Upgraded 5 days ago, just noticed no audio or internet icon on the panel (internet works tho).I've tried different things i/'ve found on the forum, including editing thingd in the preferences>startup applications part, nothing has worked. I've an old laptop and not sure what info you need. Audio worked fine before the upgrade..
View 4 Repliessince i upgrade my pc to 10.04 lucid i cannot get any audio when i play videos on the web. i can have tried videos, comcast, hulu, etc... the video plays just fine, but no audio. i can go to apple.com and play videos just fine with audio. i can play any other audio just fine (mp3's, cd's, etc...). so i have narrowed it down to possibly a flash player issue. i have tried flashplayer-nonfree, flashplugin, etc... and no luck. here is where it gets weird. i saw a similar post and they tried creating a new account and it worked. so i tried that. i created a test account and all of the videos play just fine without any issue.
does anyone know if there is a way to rebuild or repair an account in ubuntu? i have checked all of the group memberships and they all match the new account that i setup.
After upgrade to 11.04, my headphones won't work when connected to the front audio jack. I checked alsamixer and they aren't muted. Switching to "analog headphones" on the volume icon didn't did anything. I can only get audio from the rear port.
View 7 Replies View RelatedI just upgraded to 11.04, and apart from an initial freakout because I didn't realize why all my settings were borked*, I haven't had any difficulties... until today. I ran my virtual WinXP machine (VirtualBox) to watch some streaming Netflix, and the sound didn't work. Sound still works under Ubuntu just fine. No idea why it didn't survive in my virtual machine.
I noticed when I started that it said there was an upgrade for the VirtualBox software, so I did that, but that didn't fix it either. I'm using PusleAudio for the Host Driver and ICH AC97 for the audio controller on my virtual XP machine. These worked before the upgrade, now... not so much. I tried switching the driver to ALSA and the controller to SoundBlaster 16 (and other different available combos, etc), to no avail.
* It turns out that crap pile, Unity, did away with all my nice custom panel layouts and configs and replaced them with something ugly, unwanted, and non-intuitive. I'm using "Ubuntu Classic" now because Unity is horrible.
I have had few problems up until now with my Hardy Heron 8.04 system. I was notified of the upgrade and decided to do it yesterday. When it didn't work, I posted last night and today couldn't locate the post even searching my posts. When I boot the computer I end up with this on the black screen: Ubuntu 10.04.1 LTS dell desktop tty1
I login with user and password and have this:
richard@dell_desktop:~$
Now what? I have no Internet connection. I noticed in some error messages during the upgrade that python is not working. I can't even shut down the computer. I disconnect it from AC power and pull out the battery!
I don't know any commands, really.
Will it damage my files if I just reinstall 8.04 from a CD? I am reluctant to do this because I am afraid all my files will not be available. Better still if I can type in the appropriate commands to 1)get my Internet connection working again, and 2)return my screen to a graphical user interface where I can access system and administration, repository,etc.
One message I got that may be relevant is: /usr/bin/dpkg returned on error code (1)
Update Manager gave the following message:
Code:
Not all updates can be installed
Run a partial upgrade, to install as many updates as possible.
This can be caused by:
* A previous upgrade which didn't complete
* Problems with some of the installed software
* Unofficial software packages not provided by Ubuntu
[Code]...
I'm a pretty new ubuntu user and I've just upgraded from 10.10. It seems to be working pretty well, except that I can't figure out how to connect to the Internet. When I click the wireless icon to try to connect, the drop down menu is as follows:
Wired network (grey/unclickable)
Disconnected (grey)
JackET N8 (grey)
Disconnected (grey)
3 Internet (white/clickable)
[Code]...
Loss of internet connection after upgrade from 8.04 to 8.10 Like the title says, I lost my internet connection after upgrading my Ubuntu system from 8.04 to 8.10.I used the downloaded automated method. It appeared to work fine on its initial reboot into 8.10. But I noticed the internet icon indicated loss of connection. Even so, I was still able to browse the net through Firefox. But then when I rebooted the next day the opposite was true: the connection icon indicated connection, but Firefox would not actually connect, nor would update manager. It has been like this since. This is a dual boot machine, and the Windows XP Pro side still connects to the internet as usual, no problems.So how can I make my new 8.10 system connect to the internet?
I use a Motorola SB4200 cable modem
[code]....
I upgraded to ubuntu 10.04 lts yesterday. The upgrade went smoothly. but now I have a very slow internet connection. It is as if I am on a dial up when I have a broadband speed of 20 MB. What can I do to fix or perhaps roll-back the installation to the previous proper working state.
View 3 Replies View RelatedI use the CD upgrade method to upgrade my kubuntu 10.04 to 10.10.Not to mention,the ISO image of the CD is this one :kubuntu-10.10-alternate-i386.iso.At the first run I choose YES for the prompt asking for internet connection or whatever, but I immediately realise that I have chosen a wrong option, so I exit and restart the upgrade all over again.On the second run, I choose NO for the prompt , then the installation continues until it reaches the 'fetching files' stage. It pops up and says "The upgrade has aborted. Please check your internet connection or installation media and try again. All files downloaded so far are kept."
I don't want to reinstall the whole system again because I want my applications;I don't want to use the updater to upgrade because I have a low internet speed .
I had clicked on the upgrade notification in Update Manager. After 3 hours of downloading, it stopped abruptly. Now when I try, I get a message saying could not download, check internet connection. I am able to visit other sites, and am actually downloading the CD itself without any problem.
View 2 Replies View RelatedI've upgraded my computer to 9.10. There is no audio output. I don't hear the quirky little sound when I boot up. There is no playback of my music library using mplayer or vlc. There's no audio from Hulu or the TV network's direct sites. I've enabled pulse audio -- I found a reference to it in someone else's post. Medibuntu is loaded and the codecs downloaded.
View 4 Replies View RelatedI recently upgraded to Ubuntu 10.04 and my sound is not working. I have a gateway p-6860FX. i've had this trouble since 9.04 and also in 9.10, but I worked around it by adding the following to my alsa-base.conf with
Code:
Sound worked fine after that, but it doesn't work with 10.04
Here are the results of aplay -L
Code:
I went in to alsamixer and turned everything up. it didn't work.
I've upgraded Ubuntu 10.04 to Ubuntu 10.10 yesterday and I'm experiencing some issues now.
Audio is out of sync for all videos I'm trying to watch in VLC (sync was 100% fine in Ubuntu 10.04).
following chained updates of my music server from 10.04 to 11.04 I no longer have any sound, which is sort of bad for a music server...Primary soundcard in the setup is USB So I tried the command posted in various "no sound" threads
sudo aptitude --purge reinstall linux-sound-base alsa-base alsa-utils linux-image-`uname -r` linux-ubuntu-modules-`uname -r` libasound2
Which reinstalled stuff as expected, except had this error in the output: Couldn't find any package whose name or description matched "linux-ubuntu-modules-2.6.38-8-generic" Could the error be because of backports?
aplay -l helpfully reports aplay: device_list:240: no soundcards found.
and the output from
wget http://www.alsa-project.org/alsa-info.sh -O alsa-info.sh && bash alsa-info.sh
can be viewed here:
http://www.alsa-project.org/db/?f=cb...54c3f65b70dec7
I just did an upgrade from 5.4 to 5.5 and now all of the sudden my audio is gone, can't hear any videos.
It was working fine under 5.4 right up until the upgrade. Speakers are AOK,
I have been using the streaming audio feature in Firefox for years, and have upgraded Ubuntu with each new release. I've never had a problem with streaming from my favorite radio stations until I upgraded to Natty. If I know the IP and use Audacious or another client, I can still stream through them-- but not from my browser any more. Flash-based content works OK too.I have upgraded two computers from 10.10 to Natty (desktop and laptop) and it has happened with both. the desktop is the 64-bit system (AMD), and the laptop runs the 32-bit OS (Intel). We have two other computers still running 10.10, and they're both still OK. I have uninstalled and reinstalled the xine plugin (which seems to do most of the streaming), VLC, and a couple of others. No luck. I don't think I see any gaps between the codecs installed for the 10.10 computers and the ones running Natty.I tried Chrome -- same result.
View 1 Replies View RelatedI have project which need to stream audio to multiple remotely connected devices on internet.the best protocol for streaming with minimum or no audio distortion.
View 1 Replies View RelatedI'm looking for one or more command-line applications to capture and record some Internet audio streamings (Winamp, Windows Media and Real Audio type).For Winamp streamings I tried streamtuner and it works good, but it does not support Windows Media eal Audio streamings.I have to call the commands using the command line, because I need to use them in batch mode.
View 1 Replies View RelatedI am running a 64-bit version of lucid that I just upgraded the other day. At first everything was working fine, but after some upgrades (don't remember which ones) I get an oss4-dkms error and I have no audio.
I have tried a bunch of things that I found online, but nothing has seemed to work and at this time I am a little lost.
Following is some information:
Is there any software for Linux that functions like Internet Radio Recorder and captures audio? If so, how come I cannot find anything in the Arch (ArchBang) repositories (seeing as though both distros use the same package manager and repos)?
View 4 Replies View RelatedI lost front audio after alsa upgrade to 1.0.23 headphone and mic doesn't work anymore . Anybody out there who can help a newbee.
HDA-Intel - HDA ATI SB VIA VT1708S ALSA Information Script v 0.4.59.doc
ALSA Information Script .doc
I have just upgraded to Fedora 14, with some hope that a F13 kernel crash issue would be resolved. Alas, not, and I have lost audio in one of my sound cards. I am using 2 sound cards in my computer. The first one (VT 1708 on the M2V MX SE motherboard) is used for FLDIGI (ham radio program). The other one (Creative Labs SB Live!) is tied to a speaker/microphone. At some point in mid 2010, I started getting kernel crash reports (not sure which kernel version this started), and the VIA VT 1708 audio controller stopped working. The SB Live! card works fine.
From mesg, I get:
[9.181148] WARNING: at drivers/pci/pci.c:105 pci_ioremap_bar+0x2c/0x5b()
[9.181186] [<c05c36ad>] ? pci_ioremap_bar+0x2c/0x5b
[9.181194] [<c05c36ad>] pci_ioremap_bar+0x2c/0x5b
[9.181299] ALSA sound/pci/hda/hda_intel.c:2510: ioremap error
I've just pulled out the SB LIVE! card to see if it is causing the VT 1708 controller to fail...there appears to be no interaction.
From lspci -v, I get:
20:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 8290
Flags: fast devsel, IRQ 17
Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
Kernel modules: snd-hda-intel
So it seems to know it's there. How to get my sound back (and get rid of this kernel crash every time I start my computer)?
My audio worked completely perfectly running Fedora 14. I upgraded to Fedora 15 and discovered my audio no longer worked. As far as I know I didn't change anything. I do hear random pops and clicks from my speakers every few seconds. It's a bummer because this worked out of the box on Fedora 14 without any screwing around, and now it's totally broken in fedora 15. Everything else about my upgrade has been going pretty well, but life without sound is not nearly as fun and it's frustrating to have something not work that used to work just fine.
Here is some information and things I've tried:
- Just for grins I booted from the Fedora 15 live CD and observe the exact same issue as I see when I boot from my HD (just pops and clicks out of the audio.)
- motherboard: ASUS M4A88TD-V EVO/USB3 (using onboard audio)
- lspci reports: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
- cat /proc/asound/card0/codec#0 | grep -i codec reports: Codec: Realtek ALC892 (this is what the motherboard manual lists as the audio hardware.)
- I've run pavumeter as some have suggested and I see outputs on both left/right channels when audio is playing (but still hear nothing but clicks and pops.)
- I've run "alsamixer -c 0" and verified all my levels are maxed out.
- I've opened up the sound settings dialog box and made sure the correct hardware device is selected, tried different profiles, tested left/right speakers, still no progress at all.
- I know I have the speakers on and plugged into the correct output jack, but just for fun I tried plugging the speakers into each of the other possible jacks, but that didn't help.
- lsmod (fedora 15) reports:
I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
I'm a new openSUSE 11.2 user and lately I've been getting repeated notifications from KDE saying that "the audio playback device HDA Intel(AD198x Analog) does not work" I get audio if I stream videos off the Internet but Amarok can't seem to play audio.
View 1 Replies View RelatedI upgraded to a new(er) soundcard this morning on my Slack 13.1 desktop box. I ran alsoconf and got sound working in everything but Firefox flash. It's not specifically a flash problem; flash sound works just fine in Konqueror. It's a Firefox issue. I created the following login script in order to try and force the new card to be recognized as the default:
Code:
bash-4.1$ cat .asoundrc
pcm. !default {
type hw
card 1
} ctl. !default {
type hw
card 1 }
First my setup: Hardware Genuine AMD Athlon - 512 mg Mem - Nvida card & latest drivers - 80gb & 40gb drives - dvd read only & cdrw.
OS: Ubuntu 10.04 - tried standard desktop then the alt version now back to standard desktop.
Problem: Both optical drives recognise data disks and show them on the desktop. The dvd drive recognises any dvd and not only shows it on the desktop but also flashes up a requester box asking me which program I would like to use to play it. Nothing happens when I insert a music cd in either drive. Rhythm Box Music Player does not show a music cd available to play but does however show my iTouch when I connect it via usb. Btw iTouch is shown on the desktop when connected. What have I done: Fstab had no entries for either drive so I've researched and entered a line for each.The dvd fs is entered as iso9660,udf. The cdrw is using "proc" as a file system as it's the only thing that will show as mounted in Mtab. All else fails. Both drives show up in System/Administration/Disk Utility (irrespective of Fstab entries), therefore the system can see them. Also investigating through the Terminal shows both drives. how to listen to music cds on ubuntu 10.04. I wish to save my music then upload the same to my iTouch. It all worked so well in 8.04.
we do have cd rom of ubuntu gnome 10.04, offline how to upgrade from cd-rom
as i found links tutorial which shows upgrade from internet
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies View Related