Ubuntu :: Ibiza Rhapsody And Gnomad2 - Files Transferred, Can Not Play?

May 31, 2010

I just purchased an Ibiza Rhapsody the other day, and installed Gnomad2 to transfer my library of mp3's to it. Once the transfer finished, only about half the number of songs showed up on the Ibiza as there were songs I was transferring over. All of them are proper mp3 files. Also, none of the files that transferred over can be played by the Ibiza. Sometimes it pops up an error message that it can not play the audio, but mostly it sits on the song and does not play. It reads the title and artist out of the MP3, but I guess it doesn't get the real data, considering the lack of playing, coupled with the fact that it does not show a length/timeleft for the song when I go to play it. In adddition, other mp3 players I've used come up in the filesystem, mount, etc, and you can browse it, directly paste in mp3's, etc (Makes life much easier). With this, it does not show up on the desktop like the others do, and I do not see it in the filesystem whatsoever. Upon plugging in, Ubuntu does realize something is happening, but thinks it is a camera and tries to import pictures. It's weird, because apparantly Gnomad picked it up (considering it transferred some files).

View 3 Replies


ADVERTISEMENT

Debian :: Gnomad2 2.9.4 Crashing On Squeeze / Error 4 In Gnomad2[8048000+28000]?

Mar 28, 2010

I recently installed Debian Squeeze on my desktop, replacing an Ubuntu 9.04 variant (CrunchBang). Since then, I've been unable to use gnomad2 to scan my 30GB Creative Zen Touch. Here is the relevant portion of /var/log/messages:

Code:
Mar 28 17:31:38 squeezebang kernel: [170473.176033] usb 2-4: new high speed USB device using ehci_hcd and address 10
Mar 28 17:31:39 squeezebang kernel: [170473.309328] usb 2-4: New USB device found, idVendor=041e, idProduct=413e
Mar 28 17:31:39 squeezebang kernel: [170473.309334] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 28 17:31:39 squeezebang kernel: [170473.309339] usb 2-4: Product: Creative Zen Vision:M
error 4 in gnomad2[8048000+28000]

I haven't tried installing an older version under Squeeze, but that might be my next step.

View 2 Replies View Related

General :: Find Which Files Were Transferred?

Nov 30, 2010

Say someone logs into a Centos Linux box and SCPs a file from /root/ called 'textfile.dat'

Is there any way to log into the Centos Linux box, later, and see that textfile.dat was SCP'd from the box?

View 9 Replies View Related

Ubuntu Multimedia :: Watching Avi Files When Transferred To Usb Drive?

Feb 2, 2010

I transfer avi files on my usb drive to watch on my xbox. I have Ubuntu 9.10. When I watch the movie their are parts that skip or look messed up and sometimes freeze. When I transfer the avi files to my usb drive I do have a lot of other programs running so that could create problems when transferring the files. But it shouldn't right?

View 1 Replies View Related

General :: Rsync And Making Sure All Files Have Been Transferred Before Applying The Changes?

Nov 15, 2010

I was wondering if there is a way to tell rsync to only apply changes (delete, overwrite,create) only if all files in the file list transferred successfully.Just to clarify, this would essentially be putting a transaction around the transfer.

View 3 Replies View Related

General :: Rsync Error Message For Command - Files Could Not Be Transferred

Aug 10, 2010

I have rsync error message for this command,

Quote:
rsync -avr --delete --exclude lampp/tmp/* /opt/* /backup/opt/
rsync -avr --delete --exclude data/session/* /var/www/html/dmcatholic/* /backup/dmcatholic/

The error message is here.

[code]....

sent 1917154 bytes received 384128 bytes 5731.71 bytes/sec total size is 12220966785 speedup is 5310.50 rsync error: some files could not be transferred (code 23) at main.c(892) [sender=2.6.8]

View 8 Replies View Related

General :: Can't Open Downloaded Rhapsody Software On Ubuntu 10.10?

Jan 2, 2011

The file for their software downloads and then when I try to open it with the Archive Manager, it gives me this error:

End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive.zipinfo: cannot find zipfile directory in one of /home/jeff/Downloads/RhapsodyReal.EXE or /home/jeff/Downloads/RhapsodyReal.EXE.zip, and cannot find /home/jeff/Downloads RhapsodyReal.EXE.ZIP, period.

View 2 Replies View Related

OpenSUSE Multimedia :: Play Avi-files In 11.4 - Can't Seem To Play .avi Files?

Nov 24, 2010

I just installed 11.4 and its working like a dream, only I cant seem to play .avi files. does anyone know a solution for this?

View 8 Replies View Related

Ubuntu :: 10.04 Allow Use Of Gnomad2 With Creative Zen 30GB?

May 1, 2010

ive already logged a bug on launchpad but it hasent been fixed yet. Basically i cant use a program called gnomad2 to access my creative zen 30 GB media player. I was able to do this under 9.10.

View 9 Replies View Related

Ubuntu Multimedia :: Gnomad2 For Creative Zen X-Fi?

Apr 18, 2011

I installed gnomad2 on my ubuntu 10.10 system but it won't mount my Creative Zen X-Fi. Ubuntu itself recognizes it but Gnomad2 doesn't. The error message is this...

Device 0 (VID=041e and PID=4162) is a Creative ZEN X-Fi.
PTP_ERROR_IO: Trying again after re-initializing USB interface
Queried Creative ZEN X-Fi
Segmentation fault

View 2 Replies View Related

OpenSUSE Multimedia :: Play MIDI / Play Or Preferably Convert (MP3) Old SNG Files?

Aug 11, 2010

I need to play or preferably convert (i.e. to MP3) old SNG files, which contain voice records. From what I could find, it's basically a MIDI created by synthetiser. I think it was recorded by some ancient VLC player. I failed so far to play it on anything I could download.

View 4 Replies View Related

Debian Multimedia :: Can't Play MP3 Files With Play (sox)

Mar 10, 2015

I have tried to play mp3 files with sox play.

The result I get is:

play FAIL formats: no handler for file extension `mp3'

I have installed all libsox packages I could find, including libsox-fmt-mp3 and libmad0.

sox -h though, gives me:

AUDIO FILE FORMATS: 8svx aif aifc aiff aiffc al amb amr-nb amr-wb anb au avi avr awb cdda cdr cvs cvsd cvu dat dvms f32 f4 f64 f8 ffmpeg flac fssd gsm gsrt hcom htk ima ircam la lpc lpc10 lu m4a m4b maud mp4 mpg nist ogg prc raw s1 s16 s2 s24 s3 s32 s4 s8 sb sds sf sl sln smp snd sndfile sndr sndt sou sox sph sw txw u1 u16 u2 u24 u3 u32 u4 u8 ub ul uw vms voc vorbis vox wav wavpcm wmv wv wve xa
PLAYLIST FORMATS: m3u pls
AUDIO DEVICE DRIVERS: alsa ao oss ossdsp pulseaudio

(no mp3 mentioned there).

The reason I try to play mp3 files with sox is that I wanted to play a playlist with different formats and feed it to ices2 through a pipe, ie :

sox Musik/storlista.pls -t raw - | ices2 ices-pcm.xml sox

FAIL formats: no handler for file extension `mp3'

View 3 Replies View Related

Ubuntu Multimedia :: Gnomad2 Stopped Working To Manage Creative Zen Micro?

May 1, 2010

I'm using ubuntu karmic 9.10. I used to transfer songs to/from my Creative Zen Micro firmware 1.11.01) using gnomad2 2.9.4 with no problem at all. Suddenly it stopped working. Gnomad2 seems to detect the zen micro but it hangs when "retrieving metadata from jukebox". The zen micro doesn't appear in "places" menu but Inot sure whether this is an issue...when I enter lsusb in a terminal it getsBus 001 Device 004: ID 041e:411e Creative Technology, Ltd Zen Micro

View 6 Replies View Related

Ubuntu :: Can't See Music - Transferred From 10.10 To Win 7

Mar 11, 2011

trying to add music to my ipad, transferred 800mbs of music from my ubuntu part to win 7 so i can sync with itunes but when i go into windows the music does not appear.

View 6 Replies View Related

Ubuntu :: LiveCD Settings Be Transferred On Install?

Jan 19, 2011

I am in a bit of a pinch here, as I had to get a server up and running fast after a crash, and then just configured a 10.04 LiveCD session to do what I needed. As you may figure, this is, however, not an especially good long term solution, so I will need to do a reinstall of the server. My question is: will the settings and installed software in the live session automatically be transferred when I do the install?

View 4 Replies View Related

Ubuntu Networking :: Forward A Copy Of Each Packet Transferred?

Feb 23, 2010

I manage a small home network of 5-6 PCs and other devices. One of the PCs is used as a multipurpose server, as well as the gateway to outside.

Sometimes, I need to know what traffic goes in/out of my network (for troubleshooting, etc).

Is there a quick and dirty way to forward a copy of all the packets on the external interface to my own ip when I want to?

View 2 Replies View Related

OpenSUSE :: OpenOffice Writer - Get Transferred Back To Page 1

Jun 1, 2010

Cannot paste URL When I middle-paste into the URL box in the Hyperlink toolbar, nothing happens. Misleading support link The support link in Help/Support shows the general Novell support page. It is not clear how to get support for OpenOffice from there (especially for openSuSE). Hyperlink toolbar button performs no action In order to place a hyperlink at the cursor, you have to click the pull-down menu by the hyperlink button on the toolbar. Clicking on the button has no effect.

I think it should be equivalent to inserting the hyperlink as text. Persistent extending hyperlink mode When you place the insertion point immediately following a hyperlink and start typing, the hyperlink text extends; there is no way to cancel that effect. In particular, in the situation when a new document contains only a hyperlink, everything you type, either in front or at the end, becomes a part of it. The only way out of this situtation is to clear the hyperlink text and press Enter; the hyperlink is then replaced with an explicit URL and you can type further without extending the hyperlink.

No apply on Close There is another undocumented button in the Standard Toolbar that opens the Hyperlink dialog box. This box behaves in a very peculiar way: when you click on the button [Close], the box closes without updating anything. In order to apply the changes you have to press [Apply] and only then [Close]. This is rather surprising (at least for me), although it is better understandable when you consider that the Hyperlink dialog box is modeless. Travelling paste Steps to reproduce:

1. Edit a long document (containing several pages).
2. Mark some text on Page 1.
3. Middle-paste the text on Page 3.

Observe how you get transferred back to Page 1.

View 9 Replies View Related

Server :: Squid Traffic Transferred For Monitoring Purposes?

Apr 13, 2010

I want to know that squid in 5 min ago and 1 hour ago how much traffic transferred for monitoring purposes?? where can I get this info from running squid? of course I get I have to note that access.log is disabled for some reasons.

View 3 Replies View Related

Ubuntu Installation :: Netbook Remix 10.04 - Transferred The Image To USB Drive To Make It Bootable?

Jun 10, 2010

I just brought a netbook(1005HA) and wanted to try out Ubuntu netbook remix 10.04 but I clean installed it.I like it but there are programs on Windows that I need to use for my HD2. My friend put a windows 7 .iso file on the netbook and I transferred the image to my USB drive to make a bootable USB but it does not boot. install Windows 7 from a USB using Ubuntu correctly?

View 1 Replies View Related

Networking :: (Netstat -s) Bits Or Data Packets Transferred Counts?

Sep 15, 2009

Using netstat I can get a lot of network related information which is pretty useful at times. But when I use for example 'netstat -s' it gives me a lot of counts for bits transferred or data packets transferred etc. Now one thing I am not sure of is that for how long those counts will keep rolling and when will they get reset (when I restart the machine?, when I restart the network services? Or if there is some kinda threshold set on it?) How exactly netstat counts those things (I mean what is the source of those counts for netstat).

View 2 Replies View Related

Server :: TSIG - Hand Master Logs - Transferred Denied?

May 4, 2010

i've 2 namesevrers running bind 9 and i restricted the transfer between the master and salve through the TSIG, The transfer goes well with no problem for all zones but when i make dig axfr domain.tld @master i got transfer failed and on the other hand master logs said that transfered denied?

View 4 Replies View Related

Software :: Boot From A Image Transferred To Internal Hard Disk?

Jul 20, 2010

I have a dvd I want to boot from, on a certain laptop. The problem is this:

DVD will NOT boot in laptop [1] with this DVD.
DVD WILL boot ok in laptop [2] with this DVD.
- Conclusion, DVD is ok.
* laptop [1] and laptop [2] boots other media in the cd/dvd drive ok.

I can see all files on DVD in both laptops. As a workaround I copied the DVD image off the DVD drive to internal hard disk with following command and the result was as follows:

- result of dd command
# dd if=/dev/sr0 of=/dev/sda4
6298816+0 records in
6298816+0 records out
3224993792 bytes (3.2 GB) copied, 473.18 s, 6.8 MB/s

How do I make that partition [/dev/sda4] bootable ?

View 2 Replies View Related

Ubuntu :: Cannot Play .dat Files From Cd?

Jan 4, 2010

am using ubuntu 9.10 .i hve a philips combo drive .my problem is that i can't play .dat files from cd's ,there is no problem with dvd's & other files from cd's .when i checked the permissions it showed the owner as root also there is a lock symbol in .dat files that are already in my pc .

View 5 Replies View Related

Ubuntu :: Any Way To Play SWF Files In 9.04

Jan 17, 2010

Can someone say me the way to play SWF files in ubuntu 9.04(Jaunty-Jackalope)?

View 6 Replies View Related

Ubuntu :: Play All Files With VLC?

Apr 1, 2010

Now I can play all my files with VLC. But now how to configure my keyboard shortcut keys like "play/pause", "stop", "nexttrack" for VLC. Only key working is "media",which shows VLC player when pressed. but other tabs do not work,why?

View 3 Replies View Related

Ubuntu :: Can't Play WMV Files In 10.04

May 2, 2010

Installed the w32 codecs in Ubuntu 10.04, but can't get the video to work in either Mplayer or VLC. Audio works OK, though.

View 6 Replies View Related

Ubuntu :: .WAV Files Won't Play

May 30, 2011

I get no sound from .wav files in Rthymbox or VLC etc etc. What package (s) am I missing?

View 3 Replies View Related

Ubuntu :: Play GSM Files In GUI

Aug 9, 2011

I have .gsm files , I used to play them using the command line

Code:

$play test.gsm

But am looking to play .gsm files in GUI. by the way I have tried to play them using Totem movie player & vlc player but none of worked.

View 1 Replies View Related

Ubuntu :: Cannot Play .dat Files

Aug 4, 2010

i have some old CDs which have videos with .dat extension on them i am unable to play these files on ubuntu (the movie player and vlc says that file format cannot be played). i searched for extensions but couldn't find any.

View 4 Replies View Related

Ubuntu Multimedia :: VLC Cannot Play Avi Files / What To Do?

Jan 15, 2010

When I try to run a divx avi I get this code...

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved