Ubuntu Installation :: 10.10 - ATI Xpress 200 Driver (Segment Fault)

Nov 10, 2010

Ok before anyone tells me to use the open source drivers. Did that and the 3d was messed up. Wine + eve online = fail. This is where this adventure began.

lspci | grep VGA
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)
System:
HP Dv5130ca AMD Turion 64
Glxgears:
Segment fault

ATI Proprietary Linux Driver-8.30.3 from the documentation seems to support this card. But no make install package for 10.10
ATI Proprietary Linux Driver-10.9-x86_64 fails on sudo ./
Error: ./default_policy.sh does not support version
default:v286_64:lib32::none:2.6.35-22-generic:; make sure that the version is being
correctly set by --iscurrentdistro .....

View 3 Replies


ADVERTISEMENT

Ubuntu Multimedia :: ADS Technologies Inc. DVD Xpress B Driver Is Disconitnued?

May 23, 2010

I have a ADS Technologies, Inc. DVD Xpress B see here and here. The product is disconitnued and followed by the DX2. Both devices have identical specs and everything. So I was hoping I could get ubuntu to work with it. So I tried using this driver.

It doesn't work so far. I tried changing the device usb info in the source so it includes this older device, but it doesn't work.

View 3 Replies View Related

Debian Configuration :: ATI Radeon Xpress 1100 Driver In Squeeze?

Mar 4, 2011

Alright, Lenny has a working "fglrx-driver" package for my laptop, but Squeeze does not. Would it be possible to install the one from Lenny on Squeeze since Squeeze has newer libraries and such? I know I can't install new stuff with older libraries, but can I install the old stuff with newer libraries? I am at the end of my rope here! I mean ATI sucks and we all know this, but I've always found a Linux/open-source alternative that worked, until Squeeze.

View 10 Replies View Related

SUSE / Novell :: Which Ati Video Driver For Ati Radeon Xpress 200 5954 - Pcie

Jun 24, 2009

I have a fresh install of suse 11.0 and there is no 3d acceleration available. If I use the suse repository, which driver do I need to enable 3d accesleration? The video is integrated on the motherboard. The box is an hp pavilion a1130n and amd 3500+ processor. I installed the same suse 11.0 on a dell box with an ati 128 rage and 3d was enabled after the install.

View 2 Replies View Related

Ubuntu Installation :: MBR With Vista - 'segment Offset Error' With The Boot Loader

Jan 10, 2011

I have had a strange experience in upgrading to Ubuntu 10.10 on a Dell Inspiron 1545 also running Vista. I was upgrading from a Ubuntu 8.04 that I thought would be worth reporting/sharing in case others have had a similar experience. last week I upgraded to Ubuntu 10.10 using the live cd. Everything seems have gone smoothly. I could log in and out of ubuntu. After logging into Vista and logging out, the next time I tried to start the machine, there was a 'segment offset error' with the boot loader and there was no way of rebooting into anything except to use the Ubuntu live CD and go to a terminal and reinstall the bootloader. The same thing happened after logging in to Vista- this seemed to mess with the boot loader. Logging in first time was not a problem.

Yesterday I started again, wiped out 10.10 and re-installed ubuntu but version 10.04. Logging in and out of Vista is so far ok and I have not had any problems. I do not have an obvious logical explanation to the sequence of events unless there is a problem with the boot loader in version 10.10.

View 1 Replies View Related

Fedora :: Nvidia Driver Segmentation Fault At Boot?

Aug 12, 2010

Fedora 13-64. While booting the nvidia driver has a segmentation fault:

Code:
Enabling the nvidia driver: /etc/rc.d/init.d/functions: line 530: 1406 Segmentation fault "$@"[FAILED] It is not a problem when using the notebook's led/mouse/keyboard. The problem is when I'm using an external monitor/mouse/keyboard. In this case I must first boot using the notebook until it gets to the login screen when I can start using the external configuration. That is annoying because the notebook seats under the table and must be put over the table to boot. The notebook model is HP DV6 2173 CL with a discrete GeForce G105M

My other notebook running Ubuntu works exactly as needed. The whole boot process is shown and controlled by the external monitor/mouse/keyboard.

View 5 Replies View Related

Fedora :: Enabling The Nvidia Driver: /etc/rc.d/init.d/functions: Line 530: 1254 Segmentation Fault [FAILED]

Jul 17, 2010

Whenever I boot my system, I get this error:

Quote:

Enabling the nvidia driver: /etc/rc.d/init.d/functions: line 530: 1254 Segmentation fault [FAILED]

I also noticed that 3d acceleration was not working... I always launch Blender to test if 3d works, but not luck

My system:

Code:

2.6.33.5-124.fc13.x86_64
Nvidia GeForce 9800Gt
akmod-nvidia 195.36.24

Yes, nouveau is blacklisted:

Quote:

kernel /vmlinuz-2.6.33.5-124.fc13.x86_64 ro root=/dev/mapper/vg_desktop-lv_root rd_LVM_LV=vg_desktop/lv_root rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rdblacklist=nouveau

[code]....

View 14 Replies View Related

General :: Allow Telnet From One Ip Segment?

Mar 8, 2010

I want to allow only ip segment(212.154.75.0/24) to telnet the server(RHEL-7.3).How this can be done using iptables?In the server i gave this command:

# iptables -I FORWARD -s 212.154.75.0/24 -p tcp --dport 23 -j ACCEPT
output is
0 0 ACCEPT tcp -- * * 212.154.75.0/24 0.0.0.0/0 tcp

[code]....

View 3 Replies View Related

Ubuntu :: Grub2 Win 7 Error - Reloc Offset Out Of Segment

Mar 15, 2010

I am dualbooting Karmic, windows 7, and fedora. When I boot, Grub2 will boot everything but Windows 7. Instead it says:
Code:
reloc offset is out of the segment
abort.

I've tried reinstalling and updating grub2 and I also tried grub. It wasn't a problem until I put Lucid on a 4th partition that's always been there. I let lucid install grub2 and after that windows didn't work, but I got the same error when I reinstalled it from karmic. I got a different error from grub (that I don't remember), but I wasn't positive about the configuration so that may have been my fault.

View 1 Replies View Related

Networking :: Squid With Multiple IP Segment?

Jan 13, 2011

I've setup Squid - DHCP - Transparent Proxy with the following
eth0 = connected to internet
eth1 = connected to lan. (192.168.1.1)

[code]....

View 5 Replies View Related

Red Hat :: Yum Failed To Map Segment From Shared Object?

Apr 13, 2010

I've got a redhat 5.5 machine which is supposedly up-to-date according to RHN. When I try to do anything with yum, I get the following error:

Code:
There was a problem importing one of the Python modules
required to run yum. The error leading to this problem was:

[code]...

View 4 Replies View Related

Server :: Two RHEL 5.4 Clusters On Same Network Segment?

Jul 23, 2011

Two years ago, I have set up two node Active-passive cluster on VSphere 4.0 and it is in production ever since.

I've tried to setup another cluster for testing purposes on the same VSphere, and failed. And what is interesting is that those new two nodes came up with cluster.conf of the production cluster, even though I did not try to bring them in the existing production cluster. I googled a bit and found something stating that two different clusters might behave strane if on the same network segment. Question is, did anyone try to create two different clusters on the same hardware, or on the same network VLAN?

I will do some more digging after weekend, and get back to you.

View 1 Replies View Related

Hardware :: Kernel Double Fault, Laptop Froze On Distro / Getting Error Double Fault: 0000 [#1] SMP?

Jun 19, 2010

My laptop's been locking up in Linux (Ubuntu, Backtrack, Puppy) periodically for a while now. When it locked up, it was always immune to the magic of SysRq, which I thought might indicate a hardware problem. It became so bad that I had to stop using the laptop.

Today, when I turned it on and tried to boot into Fedora 12, I got the following error (just once, it just locked up at various points during the splash screen after this once):

double fault: 0000 [#1] SMP
last sysfs file:
CPU 0
odules linked in:
Pid: 1, co m: swapper Not ta nted 2.6.32.11-99.fc 2.x86_64 #VGN-T 250N
RIP: 0010:[<ff

All the seemingly missing letters were really missing, not my typos.

As you can see, kernel version is 2.6.32.11-99.fc12.x86_64 and my laptop is a Sony Vaio TZ 250N (Core 2 Duo ULV 1.2GHZ). Note that with the other remaining kernels from the updates, nothing ever happened other than the locking up. The core temperatures hover pretty high, about 55-60C peak but this is still below the critical temp. Memtest came up clean when the problem first started happening.

View 3 Replies View Related

General :: Control The Segment Selector Assigned To A Section?

May 30, 2010

I see from dumping executables that seg selector 0x10 is assigned to my stack segment and to my data segments (.bss .data COMMON). The code is using 0x08. My question - how can I control this? I've looked at all the command line options and don't see it. I have a different program that uses 0x10 for code and 0x18 for data. I note that the second program has i386 in the architecture field in the linker script, whereas the first one referenced has i686. Is this what causes the difference? I understand that this architecture field triggers something regarding a library named BFD - is this where I should look? If so, where do I find it? I am runnig fedora. Is there a way to control the association of sections in the linker script with segment registers? I can set up segments in the gdt and can asign them to segment registers. I can - when writing in assembler - assign code to a section. I can relate a segment in the gdt with a register.But I dont see how to tell the section which segment register it is associated with Finally I see that the gcc compiler decides - based on how I initialize a variable - whether to put it into bss or data or COMMON. Do I have any control over this?

View 1 Replies View Related

Ubuntu :: 8.10 And 10.10 With ATI Radeon Xpress 1100?

Dec 1, 2010

I have an Aspire 5100 with ATI Radeon Xpress 1100 and have been happily running Ubuntu 8.10 until now when support has ended. I continued with 8.10 because the graphics have been fine with my system.I also have 10.10 installed and apart from the graphics, I would have no problem changing/upgrading.The problem is the glare, after a while it is very hard to work on.Is there anything I can do that's not to technical to reduce the glare.

View 5 Replies View Related

Programming :: Shell Script To Read A Certain Segment Of A Text File?

Jun 15, 2010

I have a text file that looks sort of like this:

Code:
blah blah blah
tons of unimportant stuff we don't care about

[code]...

View 3 Replies View Related

Ubuntu Installation :: Segmentation Fault Installing Gcl?

Feb 4, 2010

When I install GNU Common Lisp, and run (help), it suggest that as a next step I run (HELP 'CONS). This halts with a segmentation fault.<br>When I attempt to install the CVS version, the installer compains and bails, also with a segmentation fault.<br>If the fault in my hardware, or is it a program bug that should be reported to someone? If hardware, how do I force a full fsck on /dev/sda when I boot up?<br>Instinct tells me the problem is in gcl (GNU Common Lisp, stable or CVS either one), because I'm not seeing problems otherwise.<br>

View 1 Replies View Related

Ubuntu Installation :: Update Manager Fault?

Nov 28, 2010

I have a small alert sign in my notification area from update manager... I created the fault myself, which was very stupid and now i don't know how to fix it.It says:Failed to download repository information[URL], E:Some index files failed to download, they have been ignored, or old ones used instead. What i did wrong, because i know only very little about ubuntu, was: I was trying to ad another software source in Software center - edit - software sources -other software... And then by trying to delete what i added, because i was just playing around i think i deleted something else as well.

View 6 Replies View Related

Ubuntu Installation :: Segmentation Fault On Apt-get Upgrade?

Apr 18, 2011

My computer sporadically gets segmentation faults multiple times daily, but when I try to upgrade, it consistently faults on the download. I've runCode:sudo rm /var/cache/apt/*.binbut it still faults. I'm at a loss with this, is there something else I can do to solve the segmentation faulting

View 2 Replies View Related

Ubuntu Multimedia :: ATI Radeon Xpress 200 With Lucid?

May 29, 2010

I'm running Ubuntu 10.04 on a PC with the integrated Radeon X200 card. Currently, I have the free Radeon drivers, but they're either awful or aren't working properly. I get some wonky graphics errors, and any 3D game crashes as soon as the 3D graphics are to be displayed.

My card is no longer supported by fglrx. What can I do?

View 9 Replies View Related

Programming :: Find Out - How To Detach And Delete Shared Memory Segment When Hit Crtl-C

Mar 4, 2011

I have a program that creates and uses a shared memory segment. I am trying to find out how to detach and delete this shared memory segment when I hit crtl-C, and I still need the process to terminate.shmdt() and shmctl() have variables that are local to the main passed to them(shared and shmid)

Code:
//Prototype
void leave(int sig);
//part of code trying to use signal handling
if(signal(SIGINT, leave))

[Code]...

View 3 Replies View Related

Debian :: ATI Radeon Xpress 200 ?

Dec 17, 2009

I have been using Debian for a few weeks now (love it, besides it being a little bulky). and have everything going besides wireless and my graphics card, the former being less important to me. I haven't had any problems running Debian without a graphics card, but I know I will need it to play games, configure a 3d desktop if I choose, etc...

View 14 Replies View Related

Ubuntu Installation :: Thunderbird Segmentation Fault After Upgrade To 10.04?

May 13, 2010

Since upgrading to 10.04 Thunderbird doesn't work properly. It is Thunderbird 3.04. It works for locally-created users but exits with 'segmentation fault' when the user is from LDAP. In the latter case, the home directory is local, created by pam_mkhomedir. I get the same problem with a newly-installed 10.04 system.

I cannot understand why it worked fine in 9.10 but not in 10.04. I set "set -x" in the thunderbird script and here is the trace from that:

$ thunderbird
+ moz_libdir=/usr/lib/thunderbird-3.0.4
+ found=0
+ progname=/usr/lib/thunderbird-3.0.4/thunderbird
+ dirname /usr/lib/thunderbird-3.0.4/thunderbird
+ curdir=/usr/lib/thunderbird-3.0.4
+ basename /usr/lib/thunderbird-3.0.4/thunderbird
+ progbase=thunderbird

[Code]...

View 9 Replies View Related

Hardware :: ATI Radeon XPRESS 200M - Ubuntu Maverick

Apr 9, 2011

I have a problem with my video card since I installed Ubuntu Maverick. Compiz is working, I have Desktop effects and everything but.. i have a lot of troubles too. I can't watch full size video in ..... (it's very slow or totally freezing every time i try fullscreen option). Google Earth working, but when zoomed too much (to see map closer), i am seeing a lot of lines and strange pixels.

Everything was working good on CentOS, but after getting into Ubuntu.. something went wrong. I think the problems are coming from the drivers.

I have this drivers installed:

Code:

I followed this guide - https://help.ubuntu.com/community/RadeonDriver - for installing everything again, and I also added the Xorg Edgers PPA [url]. When I have xserver-xorg-video-radeon & ati drivers installed, my system have all the problems listed above and don't have 3d acceleration (which I need a lot for running Cedega and VMWare).

This is output from glxgears (while having the drivers installed)

Code:

And this is glxinfo in verbose mode:

Code:

(notice I have Direct Rendering, but not 3d acceleration, since it have troubles with the driver.. but the file is in the same folder it's searching for it)

When I remove them from the system (purge), and I use only the Edgers PPA and:

Code:

I can watch full size video at ....., my computer hibernates and wakes up after (which is causing a lot of problems if I'm using the xorg-ati & radeon, laptop freezes requiring hard restart). I can use Google Earth without having troubles, but.. still can't run Cedega and VM, because I don't pass the tests for 3d acceleration.

This is output of my glxgears & glxinfo (in verbose) after removing the drivers and restarting X.

Code:

View 5 Replies View Related

Ubuntu :: ATI Xpress 200M Loading As R300 ( Radeon 9700PRO )

Jun 5, 2011

i'm running Kubuntu 10.04 with KDE4.5 on HP DV5000 and i have problems with the video drivers as usable look where is the problem

LIBGL_DEBUG=verbose glxinfo
name of display: :0.0
libGL: XF86DRIGetClientDriverName: 5.3.0 r300 (screen 0)
libGL: OpenDriver: trying /usr/lib/dri/tls/r300_dri.so
libGL: OpenDriver: trying /usr/lib/dri/r300_dri.so

[code]....

I don't get it on [URL] say R300 is for Radeon 9700PRO/9700/9500PRO/9500/9600TX, FireGL X1/Z1 (2D only) and RS400 is for Radeon XPRESS 200/200M IGP ( What HP DV5000 have ) But in the middle of the info i have OpenGL renderer string: Mesa DRI R300 (RS400 5955) 20090101 x86/MMX+/3DNow!+/SSE2 NO-TCL on lsmod | grep radeon i have

radeon 901424 2
ttm 54611 1 radeon
drm_kms_helper 30726 1 radeon

[code]....

View 1 Replies View Related

Programming :: Save / Load Data Segment Of Dynamically Loaded Shared Object Library?

Aug 25, 2010

Our application uses a dynamically loaded shared object library (codec library) to compress and decompress audio streams.

There happens to be several static and global variables in this shared object library. Hence it is not possible to process two interleaved unrelated media streams using this shared object codec library because each stream corrupts/changes the contents of these static/global variables.

Is there a way through which a context save (save contents of data segment of shared object) and a context load (load previously saved contents of data segment of shared object)operation can be performed on the shared object library. This way the context for each media stream can be saved and loaded before and after processing the "other" media stream respectively.

View 3 Replies View Related

Hardware :: Can't Start X On Radeon Xpress 200M

Aug 22, 2010

I can usually solve this type of problem myself, but this time around I'm totally stumped. Can anyone lend a hand? A little background: I have an HP Pavilion ZV6233NR with no screen installed, connected through the VGA to my LCD TV. This is a somewhat older desktop replacement laptop. I have repurposed it to run as both a server and a media center (e.g. it connects to my TV). I'm upgrading from Debian Etch to Debian Squeeze (never installed Lenny). With Etch, I used the proprietary fglrx driver, however the fglrx package in Squeeze doesn't support such old hardware (obviously), but the new foss radeon driver does.

The problem: First, suppose I run X with no arguments, the (EE) and (WW) lines in /var/log/Xorg.0.log read (excluding missing font files):

(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(EE) open /dev/fb0: No such file or directory

[code]....

I've attached the full Xorg.0.log for that second case (radeon driver using the conf file), in case that helps. Three things I've tried (but for all I know bungled, test me if you think I might have):Fresh installation from the CD. (In case I had left over fglrx stuff lying around.) Horizontal and vertical refresh rates for the screen (although I didn't actually look them up in the LCD screen's manual).
Setting modes in the screen section to restrict the resolution and/or color depth.

View 1 Replies View Related

Ubuntu :: Running An ATi Radeon Xpress 200 (integrated Graphics) With The Default Drivers?

Jan 30, 2011

I've found that whenever I play a 3D game on Ubuntu, the graphics go crazy and make the game unplayable. I've found this an various games such as SuperTuxKart and Alien Arena.By the way, I'm running an ATi Radeon Xpress 200 (integrated graphics) with the default Ubuntu drivers.

View 3 Replies View Related

Debian Installation :: Synaptic, Aptitude Do Not Run - Segmentation Fault?

Mar 24, 2010

Synaptic does not run. When I start it from Menu/system/administration/synaptic package manager , it asks for root password, then crashes. Nor does aptitude from the root terminal.localhost:/home/user# aptitude

View 14 Replies View Related

Debian Hardware :: Video Acceleration For Xpress 200M?

Mar 13, 2010

I installed Lenny on my HP/Compaq nx6125 (the Sempron 32 bit model). Although X is running OK, I can't get video acceleration working. Games like Nexuiz are unusable, and programs like Stellarium and Google Earth simply fail to load. i attached some information below.

Currently, I had the free radeon driver installed. The non-free fglxr drivers are available, but I read that they do not support old chipsets like the 200M. I would like to know some pointers or instructions on how to get acceleration working. Most of the information I read seems to be outdated.

tommy@tardis:~$ glxgears -info
Warning, xpress200 detected.
GL_RENDERER   = Mesa DRI R300 20060815 x86/MMX+/3DNow!+/SSE2 NO-TCL
GL_VERSION    = 1.3 Mesa 7.0.4

[code]....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved