, or something similiar to that. Windows XP runs fine when I highlight Windows XP in that first screen, but I want to be able to run Ubuntu. I have Ubuntu on a secondary drive, but shouldn't it have rewritten the upgraded files on that same drive that had 9.10 on it?
View 9 Replies
View Related
May 30, 2010
I upgraded the Ubuntu 10.04, and afterwards I can't print. Cups won't detect printers, hp-setup won't, hp-probe won't. Tried rebooting, reinstalling HPLIP, & CUPS. Installed latest version of HPLIP. did a purge of HPLIP and CUPS, and reinstalled, rebooted.
View 4 Replies
View Related
Jun 20, 2010
I had upgraded to 10.04 but can not use kernel 2.6.32-22.32+, I had to go back to kernel 2.6.31-21. because of the default video driver had change from the one kernel to the other, and I do not know how the correct it. In 2.6.32-22 the font would change and to a smaller size and I can barely view anything because it looks like some two year old puke a box of crayons all over the screen.
Second issue is it does not matter what power-saving mode I am in, in 5 minutes time it with go into suspension. Or right after coming out of hibernate, it will go into suspension indefinitely and no coming out of it and must to a hard boot.
View 6 Replies
View Related
Jun 24, 2010
i just upgraded from 9.10 to 10.04 and now i cant get win xp to boot. win xp will show up on the grub list but when i select it all i get is a blank screen with a cursor flashing in the top left corner. i dunno whats happend, i have never had many problems with dual boot.
View 6 Replies
View Related
Oct 17, 2010
Upgraded to MM and it boots, desktop and apps run but cannot access synaptic - gives brief error message. In terminal, ran "sudo apt-get update" and got this message:
Reading package lists... Error!
E: Problem parsing dependency Depends
E: Error occurred while processing gsfonts (NewVersion1)
E: Problem with MergeList /var/lib/dpkg/status
E: The package lists or status file could not be parsed or opened.
View 1 Replies
View Related
Dec 4, 2010
While using Ubuntu 10.04 my system worked perfectly, now that I've upgraded via the Upgrade Manager, there is no sound on my system. My computer is very Ubuntu friendly, as I've never had this problem with any other version of Ubuntu. What can I do? If I need to reinstall 10.04, or roll back to 10.04, how do I do that? If I can fix by reinstalling 10.10 how do I do that. I dual boot with Windows 7 Pro and Ubuntu 10.10.
View 1 Replies
View Related
Feb 18, 2011
So I was on 8.04, and I decided to hit the upgrade button on the gui to upgrade to 10.04. Well the upgrade went fine and all...until I rebooted. Now I get this
Starting up .
mount: mounting none on /dev failed: No such device
udevd[984]: error getting socket: Invalid argument
error initializing netlink socket
udevd[984]: error initializing netlink socket
[Code]...
I found some other posts and tried adding the rootdelay=35 and acpi=off but those did not fix it. This is a virtual machine running on VMWare ESXi 4.1.
View 9 Replies
View Related
Apr 29, 2011
I have Lubuntu installed on my EEEP 1005HAB. I just successfully upgraded to Naughty Narwhal and it is asking me for my username and password. They don't work. I type my name and password in exactly like I did every time I logged in before, and nothing happens, it just gives me a blank username box again.
View 4 Replies
View Related
Apr 30, 2011
After upgrading to Ubuntu 11.04 I only get the text mode login. I have a ATI Radeon HD 3600 card and before upgrade I used the propiertary driver (to make the dual screen mode work).I have tried to download the driver again from ATI and installed that but it does not helped.I have put the Xorg.0.log and some other outputs in http://83.251.70.81/X/
View 3 Replies
View Related
May 6, 2011
I just loaded the new upgrade and now the top bar does not appear.
If the cursor moves over the top bar area the menus drop dow, but every else is black-- power button, wireless icon,... all gone.
How do I get these back?
View 4 Replies
View Related
May 17, 2011
I upgraded from 10.10 to 11.04 via the update manager and somehow in the middle of it, the package failed. And so I carried on using the ubuntu, rebooted and now the disk is not ready and cannot mount. Press S to skip or M for manual recovery. Skip does nothing, only can use manual recovery.I tried everything from the ubuntu forums & google from other people who had the same problem. The problem is my root terminal on manual recovery doesn't have networking.Only can use liveCD which I still can't connect to the internet because I use wlan0 from ndiswrapper.
I am a dual booter of Ubuntu 10.10 on one partition and Windows XP on other. I edited the grub to boot those. One HDD is partitioned into 2 drives so one partition holds XP and the other partition is a "translator" that holds files which both ubuntu and XP can access. (don't ask me why, I cleaned the dust off my PC recently after 3 years )My outputs are:
/boot/grub/menu.lst
Code:
title LINUX - Ubuntu 10.10 - kernel 2.6.35-28-generic
root (hd1,0)
kernel /boot/vmlinuz-2.6.35-28-generic root=UUID=85de06c5-cf3e-46b8-8c14-2c217be8dd9d ro vga=0x317 splash
initrd /boot/initrd.img-2.6.35-28-generic[code]....
- I commented the UUIDs, that doesn't work.
- I tried remounting it, no effect.
- I fsck'ed it, no effect.
- I booted using LiveCD but cannot connect to the internet due to wireless.
- Cannot apt-get update & upgrade due to no internet.
That's all I remember cos I basically tried alot different ways and cannot get it to boot.I am thinking of formatting the mess and start all over again but I don't really want to do that because it is a good system, just that the grub file and fstab is kinda cluttered.
View 7 Replies
View Related
Sep 1, 2011
I recently upgraded my vps from 8.04 to 11.04.
When I run apt-get upgrade I get
Code:
If I try apt-get install -f I get
Code:
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
Suggested packages:
The following NEW packages will be installed:
View 1 Replies
View Related
Jan 12, 2010
I've got a toshiba A135 series. I installed 9.10 from a live cd, and the installation process went fine.
When I rebooted the computer, it loaded up giving me the option to select one of the following:
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Memory text (memtest86+)
Memory test (memtest86+, serial console 115200)
I chose the first one, hit enter and the computer went to a black screen with the cursor up in the top left corner blinking away. Then nothing. I've read that this distribution is giving folks a lot of trouble. Has anyone had this same thing happen to them after a clean install?
View 1 Replies
View Related
Jan 13, 2010
I need to register some dll files in ubuntu. I used following command n it gives an error,
HTML Code:
Z:home haraka>regsvr32 "C:Program FilesUnion Assurance HRMAlerts.dll"
err:module:import_dll Library MSVBVM60.DLL (which is needed by L"C:\Program Files\Union Assurance HRM\Alerts.dll") not found
Failed to load DLL C:Program FilesUnion Assurance HRMAlerts.dll
View 3 Replies
View Related
Feb 2, 2010
I recently upgraded to the 9.10 version of Ubuntu. Now my screen freezes from time to time and I cannot click on anything. I must do a hard reboot by holding the power button of the PC. Is there a fix for this? Is there a way for me to go back to 9.4?
View 3 Replies
View Related
Feb 5, 2010
This the second time it has happened after the security upgrade to kernel 2.6.31-19 with a clean shut down it goes into the grub menu and will not boot.
View 9 Replies
View Related
