Ubuntu Installation :: Can't Get Passed The "Who Are You ?" Screen
Apr 11, 2011
I just met someone I know three days ago who converted to Ubunto after yeeeaaars of using Windows only, and he was quite happy about it. He managed to convince me about installing it too. I was going through the installation for Ubunto 10.10 but can't get passed the "Who are you?" screen even though I try repeatedly. I filled in all the details but the "Forward" button won't highlight for me to move on. I was doing the installation without being online (mentioning that in case it makes any difference).
I have been trying to install ubuntu for a few days. After I select install on the first screen using live it will switch over to the UBUNTU splash screen. I can hear the CD drive and that hard drive working for about 45 seconds to a minute then nothing. It will just sit there on the splash screen for as long as I let it. By let it i mean hours. I and installing it on a Toshiba laptop with 1.6 ghz centrino processor, 160 gb hard drive, and 2.5 gigs of ram.
i am installing Ubuntu version 9.10 in VMWare Work Station 7 but i can't get passed to 'Install Ubuntu'. I tried pressing enter but it still won't load.
I purchased this computer the other day at a garage sale. The computer starts up and the logo/ubuntu pops up with the scrolling load bar beneath but thats all the farther it goes. The monitor will go blank and then just restart the process all over again. Any help would be much appreciated
screen just opened up saying UBUNTU is running low in graphics mode
the following error was encountered. you may need to update your config to solve this. code...
I'm trying to install F12 from the install DVD that I torrented but it's giving me a disk error when I try to install. The DVD loads but when I go to install, it crashes when loading initrd.img, saying:
isolinux: Disk error 10, AX = 4209, drive EF
Boot failed: press a key to retry...
The DVD iso does pass the SHA256 hash test, so that doesn't seem to be the problem. I'm using Roxio Easy Media Creator 9 to write the DVDs, which it seems to do without any problems. The only thing I haven't ruled out is Roxio - is this the problem or is there something I'm missing? If it is the problem, any suggestions for a better free Windows DVD burning program I could use?
I'm trying to ssh my ubuntu laptop with my android phone. But with the app I have (connectbot) I don't seem to be able to pass any args to the command. I want to pass the -Y command to allow my phone access to the screen on my laptop so i can use my laptop (somewhat) from my phone. Can you change the args passed to the command while it is running?
This is one of the strangest problems I've run into while programming. Maybe there's just something wrong with my version of gcc or something.
The main problem comes at this point in the code:
Code: po = makePoFromScorbotXYZPR(X, Y, Z, P, R); h = makeHB2GFromPo(po); printf("%le", *h[1][0]); //##################################### Here it has the right value printf("%s", "
I have a probably kind of unusual problem - when a USB stick is connected to the PC and data is copied from/to that stick, I need to know how much data has been copied. The data itself if not interesting, just how many bytes. I unfortunately don't have access to the program that does the copying, and most of the data doesn't end up on any drive (it just gets read and discarded), so I can't simply check the size of a target directory or something like that. I have had a look at usbmon, but that seems to produce way too much data - the normal case would be around 10 gig of data being read, and I can't have that blown up by a factor of 10 and lying around on the hard drive
I am writing a game in C with SDL. I can successfully display one image on the screen and animate it. However, I am having a lot of issues getting the background to display using the same method. I was asking for help on SDL related forums, but I determined that the issue is not SDL related, and it is actually a pointer issue. However, I can't find where I'm going wrong.
and it gives following error Quote: ssh: myserver1..myserver2: name or service not known I basically want to pass arguments from myserver1 to myserver3 to the script.
I have a script that i want to add some functionality to, but im new to python. Right now it runs command line as ./script https://server user passwd verbose , which returns alot of informtion. I would like it to be able to only return information for a particular function when a flag is passed. exp: ./script https://server user passwd verbose -m (for memory only)
Under the ClassesToCheck section are the different things that can be retrieved. I would like that when you run the script as ./script https://server user passwd verbose -m, it returns only the 'Memory' info. -c would be for 'CPU', etc... Also, i would like the OK at the end of the script to be the first line that is return in the output instead of the last.
I hope I'm posting in the right forum for this (since Scientific Linux is based on RHEL)...I downloaded the Scientific Linux 5.4 "Boron" Install DVD's, and I can't get the DVD to boot. It gets to the point where it tries to initialize SMP (I have a Core 2 Quad Q8200 processor), and it just crashes and reboots my computer. I've tried disabling ACPI, APIC and APM using the noacpi, no apic, and apm=off options, one at a time, and all 3 at once (since the problem seems to be with APIC, because it fails to initialize on all 4 of the processor cores)...does anyone know what I'm doing wrong here, or how I can fix this? I really want to run Scientific Linux, but I can't since it crashes.
The iptables has every rule set correctly, the users in the subnet works great, but I have the following issue.every user connect to a mysql running on the internet through the port 3306, the forward and masquerade do the job. Now I have a user in the outside, and he wants to connect to a mysql in a certain machine (Not the gateway), prerouting rules solve my problems, but all the packages from the inside users goes now to that certain machine. I would like something like if the package passed trough masquerade don't pass trough the prerouting rule, and if it come from the outside (Not a package that come from a petition from the inside) pass trough the prerouting rule.
after upgrading ClamAV to version 0.97.1 and run the command Code: clamscan -r -i / --exclude-dir=^/sys --exclude-dir=^/dev --exclude-dir=^/proc | mail -s "clamav scan report XYSERVER" xy@mail.com the following errors appeared:
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache 2 GB DDR3 ram 160 gb hdd Nvidia 9300m gs Chipset: I dont know sorry Model: Samsung R710
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
When I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e, 4 gig of corsair dual ram, ati 4850 graphics, onboard audio. ahci mode win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2, i had this configuration running fine for 2 months without boot loaders, on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
I have downloaded ubuntu 10.10 64bit and have also burned it to good disk at 4x speed. when i boot it from cd everything goes simple and fine till it comes to a mixed orange colour screen and then nothing goes further, it just halts there with this full blank screen. so i have to do a hard shutdown. then i tried wubi.it went good. after rebooting it asks for installation options. there are five of them. in the normal mode the same thing gets repeated again. but in safe graphics mode ubuntu gets installed but few errors are shown after installation. there is no graphical screen and only this text screen comes again and again.
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
I'm trying to install F11 on my old FSC Amilo Pro laptop. The installer starts fine, shows up on the screen fine, but the graphic installation window is wrongly positioned on the screen. It's about 300px too far to the right and about 300px too low on the screen, so that my Next, Back, Cancel buttons etc are off the screen.
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
