When I insert my Olympus camera xD card in the built-in card reader of my laptop I have no idea how to see the content.
dmesg shows SmartMedia/xD card detected in socket 0:2
(I'm running Ubuntu 9.10)
I'm posting this here because I know the knowledge database here is reliable. I'm mounting a smartmedia card with pccardctl insert 0. I do not know where the device would be located in block, bsg, or in sX. I'm using fedora 12 for this.
View 5 Replies View RelatedHow can I setup a lan connection using wireless pci card on entire system D-link DWA-510 card I have .
View 5 Replies View RelatedMy video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies View RelatedI recently installed a startech PCI usb expansion card...All went well and all external devices connected show up without a hitch. However a day ago The card/devices just STOPPED. I rebooted and no avail. Rebooted a second time got a IRQ 19 failure error. Then on a third try It showed up and worked fine... This has happened twice. Here's my IRQ print after running cat /proc/interrupts
CPU0 CPU1
0: 132 3 IO-APIC-edge timer
1: 0 146 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
I am assuming that the second to the last entry is the pci usb card. Is there a way to home in more deriectly to find and troubleshot the problem and see if its module or IRQ?
I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
View 1 Replies View RelatedI am wondering if it would be possible to format an 8g SDHC card in a way that it will be able to be written to and read by an SD reader?
Reading about SDHC vs SD suggests that the only difference is the block/cluster/byte configurations. Is that true?
Could I format the 8g FAT32 SDHC with gparted to a 1g FAT16 partition with the rest of the space left un-formatted so an SD reader could handle it?
Recently I had to replace my Hauppauge HVR-1600 (it was doing everything I wanted it to do but after a few years burned out) and decided to get the HVR-2250. Before purchasing I checked the forums and noticed that there was quite a bit of support and most everyone managed to get it working so I thought it would be a good idea.
The problem I have now is that, though lspci shows the card as Multimedia controller: Philips Semiconductors Device 7164 (rev 81); however, when trying to setup mythtv-backend, the card does not show up under the "capture card" section. After a few hours of research, I came across this thread and it seemed to be general consensus that the method worked so I tried it. Still no luck.I ended up formatting, fresh install of Ubuntu 10.10 and then installed MythTV and still nothing. Not really sure where to go from here.
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
I recently installed Xubuntu on my old P3 laptop (Compaq Armada E500 if anyone is familiar). The laptop is a bit old, so both wired and wireless networking is done via PCMCIA cards. I have 2 cards installed, one for each purpose. I can't find the dongle for the wired card right now, so I am trying to use the wireless card. I am able to find the network I want to connect to, and type in the password since the network is secured. It tries to connect but then pops up again asking for the password (I know it is correct). Is this card supported by linux/compatible? I tried finding drivers online but the sites that had drivers were down.
View 1 Replies View RelatedLooking for a card reader/writer that will support most current card types. I am running Fedora 12 x86_64 on a home-grown desktop. Are there any gotchas, that I need to watch for?Also, Internal vs. external, any benefits of one over the other, or is it just personal preference?
View 5 Replies View Relatedvery much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies View RelatedI have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
If i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
My soundcard (a Creative X-Fi Xtreme Music) is running with the unix-driver offered by Creative. But after a restart (without switching power off) I have to switch the sound device in xmms from ALSA to OSS. Also my tv card (an hybrid card from Hauppauge, WIN-TV HVR-1300) is only getting a signal after a restart, before there is no signal found. To get sound while watching tv I'm using one of the following lines, it seems to be random wich of them is working without error:
> sox -r 48000 -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp
> sox -r 48000 -c 2 -t ossdsp /dev/dsp -t ossdsp /dev/dsp1
So it looks like a problem in loading the modules in correct order, but I'm not sure. Perhaps there is also a problem with my nvidia graphic card (see list below for the kind of card), that I have installed with the unix-drivers from nvidia's webpage. To solve this problem I'm now searching since september, when I got my new computer, including:
-graphics: Lead896 D3 X GTX260 Extreme+
-CPU: Intel Core2Duo E8500, 3166 MHz, FSB 775
-mainboard: Asus P5Q-E, P45 F G SA
[code].....
I have just purchased a HTPC - cheap purchase pre-built from ebay - ideal size - small box - not too out of place in the lounge.The HTPC has one rj45 connection built on to the mobo, with a wireless card + aerial in the back (wireless broadband) and I am going to take the dtv card out and replace it with anothe rj45 card.I intend to run ubuntu server 10.10 on the server and I intend to connect my sky broadband through the server to give me the security of a server based firewall and the security of the server as a whole.
View 5 Replies View RelatedHow to get Device ID CF Card or all information about CF card?
Info: I use USB card reader to connected CF card
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies View Relatedi am using Fedora 12.
i have a 1 GB SD card and a 4 GB SD card.
Using a USB flash reader, when i plug in the 1 GB SD card, dmesg shows
Code:
usb 1-5: new high speed USB device using ehci_hcd and address 11
usb 1-5: New USB device found, idVendor=058f, idProduct=6331
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Mass Storage Device
usb 1-5: Manufacturer: Generic
[Code]....
(i was suspecting that it could be due to the 4 GB size being too large, but that's very unlikely, since i am able to mount a 16 GB micro SD card - through an Android phone though, not the USB reader.)
I got a vaio vgn-ar21s laptop that under yast reports to have a tv card: saa7131/saa7133/saa7135 Video Broadcast Decoder
However if I try to choose a tuner (bottom on the right bottom of the yast window for Manual TV card selection, I get "No tuner is available for the selected card".Can this be set up somehow under opensuse 11.2 ? I am running kernel 2.6.31.12-0.2-desktop x86_64
The card works under windows (I can see most digital tv channels [I am in the UK]), but I would prefer to use it under opensuse, of course.
I am trying to format 4 GB sd memory using mkfs.vfat. I want to use the card both in linux and windows so I am formatting with Vfat filesystem. When I format the card from command line with "mkfs.vfat -F 32 /dev/mmcblk1" I am getting a warning message like "unable to get drive geometry, using default 255/63" but the data in the card is erased.
But when I mount the card and checks for the size using df -h its showing 1 GB instead of 4 GB. how to format the SD memory card or any other alternate way to format the card.
I need to add a 2 port ATA PCI card to my (headless/no-GUI) server. I'm still pretty new to Ubuntu/Linux so I have no idea what's involved in getting the card to be recognized, installing drivers, etc. I suppose it would be easy to just install the card then reinstall the OS and start over, but that seems rather extreme. What's the proper way of going about this?
View 2 Replies View RelatedOkay well I have inserted my SD card into my pc.. but ubuntu doesnt seem to be picking it up? It's not showing any signs, i remember it use to show a little icon with the name of the card on the desktop or in the "places" menu but I dont see it.
View 1 Replies View RelatedI've recently purchased a HP 210 Mini. I've installed Ubuntu Netbook Remix through Wubi but have found to be ridiculously unreliable as the Update Manager always freezes!
I've reinstalled 4 times now and still no luck. So I assume that it will be better to install the .iso from the site. However my computer doesn't have a disc drive, so I wonder if there's a way to install Ubuntu from there, I mean it works for a USB drive.
I've tried everything--from the CLI to GParted and back--but I can't seem to format my SD card. I know it's not the card because it is recognized in three other devices, which offer to format it because they don't think it's formatted.When in GParted, I can create a new partition table and create a new partition, but after that completes, the card remains grey and the GParted tells me the disk label is unrecognizable.When I go at it with fdisk/mkfs.vfat, I'm told:
Code:
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x24edb58b.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)[code].........
I'm using an old laptop with a PC-Card bay and a cardbus WiFi adapter. If I remove the WiFi adapter to insert something else in the bay, Lubuntu locks up solid--even the mouse refuses to move. I assume I'm going about this wrong...is there a proper way to remove the adapter that won't crash the system?
View 4 Replies View RelatedI want to upgrade from my 128M video (on board) to a 512M card. Since so many problems seem to revolve around video cards, which one manufacturer would be likely no cause me little or no grief installing and running?
View 1 Replies View Related