I upgraded from 9.10 to 10.4 this morning on my Dell Precision M2400 laptop. When I rebooted I got a half-black screen with lines. The top portion had 3 miniature login screens also with lines across and too tiny to see anything.I looked at my xorg.conf. It had this in it:
Code:
Section "Screen"
Identifier "Configured Screen Device"
[code]....
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
I upgraded my PhenomX4 machien from 11.3 hoping that it would fix the kernel crashes I am having.This morning was first use since upgrade via DVD. I have been logged out three times without provocation or warning, and just now the machine went catatonic, just flashing the caplock and scrolllock lights. Still rebooting so have not managed to look at the logs if any.In case it matters this is running plain X with fvwm; no Gnome or KDE, No desktop
View 1 Replies View RelatedI've just bought myself a E-MU 1820M audio interface for use in home recording after seeing online that a number of people have managed to get it working. The card replaces a Terratec DMX 6Fire (which i only managed to get outs from, no in's). I have done everything and anything suggested all on the forums and websites i can find and still no in's or out's at all, and no lights on the dock functioning.
Having tried and failed on a number of things i decided to see if Alsamixer had picked it up, only to be shown a blank grey window with nothing showing. I purged ALSA and started again (I have even done a fresh install of natty in case it was anything else getting in the way that i had done previously) but to no avail. I am using ALSA driver 1.0.24, which is the latest version, and according to the ALSA website, the EMU support was addded in post-1.0.15, so all should be well.
Failure to safely remove the USB with the following techniques:
1) umount /dev/sdd and I get the error "umount: /dev/sdd is not mounted (according to mtab)"
2) dolphin > right click the drive icon > safely remove: I get the error message "org.desktop.Hal.Device.Volume.UnknownFailure: Cannot open /media/.hal-mtab"
3) konqueror: sys:/info > click the drive eject button (nothing happens)
4) device notifier > click the drive eject button : I get a ERROR in Plasma Workspace that says "Could not unmount the device. One or more files on the device are open within an application" ... NOTE: this will happen on a fresh reboot with the folders of the USB never accessed, much less files being open on it.I have also noticed something similar when dealing with cds/dvds.... seems like I can only eject on a reboot.
As I mentioned before, I has having freezes while installing F12 (x86_64) with a GeForce 8600 GT. I was able to complete the installation by doing it with the "basic" video driver. However, I was still getting frequent freezes. I installed the testing Nvidia drivers, and the freezes went away. When it froze, it was a hard freeze -- it wouldn't respond to CTRL-ALT-DEL or SysRq (I did enable SysRq first). I had to do a hard reset.
View 7 Replies View RelatedOn friday I tried upgrading my kubuntu karmic to lucid. The upgrade failed for reasons I've forgotten... the upgrader said it had run 'dpkg --configure -a' or something, which I assumed meant that it was restoring the OS to a usable state... which it did not and now I have a broken distro.TO THE POINT. I backed up my files and decided to do a CLEAN INSTALL of Lucid.
View 3 Replies View RelatedI had to install Ubuntu 10.10 5 times before the boot problem was fixed, but only now to find that the Nvidia GE Force 3 Ti200 video card is NOT supported by the current Nvidia drivers and the legacy Nvidia 96 video drivers has a known bug which may never get fixed.Currently I am running the 1024 x 768 screen size under Nouveau, but how can I change this to 1920x1080 ? Will creating an xorg.conf file work?I did have the GE Force 3 supporting the new 1920x1080p monitors under VGA mode and the screen looked fantastic in the past.
View 1 Replies View RelatedThe problem with X not starting up started after I upgraded kernel from 2.6.38.6-26.rc1.fc15.i686 which is what the FC15 came with. Before that I had X, without installing the nvidia.com driver (whatever came with the stock FC15-XFCE spin).I tried booting the old kernel and at first it worked but X again would not run. Now, after, above operations (reinstall of kernel-devel + kernel headers and all dependencies like glibc-common, glibcs-headers, dkms, gcc..) booting the old kernel does not work anymore: the framebuffer animation of the Fedora logo fillingup freezes at some point almost at the end; HD LED blinking hard. Maybe this means fsck is running and I need to give it more time..? I'll leave it booting when I go for lunch and see how it goes...
View 5 Replies View RelatedJust downloaded the x86_64 iso, copied it to my USB stick and added a grub4dos entry for direct booting.
Code:
title Fedora 15 x86_64
find --set-root /linux/fedora64.iso
map /linux/fedora64.iso (hd32)
map --hook
chainloader (hd32)
[Code].....
While it does mention nouveau, and I do use Nvidia graphics (PCIe GT 240) I believe the cause may be something else. Googling around leads me to a couple of forum threads that seem to relate to the core series of Intel processors, but I'm at a loss. I've also searched this forum however the search seems to either bring up every result under the sun and non seem to apply or no results at all. I know the card's supported as Ubuntu works flawlessly. I also tried booting in safe graphics mode, however the exact same thing happens.
I doubt using a USB stick in this manor would cause this problem, but if you suggest it i'll install from physical media.
I would post logs, however the shell it drops to seems to be severly limited (lacking reboot, even).
I installed the nvidia driver from the vendors homepage. But since it does not support regulation of brightness (and the display is that bright that I want to downlevel it), I wanted to go back to the default display driver which is the nouveau driver.So I uninstalled the nvidia driver and then I realized that I didn't make any backup of the xorg.conf file prior installing the nvidia driver. Shame on me, yeah.Now when the x-server started, it couldn't find the nvidia driver. Okay, fair as it was removed. Next to that my keyboard becomes unresponsive. That's really aching as I can not switch to a text-based console any longer.I'm able to boot into initmode 3 by editing the kernel parameters in the boatloader. I'm also able to edit the xorg.conf with vi in the shell then and start the xserver to test things by calling xinit.
I already tried to recover a bit from this situation by removing the references to the nvidia driver and replaced it with some information I could find on the nouveau homepage - but no luck so far, keyboard still freezes and login window does not appear. I could take a look into the xorg.0.log which warns me about the keyboard getting disabled but I do not really understand why. Next to that I find some other additional information. My computer experience is quite okay, but I'm somehow new to Fedora, I started half a year ago with Fedora 13 on my other laptop which worked like a breeze.
I wondered where I can find information about how to configure the xserver in the default configuration, if there is some reset functionality or so, that brings me back to installation defaults. Those worked ok for the nouveau driver. Unfourtionatly I was not able to gather the correct package name that would probably had helpded me by removing and installing it again.Next to fixing my setup, I had another idea as this is a quite new install to just re-run the install again on to that machine. Is this possible with keeping the files in my homedir?
I had installed my NVIDIA 9500GT driver on my fedora 13 by disabling nouveau, so should i enable it back after installing NVIDIA driver?
View 2 Replies View RelatedCan this be done similar to some other O/Ses so Nouveau doesn't pre-screw up the kernel for 3rd party drivers??? Would be great in F16 if we were given a choice re: wanting nouveau or not. I simply can not get F14 or F15 to work with the 270.xx drivers on recent equipment.
View 10 Replies View RelatedAlthough I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies View RelatedI keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies View RelatedI am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.
View 2 Replies View RelatedI'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.
If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager
The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.
I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.
View 1 Replies View RelatedI am begining on Ubuntu Server Management I would like to receive your on this doubt In order to have my Ubuntu Server up to date and with the last security patches, is it enough to do:
sudo apt-get update
sudo apt-get upgrade?
If not, please where I can find an easy guide in order to keep or mantain my server OK? Also, what are the risks when we do: sudo apt-get dist-upgrade?
doing an upgrade from 10.4 to 10.4 LTS and got this error:
Could Not Calculate Upgrade
An unresolvable problem occurred while calculating the upgrade:The package 'skype' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
When I tried to upgrade to Ubuntu 10.10 using commandsudo apt-get dist-upgrade the following error is thrown:Setting up netbase (4.35ubuntu3) Installing new version of config file /etc/services.
[Code]...
I am trying to upgrade from 10.4 to 10.10. I have never had a problem upgrading before with the Update Manager. Now I get an error message when using the Update Manager. The message says, "Could not calculate the upgrade". See screenshots. I also checked the package manager for broken packages and came up with nothing.
View 2 Replies View RelatedI'm running Ubuntu 10.10 and 2.6.35-27-generic. When I run the Upgrade Manager, the 'Distribution Upgrade' window pops up and in bold letters reads 'Running partial upgrade'.
The next line reads '>Preparing to upgrade' and sits there. Mean while, the process begins to perform a great deal of constant hard drive activity. The window's horizontal activity bar reads 'Calculating the changes' at the bottom of the 'Distribution Upgrade' window.
I'm trying to upgrade from 9.10 to 10.04 LTS I've followed [URL] Everything is updated. But, i don't receive the message "New Ubuntu release..." Will I have to download the entire DVD?
View 7 Replies View RelatedI would like to install 10.10 preferably right now.But I'm having issues, dist-upgrade won't upgrade me for 10.04 to 10.10.I tried to go into my Update Manager, but it's not recognizing any new Ubuntu versions.I don't particularly want to wipe my system, so what should i do?
View 4 Replies View RelatedI've experienced the great functionality that nouveau gives me, but am a bit disappointed that it cannot support 3D acceleration. I play a few games so this is a requirement.I don't want to switch completely back to the NVIDIA driver because it breaks my brightness control keys on my laptop, and it isn't as fast and responsive as nouveau.Is there a way to have nouveau run by default, but when I launch a game in a separate X server it would load the NVIDIA driver?
View 2 Replies View RelatedI installed the nVidia 3rd party driver before removing the Nouveau Driver, this means that when my computer is done booting i'll just have a black screen, being able to do nothing. Can i somehow solve this using a live CD? or is there a simpler way? Ubuntu can't boot in recovery mode neither, so it kinda sucks. Anyway, i'd like someone to tell me how to do this.
View 9 Replies View RelatedI tried to upgrade from Fedora 8 to Fedora 12, but after preupgrade got everything ready I rebooted. Anaconda searched for storage devices and then said "No upgrade root found". What can i do to continue the upgrade manually?
View 1 Replies View RelatedI have nomodeset when I boot my kernel, as I want to switch between nouveau and nvidia proprietary drivers within a session.
However, nouveau won't load, complaining that kms isn't enabled (xorg.log excerpt):
Here is the lsmod:
Am I missing something or isn't it possible to have nouveau without KMS? I have done a bit of searching, and everything I find points me back to enabling kms in the kernel.
Linux zen 2.6.32-5-xen-amd64 #1 SMP Tue Jun 14 12:46:30 UTC 2011 x86_64 GNU/Linux
