Ubuntu Installation :: Error After Install To 10.04?
Mar 29, 2011
I updated my Ubuntu to 10.04.2 this morning, the install appeared to go smoothly. I restarted to find a message saying "An error occured while mounting /media/JM90-G8", "Press S to skip mounting or M for menual recovery".I tried pressing the S key and nothing happened, I switched the computer off and tried again, nothing. I have tried it 10 times now (including trying the 'M' key).If I press the down arrow key I get a more detailed description of the problem.
"/dev/sda1: clean, 324515/29982720 files, 1254604/119913168 blocks (check in 2 ounts)
NTFS signature is missing.
failed to mount /dev/sda1' : invalid argument,
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
I tried to install ubuntu 9.04 from wubi in windows 7 ultimate today. But it failed. I met a problem when installing: An error has occurred setting the element data. The request is not supported. The detailed information in installation log file is:
>>stdout= 01-26 13:29 DEBUG TaskList: # Cancelling tasklist 01-26 13:29 DEBUG TaskList: New task modify_bcd 01-26 13:29 ERROR root: Error executing command >>command=C:WindowsSystem32cdedit.exe /set {d29666c7-0a4d-11df-a945-002268e2b352} device partition=I: >>retval=1 >>stderr=An error has occurred setting the element data.
The request is not supported.
[Code].....
The request is not supported. I tried to use bcdedit /set <GUID> device partition=I: manually, but still have the same error.
During the installation, I kept getting tons of errors. Finally something came up saying that I had to abort the installation and it did some stuff. I tried running an application, but I got an error. So I restarted the system.
The normal screen came up where I had to choose the Ubuntu stuff (I'm new to Ubuntu) in the box. I noticed that it had gone to 8.10... which I had earlier before installing 9.04, which went great. So I chose the first on and the system failed to start. I rebooted and tried all the other options, but they all had errors. Now I'm booted to Windows.
I installed Ubuntu from a CD I created. But it is now outdated because it is 8.10, and I have already upgraded to 9.04. 9.04 to 9.10 is where stuff went wrong.
Today I installed suse 11.1 on my computer. After some time i was able to connect to the internet and the auto update program prompted for updates. after the updates were installed more updates were prompted. but now i get an error when i try to install them. edit: the error is "PackageKit Error internal-error: Installation aborted by user " if i try it manually i get an message "access denied to ......" how can i make my system update normal?
I just recently downloaded the newest Ubuntu 11.04. I burned it and the normal things you do, However, when i go to open it to install it, i get this error that you see in the pic that i have included
I downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:
* Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?
Just done my first ubuntu 10.04 install on a hp pavilion a320a, the install seems to have went well, though while it is shutting down and before rebooting the following error appears across the screen: [16866.760778 end_request: I/O error dev sr0 sector 504392]
Before this error appears at the bottom of the screen the error scrolls on the screen with a different number at the beginning of the error where 16866 etc (different number each line) remainder of the error remains the same maybe different sector number but not sure, there is way too many to write down in the time they are on the screen.
I get my fresh copy of Ubuntu 10.4 from Ubuntu shipit (thanks to ubuntu). But i can't intall it. it shows error while installing. i tried both with in windows and from boot, It shows some error with installer Installer has encountered a problem.
Then it runs live.i also tried it with downloaded alternate or other eddiiions of ubuntu, also tried ubuntu 9.
I dual boot Ubuntu, and Windows 7 on my WD Scorpio Black 1TB hard drive (if the HD matters). I burned a CD to install Ubuntu 10.10 (32bit Desktop). The installation was going smoothly until I got an error that it cannot install the Bootloader to /dev/sda, I tried all the partitions under that (/dev/sda1, 2, 3). And NONE of them worked. When it rebooted it went to "grub recovery" where I could no enter anything.
I had to reinstall Ubuntu 10.04 to get my computer back and it's now dual-booting Windows 7 and Ubuntu 10.04 again. This is a major issue and it's completely preventing me from installing Ubuntu 10.10 on my machine.
I have been using Ubuntu almost since it began, and I've never had an issue like this before. I do a clean install of every major new release. I want Ubuntu 10.10
I am using Linux Mint 9. I have an ATI HD4830 graphics card and i am trying to install the latest ATI drivers (ati-driver-installer-10-9-x86.x86_64.run) but get this error.
Just reinstalled 10.10 to go down to the 32 bit version and I get this message at the first restart after ubuntu prompts to download necessary drivers Don't remember if I got it last timeThis normal?I/O error, dev sr0, sector 537XXXxxx - as in there were A LOT of them
I am just now starting to go deeper than the surface of my computer so I am very much a beginner. I have downloaded Ubuntu 10.10 and have tried to install it by mounting the image and installing "inside windows." Next, upon reboot and selecting Ubuntu from the windows loader it eventually went to a colorful screen but stayed there... the first time I let it sit there for 20 minutes or so then restarted, uninstalled/reinstalled tried again... then I let it sit there for 3 hours, nothing. Next I tried to mount image and install "demo and full installation." This time upon reboot I choose Ubuntu from the windows loader menu and an error message came up. I will type it out below exactly as I see it because this is the same message that came up when a friend suggested I boot from a USB drive.
I decided to bite the bullet and upgrade to the 10.4 LTS from 8.10. Did a complete fresh install and chose to automatically clean off the drive and install the new system from scratch.I have three hard drives with the system on the smaller 40GB and the other two drives are 500GB and 2TB.
From what I can tell my problem probably stems from having the older Grub 0.97 on the system on another drive, but I can't seem to figure out how to purge it. When I mount the partitions, there is no /boot folder... The following is the output from the Boot Info Script:
Code:
Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for /boot/grub.
I understand this is a common problem but i can't seem to find a solution for it other than use gparted to partition your hard drive and install directly to the hard drive.
I am trying to load 10.10 through the wubi installer. I want to install the 64 bit version of ubuntu. My windows OS is 64 bit as well.
I download the wubi online and when i run it i get through the first step of picking how large i want the hard drive and my sudo password. I click next and it goes to download the 10.10 x64 ISO. After about 10 sec a firewall alert comes up and i say allow then right after that the wubi crashes and i get an error log that i will post below saying i dont have permissions. Ive also tried using the right click "run as administrator" option on the wubi from windows 7.
Ive also tried downloading the ubuntu 10.10 x64 desktop iso. i extracted it using winrar then ran the wubi that comes with that and i get the same issue. I find it funny that when your run the wubi from the install disk it still downloads another copy of the iso instead of asking for its location on your hard drive.
I like the concept of the wubi and i had previously installed 10.04 through the wubi and loved it. I had an issue with 10.04 after doing a lot of tweaking and I simply wanted to just remove it and install 10.10 fresh. I'm strictly using ubuntu for experimental and learning purposes so i dont want to install it directly to my hard drive.
I have a PC with below configuration.cpu intel core i5 650 boxed 3.2 ghz socket 1156MB intel P55 Chipset DH55P J BoxedHDD WD SATA 2Tb 64MB cacheI installed "ubuntu-10.04.1-desktop-amd64.iso", and looks grub2 is not installed properly. I do not see all the files in grub install folder.Please let me know, ubuntu-10.04.1-desktop-amd64.iso is the right installable or not.If it is right one, how to re-install grub2 properly.
I am installing Ubuntu 10.10 server on my HP proliant microserver using the USB flash drive option. the install goes great until the time when it copies files for the setup (after the keyboard setup) and the error message comesw up (can't read CD rom drive)?I have used serveral flash drives and used universal usb installer several times. however the installatioon alwasy gets stuck there.
I'm using ubuntu 10.04 beta 1. when I try to update & upgrade I get the following error:
Code: Setting up install-info (4.13a.dfsg.1-5ubuntu1) .../etc/environment: line 4: LC-ALL=en_US.UTF-8: command not found dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 127 Errors were encountered while processing: install-info
I ran the ubuntu 11.04 live CD on my laptop that had an earlier version of ubuntu (9 maybe??). I really liked what I saw so I used the Install ubuntu 11.04 wizard and chose the option to override the earlier version. During the 'Importing document and settings' step a pop-up entitled Failed to unmount partitions. the body stated: migration-assistant needs to mount a partition, but cannot do so because the following mount partition could not be unmounted:
/dev/sda1
The only app showing on the taskbar is the Install. this is running from the live CD.
I went through the procedure to install Ubuntu 9.10 alongside Windows XP. The installation completed without complaint. But when I reboot the PC I get the error message "Grub loading error: no such partition...". and the keyboard is dead. I am using a Sony vaio PCG-FR215H laptop on which I have fitted new HDD and CD-drive. I carried out the installation by first booting up a live version of Ubuntu on a USB thumb drive and then clicking on the 'install Ubuntu' icon on the Live Ubuntu desktop. (I coudn't use a Live CD to install as this fails for some reason). I regained use of Windows XP on the PC by booting with a Windows 95 boot floppy and typing "fdisk /mbr". So, does anyone know what might have cased this grub error? Also, are there ways to try and fix the problem manually. I.e. can I get a copy of good versions of the files that are likely corrupted and then replace the stuff that I will have written over when I did the "fdisk /mbr"?
I got the same error while installing (even though install works fine!) during installation and after it. Its Critical temperature reached, 3564 C, shutting down. Celcium value is not made up, its actually among those lines (four-digit).
I had another problem with installation, but I managed to install using nomodeset setting. My pc is a rock laptop (which is actually supposed to work well with vista instead.. oh wel..).
Any suggestions? I have tried installing with acpi=off, but it doesnt make any difference during installation or after it..
Also another error I got during some of my tests was: "init: Failed to spawn rc-sysinit main proccess: unable to open console: input error
On friday I tried upgrading my kubuntu karmic to lucid. The upgrade failed for reasons I've forgotten... the upgrader said it had run 'dpkg --configure -a' or something, which I assumed meant that it was restoring the OS to a usable state... which it did not and now I have a broken distro.TO THE POINT. I backed up my files and decided to do a CLEAN INSTALL of Lucid.
I downloaded the Ubuntu Server 10.04 64bit ISO and the universal USB installer, created a USB install disk and booted from it. I started the installation and right after keyboard setup I got an error saying Unable to read from CD-ROM, retry/abort. Looking at the alt-f4 log it was unable to find a file, fs-secondary.udeb I hit alt-f2 and cd'd to /cdrom/pool/main/l/linux (I think, this is all from memory) and found that file, almost. The file there was fs-secondaryblahblahblah.ude, no b on the end. I tried renaming it but the filesystem was mounted read-only.
So, cd back to / Type mount and hit enter. Take note of the cdrom entry, at the beginning of that line it will say /dev/? Mine was like /dev/svd0 or something like that. Remember whatever that is. Then type umount /cdrom Then type mount -t vfat /dev/????? (whatever your device was from earlier) /cdrom That will mount the cdrom rw so you can rename the file to .udeb Then press alt-F1 and press enter to retry and the installation will continue like normal.
I was trying to install Ubuntu 10.04 LTS on my windows xp. dowloaded and installed wubi. All worked well and system asked me to restart. After restart ubuntu was showing on multi boot screen, selected it. Then the system asked me to ESC installation or not, i didn't Esc. The Ubuntu screen was showing, but all of a sudden an error message saying INSTALLATION FAILED occurred.
My system Processor: Intel pentium IV Ram 1 GB Harddisk:- 160 gb
I was having issues with wireless connecting to a server, so i kept getting this one issue, and decided to let me friend take a look at the netbook through ssh openssh-server. The same error popped up. From there he wanted me to uninstall java-package... and got the error again. The following is said all throughout the different terminal statements.
[Code]...
I am running on a MSI U130 netbook, and using UBUNTU 10.04 remix netbook.
Any on solving this issue so that i can install stuff without getting this error all the time?
